CFD-modeling of insulation debris transport phenomena in water flow

The investigation of insulation debris generation, transport and sedimentation becomes important with regard to reactor safety research for PWR and BWR, when considering the long-term behavior of emergency core cooling systems during all types of loss of coolant accidents (LOCA). The insulation debris released near the break during a LOCA incident consists of a mixture of disparate particle population that varies with size, shape, consistency and other properties. Some fractions of the released insulation debris can be transported into the reactor sump, where it may perturb/impinge on the emergency core cooling systems. Open questions of generic interest are the sedimentation of the insulation debris in a water pool, its possible re-suspension and transport in the sump water flow and the particle load on strainers and corresponding pressure drop. A joint research project on such questions is being performed in cooperation between the University of Applied Sciences Zittau/Görlitz and the Forschungszentrum Dresden-Rossendorf. The project deals with the experimental investigation of particle transport phenomena in coolant flow and the development of CFD models for its description. While the experiments are performed at the University at Zittau/Görlitz, the theoretical modeling efforts are concentrated at Forschungszentrum Dresden-Rossendorf. In the current paper the basic concepts for CFD-modeling are described and feasibility studies including the conceptual design of the experiments are presented. © 2009 Elsevier B.V. All rights reserved.

CFD-modeling and Experiments of insulation debris transport phenomena in water flow

The investigation of insulation debris generation, transport and sedimentation becomes important with regard to reactor safety research for PWR and BWR, when considering the long-term behavior of emergency core cooling systems during all types of loss of coolant accidents (LOCA). The insulation debris released near the break during a LOCA incident consists of a mixture of disparate particle population that varies with size, shape, consistency and other properties. Some fractions of the released insulation debris can be transported into the reactor sump, where it may perturb/impinge on the emergency core cooling systems. Open questions of generic interest are the sedimentation of the insulation debris in a water pool, its possible re-suspension and transport in the sump water flow and the particle load on strainers and corresponding pressure drop. A joint research project on such questions is being performed in cooperation between the University of Applied Sciences Zittau/Görlitz and the Forschungszentrum Dresden-Rossendorf. The project deals with the experimental investigation of particle transport phenomena in coolant flow and the development of CFD models for its description. While the experiments are performed at the University at Zittau/Görlitz, the theoretical modeling efforts are concentrated at Forschungszentrum Dresden-Rossendorf. In the current paper the basic concepts for CFD modeling are described and feasibility studies including the conceptual design of the experiments are presented.

Numerical and experimental investigations for insulation particle transport phenomena in water flow

The investigation of insulation debris generation, transport and sedimentation becomes more important with regard to reactor safety research for pressurized and boiling water reactors, when considering the long-term behaviour of emergency core coolant systems during all types of loss of coolant accidents (LOCA). The insulation debris released near the break during a LOCA incident consists of a mixture of a disparate particle population that varies with size, shape, consistency and other properties. Some fractions of the released insulation debris can be transported into the reactor sump, where it may perturb or impinge on the emergency core cooling systems. Open questions of generic interest are for example the particle load on strainers and corresponding pressure-drop, the sedimentation of the insulation debris in a water pool, its possible re-suspension and transport in the sump water flow. A joint research project on such questions is being performed in cooperation with the University of Applied Science Zittau/Görlitz and the Forschungszentrum Dresden-Rossendorf. The project deals with the experimental investigation and the development of computational fluid dynamic (CFD) models for the description of particle transport phenomena in coolant flow. While the experiments are performed at the University Zittau/Görlitz, the theoretical work is concentrated at Forschungszentrum Dresden-Rossendorf. In the present paper, the basic concepts for computational fluid dynamic (CFD) modelling are described and experimental results are presented. Further experiments are designed and feasibility studies were performed.

CFD-modelling of insulation debris transport phenomena in water flow

The investigation of insulation debris generation, transport and sedimentation becomes important with regard to reactor safety research for PWR and BWR, when considering the long-term behavior of emergency core cooling systems during all types of loss of coolant accidents (LOCA). The insulation debris released near the break during a LOCA incident consists of a mixture of disparate particle population that varies with size, shape, consistency and other properties. Some fractions of the released insulation debris can be transported into the reactor sump, where it may perturb/impinge on the emergency core cooling systems. Open questions of generic interest are the sedimentation of the insulation debris in a water pool, its possible re-suspension and transport in the sump water flow and the particle load on strainers and corresponding pressure drop. A joint research project on such questions is being performed in cooperation between the University of Applied Sciences Zittau/Görlitz and the Forschungszentrum Dresden-Rossendorf. The project deals with the experimental investigation of particle transport phenomena in coolant flow and the development of CFD models for its description. While the experiments are performed at the University at Zittau/Görlitz, the theoretical modeling efforts are concentrated at Forschungszentrum Dresden-Rossendorf. Whereas the paper Alt et al. is focused on the experiments in the present paper the basic concepts for CFD modeling are described and feasibility studies including the conceptual design of the experiments are presented.

Statistical analysis and optimal classification of blood cell populations using Gaussian distributions

This dissertation develops a new figure of merit to measure the similarity (or dissimilarity) of Gaussian distributions through a novel concept that relates the Fisher distance to the percentage of data overlap. The derivations are expanded to provide a generalized mathematical platform for determining an optimal separating boundary of Gaussian distributions in multiple dimensions. Real-world data used for implementation and in carrying out feasibility studies were provided by Beckman-Coulter. It is noted that although the data used is flow cytometric in nature, the mathematics are general in their derivation to include other types of data as long as their statistical behavior approximate Gaussian distributions. ^ Because this new figure of merit is heavily based on the statistical nature of the data, a new filtering technique is introduced to accommodate for the accumulation process involved with histogram data. When data is accumulated into a frequency histogram, the data is inherently smoothed in a linear fashion, since an averaging effect is taking place as the histogram is generated. This new filtering scheme addresses data that is accumulated in the uneven resolution of the channels of the frequency histogram. ^ The qualitative interpretation of flow cytometric data is currently a time consuming and imprecise method for evaluating histogram data. This method offers a broader spectrum of capabilities in the analysis of histograms, since the figure of merit derived in this dissertation integrates within its mathematics both a measure of similarity and the percentage of overlap between the distributions under analysis. ^

International tourism : can it contribute to Nigeria's economic growth as other industrial sectors?

The growth of international tourism and the attendant economic benefits to the world nations, has been phenominal since the end of the second world war. It is considered that the industry's upsurge will continue even in the phase of various constraints exemplified in high fuel cost, constant increase in fares and the threatening world-wide recessions. Developed as well as developing countries have gained substantially from the industry. A recent development shows increasing tourist traffic towards developing countries, while developed countries still hold their fort in stable growth of tourist receipts. The strategic beneficial effects of international tourist industry are often quantified in terms of foreign exchange earnings, employments offered, and the Real Estate super-structures; but in general,the industry has innumerable direct and indirect benefits to any nation engaging in the trade. The objective of this thesis is to demonstrate by comparative analysis and proven parameters that the international tourist industry which is given low priority in development in Nigeria, can equally contribute to the nation's economic growth as other industrial sectors which receive high priority and patronage in development. The data for this paper are gathered from primary sources which are i) responses by the Federal and State Governments' tourism-related offices; ii) government publications e.a. the Third National Development Plan of Federal Republic of Nigeria; and iii) Books and collections. The secondary sources include reports,periodicals and hospitality industry publications. To formally establish the international tourist industry in Nigeria, all the governments (Federal, State and Local) and the private sector in the country, should commence the development of the industry with research and feasibility studies, to be followed by proper planning at all levels and based on the result of the research and feasibility studies.

Methods and processes for development of a CONSORT extension for reporting pilot randomized controlled trials

Peer reviewed

A theory-informed approach to developing visually mediated interventions to change behaviour using an asthma and physical activity intervention exemplar

Funding for this study was received from the Chief Scientist Office for Scotland. We would like to thank Asthma UK and Asthma UK Scotland for facilitating the advertisement of the study pilot and consultative user group. Thanks to Dr Mark Grindle for his helpful discussions concerning narrative. Thanks also to Mr Mark Haldane who designed the characters, backgrounds, and user interface used within the 3D computer animation. Particular thanks to the participants of the consultative user group for their enthusiasm, comments, and suggestions at all stages of the intervention design.

Establishing an EGFR mutation screening service for non-small cell lung cancer - sample quality criteria and candidate histological predictors.

INTRODUCTION: EGFR screening requires good quality tissue, sensitivity and turn-around time (TAT). We report our experience of routine screening, describing sample type, TAT, specimen quality (cellularity and DNA yield), histopathological description, mutation result and clinical outcome. METHODS: Non-small cell lung cancer (NSCLC) sections were screened for EGFR mutations (M+) in exons 18-21. Clinical, pathological and screening outcome data were collected for year 1 of testing. Screening outcome alone was collected for year 2. RESULTS: In year 1, 152 samples were tested, most (72%) were diagnostic. TAT was 4.9 days (95%confidence interval (CI)=4.5-5.5). EGFR-M+ prevalence was 11% and higher (20%) among never-smoking women with adenocarcinomas (ADCs), but 30% of mutations occurred in current/ex-smoking men. EGFR-M+ tumours were non-mucinous ADCs and 100% thyroid transcription factor (TTF1+). No mutations were detected in poorly differentiated NSCLC-not otherwise specified (NOS). There was a trend for improved overall survival (OS) among EGFR-M+ versus EGFR-M- patients (median OS=78 versus 17 months). In year 1, test failure rate was 19%, and associated with scant cellularity and low DNA concentrations. However 75% of samples with poor cellularity but representative of tumour were informative and mutation prevalence was 9%. In year 2, 755 samples were tested; mutation prevalence was 13% and test failure only 5.4%. Although samples with low DNA concentration (2.2 ng/μL), the mutation rate was 9.2%. CONCLUSION: Routine epidermal growth factor receptor (EGFR) screening using diagnostic samples is fast and feasible even on samples with poor cellularity and DNA content. Mutations tend to occur in better-differentiated non-mucinous TTF1+ ADCs. Whether these histological criteria may be useful to select patients for EGFR testing merits further investigation.

Design and implementation of a non-destructive defect detection technique based on UWB-SAR imaging

In the last twenty years aerospace and automotive industries started working widely with composite materials, which are not easy to test using classic Non-Destructive Inspection (NDI) techniques. Pairwise, the development of safety regulations sets higher and higher standards for the qualification and certification of those materials. In this thesis a new concept of a Non-Destructive defect detection technique is proposed, based on Ultrawide-Band (UWB) Synthetic Aperture Radar (SAR) imaging. Similar SAR methods are yet applied either in minefield [22] and head stroke [14] detection. Moreover feasibility studies have already demonstrated the validity of defect detection by means of UWB radars [12, 13]. The system was designed using a cheap commercial off-the-shelf radar device by Novelda and several tests of the developed system have been performed both on metallic specimen (aluminum plate) and on composite coupon (carbon fiber). The obtained results confirm the feasibility of the method and highlight the good performance of the developed system considered the radar resolution. In particular, the system is capable of discerning healthy coupons from damaged ones, and correctly reconstruct the reflectivity image of the tested defects, namely a 8 x 8 mm square bulge and a 5 mm drilled holes on metal specimen and a 5 mm drilled hole on composite coupon.

Improving Patients’ Experience and Outcome of Total Joint Replacement: the RESTORE Programme

BACKGROUND: Total hip replacements (THRs) and total knee replacements (TKRs) are common elective procedures. In the REsearch STudies into the ORthopaedic Experience (RESTORE) programme, we explored the care and experiences of patients with osteoarthritis after being listed for THR and TKR up to the time when an optimal outcome should be expected. OBJECTIVE: To undertake a programme of research studies to work towards improving patient outcomes after THR and TKR. METHODS: We used methodologies appropriate to research questions: systematic reviews, qualitative studies, randomised controlled trials (RCTs), feasibility studies, cohort studies and a survey. Research was supported by patient and public involvement. RESULTS: Systematic review of longitudinal studies showed that moderate to severe long-term pain affects about 7–23% of patients after THR and 10–34% after TKR. In our cohort study, 10% of patients with hip replacement and 30% with knee replacement showed no clinically or statistically significant functional improvement. In our review of pain assessment few research studies used measures to capture the incidence, character and impact of long-term pain. Qualitative studies highlighted the importance of support by health and social professionals for patients at different stages of the joint replacement pathway. Our review of longitudinal studies suggested that patients with poorer psychological health, physical function or pain before surgery had poorer long-term outcomes and may benefit from pre-surgical interventions. However, uptake of a pre-operative pain management intervention was low. Although evidence relating to patient outcomes was limited, comorbidities are common and may lead to an increased risk of adverse events, suggesting the possible value of optimising pre-operative management. The evidence base on clinical effectiveness of pre-surgical interventions, occupational therapy and physiotherapy-based rehabilitation relied on small RCTs but suggested short-term benefit. Our feasibility studies showed that definitive trials of occupational therapy before surgery and post-discharge group-based physiotherapy exercise are feasible and acceptable to patients. Randomised trial results and systematic review suggest that patients with THR should receive local anaesthetic infiltration for the management of long-term pain, but in patients receiving TKR it may not provide additional benefit to femoral nerve block. From a NHS and Personal Social Services perspective, local anaesthetic infiltration was a cost-effective treatment in primary THR. In qualitative interviews, patients and health-care professionals recognised the importance of participating in the RCTs. To support future interventions and their evaluation, we conducted a study comparing outcome measures and analysed the RCTs as cohort studies. Analyses highlighted the importance of different methods in treating and assessing hip and knee osteoarthritis. There was an inverse association between radiographic severity of osteoarthritis and pain and function in patients waiting for TKR but no association in THR. Different pain characteristics predicted long-term pain in THR and TKR. Outcomes after joint replacement should be assessed with a patient-reported outcome and a functional test. CONCLUSIONS: The RESTORE programme provides important information to guide the development of interventions to improve long-term outcomes for patients with osteoarthritis receiving THR and TKR. Issues relating to their evaluation and the assessment of patient outcomes are highlighted. Potential interventions at key times in the patient pathway were identified and deserve further study, ultimately in the context of a complex intervention.

Plan de Negocio EfectiWeb

Nuestra idea se desarrolla en Internet, donde personas están buscando bienes y servicios para suplir sus necesidades y problemas -- Lo que buscamos es identificar que problemas existen para nichos de mercado específicos a los cuales se les pueda servir por medio de páginas web -- Para cada nicho de mercado pueden existir problemas que no han sido servidos o que están descuidados por otras páginas web dentro de cada nicho que queramos servir -- De acuerdo a nuestra investigación de distintos nichos, buscaremos oportunidades en mercados donde no hayan sido entregadas soluciones por medio de Internet (no hay contenido al respecto o es pobre o encontramos un micro nicho sin atender) -- Nuestra estrategia de éxito es la siguiente: 1 -- Buscar nichos de mercado en Internet cuyas necesidades no hayan sido suplidas por medio de páginas web y donde el contenido que exista no sea muy bueno o se pueden hacer mejoras -- 2 -- Crear una página web con el contenido clave para suplir estas necesidades -- 3 -- Encontrar productos o servicios relacionados y dar una recomendación de compra (por medio de una comparación entre productos, análisis de sus beneficios, testimonios)

Produção de biomassa e exportação de nutrientes de Eucalyptus grandis e E. urophylla

Scientific research in forest production technology area search techniques that increase production per unit area, with high economic viability and reducing environmental impacts. When dealing with forest plantations, studies are needed in the production of biomass and its nutrient content, and these are data parameters for planning the environmental implications of different intensities of forest harvesting. Given the above, this study aimed to elucidate the production and export of biomass and nutrients for two species of the genus Eucalyptus (E. grandis and E. urophylla) grown in the southwestern region of Parana. For this, it was evaluated: the stock of biomass and nutrients in eucalyptus (wood, bark, branches and leaves) at 60 months of age; the export rate of nutrients; the calorific value and economic viability. The biomass and the largest eucalyptus nutrient stocks are predominantly allocated to the stem (wood + bark). The components of biomass showed different chemical compositions, generally being higher in the leaves and bark and lower in wood and branches components. As for the calorific value, the leaves had its calorific value statistically superior than the other fractions, followed by branches, wood and bark. The organic carbon content (C.O.) is directly connected to the calorific value, and the calorific value increases as its content increase. The wood had the highest nutrient use efficiency values, something highly desirable and of great interest to forestry. The leaves showed smaller nutrient utilization efficiency values, with the exception of Ca and Mg that were smaller in the bark, indicating the importance of maintaining these components in the soil after harvest. The wood fraction presents the biomass lower cost when considering the replacement of nutrients exported by its biomass. On the other hand, the leaf fraction showed NPK higher cost of replacement.