(Supplement) Groundwater quality in Lahore Pakistan: emphasis on Arsenic and Fluoride levels

The dataset provides detailed information on the study that was conducted in Lahore's 7 major towns. The sample was taken from 472 tubewells and analyzed for major cations and anions using APHA 2012 techniques as explained herein. Besides, E.coli determination was done to check for microbial contamination. The data includes results from PHREEQC modeling of As(III)/ As(V) species and saturation indices as well as Aquachem's computed hydrochemical water facies. The WHO (2011) and EPA standards included in Aquachem identified the parameters that where in violation. Bicarbonates dominated the groundwater types with 50.21% of the samples exceeding the EPA maximum permissible limit of 250 mg/L in drinking water. Similarly, 30.51% of the samples had TDS values greater than 500 mg/L while 85.38 % of the samples exceed 10 µg/L threshold limit value of arsenic. Also, instances of high magnesium hazard values were observed which requires constant assessment if the groundwater is used for irrigation. Higher than 50% MH values are detrimental to crops which may reduce the expected yields. The membrane filtration technique using m-Endo Agar indicated that 3.59% samples had TNC (too numerous to count) values for E.coli while 5.06% showed values higher than 0 cfu/ 100 ml acceptable value in drinking water. Any traces of E-coli in a groundwater sample indicate recent fecal contamination. Such outcomes signify presence of enteric pathogens. If the groundwater is not properly dosed with disinfectants it may cause harm to human health. It is concluded that more studies are needed and proper groundwater management implement to safeguard the lives of communities that depend solely on groundwater in the city.

Sediments in arctic sea ice - entrainment, characterization and quantification

Sediments in Arctic sea ice are important for erosion and redistribution and consequently a factor for the sediment budget of the Arctic Ocean. The processes leading to the incorporation of sediments into the ice are not understood in detail yet. In the present study, experiments on the incorporation of sediments were therefore conducted in ice tanks of The Hamburg Ship Model Basin (HSVA) in winter 1996/1997, These experiments showed that on average 75 % of the artificial sea-ice sediments were located in the brine-channel system. The sediments were scavenged from the water column by frazil ice. Sediments functioning as a nucleus for the formation of frazil ice were less important for the incorporation. Filtration in grease ice during relatively calm hydrodynamic conditions was probably an effective process to enrich sediments in the ice. Wave fields did not play an important role for the incorporation of sediments into the artificial sea ice. During the expedition TRANSDRIFT III (TDIII, October 1995), different types of natural, newly-formed sea ice (grease ice, nilas and young ice) were sampled in the inner Laptev Sea at the time of freeze-up. The incorporation of sediments took place during calm meteorological conditions then. The characteristics of the clay mineral assemblages of these sedirnents served as references for sea-ice sediments which were sampled from first-year drift ice in the outer Laptev Sea and the adjacent Arctic Ocean during the POLARSTERN expedition ARK-XI/1 (July-September 1995). Based on the clay mineral assemblages, probable incorporation areas for the sedirnents in first-year drift ice could be statistically reconstructed in the inner Laptev Sea (eastern, central, and Western Laptev Sea) as well as in adjacent regions. Comparing the amounts of particulate organic carbon (POC) in sea-ice sediments and in surface sediments from the shelves of potential incorporation areas often reveals higher values in sea-ice sediments (TDIII: 3.6 %DM; ARK-XI/1: 2.3 %DM). This enrichment of POC is probably due to the incorporation process into the sea ice, as could be deducted from maceral analysis and Rock-Eval pyrolysis. Both methods were applied in the present study to particulate organic material (POM) from sea-ice sediments for the first time. It was shown that the POM of the sea-ice sediments from the Laptev Sea and the adjacent Arctic Ocean was dominated by reworked, strongly fragmented, allochthonous (terrigenous) material. This terrigenous component accounted for more than 75 % of all counted macerals. The autochthonous (marine) component was also strongly fragmented, and higher in the sediments from newly-formed sea ice (24 % of all counted macerals) as compared to first-year drift ice (17 % of all counted macerals). Average hydroge indices confirmed this pattern and were in the transition zone between kerogen types II and III (TDIII: 275 mg KW/g POC; ARK-XI/1: 200 mg KW/g POC). The sediment loads quantified in natural sea ice (TDIII: 33.6 mg/l, ARK-XI/1: 49.0 mg/l) indicated that sea-ice sediments are an important factor for the sediment budget in the Laptev Sea. In particular during the incorporation phase in autumn and early winter, about 12 % of the sediment load imported annually by rivers into the Laptev Sea can be incorporated into sea ice and redistributed during calm meteorological conditions. Single entrainment events can incorporate about 35 % of the river input into the sea ice (ca. 9 x 10**6 t) and export it via the Transpolar Drift from the Eurasian shelf to the Fram Strait.

Status and constraints of costly port rejection : a case from the Vietnamese frozen seafood export industry

While the rising exports have been the source of growth for many developing countries in recent years, the rate of commodities rejected at the ports of developed countries has also been high. Yet why it has remained so despite the costs involved is mostly unknown. This paper takes a case of the frozen seafood export industry in Vietnam and examines the current status of port rejection, roles played by various stakeholders along the value chains, and the constraints faced by the Vietnamese producers and exporters. It concludes with some policy implications, including strengthening the enforcement mechanism of standards compliance particularly at the upstream of the value chain and providing public testing labs for small-scale producers.

Is the Vietnamese garment industry at a turning point? : upgrading from the export to the domestic market

Vietnam’s garment industry has been loosely characterized by the duality based on market orientation: export and domestic. Export-oriented garment suppliers were typically SOEs and foreign invested firms, while those producing for the domestic market have been mostly small, private companies. With a booming economy, other industrial sectors have emerged, and the garment industry is no longer the sector most favored by workers. Wage rates have been increasing, and a supplier’s ability to cope with this through successful upgrading has been the key determinant of whether it can further grow and flourish. Those who fail to cope are finding themselves in an increasingly difficult position. This paper looks at both the export- and domestic-oriented garment suppliers, and attempts to highlight how the industry can further develop by examining the bottlenecks that vary depending on the type of supplier. It suggests that in the long run, upgrading and value addition in the domestic market will be the key strategy.

How are global value chains fragmented and extended in China's domestic production networks?

Global value chains are supported not only directly by domestic regions that export goods and services to the world market, but also indirectly by other domestic regions that provide parts, components, and intermediate services to final exporting regions. In order to better understand the nature of a country’s position and degree of participation in global value chains, we need to more fully examine the role of individual domestic regions. Understanding the domestic components of global supply chains is especially important for large developing countries like China and India, where there may be large variations in economic scale and development between domestic regions. This paper proposes a new framework for measuring domestic linkages to global value chains. This framework measures domestic linkages by endogenously embedding a country’s domestic interregional input-output (IO) table in an international IO model. Using this framework, we can more clearly describe how global production is fragmented and extended through linkages across a country’s domestic regions. This framework will also enable us to estimate how value added is created and distributed in both domestic and international segments of global value chains. For examining the validity and usefulness of this new approach, some numerical results are presented and discussed based on the 2007 Chinese interregional IO table, China customs statistics at the provincial level, and World Input-Output Tables (WIOTs).

Tracing CO2 emissions in global value chains

This paper integrates two lines of research into a unified conceptual framework: trade in global value chains and embodied emissions. This allows both value added and emissions to be systematically traced at the country, sector, and bilateral levels through various production network routes. By combining value-added and emissions accounting in a consistent way, the potential environmental cost (amount of emissions per unit of value added) along global value chains can be estimated. Using this unified accounting method, we trace CO2 emissions in the global production and trade network among 41 economies in 35 sectors from 1995 to 2009, basing our calculations on the World Input–Output Database, and show how they help us to better understand the impact of cross-country production sharing on the environment.

Compilation of a regionally-extended inter-country input-output table and its application to global value chain analysis

Studies on the rise of global value chains (GVCs) have attracted a great deal of interest in the recent economics literature. However, due to statistical and methodological challenges, most existing research ignores domestic regional heterogeneity in assessing the impact of joining GVCs. GVCs are supported not only directly by domestic regions that export goods and services to the world market, but also indirectly by other domestic regions that provide parts, components, and intermediate services to final exporting regions. To better understand the nature of a country's position and degree of participation in GVCs, we need to fully examine the role of individual domestic regions. Understanding the domestic components of GVCs is especially important for larger economies such as China, the US, India and Japan, where there may be large variations in economic scale, geography of manufacturing, and development stages at the domestic regional level. This paper proposes a new framework for measuring domestic linkages to global value chains. This framework measures domestic linkages by endogenously embedding a target country's (e.g. China and Japan) domestic interregional input–output tables into the OECD inter-country input–output model. Using this framework, we can more clearly understand how global production is fragmented and extended internationally and domestically.

Unit Root Analysis of Traffic Time Series in Toll Highways

Concession contracts in highways often include some kind of clauses (for example, a minimum traffic guarantee) that allow for better management of the business risks. The value of these clauses may be important and should be added to the total value of the concession. However, in these cases, traditional valuation techniques, like the NPV (net present value) of the project, are insufficient. An alternative methodology for the valuation of highway concession is one based on the real options approach. This methodology is generally built on the assumption of the evolution of traffic volume as a GBM (geometric Brownian motion), which is the hypothesis analyzed in this paper. First, a description of the methodology used for the analysis of the existence of unit roots (i.e., the hypothesis of non-stationarity) is provided. The Dickey-Fuller approach has been used, which is the most common test for this kind of analysis. Then this methodology is applied to perform a statistical analysis of traffic series in Spanish toll highways. For this purpose, data on the AADT (annual average daily traffic) on a set of highways have been used. The period of analysis is around thirty years in most cases. The main outcome of the research is that the hypothesis that traffic volume follows a GBM process in Spanish toll highways cannot be rejected. This result is robust, and therefore it can be used as a starting point for the application of the real options theory to assess toll highway concessions.

Influence of origin of the beans on protein quality and nutritive value of commercial soybean meals.

Chemical composition and correlations between chemical analyses and protein quality of 454 batches of SBM of 3 different origins (USA, n=168; Brazil (BRA), n=139, and Argentine (ARG), n=147) were studied. Samples were collected during a 6-yr period. SBM from USA had more CP, sucrose and stachyose and less NDF (P<0.001) than SBM from ARG and BRA. CP content was negatively related (P<0.001) with sucrose for USA meals and with NDF for ARG and BRA meals. Also, P content was positively related (P<0.01) with CP content of the meals. PDI and KOH solubility were higher (P<0.001) for USA than for ARG or BRA SBM, values that were positively related (P<0.001) with trypsin inhibitor activity of the meals. In addition, USA meals had more lys, met+cys, thr, and trp than BRA and ARG meals (P < 0.001). Per unit of CP, lys content was negatively related (P<0.001) with CP content for USA, positively for BRA, and no relations was found for ARG meals. It is concluded that nutritive values and protein quality of the meals varied widely among soybean origins. Consequently, the origin of the beans should be considered in the evaluation of the nutritive value of commercial SBM for non-ruminant animals.

Estudios corológicos de plantas vasculares en la cuenca media del Tajo

Se ha realizado un estudio de la distribución de plantas vasculares en un territorio situado entre las provincias de Cuenca, Guadalajara, Madrid y Toledo (España). El territorio estudiado está en la Submeseta Sur de la península ibérica, al sur del Sistema Central, norte de los Montes de Toledo y oeste del Sistema Ibérico, en zonas sedimentarias con poco relieve y clima mediterráneo, con grandes contrastes de temperatura y precipitaciones muy irregulares. Coincide con las regiones naturales llamadas: “Alcarrias”, “Campiñas de Madrid y Guadalajara” y “Vegas de los ríos de la Cuenca del Tajo”. Es lo que he llamado Cuenca Media del Tajo. En una primera fase se ha estudiado la flora regional para adquirir conocimientos previos mediante las consultas bibliográficas y de herbarios, se ha contado con bases de datos disponibles para MA, MACB, MAF, JACA, AH, ABH, VAL, SALA y EMMA. Se han revisado las aportaciones propias que en los últimos años he realizado en el territorio en relación a los temas tratados en la tesis. El trabajo de campo ha consistido en la realización de inventarios de presencia de flora. Ha sido muy importante la tarea herborizadora para llegar a la correcta identificación de las especies colectadas en los inventarios. De esta forma el autor ha confeccionado un herbario propio JML que en el territorio muestreado ha reunido cerca de 15000 números en las cuatro provincias estudiadas. Se ha hecho un muestreo sistemático del territorio con unos 6000 listados de plantas. Se ha tomado como unidad de muestreo la cuadrícula de UTM de 1 km de lado incluida como una centésima parte de la cuadrícula de UTM de 10 km. Se han seguido criterios para uniformizar el muestreo. Se ha apuntado el tiempo empleado y la superficie muestreada estimada en cada toma de datos. El criterio mínimo que tienen que cumplir todas las cuadrículas en el área estudiada ha sido que para cada cuadrícula de UTM de 5 km se han realizado al menos 5 inventarios en 5 cuadrículas diferentes de UTM de 1 km y al menos en una hora de tiempo. La unidad de comparación ha sido la cuadrícula UTM de 5 km. Se han informatizado los inventarios de campo, para ello se ha creado la base de datos TESIS en Microsoft office –Access-. Las principales tablas son LOCALIDAD, en la que se anotan las características del lugar muestreado y ESPECIES, que lista las especies de flora consideradas en las cuatro provincias del estudio. Por medio de formularios se han rellenado las tablas; destaca la tabla ESPECIE INVENTARIO que relaciona las tablas ESPECIES y LOCALIDAD; esta tabla cuenta en este momento con unos 165.000 registros. En la tabla ESPECIES_FPVI se visualizan las especies recopiladas. Se ha creado un indicador llamado FPVI “Flora permanentemente visible identificable” que consiste en atribuir a cada especie unos índices que nos permiten saber si una determinada planta se puede detectar en cualquier época del año. Los resultados presentados son: Creación de la base de datos TESIS. El Catálogo Florístico de la Cuenca Media del Tajo, que es el catálogo de la flora de las cuatro provincias desde el principio de la sistemática hasta las Saxifragáceas. En total se han recopilado 1028 taxones distribuidos en 77 familias. Se ha calculado el índice FPVI, para las especies del catálogo. La finalidad para la que se ha diseñado este índice es para poder comparar territorios. Para el desarrollo de ambos resultados ha sido fundamental el desarrollo de la tabla ESPECIES_PVI de la base de datos TESIS. En la tabla ESPECIES_PVI se han apuntado las características ecológicas y se revisa la información bibliográfica disponible para cada especie; las principales fuentes de información consultadas han sido Flora iberica, el proyecto “Anthos” y las bases de datos de los herbarios. Se ha apuntado sí se ha visto, sí está protegida o sí en un endemismo. Otros resultados son: la localización de las cuadrículas de UTM de 10 km, con mayor número de endemismos o especies singulares, con mayor valor botánico. Se ha realizado un par de ejemplos de estudios de autoecología de especie, en concreto Teucrium pumilum y Clematis recta. Se han confeccionando salidas cartográficas de distribución de especies. Se ha elaborado el herbario JML. Se ha presentado una sencilla herramienta para incluir inventarios florísticos, citas corológicas, consultas de autoecología o etiquetado de pliegos de herbario. Como colofón, se ha colaborado para desarrollar una aplicación informática de visualización, análisis y estudio de la distribución de taxones vegetales, que ha utilizado como datos de partida un porcentaje importante de los obtenidos para esta tesis. ABSTRACT I have made a study of the distribution of vascular plants in a territory located between the provinces of Cuenca, Guadalajara, Madrid and Toledo (Spain). The studied area is in the “Submeseta” South of the Iberian Peninsula, south of the Central System, north of the Montes de Toledo and west of the Iberian System, in sedimentary areas with little relief and Mediterranean climate, with big temperature contrasts and irregular rainfall. Coincides with the natural regions called "Alcarrias", "countryside of Madrid and Guadalajara" and “Vegas River Tagus Basin”. This is what I have called Middle Tagus Basin. In a first step we have studied the regional flora to acquire prior knowledge through the literature and herbaria consultations, it has had available databases for MA, MACB, MAF, JACA, AH, ABH, VAL, SALA and EMMA herbaria. The contributions I have made in the last years in the territory in relation to the topics discussed in the thesis have been revised. The field work consisted of conducting inventories presence of flora. Botanize was a very important task to get to the correct identification of the species collected in inventories. In this way the author has made his own herbarium JML in the sampled area has met at least 15000 samples in the four studied provinces. There has been a systematic sampling of the territory with nearly 6,000 listings of plants. Was taken as the sampling unit grid UTM 1 km side included as a hundredth of the UTM grid of 10 km from side. Criteria have been taken to standardize the sampling. Data were taken of the time spent and the estimated sampled surface. The minimum criteria they have to meet all the grids in the study area has been that for each UTM grid of 5 km have been made at least 5 stocks in 5 different grids UTM 1 km and at least one hour of time. The unit of comparison was the UTM grid of 5 km. I have computerized inventories of field, for it was created a database in Access- Microsoft office -TESIS. The main tables are LOCALIDAD, with caracteristics of the sampled location and ESPECIES, which lists the plant species considered in the four provinces of the study, is. Through forms I filled in the tables; highlights ESPECIE INVENTARIO table that relates the tables ESPECIES and LOCALIDAD, this table is counted at the moment with about 165,000 records. The table ESPECIES FPVI visualizes all recollected species. We have created an indicator called FPVI "Flora permanently visible identifiable" that attributes to each species indices that allow us to know whether a given plant can be detected in any season. The results presented are: Creating data base TESIS. The Floristic Books Middle Tagus Basin, which is a catalog of the flora of the four provinces since the beginning of the systematic until Saxifragaceae. In total 1028 collected taxa in 77 families. We calculated FPVI index for species catalog. The purpose for which this index designed is, to compare territories. For the development of both results, it was essential to develop the table ESPECIES_PVI TESIS data base. Table ESPECIES_PVI has signed the ecological characteristics and bibliographic information available for each species is revised; the main sources of information has been Flora iberica, the Anthos project databases of herbaria. Targeted species has been recorded, when seen, protected or endemism. Have also been located UTM grids of 10 km, with the largest number of endemic or unique species and more botanical value. There have been a couple of species autecology studies, namely Teucrium pumilum and Clematis recta, as an example of this type of study. They have been putting together maps of species distribution. We made herbarium JML. I have presented a simple tool to include floristic inventories, chorological appointments, consultations or to tag autoecology herbarium specimens. To cap it has worked to develop a computer application for visualization, analysis and study of the distribution of plant taxa, which has used as input data a significant percentage of those obtained for this thesis.

Power Converter Topologies for a High Performance Transformer Rectifier Unit in Aircraft Applications

This paper presents some power converter architectures and circuit topologies, which can be used to achieve the requirements of the high performance transformer rectifier unit in aircraft applications, mainly as: high power factor with low THD, high efficiency and high power density. The voltage and the power levels demanded for this application are: three-phase line-to-neutral input voltage of 115 or 230V AC rms (360 – 800Hz), output voltage of 28V DC or 270V DC(new grid value) and the output power up to tens of kilowatts.