Validação de métodos para determinação do teor de 3-hidroxibutirato e 3-hidroxivalerato em polímero biodegradável

The efficiency of two methods for determining 3-hydroxybutyrate and 3-hydroxyvalerate content in the biopolymer (poly(3-hydroxybutyrate-co-3-hydroxyvalerate) has been evaluated. Both methods are based on (a) the hydrolysis of polymers, (b) the esterification with methyl (method A) and isoamilic alcohol (method B) and (c) analysis of the esters by gas chromatography using flame ionization detection (GC-FID). After optimization of the analytical conditions, the main validation parameters (linearity, quantification limit, detection limit, recovery, sensitivity and precision) were determined showing that both analytical procedures can be applied to control the process of poly(3-hydroxybutyrate) production. However, method B gives better analytical results than method A and has the advantage of not using chlorinated solvents.

Desenvolvimentos da biopolpação no Brasil

Biopulping is a technology which application can be advantageous to mechanical or chemical pulping. It presents benefits such as the creation of stronger pulp, as well as energy or chemicals savings. This paper gives an overview of the recent efforts to develop biopulping processes in Brazil as well as provides critical information on biopulping development worldwide. Eucalyptus grandis wood chips have been biotreated by Ceriporiopsis subvermispora in a 50-ton biopulping pilot-plant and used to produce TMP and CTMP pulps on a mill scale, Up to 18% and 27% energy savings have been observed for producing 450-470 CSFreeness TMP and CTMP pulps. Despite darker bio-TMP pulps are produced, one-stage bleaching with 5% H2O2 was sufficient to improve brightness values to 70% and 72% for bio-TMP and control pulps, respectively. Understanding biopulping mechanisms is also relevant because more resistant and competitive fungal species could be selected with basis on a function-directed screen-ing project. As far as the chemical changes induced by the fungus in wood are concerned, recent efforts have pointed out for two different types of wood transformations. One of them involves intense lignin depolymerization in short biotreatment periods, while the other indicates that esterification reactions of oxalate secreted by the Jungas on the polysaccharides chains increase the water saturation point of the fibers. Both transformations are expected to affect the fiber-fiber bonding and, consequently, the physical resistance of wood.

Purification of an exopolygalacturonase from Penicillium viridicatum RFC3 produced in submerged fermentation

An exo-PG obtained from Penicillium viridicatum in submerged fermentation was purified to homogeneity. The apparent molecular weight of the enzyme was 92 kDa, optimum pH and temperature for activity were pH 5 and 50-55°C. The exo-PG showed a profile of an exo-polygalacturonase, releasing galacturonic acid by hydrolysis of pectin with a high degree of esterification (D.E.). Ions Ca 2+ enhanced the stability of enzyme and its activity by 30%. The K m was 1.30 in absence of Ca 2+ and 1.16mg mL -1 in presence of this ion. In relation to the Vmax the presence of this ion increased from 1.76 to 2.07 μmol min -1mg -1. Copyright © 2009 Eleni Gomes et al.

Energy Metabolism in Cardiac Remodeling and Heart Failure

Fatty acids are the main substrates used by mitochondria to provide myocardial energy under normal conditions. During heart remodeling, however, the fuel preference switches to glucose. In the earlier stages of cardiac remodeling, changes in energy metabolism are considered crucial to protect the heart from irreversible damage. Furthermore, low fatty acid oxidation and the stimulus for glycolytic pathway lead to lipotoxicity, acidosis, and low adenosine triphosphate production. While myocardial function is directly associated with energy metabolism, the metabolic pathways could be potential targets for therapy in heart failure. © 2013 by Lippincott Williams & Wilkins.

Produção de lipase por Fusarium oxysporum em fermentação em estado sólido e sua aplicação em reações de síntese de ésteres de biodiesel

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Caracterização físico-química de pectinases extracelulares purificadas de Aspergillus giganteus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Síntese e aplicação de catalisadores à base de óxidos de cério, tungstênio e HZSM-5 para a produção do biodiesel

This work presents a study on the production of biodiesel by esterification reaction of oleic acid with methanol using batch reactor and different catalysts based on CeO2 and WO3 and HZSM-5. Acid treatment was performed in order to increase the catalytic activity. Different characterization techniques were performed, among them X-ray diffraction (XRD), Thermogravimetric analysis TGA/DTA, Spectroscopy in the Region in Fourier Transform Infrared (FTIR) and X-ray fluorescence (XRF). The effects of independent variables: temperature, molar ratio of oil: alcohol and the amount of catalyst and their interactions on the dependent variable (conversion of oleic acid to the corresponding ester). Overall, through the results obtained in the characterization was observed that the applied treatments were efficient, however the XRF technique, indicated that tungsten oxide leaching could occur during the preparation of the materials. The treatments performed on HZSM-5 caused no significant changes in the structure indicating that the zeolite was quite resistant to the treatments used. It was evaluated using complete 23 factorial design. For the catalysts investigated, the best reaction conditions were obtained when using higher levels of the independent variables temperature and amount of catalyst. However, for the variable molar ratio the lowest level showed significant yields for most of the synthesized catalyst, obtaining maximum conversion to the OC (67.97%), OW (74.37%), HZSM-5 (61.16%) OC-OW 1 (75.93%), OC-OW 2 (82.57%), OC-OW 3 (79.15%), S/OC-OW 1 (86.90%), S/OC-OW 2 (91.04%), S/OC-OW 3 (88.60%), S/OC-OW/H 1 (92.34%), S/OC-OW/H 2 (100%) and S/OC-OW/H 3 (98.16%). According to the experimental design, the temperature has the biggest influence on the reaction variable for all the synthesized catalysts. Among the catalysts investigated S/OC-OW/H 2 e S/OC-OW/H 3 were more effective. Reuse tests showed that the catalyst activity decreased after each cycle, indicating that the regeneration process was effective. The leaching test indicated that the catalysts are heterogeneous in the evaluated operating range. The catalysts investigated showed themselves promising for the production of biodiesel.

Produção de biodiesel etílico com uso de lipases extracelulares de fungos termofílicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Síntese e caracterização de amino ácidos e ésteres n-(aminoalquil)-lactâmicos derivados do paba com potencial atividade biológica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Materiais compósitos orgânicos-inorgânicos a base de celulose bacteriana com peptídeos regulatórios de fatores de crescimento, OGP e OGP [10-14], para regeneração óssea

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção de biodiesel através da hidroesterificação do óleo de andiroba (Carapa guianensis, Aubl.) via Catalise Heterogenea Acida

O processo de hidroesterificação (hidrolise seguida de esterificação) se constitui como uma alternativa ao processo convencional de produção de biodiesel, pois permite o uso de matérias-primas de qualquer teor de água e de ácidos graxos. O biodiesel foi gerado a partir da esterificação do óleo de andiroba com alto teor de ácidos graxos sendo utilizado o oxido de nióbio em pó da CBMM (HY-340) como catalisador. Para execução dos experimentos foi utilizado um reator autoclave (batelada). A reação de hidrolise foi conduzida na temperatura de 300°C, ~1200psi e razão molar água/óleo de 20. Nas reações de esterificação foram observados os efeitos da razão molar metanol/acido graxo (1,2; 2,1 e 3,0), da temperatura (150, 175 e 200oC) e da concentração de catalisador (0, 10 e 20% m/m) tendo como resposta a conversão e a taxa inicial da reação. Os dados foram conduzidos segundo um planejamento experimental (fatorial com 23 e adição de 3 pontos centrais) analisado pelo programa Statistica. A conversão das reações de esterificação foi monitorada a partir de medidas titulometricas de acidez das alíquotas, retiradas nos tempos de 5, 10, 15, 20, 25, 30, 45 e 60 min. Nos experimentos de esterificação a maior conversão obtida foi 96,1% com temperatura de 200oC, 20% m/m de catalisador e razão molar metanol/acido igual a 3,0. Eliminando o catalisador e considerando os mesmos niveis para as outras duas variáveis analisadas (temperatura e razão molar), foi obtida uma conversão de 95,3%, porem foi observada uma taxa de conversão menor tendo-se um aumento de 35 minutos no tempo de reação comparando com a reação catalisada.

Produção de poligalacturonase termoestável pelo fungo Rhizomucor pusillus A 13.36 em fermentação em estado sólido, purificação e caracterização da enzima

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Seleção de fungos termofílicos para produção de lipase e aplicação na produção de biodiesel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Purificação e caracterização da poligalacturonase termoestável produzida pela linhagem fúngica Thermomucor indicae-seudaticae N31 em fermentação em estado sólido e submersa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção, purificação e propriedades bioquímicas de lipase ácida de Candida viswanathii

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC