Geochemistry, mineralogy, and chemical modeling of the acid crater lake of Kawah Ijen volcano, Indonesia

The Kawah Ijen volcano-with a record of phreatic eruptions-has its 1000 m wide crater filled with a lake that has existed for at least one century. At present, the lake waters are hot (T ≈ 37°C), strongly mineralized (TDS = 105 g/L) and extremely acidic (pH ≈ 0.4). By its volume, the Javanese lake is probably the largest accumulation in the world of such acidic waters. Mineralogy of the suspended solids within the lake waters suggests that concentrations of Si, Ca, Ti, and Ba are controlled by precipitation of silica, gypsum, anatase, and barite. Lake sediment is composed of chemical precipitates with composition similar to the suspended solids. Thermodynamic calculations predict that the lake waters have reached equilibrium with respect to α-cristobalite, barite, gypsum, anglesite, celestite, and amorphous silica, in agreement with the analytical observations. Significant concentrations of ferric iron suggest that the current lake waters are fairly oxidized. Sulfides are absent in the water column but are always present in the native S spherules that form porous aggregates which float on the lake. The presence of native S provides direct evidence of more reduced conditions at the lake floor where H2S is probably being injected into the lake. With progressive addition of H2S to the acid waters, native S, pyrite, and enargite are theoretically predicted to be saturated. Reactions between upward streaming H2S-bearing gases discharged by subaqueous fumaroles, and metals dissolved in the acidic waters could initiate precipitation of these sulfides. A model of direct absorption of hot magmatic gases into cool water accounts for the extreme acidity of the crater lake. Results show that strongly acidic, sulfate-rich solutions are formed under oxidizing conditions at high gas/water ratios. Reactions between the acidic fluids and the Ijen andesite were modeled to account for elevated cation concentrations in lake water. Current concentrations of conservative rockforming elements are produced by dissolution of approximately 60 g of andesite per kg of acid solution. Complete neutralization of the acid lake waters by reaction with the wallrock produces a theoretical alteration assemblage equivalent to that observed in volcano-hosted, acid-sulfate epithermal ore deposits. © 1994.

Critical stages of the brewing process for changes in antioxidant activity and levels of phenolic compounds in ale

Samples were taken at each stage of brewing (malt, milling, mashing, wort separation, hop addition, boiling, whirlpool, dilution, fermentation, warm rest, chill-lagering, beer filtration, carbonation and bottling, pasteurization, and storage). The level of antioxidant activity of unfractionated, low-molecular-mass (LMM) and high-molecular-mass (HMM) fractions was measured by the 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfortic acid) radical cation (ABTS(.+)) and ferric-reducing antioxidant power (FRAP) procedures. Polyphenol levels were assessed by HPLC. The LMM fraction ( 0.001) in catechin and ferulic acid levels. Increases in antioxidant activity levels were observed after mashing, boiling, fermentation, chill-lagering, and pasteurization, in line with previous studies on lager. Additionally, increases in the level of antioxidant activity occurred after wort separation and carbonation and bottling and were accompanied by increases in levels of most monitored polyphenols. Data from the ABTS(.-) and FRAP assays indicated that the compounds contributing to the levels of antioxidant activity responded differently in the two procedures. Levels of ferulic, vanillic, and chlorogenic acids and catechin accounted for 45-61% of the variation in antioxidant activity levels.

Biological influence on the morphology and micromorphology of selected Podzols (Spodosols) and Cambisols (Inceptisols) from the Eastern United States and Northeast Scotland

Biological activities greatly influence the formation of many soils, especially forest soils under cool humid climates. The objective of this study was to investigate the effects of vegetation and soil biota on the formation of selected soils. Field morphology, micromorphology, and carbon and organic matter analysis were determined on six Podzols (Spodosols) and two Cambisols (Inceptisols) from the eastern United States and north-east Scotland. Humification of plant material by soil fauna and fungi occurs in all organic horizons. Thick organic coatings are observed on soil peds and rock fragments from the E1 to the Bs horizon in a Haplic Podzol from Clingmans Dome Mt., TN. Thin sections reveal large accumulations of root material in different stages of decomposition in the spodic horizons of a Haplic Podzol from Whiteface Mt., NY. Organic carbon ranges from 5.4 to 8.5% in the spodic B horizons of the Whiteface Mt. Podzol. Earthworms and enchytraeids have a great effect on the structure of the surface and subsurface horizons in the Dystric Cambisols from Huntly and Clashindarroch Forests, Scotland and a Cambic Podzol from the Corrie Burn Basin, Scotland. Podzols from Speymouth Forest, Scotland (Gleyic Podzol), Cling-mans Dome Mt., and Whiteface Mt. have thick organic horizons. The Podzols from the Flatwoods in Georgia, the Pine Barrens in New Jersey, the Corrie Burn Basin, and the Cambisol from Huntly Forest have only A horizons at the surface. The Clashindarroch Forest soil has a very thin organic horizon. Warm and humid climates and sandy parent material are responsible for thick E horizons and lack of thick organic horizons in the Flatwoods (Carbic Podzol) and Pine Barrens (Ferric Podzol) soils. Earthworms and enchytraeids thrive in the Corrie Burn Basin and Huntly Forest soils due to the vegetation and the highly weathered basic parent material. The site at Clashindarroch once carried oak, and then birch forest, both of which produce a mild litter and also encourage earthworm and enchytraeids. This fauna is responsible for much mixing of the topsoil. The present conifer vegetation will eventually produce a deep litter and cause podzolization.

Immunological variants of the aerobactin-cloacin DF13 outer membrane protein receptor IutA among enteric bacteria

Mouse monoclonal antibodies (MAbs) were generated against a 76-kDa IutA receptor of pathogenic avian Escherichia coli 15972. Six of the eight IutA-specific MAbs isolated (AB1 to AB6) were shown to be directed toward membrane-exposed conformational epitopes, although they did not interfere with the uptake of ferric aerobactin and cloacin DF13 as assessed by competition experiments with purified ligands. The two remaining IutA MAbs (AB9 and AB10) recognized linear epitopes buried in the IutA molecule. The panel of IutA MAbs was used to characterize IutA variants occurring in strains of E. coli, Klebsiella pneumoniae, Enterobacter spp., and Shigella spp., resulting in the identification of four immunological groups of IutAs. MAb AB9 defined an epitope conserved in all IutA variants. In addition, the panel of IutA MAbs served to identify the presence of IutA in wild-type bacteria grown in the presence of diphenylamine to reduce the expression of O-specific polysaccharide.

Role of tol genes in cloacin DF13 susceptibility of Escherichia coli K-12 strains expressing the cloacin DF13-aerobactin receptor IutA

IutA is the outer membrane protein receptor for ferric aerobactin and the bacteriocin cloacin DF13. Although the same receptor is shared, ferric aerobactin transport across the outer membrane in Escherichia coli is TonB dependent, whereas cloacin DF13 transport is not. We have recently observed that tolQ is required for cloacin DF13 susceptibility (J.A. Thomas and M.A. Valvano, FEMS Microbiol. Lett. 91:107-112, 1992). In this study, we demonstrate that the genes tolQ, tolR, and tolA, but not tolB, tolC, and ompF, are required for the internalization of cloacin DF13 and they are not involved in the transport of ferric aerobactin.

tolQ is required for cloacin DF13 susceptibility in Escherichia coli expressing the aerobactin/cloacin DF13 receptor IutA

We investigated the role of the tolQ gene in the import of cloacin DF13 across the outer membrane of Escherichia coli strains expressing the IutA receptor. The IutA outer-membrane protein is the receptor for the siderophore ferric aerobactin and also binds cloacin DF13, a bacteriocin produced by strains of Enterobacter aerogenes. In this report we present evidence that tolQ is required for the internalization of cloacin DF13 upon binding to IutA but it is not involved in the transport of ferric aerobactin.

Polymorphism in the aerobactin-cloacin DF13 receptor genes from an enteroinvasive strain of Escherichia coli and pColV-K30 is associated only with a decrease in cloacin susceptibility

We have cloned chromosomal genes mediating the aerobactin iron transport system from the enteroinvasive strain Escherichia coli 978-77. The physical map of the region spanning the siderophore biosynthesis genes and the upstream portion of the receptor gene in strain 978-77-derived clones was identical to the corresponding regions in pColV-K30, while the downstream portion was different. Recombinant plasmids derived from strain 978-77 encoded a 76-kDa outer membrane protein, in contrast to the 74-kDa polypeptide encoded by similar clones derived from pColV-K30. No differences were found in the uptake of ferric aerobactin mediated by either the 76-kDa- or the 74-kDa-encoding plasmids. In contrast, cells containing the 76-kDa-encoding plasmids showed a 16-fold decrease in susceptibility to cloacin compared with cells harboring the 74-kDa-encoding plasmids. Two classes of chimeric aerobactin receptor genes were constructed by exchanging sequences corresponding to the downstream portion from the aerobactin receptor gene of both systems. The pColV-K30-978-77 chimeric gene encoded a 76-kDa outer membrane protein which mediated a low level of cloacin susceptibility, whereas the 978-77-pColV-K30 type encoded a protein of 74 kDa determining a level of cloacin susceptibility identical to that mediated by pColV-K30.

Molecular cloning, expression, and regulation in Escherichia coli K-12 of a chromosome-mediated aerobactin iron transport system from a human invasive isolate of E. coli K1

We have cloned chromosomal genes determining the aerobactin iron transport system from the Escherichia coli K1 strain VW187. Mapping and hybridization experiments showed that the VW187 aerobactin region was identical to that of the plasmid ColV-K30. However, in the E. coli K-12 background, the biosynthesis of both siderophore and ferric aerobactin receptor encoded by the VW187-derived recombinant plasmids was not repressed by iron to the same extent found when a recombinant plasmid derived from pColV-K30 was used. RNA-DNA dot-blot hybridization experiments demonstrated that the aerobactin-specific mRNA synthesized by the VW187-derived clones was not iron regulated in E. coli K-12. In contrast, the synthesis of aerobactin and its receptor in strain VW187 was completely repressed by iron regardless of whether the recombinant plasmids originated from VW187 or pColV-K30. Similar results were obtained with gene fusions in which a promoterless lac operon was placed under the control of aerobactin promoter regions of either chromosome- or plasmid-mediated aerobactin systems. DNA sequencing of the chromosomal aerobactin promoter region showed changes in bases located immediately upstream to the -35 region compared with the corresponding region in pColV-K30, which is known to be part of the binding site for the Fur repressor protein.

Flanking and internal regions of chromosomal genes mediating aerobactin iron uptake systems in enteroinvasive Escherichia coli and Shigella flexneri

We have investigated the presence of the aerobactin system and the location of the aerobactin genes in enteroinvasive strains of Escherichia coli. Also, we cloned the aerobactin region and its flanking sequences from the chromosome of a strain of Shigella flexneri and compared the molecular organization of the aerobactin genes in the two genera. Of the 11 enteroinvasive E. coli strains studied, 5 possessed the aerobactin genes, which were located on the chromosome in each case. These strains produced and utilized aerobactin and also were susceptible to the bacteriocin cloacin-DF13. Restriction endonuclease mapping and hybridization experiments showed that the regions corresponding to the aerobactin-specific sequences were very similar in both enteroinvasive E. coli and S. flexneri. However, differences were found in the region corresponding to the aerobactin receptor gene. The regions flanking the aerobactin system in enteroinvasive E. coli and S. flexneri exhibited some similarities but were different from those in pColV-K30. Under iron-limiting conditions, aerobactin-producing enteroinvasive E. coli and S. flexneri synthesized outer-membrane proteins of 76 and 77 kDa, respectively, which cross-reacted immunologically with rabbit antiserum raised against the 74 kDa pColV-K30-encoded ferric aerobactin receptor.

Clarification of rubber mill wastewater by a plant based biopolymer- comparison with common inorganic coagulants

Background: In this study, the efficiency of Guar gum as a biopolymer has been compared with two other widely used inorganic coagulants, ferric chloride (FeCl3) and aluminum chloride (AlCl3), for the treatment of effluent collected from the rubber-washing tanks of a rubber concentrate factory. Settling velocity distribution curves were plotted to demonstrate the flocculating effect of FeCl3, AlCl3 and Guar gum. FeCl3 and AlCl3 displayed better turbidity removal than Guar gum at all settling velocities.

Result: FeCl3, AlCl3 and Guar gum removed 92.8%, 88.2% and 88.1% turbidity, respectively, of raw wastewater at a settling velocity of 0.1 cm min-1, respectively. Scanning electron microscopic (SEM) study conducted on the flocs revealed that Guar gum and FeCl3produced strong intercoiled honeycomb patterned floc structure capable of entrapping suspended particulate matter. Statistical experimental design Response Surface Methodology (RSM) was used to design all experiments, where the type and dosage of flocculant, pH and mixing speed were taken as control factors and, an optimum operational setting was proposed.

Conclusion: Due to biodegradability issues, the use of Guar gum as a flocculating agent for wastewater treatment in industry is highly recommended.

Phosphorus Adsorption onto an Industrial Acidified Laterite By‒Product: Equilibrium and Thermodynamic Investigation

The present research investigates the uptake of phosphate ions from aqueous solutions using acidified laterite (ALS), a by-product from the production of ferric aluminium sulfate using laterite. Phosphate adsorption experiments were performed in batch systems to determine the amount of phosphate adsorbed as a function of solution pH, adsorbent dosage and thermodynamic parameters per fixed P concentration. Kinetic studies were also carried out to study the effect of adsorbent particle sizes. The maximum removal capacity of ALS observed at pH 5 was 3.68 mg P g^-1. It was found that as the adsorbent dosage increases, the equilibrium pH decreases, so an adsorbent dosage of 1.0 g L^-1 of ALS was selected. Adsorption capacity (q_m) calculated from the Langmuir isotherm was found to be 2.73 mg g^-1. Kinetic experimental data were mathematically well described using the pseudo first-order model over the full range of the adsorbent particle size. The adsorption reactions were endothermic, and the process of adsorption was favoured at high temperature; the ΔG and ΔH values implied that the main adsorption mechanism of P onto ALS is physisorption. The desorption studies indicated the need to consider a NaOH 0.1M solution as an optimal solution for practical regeneration applications.

Synthesis and biological activities of polyphenolic hybrids - evaluation of anti-cancer, anti-inflammatory and antioxidant activities

Os compostos polifenólicos constituem uma classe de metabolitos secundários de plantas, mas existe também uma enorme quantidade de derivados sintéticos ou semi-sintéticos contendo múltiplas unidades fenólicas. Estes compostos apresentam importantes características biológicas, que dependem das suas estruturas básicas. Certos derivados desta família de compostos, tais como flavonoides, cromonas e cumarinas contribuem para os benefícios da dieta humana, e partilham o núcleo de benzopiran-(2 e 4)-ona ou benzofuran-3-ona. A presente dissertação inclui uma introdução geral e três capítulos que descrevem as novas rotas sintéticas estabelecidas para a preparação de novos híbridos de diversos compostos polifenólicos, assim como a sua elucidação estrutural e termina com a presentação dos resultados da avaliação biológica desses mesmos compostos. No segundo capítulo discute-se a preparação de híbridos de pirimidina- e imidazolidina-polifenóis, especialmente a síntese diastereoseletiva de novos híbridos benzofuran-3-ona-hidantoína e derivados de uracilo. A rota sintética envolve a ação de carbodiimidas sobre os ácidos cromona-(2- e 3)-carboxílicos num só passo ou em dois passos sequenciais, catalisada por uma base orgânica ou inorgânica. O terceiro capítulo descreve reações do tipo adições conjugadas 1,4 - hetero-ciclisações em cascata de compostos 1,3-dicarbonílicos em ácido cromona-3-carboxílico catalisadas por uma base orgânica, que originaram novas cromonas, cromanonas e flavonas polissubstituídas. As bispiranonas [bispiran-2 e 4)-onas] foram elaboradas numa reacção de acoplamento da 4-hidroxicumarina ou da lactona do ácido triacético com o ácido cromona-3-carboxílico ou precursores formil-funcionalizados (ω-formil-2’-hydroxy acetofenonas e cromona-3-carbaldeídos) utilizando organocatálise básica. Finalmente, alargou-se o estudo das adições conjugadas 1,4 para uma variedade de 4-hidroxipiran-2-onas e cetonas α,β-insaturadas para originar novos análogos de warfarina. Obteve-se uma variedade de estruturas complexas por hibridação das unidades de 4-hidroxicumarina ou da lactona do ácido triacético com os novos derivados de cromonas polissubstituídas. Todos as reações foram executadas em condições suaves e ambientalmente favoráveis, utilizando a 4-pirrolidinopiridina como organocatalisador básico. As estruturas dos novos híbridos polifenólicos foram caracterizados por técnicas espectroscópicas de alta resolução, incluindo espectroscopia de ressonância magnética nuclear (1D e 2D) e por difractometria de raios-X, que nos permitiram resolver o complexidade estrutural dos compostos sintetizados. O quarto capítulo apresenta os resultados da avaliação biológica obtidos com os híbridos polifenólicos sintetizados neste trabalho, mostrando a possibilidade de seu envolvimento na terapia do cancro. A maioria dos compostos foram avaliados quanto ao seu efeito sobre a citotoxicidade e proliferação de células leucémicas e ao seu envolvimento na regulação de via pró-inflamatória NF-kB, na qual, os híbridos de biscumarinas exibiram actividades elevadas (IC50 = 6-19 μM para inibição de NF-kB depois de 8 horas de incubação e IC50 = 15-39 μM para efeitos citotóxicos em células cancerosas, após 24 horas de incubação). Uma inibição moderada das enzimas HDAC e Cdc25 foi induzida pelos derivados de benzofuran-3-ona-hidantoína. Catorze dos novos derivados polifenólicos polissubstituídos, tendo como estrutura básica a benzopiran-4-ona, foram avaliados pela sua actividade quimiopreventiva do cancro mediada pela indução de sinalização citoprotectora Nrf2 (fator 2 relacionado com o fator nuclear da proteína E2) e capacidade para inibir a proliferação das células de cancro da mama. Os derivados da classe das cromanonas foram identificados como os indutores mais potentes da actividade Nrf2. As concentrações necessárias para aumentar a actividade de luciferase em 10 vezes (C10) foram de 2,8-21,3 μM. Todos os novos híbridos polifenólicos que apresentam atividade citotóxica e anti-proliferativa não afectam o crescimento de células saudáveis periféricas do sangue (PBMC) (IC50 > 50 μM), indicando a sua seletividade para as células cancerosas e sugerindo que alguns deles são estruturalmente interessantes para posteriores análises. A avaliação da atividade antioxidante utilizando os testes do radical livre DPPH e o poder redutor do ião férrico FRAP foram realizados em algumas estruturas híbridas polifenólicas.

Caracterização fisiológica e nutritiva da clorose férrica em citrinos

Tese dout., Ciências Agrárias, Produção Vegetal, Unidade de Ciências e Tecnologias Agrárias, Universidade do Algarve, 2000

Antioxidant properties and phenol content of Portulaca oleracea L. leaf, stems and flowers infusions: health benefits

Dissertação de mest., Ciências Biomédicas, Departamento de Ciências Biomédicas e Medicina, Univ. do Algarve, 2011

Antioxidant and phenolic compounds in sweet potato peels and leaves: food applications and health benefits

Tese de doutoramento, Ciências Biotecnológicas (Biotecnologia Alimentar), Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014