Identification and Semiactive Control of Smart Structures Equipped with Magnetorheological Actuators

This paper deals with the problem of identification and semiactive control of smart structures subject to unknown external disturbances such as earthquake, wind, etc. The experimental setup used is a 6-story test structure equipped with shear-mode semiactive magnetorheological actuators being installed in WUSCEEL. The experimental results obtained have verified the effectiveness of the proposed control algorithms

Semiactive backstepping control for vibration attenuation in structures equipped with magnetorheological actuatorscat

This paper deals with the problem of semiactive vibration control of civil engineering structures subject to unknown external disturbances (for example, earthquakes, winds, etc.). Two kinds of semiactive controllers are proposed based on the backstepping control technique. The experimental setup used is a 6-story test structure equipped with shear-mode semiactive magnetorheological dampers being installed in the Washington University Structural Control and Earthquake Engineering Laboratory (WUSCEEL). The experimental results obtained have verified the effectiveness of the proposed control algorithms

Relación entre el desarrollo de sistemas de control de gestión y los recursos y capacidades caso : Teleperformance Colombia

Siguiendo un marco teórico integrado por varios autores entorno a los sistemas de control de gestión a lo largo de varias décadas, este trabajo pretende estudiar y contrastar la relación entre el desarrollo de dichos sistemas y los recursos y capacidades. Para tal fin, se desarrolló un estudio de caso en Teleperformance Colombia (TC), una empresa dedicada a prestación de servicio de tercerización de procesos o business process outsourcing. En el estudio se establecieron dos variables para evaluar el desarrollo de sistema de control de gestión: el diseño y el uso. A su vez, para cada uno de ellos, se definieron los indicadores y preguntas que permitieran realizar la observación y posterior análisis. De igual manera, se seleccionaron los recursos y capacidades más importantes para el desarrollo del negocio: innovación, aprendizaje organizacional y capital humano. Sobre estos se validó la existencia de relación con el SCG implementado en TC. La información obtenida fue analizada y contrastada a través de pruebas estadísticas ampliamente utilizadas en este tipo de estudios en las ciencias sociales. Finalmente, se analizaron seis posibles relaciones de las cuales, solamente se ratificó el relacionamiento positivo entre uso de sistema de control gestión y el recurso y capacidad capital humano. El resto de relacionamientos, refutaron los planteamientos teóricos que establecían cierta influencia de los sistemas de control de gestión sobre recursos y capacidades de innovación y aprendizaje organizacional.

La Organización de Cooperación de Shanghái (OCS): ¿una alianza estratégica Sino-Rusa para el control de Asia Central? (2001-2014)

La presente monografía pretende analizar en qué medida el co-liderazgo sino-ruso de la Organización de Cooperación de Shanghái puede condicionar la hegemonía estadounidense en Asia Central. Esta investigación defiende que los objetivos del co-liderazgo sino-ruso de la OCS - garantizar un orden multipolar del Sistema Internacional; obtener el acceso, control y explotación de los recursos (naturales, minerales e hídricos); disminuir la influencia política y militar de Estados Unidos en dicho pivote geopolítico - evidencian una contraposición al código geopolítico estadounidense en Asia Central, lo cual genera un limitante a su proyecto de hegemonía en la región. Para sustentar lo anterior se utilizan categorías analíticas propias de la Geopolítica de autores como Zbigniew Brzezinski, Saul Cohen y Peter Taylor, las cuales se contrastan con las estrategias de Rusia, China y Estados Unidos en Asia Central.

Operation and control of SBR processes for enhanced biological nutrient removal from wastewater

In the last decades, the awareness of environmental issues has increased in society considerably. There is an increasing need to improve the effluent quality of domestic wastewater treatment processes. This thesis describes the application of the Sequencing Batch Reactor (SBR) technology for Biological Nutrient Removal (BNR) from the wastewater. In particular, the work presented evolves from the nitrogen removal to the biological nutrient removal (i.e. nitrogen plus phosphorous removal) with special attention to the operational strategy design, the identification of possible reactor cycle controls or the influent composition related to the process efficiency. In such sense, also the use of ethanol as an external carbon (when low influent Carbon:Phosphorus (C:P) or Carbon:Nitrogen (C:N) ratios are presented) are studied as an alternative to maintain the BNR efficiency.

Robust Control of Systems Subjected to Uncertain Disturbances and Actuator Dynamics

Esta tesis está enfocada al diseño y validación de controladores robustos que pueden reducir de una manera efectiva las vibraciones structurales producidas por perturbaciones externas tales como terremotos, fuertes vientos o cargas pesadas. Los controladores están diseñados basados en teorías de control tradicionalamente usadas en esta area: Teoría de estabilidad de Lyapunov, control en modo deslizante y control clipped-optimal, una técnica reciente mente introducida : Control Backstepping y una que no había sido usada antes: Quantitative Feedback Theory. La principal contribución al usar las anteriores técnicas, es la solución de problemas de control estructural abiertos tales como dinámicas de actuador, perturbaciones desconocidas, parametros inciertos y acoplamientos dinámicos. Se utilizan estructuras típicas para validar numéricamente los controladores propuestos. Especificamente las estructuras son un edificio de base aislada, una plataforma estructural puente-camión y un puente de 2 tramos, cuya configuración de control es tal que uno o mas problemas abiertos están presentes. Se utilizan tres prototipos experimentales para implementar los controladores robustos propuestos, con el fin de validar experimentalmente su efectividad y viabilidad. El principal resultado obtenido con la presente tesis es el diseño e implementación de controladores estructurales robustos que resultan efectivos para resolver problemas abiertos en control estructural tales como dinámicas de actuador, parámetros inciertos, acoplamientos dinámicos, limitación de medidas y perturbaciones desconocidas.

Real-Time software control of neural stimulation in a closed loop Animat system

A recent area for investigation into the development of adaptable robot control is the use of living neuronal networks to control a mobile robot. The so-called Animat paradigm comprises a neuronal network (the ‘brain’) connected to an external embodiment (in this case a mobile robot), facilitating potentially robust, adaptable robot control and increased understanding of neural processes. Sensory input from the robot is provided to the neuronal network via stimulation on a number of electrodes embedded in a specialist Petri dish (Multi Electrode Array (MEA)); accurate control of this stimulation is vital. We present software tools allowing precise, near real-time control of electrical stimulation on MEAs, with fast switching between electrodes and the application of custom stimulus waveforms. These Linux-based tools are compatible with the widely used MEABench data acquisition system. Benefits include rapid stimulus modulation in response to neuronal activity (closed loop) and batch processing of stimulation protocols.

Puroindoline-b mutations control the lipid binding interactions in mixed puroindoline-a: puroindoline-b systems

The interactions have been investigated of puroindoline-a (Pin-a) and mixed protein systems of Pin-a and wild-type puroindoline-b (Pin-b+) or puroindoline-b mutants (G46S mutation (Pin bH) or W44R mutation (Pin-bS)) with condensed phase monolayers of an anionic phospholipid (L-α-dipalmitoylphosphatidyl-dl-glycerol (DPPG)) at the air/water interface. The interactions of the mixed systems were studied at three different concentration ratios of Pin-a:Pin-b, namely 3:1, 1:1 and 1:3 in order to establish any synergism in relation to lipid binding properties. Surface pressure measurements revealed that Pin-a interaction with DPPG monolayers led to an equilibrium surface pressure increase of 8.7 ± 0.6 mN m-1. This was less than was measured for Pin-a:Pin-b+ (9.6 to 13.4 mN m-1), but was significantly more than was measured for Pin-a:Pin-bH (4.0 to 6.2 mN m-1) or Pin-a:Pin-bS (3.8 to 6.3 mN m-1) over the complete range of concentration ratio. Consequently, surface pressure increases were shown to correlate to endosperm hardness phenotype, with puroindolines present in hard-textured wheat varieties yielding lower equilibrium surface pressure changes. Integrated amide I peak areas from corresponding external reflectance Fourier-transform infrared (ER-FTIR) spectra, used to indicate levels of protein adsorption to the lipid monolayers, showed that differences in adsorbed amount were less significant. The data therefore suggest that Pin-b mutants having single residue substitutions within their tryptophan-rich loop that are expressed in some hard-textured wheat varieties influence the degree of penetration of Pin-a and Pin-b into anionic phospholipid films. These findings highlight the key role of the tryptophan-rich loop in puroindoline-lipid interactions.

Kinetic models as a route to control acrylamide formation in food

Reports that heat processing of foods induces the formation of acrylamide heightened interest in the chemistry, biochemistry, and safety of this compound. Acrylamide-induced neurotoxicity, reproductive toxicity, genotoxicity, and carcinogenicity are potential human health risks based on animal studies. Because exposure of humans to acrylamide can come from both external sources and the diet, there exists a need to develop a better understanding of its formation and distribution in food and its role in human health. To contribute to this effort, experts from eight countries have presented data on the chemistry, analysis, metabolism, pharmacology, and toxicology of acrylamide. Specifically covered are the following aspects: exposure from the environment and the diet; biomarkers of exposure; risk assessment; epidemiology; mechanism of formation in food; biological alkylation of amino acids, peptides, proteins, and DNA by acrylamide and its epoxide metabolite glycidamide; neurotoxicity, reproductive toxicity, and carcinogenicity; protection against adverse effects; and possible approaches to reducing levels in food. Cross-fertilization of ideas among several disciplines in which an interest in acrylamide has developed, including food science, pharmacology, toxicology, and medicine, will provide a better understanding of the chemistry and biology of acrylamide in food, and can lead to the development of food processes to decrease the acrylamide content of the diet.

Finding the point on Bezier Curves with the normal vector passing an external point

Two algorithms for finding the point on non-rational/rational Bezier curves of which the normal vector passes through a given external point are presented. The algorithms are based on Bezier curves generation algorithms of de Casteljau's algorithm for non-rational Bezier curve or Farin's recursion for rational Bezier curve, respectively. Orthogonal projections from the external point are used to guide the directional search used in the proposed iterative algorithms. Using Lyapunov's method, it is shown that each algorithm is able to converge to a local minimum for each case of non-rational/rational Bezier curves. It is also shown that on convergence the distance between the point on curves to the external point reaches a local minimum for both approaches. Illustrative examples are included to demonstrate the effectiveness of the proposed approaches.

Single tap identification for fast BCI control

One of the major aims of BCI research is devoted to achieving faster and more efficient control of external devices. The identification of individual tap events in a motor imagery BCI is therefore a desirable goal. EEG is recorded from subjects performing and imagining finger taps with their left and right hands. A Differential Evolution based feature selection wrapper is used in order to identify optimal features in the spatial and frequency domains for tap identification. Channel-frequency band combinations are found which allow differentiation of tap vs. no-tap control conditions for executed and imagined taps. Left vs. right hand taps may also be differentiated with features found in this manner. A sliding time window is then used to accurately identify individual taps in the executed tap and imagined tap conditions. Highly statistically significant classification accuracies are achieved with time windows of 0.5 s and more allowing taps to be identified on a single trial basis.

Autonomous ship collision free trajectory navigation and control algorithms

A new autonomous ship collision free (ASCF) trajectory navigation and control system has been introduced with a new recursive navigation algorithm based on analytic geometry and convex set theory for ship collision free guidance. The underlying assumption is that the geometric information of ship environment is available in the form of a polygon shaped free space, which may be easily generated from a 2D image or plots relating to physical hazards or other constraints such as collision avoidance regulations. The navigation command is given as a heading command sequence based on generating a way point which falls within a small neighborhood of the current position, and the sequence of the way points along the trajectory are guaranteed to lie within a bounded obstacle free region using convex set theory. A neurofuzzy network predictor which in practice uses only observed input/output data generated by on board sensors or external sensors (or a sensor fusion algorithm), based on using rudder deflection angle for the control of ship heading angle, is utilised in the simulation of an ESSO 190000 dwt tanker model to demonstrate the effectiveness of the system.

Reduced complexity set-point following in self-tuning control

An external input signal is incorporated into a self-tuning controller which, although it is based on a CARMA system model, employs a state-space framework for control law calculations. Steady-state set point following can then be accomplished even when only a recursive least squares parameter estimation scheme is used, despite the fact that the disturbance affecting the system may well be coloured.

Incorporating HACCP into national food control systems - Analyzing progress in the United Arab Emirates

Today governments and other parties involved in food control are under constant pressure to find more efficient and effective mechanisms to carry out their mandates for food control. This has led to international recognition of the importance of the HACCP system as a food control tool and guidance on the role of government agencies in the application of such a system has been developed. Based on this international guidance, four main elements identified as key activities have been used in this study to evaluate the progress of HACCP implementation in the UAE. The internal Strengths and Weaknesses, as well as the external Opportunities and Threats that the government is facing towards the implementation of a HACCP-based food control system have been identified. The analysis shows that the government’s dedicated role has been an essential driving force to encourage the implementation of a HACCP-based food control system. Some areas of difficulty, including the dependence on high levels of food imports, are highlighted.

Whistle-blowing by external auditors: seeking legitimacy for the South African audit profession?

Auditing is often cited as playing an important role in managing agency-related costs and, accordingly, being integral to the sound functioning of capital markets. There may, however, be more to the attest function than a technical rational practice. By virtue of relying heavily on claims to technical expertise, professionalism, prudential judgement and public confidence, auditing is both a source of legitimacy for organisations and, paradoxically, dependent on claims to legitimacy for its continued existence. From this perspective, recent regulatory developments, purportedly enacted to increase arms-length control over the profession, may not only be about improving perceived audit quality and practice but also about ensuring continued faith in the well-established ‘rituals’ of the assurance function. A reporting duty imposed on South African external auditors, akin to whistle-blowing, is used as a case study to explore this perspective. In doing so, this paper contributes to the scant body of interpretive research on auditing, simultaneously offering one of the first insights into auditing regulation from an African perspective.