Fishing gear and methods for off-shore fishing in Sri Lanka

The author describes the commercial viable off-shore fishing methods for catching known commercial resources available around Sri Lanka. He also describes the in-shore fishing methods such as bait fishery which are related and of prime importance for carrying out certain off-shore methods. The paper is intended as a background for the description of fishing methods. The methods discussed are: (1) Longlining for large pelagic species such as large tuna (yellow fin, big eye), shark, spearfish and others; (2) Drift-netting for small and large tuna species (skipjack, yellow fin and others), shark, spearfish, etc.; (3) Pole and line for all deep-sea pelagic species such as skipjack, yellow fin, frigate mackerel, etc.; and (4) Purse seining (small scale) for small pelagic species suitable as bait fish for pole and line and longline fisheries.

Challenges to effective fishing and preferred fishing gear in a hydrodynamic freshwater system

Challenges to fishing and preferred gear of multiple used Lake, whose water depth is controlled by opening of its dam gate were investigated. Geographic survey, interview and focused group discussion of fishermen were used to assess factors influencing effectiveness of fishing and the preferred gear of Asejire Lake. Water usage (s) such as frequency of Complete and Partial Opening of Dams Gate (CODG and PODG) were investigated as indices for hydrodynamic condition. Response during focused group discussion with about 33% of fishermen of the Lake were obtained on sources of disturbance to effective fishing (SDEF), most effective gear (MEG)- least environmentally perturbed gear, comparability of catch structure of preferred gear to conventional gear and sustainability of superiority of preferred gears in situations outside hydrodynamic condition (SSPPG). The PODG occurred 1-7times/Month-dry season, 15-18times/Month-wet season; CODG occurred 1-2times/Month in both season; Interval of CODG was 3-17 and 5-12days (dry and wet season). It affected set-net and catch. The SDEF were gear availability, weather condition, dam’s gate opening, religion activities and Health of fisher-folks. 50% respondents accepted opening of dams gate as most important disturbance while religion was least (5% respondents accepted). 60% respondents accepted traps as MEG being the least affected while 75% respondents accepted Gura cage trap as the MEG among traps.90% respondents accepted that among traps, its catch structure was closest (comparable) to conventional gear. However, 75% respondents rejected SSPPG. Opening of dams’ gate creates hydrodynamic condition and it affects fishing. Gura trap was preferred for fishing hydrodynamic condition.

Mesh selectivity for spotted seer, Scomberomorus guttatus (Bloch & Schneider)

An attempt has been made to evolve a suitable mesh size for the commercially significant size group of S. guttatus. To obtain maximum sustainable yield taking biological factors also into consideration, 52 mm mesh bar nets are suggested for exploiting the fishery on both the East coasts of India.

Fishing gear in freshwater reservoirs of India

Consequent on the great emphasis given to irrigation, power generation and flood control, several river valley reservoirs have been formed. The fact that these reservoirs support a fairly rich fishery potential needs no special mention. The total reservoir water area in the country is 6.4 lakh h.a. (16 lakh acres) and the yield is 5 to 8 kgm/h. a. in certain reservoirs, rising up to 40 kgm/h.a. in some of the highly productive ones.

Synthetic fibres for fishing gear

A variety of synthetic fibres are at present in use as fishing gear material, the earliest one being the polyvinyl chloride group introduced for traps in 1936 (von. Brandt 1957). Since then synthetic fibres became increasingly popular among the advanced fishing nations of the world. The latest synthetic fibre which has been successfully used in fishing is polypropylene developed in Italy in 1954.

Mesh regulation in backwater prawn fishing gear

Size grade composition of different species of prawn caught by various back water fishing gear have been enumerated. 57 to 75% of P. indicus captured was less than 10 cm in length. M. dobsoni and M. monoceros captured were less than 10 cm in length. A cod end mesh size of 20-25 mm has been recommended for stake nets for the capture of P. indicus of 10 cm length along with other species.

Selectivity of gill nets for Scomberomorus commersoni

Selectivity of gill nets for S. commersoni was studied with nets made of 4 different mesh sizes fabricated with 4 different specifications of nylon twines. Fishing operations were conducted off Cochin through the fishing seasons 1968-72. The commercially significant size group of S. commersoni was found to fall in the length range of 850-950 mm. The optimum mesh size required for the capture of this group of S. commersoni was estimated as 76 mm. bar in nylon twine 210/12/3. The relationship between the twine size and mesh size was also worked out.

Discriminant analysis for mesh selectivity studies

Discriminant analysis takes into consideration the natural correlation existing between different characteristics of fish when studying mesh selectivity. Some specimen data are presented for two different sets of fish and it is shown that the discriminant analysis shows a significant difference between the two sets where F test failed.

A demersal trawling gear for inshore waters along the west coast

Results of comprehensive efficiency tests of three tested designs of 15m bulged belly, 15.8m six seam and 29.26m longwing type trawls in combination with 114x57cm both rectangular flat and horizontal curved wooden otter boards are reported. Of the possible six combinations, the bulged-belly trawl with flat rectangular otter boards has performed better in landing prawns. Further this study has indicated the selective action of the different designs.

On statistical comparison of efficiencies of fishing gear

The distribution of fish caught by experimental gill nets has been found to be in the Poisson or Negative binomial form. Using this information, application of Chi-square test as suggested by Mood et al. (1974) has been illustrated, for comparing the efficiencies of gill nets. This test provides an alternative to Anova F-test especially in the context of significance of non-additivity for the two-way model. Based on the present work and the findings by Nair (1982) and Nair & Alagaraja (1982, 1984) an outline approach for statistical comparison of the efficiencies of fishing gear is presented.

Effect of sailkite in improving trawl gear performance

Effectiveness of sailkite has been evaluated in two trawl designs, namely, a 25m high opening trawl and a 32m large mesh demersal trawl, rigged with sailkite through full scale comparative field trials. A 25m high opening trawl showed significant increase in total catch by 54.4% ribbon fish (Trichiurus spp.) alone by 138.3% with a reduction in miscellaneous catch, comprising mostly small sciaenids and juvenile fish, by 13.2% while 32m large mesh demersal trawl showed an improvement in total catch by 9%, ribbon fish by 17.2% and miscellaneous catch by 7.7%. The difference in fishing performance between the two gear arrangements has been attributed to changed net mouth configuration because of higher head line lift and also the possible herding effect on the fish in the vicinity of trawl mouth, due to addition of sailkite.

Shark long line gear of India

Sharks are mainly harvested with long lines which is less expensive compared to other methods of fishing. Though this is a common gear operated along the coast, the gear in every region has its own peculiarities in construction and rigging. This communication furnishes detailed description of the gear operated in different centres. Suggestions are also offered to improve the gear and methods for enhancing production.

Statistical gear health analysis which is robust to fluctuating loads and operating speeds

Condition-based maintenance is concerned with the collection and interpretation of data to support maintenance decisions. The non-intrusive nature of vibration data enables the monitoring of enclosed systems such as gearboxes. It remains a significant challenge to analyze vibration data that are generated under fluctuating operating conditions. This is especially true for situations where relatively little prior knowledge regarding the specific gearbox is available. It is therefore investigated how an adaptive time series model, which is based on Bayesian model selection, may be used to remove the non-fault related components in the structural response of a gear assembly to obtain a residual signal which is robust to fluctuating operating conditions. A statistical framework is subsequently proposed which may be used to interpret the structure of the residual signal in order to facilitate an intuitive understanding of the condition of the gear system. The proposed methodology is investigated on both simulated and experimental data from a single stage gearbox. © 2011 Elsevier Ltd. All rights reserved.