Egg quality and fecundity in rainbow trout: the determining factors and mechanisms of control

This thesis considers the factors involved in the determination of egg quality and fecundity in farmed stocks of rainbow trout ( Salmo gairdneri R) • Measurements of egg quality, ie. percentage survivals of eggs and fry, from the production batches of eggs of seven fish farms, showed mean survivals of 70% to eying but levels of only 35% to 4.5g fry (approx. 130 days post-fertilisation). Under optimum conditions survivals may reach 85% suggesting that husbandry methods exert significant influences on egg quality. Chemical analyses of the protein, fat, vitellogenin, ash, amino acids, free fatty acid and mineral levels of eggs of varying quality and from parents of different strains showed compositional differences even between individuals of the same stock. However, none of these differences were correlated with egg quality. Egg size showed similar variations but, again under hatchery conditions there was no correlation with differences in egg quality. The only factor which has been shown to exert a significant influence on egg quality is the time of stripping after ovulation. At 1 0°C eggs should be removed from gravid females within ten days of ovulation to achieve optimum egg and fry survival. Studies of egg production from approximately 10,000 broodstock revealed that total fecundity and egg size increased and relative fecundity decreased with increasing fish size. In general, most fish appeared to produce a constant volume of eggs. This is consistent with a hypothesis that egg size can only be increased by parallel reductions in fecundity. Feeding broodstock at half-ration (0.35% body weight day- 1 ) did not affect egg quality but reduced total fecundity and egg size and increased relative fecundity when compared with eggs produced by fish on full-ration. Comparisons of regressions of total fecundity against fish weight for three strains using ANOCO revealed that one strain was significantly more fecund than two other strains considered. Trout of the same strain maintained on different farms behaved similarly suggesting there was some reproducibility of strain characteristics.

Ownership concentration:'Private benefits of control' and debt financing

Building on the ‘law and economics’ literature, this paper analyses corporate governance implications of debt financing in an environment where a dominant owner is able to extract ex ante ‘private benefits of control’. Ownership concentration may result in lower efficiency, measured as a ratio of a firm’s debt to investment, and this effect depends on the identity of the largest shareholder. Moreover, entrenched dominant shareholder(s) may be colluding with fixed-claim holders in extracting ‘control premium’. One of possible outcomes is a ‘crowding out’ of entrepreneurial firms from the debt market, and this is supported by evidence from the transition economies.

Governance of open content creation:a conceptualization and analysis of control and guiding mechanisms in the open content domain

The open content creation process has proven itself to be a powerful and influential way of developing text-based content, as demonstrated by the success of Wikipedia and related sites. Distributed individuals independently edit, revise, or refine content, thereby creating knowledge artifacts of considerable breadth and quality. Our study explores the mechanisms that control and guide the content creation process and develops an understanding of open content governance. The repertory grid method is employed to systematically capture the experiences of individuals involved in the open content creation process and to determine the relative importance of the diverse control and guiding mechanisms. Our findings illustrate the important control and guiding mechanisms and highlight the multifaceted nature of open content governance. A range of governance mechanisms is discussed with regard to the varied levels of formality, the different loci of authority, and the diverse interaction environments involved. Limitations and opportunities for future research are provided.

Development and verification of control and protection strategies in hybrid AC/DC power systems for smart grid applications

Modern power networks incorporate communications and information technology infrastructure into the electrical power system to create a smart grid in terms of control and operation. The smart grid enables real-time communication and control between consumers and utility companies allowing suppliers to optimize energy usage based on price preference and system technical issues. The smart grid design aims to provide overall power system monitoring, create protection and control strategies to maintain system performance, stability and security. This dissertation contributed to the development of a unique and novel smart grid test-bed laboratory with integrated monitoring, protection and control systems. This test-bed was used as a platform to test the smart grid operational ideas developed here. The implementation of this system in the real-time software creates an environment for studying, implementing and verifying novel control and protection schemes developed in this dissertation. Phasor measurement techniques were developed using the available Data Acquisition (DAQ) devices in order to monitor all points in the power system in real time. This provides a practical view of system parameter changes, system abnormal conditions and its stability and security information system. These developments provide valuable measurements for technical power system operators in the energy control centers. Phasor Measurement technology is an excellent solution for improving system planning, operation and energy trading in addition to enabling advanced applications in Wide Area Monitoring, Protection and Control (WAMPAC). Moreover, a virtual protection system was developed and implemented in the smart grid laboratory with integrated functionality for wide area applications. Experiments and procedures were developed in the system in order to detect the system abnormal conditions and apply proper remedies to heal the system. A design for DC microgrid was developed to integrate it to the AC system with appropriate control capability. This system represents realistic hybrid AC/DC microgrids connectivity to the AC side to study the use of such architecture in system operation to help remedy system abnormal conditions. In addition, this dissertation explored the challenges and feasibility of the implementation of real-time system analysis features in order to monitor the system security and stability measures. These indices are measured experimentally during the operation of the developed hybrid AC/DC microgrids. Furthermore, a real-time optimal power flow system was implemented to optimally manage the power sharing between AC generators and DC side resources. A study relating to real-time energy management algorithm in hybrid microgrids was performed to evaluate the effects of using energy storage resources and their use in mitigating heavy load impacts on system stability and operational security.

Social-cognitive antecedents of ambidextrous orientation in family-owned startups: The role of family ties, achievement motivation, and internal locus of control

Regulatory Focus Theory predicts that the motivation to self-regulate goal-directed thought and behavior depends on two distinct regulation strategies: a promotion focus based on attaining gains and a prevention focus based on avoiding losses. This study took a social-cognitive approach predicting that regulatory focus has an impact on how family startups (several family related founders) explore "new ideas", exploit "old certainties" and achieve the balance of both (ambidexterity), compared to lone founder startups (only one founder present). It was proposed that the social context of family ties among founders leads them to a prevention focus concerned with avoiding the loss of the socio-emotional benefits of those ties. In order to avoid such a loss, family founders were expected to increase their risk perceptions and thus, explore less than lone founders, who lack such socio-emotional ties. It was also proposed that two commonly used psychological traits in entrepreneurship research —achievement motivation and internal locus of control, predispose entrepreneurs to a promotion focus. Founders with a promotion focus, in turn, were hypothesized to lead startups to more risk-seeking behaviors and to more explorative orientation. The previous argument was used as a springboard to derive hypotheses about ambidexterity (the ability to exploit and explore simultaneously) and survival hazards. Using Regulatory Focus Theory, exploitative orientation, conceptualized as the motivational strength to continue on previous paths of action, was hypothesized to be not significantly different from that of lone founder startups. Taking previous arguments together, lone founder startups were hypothesized to be more ambidextrous than family startups. Finally, ambidexterity and internal locus of control were hypothesized to reduce survival hazards in family startups. The findings suggested that family startups explore less than lone founder startups even after controlling for group effects. Interesting but contradictory findings revealed that internal locus of control have both a positive direct effect and a positive interaction that increases the explorative and ambidextrous orientation gap of family startups over lone founder startups. As expected, ambidexterity and internal locus of control reduced survival hazards on family startups. Implications for practitioners were derived based on a sample of 470 nascent entrepreneurs.

A survey of control architectures for autonomous mobile robots

MEDEIROS, Adelardo A. D.A survey of control architectures for autonomous mobile robots. J. Braz. Comp. Soc., Campinas, v. 4, n. 3, abr. 1998 .Disponível em: Acesso: 27 set. 2010.

Evaluation of control devices for asphalt pavement recycling operations : summary report for research project HR-188, 1982

The objective of the research project was to seek acceptable solutions to the air pollution problem created in the asphalt recycling process using modified conventional equipment.

A survey of control architectures for autonomous mobile robots

MEDEIROS, Adelardo A. D.A survey of control architectures for autonomous mobile robots. J. Braz. Comp. Soc., Campinas, v. 4, n. 3, abr. 1998 .Disponível em: Acesso: 27 set. 2010.

Optimal Controller Designs for Rotating Machines - Penalising the Rate of Change of Control Forcing

In the context of active control of rotating machines, standard optimal controller methods enable a trade-off to be made between (weighted) mean-square vibrations and (weighted) mean-square currents injected into magnetic bearings. One shortcoming of such controllers is that no concern is devoted to the voltages required. In practice, the voltage available imposes a strict limitation on the maximum possible rate of change of control force (force slew rate). This paper removes the aforementioned existing shortcomings of traditional optimal control.