A new model for the immobilization of the rat hind limb

An alternative device for the immobilization of the hind limb of the rat was developed to study the effects of chronic disuse on the soleus and tibialis anterior muscles, maintained for 3 weeks in the shortening and the stretching positions, respectively. The proposed device is made of steel mesh and cotton materials, and has some advantages when compared to cast or plaster cast: it is cheaper, lighter (12 g or 4% of the body weight of the rat) and the same unit can be easily adjusted and used several times in the same animal or in animals of similar size. Immobilization is also useful to restrain the movements of the hip, knee, and ankle joints. Male rats (291 ± 35 g and aged 14 ± 2 weeks) were used to develop and test the model. The soleus muscle of 18 rats was maintained in a shortened position for 21 consecutive days and lost 19 ± 7% of its length (P = 0.008) and 44 ± 6% of its weight (P = 0.002) compared to the contralateral intact muscle. No difference (P = 0.67) was found in the stretched tibialis anterior of the same hind limb when compared to the contralateral muscle. No ulcer, sore or foot swelling was observed in the animals. Immobilization was effective in producing chronic muscle disuse in the hind limbs of rats and is an acceptable alternative to the traditional methods of immobilization such as cast or plaster cast.

Effect of heat input on the mechanical properties of welded joints in high strength steels

Experiments were carried out to determine the properties of the welded joints in 8mm thick high-strength steels produced by quenching and tempering and thermomechanical rolling with accelerated cooling (tensile strength 821–835 MPa). The dependence of the strength, elongation, hardness, impact energy and crack opening displacement on the heat input in the range 1.0–0.7 kJ mm21 was determined. The results show that the dependence of the strength of the welded joints decreases and that of the elongation increases. The heat input has only a slight effect on the impact energy and crack opening displacement in the heat-affected zone.

Effect of loading type on the fatigue strength of symmetric and asymmetric welded joints made of ultra high strength steel

In this study, finite element analyses and experimental tests are carried out in order to investigate the effect of loading type and symmetry on the fatigue strength of three different non-load carrying welded joints. The current codes and recommendations do not give explicit instructions how to consider degree of bending in loading and the effect of symmetry in the fatigue assessment of welded joints. The fatigue assessment is done by using effective notch stress method and linear elastic fracture mechanics. Transverse attachment and cover plate joints are analyzed by using 2D plane strain element models in FEMAP/NxNastran and Franc2D software and longitudinal gusset case is analyzed by using solid element models in Abaqus and Abaqus/XFEM software. By means of the evaluated effective notch stress range and stress intensity factor range, the nominal fatigue strength is assessed. Experimental tests consist of the fatigue tests of transverse attachment joints with total amount of 12 specimens. In the tests, the effect of both loading type and symmetry on the fatigue strength is studied. Finite element analyses showed that the fatigue strength of asymmetric joint is higher in tensile loading and the fatigue strength of symmetric joint is higher in bending loading in terms of nominal and hot spot stress methods. Linear elastic fracture mechanics indicated that bending reduces stress intensity factors when the crack size is relatively large since the normal stress decreases at the crack tip due to the stress gradient. Under tensile loading, experimental tests corresponded with finite element analyzes. Still, the fatigue tested joints subjected to bending showed the bending increased the fatigue strength of non-load carrying welded joints and the fatigue test results did not fully agree with the fatigue assessment. According to the results, it can be concluded that in tensile loading, the symmetry of joint distinctly affects on the fatigue strength. The fatigue life assessment of bending loaded joints is challenging since it depends on whether the crack initiation or propagation is predominant.

Sous-fermes des aides et droits y joints. Bail de Jean Girardin. Première publication

[Acte. 1749]

Délibération de MM. les régisseurs généraux des domaines du roi et droits y joints (concernant les remises aux employés de ladite régie sur la recette des droits d'amortissement, franc-fief et usages)

[Acte. 1724-02-23. Paris]

S. Délibération de MM. les régisseurs généraux des domaines du Roi et droits y joints

[Acte. 1724-03-24]

Délibération de MM. les régisseurs généraux des domaines du roi et droits y joints

[Acte. 1724-03-24]

Sous-fermes des domaines et droits y joints. Bail de Jean Girardin. Première publication

[Acte. 1749]

Travels and adventures in México : in the course of fourneys of upueard of 2500 miles, performed on foot...

UANL

The foot of the cross; or the sorrows of Mary

UANL

La torsion des métatarses : étude de sa plasticité chez l'humain

Il a été démontré que la torsion des têtes métatarsiennes est influencée par le mode de locomotion chez les primates et peut être utilisée pour déterminer la présence ou non d’une arche longitudinale chez les ancêtres hominines. Chez l’humain moderne, l’arche longitudinale rend le pied plus inversé que chez les grands singes, provoquant un léger basculement de l’axe dorsoplantaire de l’articulation proximale des métatarses. Ainsi, les têtes métatarsiennes subissent une torsion par rapport à l’axe de la diaphyse pour que leur surface plantaire reste parallèle au sol. Comme les femmes ont une arche longitudinale plus haute que les hommes et comme le port du soulier à semelles rigides provoque des changements morphologiques au niveau du pied, rendant l’arche longitudinale plus haute et l’hallux moins divergeant, il est attendu que la torsion métatarsienne soit différente selon le sexe et le type de soulier porté. Ce mémoire examine donc l’effet du contexte environnemental du pied et de la plasticité de la torsion des têtes métatarsiennes en comparant différentes populations humaines. L’échantillon disponible pour cette étude est constitué de 166 individus provenant de 18 sites archéologiques différents comprenant 57 hommes, 35 femmes et 74 individus de sexe indéterminé qui ont été divisés en quatre grands groupes : Amérindiens, Inuits, Militaires et Euro-canadiens. Il n’y a aucune différence de torsion entre les hommes et les femmes, ce qui suggère que la différence de hauteur de l’arche longitudinale entre les hommes et les femmes n’est pas assez importante pour être perçues au niveau de la torsion des têtes métatarsiennes. La topographie ne semble pas provoquer assez de modifications au niveau du pied pour provoquer une torsion différentielle des têtes métatarsiennes. Cependant, la surface du sol, plat ou accidenté, pourrait être un facteur modifiant ce trait. Finalement, le port de souliers constrictif à semelles dures comparativement aux souliers souples, tels les mocassins, provoque une torsion différentielle des têtes métatarsiennes. Les individus chaussant des souliers à semelles souples ont un premier métatarsien présentant une plus grande éversion et un troisième, quatrième et cinquième métatarsien présentant une plus petite éversion comparativement aux individus chaussant des souliers constrictifs. Ces résultats viennent appuyer l’hypothèse de la capacité plastique de la torsion des têtes métatarsiennes.

Ecological Foot Print Analysis-A Sustainable Environmental Management Tool for Kochi City

Kochi, the commercial capital of Kerala and the second most important city next to Mumbai on the Western coast of India, is a land having a wide variety of residential environments. The present pattern of the city can be classified as that of haphazard growth with typical problems characteristics of unplanned urban development. This trend can be ascribed to rapid population growth, our changing lifestyles, food habits, and change in living standards, institutional weaknesses, improper choice of technology and public apathy. Ecological footprint analysis (EFA) is a quantitative tool that represents the ecological load imposed on the earth by humans in spatial terms. This paper analyses the scope of EFA as a sustainable environmental management tool for Kochi City

Influence of Interface Surface Geometries In The Tensile Characteristics Of Friction Welded Joints From Aluminium Alloys

Friction welding is a solid state joining process that produces coalescence in materials, using the heat developed between surfaces through a combination of mechanical induced rubbing motion and applied load. In rotary friction welding technique heat is generated by the conversion of mechanical energy into thermal energy at the interface of the work pieces during rotation under pressure. Traditionally friction welding is carried out on a dedicated machine because of its adaptability to mass production. In the present work, steps were made to modify a conventional lathe to rotary friction welding set up to obtain friction welding with different interface surface geometries at two different speeds and to carry out tensile characteristic studies. The surface geometries welded include flat-flat, flat-tapered, tapered-tapered, concave-convex and convex-convex. A comparison of maximum load, breaking load and percentage elongation of different welded geometries has been realized through this project. The maximum load and breaking load were found to be highest for weld formed between rotating flat and stationary tapered at 500RPM and the values were 19.219kN and 14.28 kN respectively. The percentage elongation was found to be highest for weld formed between rotating flat and stationary flat at 500RPM and the value was 21.4%. Hence from the studies it is cleared that process parameter like “interfacing surface geometries” of weld specimens have strong influence on tensile characteristics of friction welded joints

A Comparative Study Of Tensile And Microstructural Characteristics Of Friction Welded Joints And Conventionally Welded Joints Of Aluminium Alloy 6061

Welding of high strength and low weight materials like Aluminium Alloys without any defects by conventional welding techniques is a major challenge in industries. Hence research on solid state welding techniques like Friction stir welding and Friction welding techniques have got much importance in joining of Aluminium alloys. However most of the industries are not changing conventional techniques as skilled workers are available on that area. Most common conventional welding techniques used for joining of Aluminium alloys are Gas welding and Arc welding. Friction welding is a solid-state welding process that generates heat through mechanical friction between a moving and a stationary component with the addition of a lateral force called “upset” to plast ically displace and fuse the materials. In this work, experimental study on tensile and micro structural characteristics of welded joints formed from conventional welding techniques and Rotary friction welding(suitable for weld specimens with circular cross section) has been carried out and the same were compared. The process parameters for arc welding used was 50-70 Amp reverse polarity DC and electrodes of 2.3mm diameter. In Gas welding, the parameters were oxy acetylene neural flame at 3200°C and 3mm electrodes . In the case of friction welding an axial pressure loading of 3Mpa with 5 MPa as upsetting pressure and 500 rpm were used to obtain good welded joints. Tensile characteristic studies of Arc welded joints and Gas welded joints showed 48% and 60 % variations respectively from the maximum load bearing characteristics of parent metal. In the case of friction welded joint, the variation was found to 46%. Micro structural evaluation of conventionally welded joints exhibited clear distinct zones of various weld regions. In the case of friction welded joint micro structural photographs showed comparable features both in parent metal and welded region. Thus the tensile characteristic study and microstructure evaluations proved that friction welded joints are good in both aspects compared to conventionally welded joints.

Pathogens occuring in the winter pea-maize-winter wheat rotation, their host specificity and the potential of compost in suppressing foot and root disease of peas

The overall aim of the work presented was to evaluate soil health management with a specific focus on soil borne diseases of peas. For that purpose field experiments were carried out from 2009 until 2013 to assess crop performance and pathogen occurrence in the rotation winter pea-maize-winter wheat and if the application of composts can improve system performance. The winter peas were left untreated or inoculated with Phoma medicaginis, in the presence or absence of yard waste compost at rate of 5 t dry matter ha-1. A second application of compost was made to the winter wheat. Fusarium ssp. were isolated and identified from the roots of all three crops and the Ascochyta complex pathogens on peas. Bioassays were conducted under controlled conditions to assess susceptibility of two peas to Fusarium avenaceum, F. solani, P. medicaginis and Didymella pinodes and of nine plant species to F. avenaceum. Also, effects of compost applications and temperature on pea diseases were assessed. Application of composts overall stabilized crop performance but it did not lead to significant yield increases nor did it affect pathogen composition and occurrence. Phoma medicaginis was dominating the pathogen complex on peas. F. graminearum, F. culmorum, F. proliferatum, Microdochium nivale, F. crookwellense, F. sambucinum, F. oxysporum, F. avenaceum and F. equiseti were frequently isolated species from maize and winter wheat with no obvious influence of the pre-crop on the Fusarium species composition. The spring pea Santana was considerably more susceptible to the pathogens tested than the winter pea EFB33 in both sterile sand and non-sterilized field soil. F. avenaceum was the most aggressive pathogen, followed by P. medicaginis, D. pinodes, and F. solani. Aggressiveness of all pathogens was greatly reduced in non-sterile field soil. F. avenaceum caused severe symptoms on roots of all nine plant species tested. Especially susceptible were Trifolium repens, T. subterraneum, Brassica juncea and Sinapis alba in addition to peas. Reduction of growing temperatures from 19/16°C day/night to 16/12°C and 13/10°C did not affect the efficacy of compost. It reduced plant growth and slightly increased disease on EFB33 whereas the highest disease severity on Santana was observed at the highest temperature, 19/16°C. Application of 20% v/v of compost reduced disease on peas due to all four pathogens depending on pea variety, pathogen and growing media used. Suppression was also achieved with lower application rate of 3.5% v/v. Tests with γ sterilized compost suggest that the suppression of disease caused by Fusarium spp. is biological in origin, whereas chemical and physical properties of compost are playing an additional role in the suppression of disease caused by D. pinodes and P. medicaginis.