Regioregular poly(3-hexyl-thiophene) helical self-organization on carbon nanotubes

Mixtures of Regioregular Poly(3-hexyl-thiophene) (rrP3HT) and multi wall carbon nanotubes have been investigated by Scanning Tunneling Microscopy in Ultra High Vacuum. Carbon nanotubes covered by rrP3HT have been imaged and analyzed, providing a clear evidence that this polymer self assembles on the nanotube surface following geometrical constraints and adapting its equilibrium chain-to-chain distance. Largely spaced covered nanotubes have been analyzed to investigate the role played by nanotube chirality in the polymer wrapping, evidencing strong rrP3HT interactions along well defined directions.

Purity evaluation and influence of carbon nanotube on carbon nanotube/graphite thermal stability

High resolution thermogravimetry has been used to evaluate the carbonaceous content in a commercial sample of single-walled carbon nanotube (SWNT). The content of SWNTs in the sample was found to be at least 77mass% which was supported by images obtained with scanning and transmission electron microscopies (SEM and TEM). Furthermore, the influence of SWNT addition on the thermal stability of graphite in mixtures of SWNT/graphite at different proportions was investigated. The graphite stability decreased with the increased of SWNT content in the overall range of composition. This behavior could be due to the close contact between these carbonaceous species as determined by SEM analysis.

Vom Prosumer zum Produser : Ein neues Verständnis nutzergesteuerter Inhaltserschaffung

Alvin Tofflers Bild des Prosumers beeinflußt weiterhin maßgeblich unser Verständnis vieler heutzutage als „Social Media“ oder „Web 2.0“ beschriebener nutzergesteuerter, kollaborativer Prozesse der Inhaltserstellung. Ein genauerer Blick auf Tofflers eigene Beschreibung seines Prosumermodells offenbart jedoch, daß es fest im Zeitalter der Massenmedienvorherrschaft verankert bleibt: der Prosumer ist eben nicht jener aus eigenem Antrieb aktive, kreative Ersteller und Weiterbearbeiter neuer Inhalte, wie er heutzutage in Projekten von der Open-Source-Software über die Wikipedia bis hin zu Second Life zu finden ist, sondern nur ein ganz besonders gut informierter, und daher in seinem Konsumverhalten sowohl besonders kritischer als auch besonders aktiver Konsument. Hochspezialisierte, High-End-Konsumenten etwa im Hi-Fi- oder Automobilbereich stellen viel eher das Idealbild des Prosumers dar als das für Mitarbeiter in oft eben gerade nicht (oder zumindest noch nicht) kommerziell erfaßten nutzergesteuerten Kollaborationsprojekten der Fall ist. Solches von Tofflers in den 70ern erarbeiteten Modells zu erwarten, ist sicherlich ohnehin zuviel verlangt. Das Problem liegt also nicht bei Toffler selbst, sondern vielmehr in den im Industriezeitalter vorherrschenden Vorstellungen eines recht deutlich in Produktion, Distribution, und Konsum eingeteilten Prozesses. Diese Dreiteilung war für die Erschaffung materieller wie immaterieller Güter durchaus notwendig – sie ist selbst für die konventionellen Massenmedien zutreffend, bei denen Inhaltsproduktion ebenso aus kommerziellen Gründen auf einige wenige Institutionen konzentriert war wie das für die Produktion von Konsumgütern der Fall ist. Im beginnenden Informationszeitalter, beherrscht durch dezentralisierte Mediennetzwerke und weithin erhaltbare und erschwingliche Produktionsmittel, liegt der Fall jedoch anders. Was passiert, wenn Distribution automatisch erfolgt, und wenn beinahe jeder Konsument auch Produzent sein kann, anstelle einer kleinen Schar von kommerziell unterstützten Produzenten, denen bestenfallls vielleicht eine Handvoll von nahezu professionellen Prosumern zur Seite steht? Was geschieht, wenn sich die Zahl der von Eric von Hippel als ‚lead user’ beschriebenen als Produzenten aktiven Konsumenten massiv ausdehnt – wenn, wie Wikipedias Slogan es beschreibt, ‚anyone can edit’, wenn also potentiell jeder Nutzer aktiv an der Inhaltserstellung teilnehmen kann? Um die kreative und kollaborative Beteiligung zu beschreiben, die heutzutage nutzergesteuerte Projekte wie etwa die Wikipedia auszeichnet, sind Begriffe wie ‚Produktion’ und ‚Konsum’ nur noch bedingt nützlich – selbst in Konstruktionen wie 'nutzergesteuerte Produktion' oder 'P2P-Produktion'. In den Nutzergemeinschaften, die an solchen Formen der Inhaltserschaffung teilnehmen, haben sich Rollen als Konsumenten und Benutzer längst unwiederbringlich mit solchen als Produzent vermischt: Nutzer sind immer auch unausweichlich Produzenten der gemeinsamen Informationssammlung, ganz egal, ob sie sich dessens auch bewußt sind: sie haben eine neue, hybride Rolle angenommen, die sich vielleicht am besten als 'Produtzer' umschreiben lassen kann. Projekte, die auf solche Produtzung (Englisch: produsage) aufbauen, finden sich in Bereichen von Open-Source-Software über Bürgerjournalismus bis hin zur Wikipedia, und darüberhinaus auch zunehmend in Computerspielen, Filesharing, und selbst im Design materieller Güter. Obwohl unterschiedlich in ihrer Ausrichtung, bauen sie doch auf eine kleine Zahl universeller Grundprinzipien auf. Dieser Vortrag beschreibt diese Grundprinzipien, und zeigt die möglichen Implikationen dieses Übergangs von Produktion (und Prosumption) zu Produtzung auf.

Varieties of Asian capitalism : toward an institutional theory of Asian enterprise

In this paper we respond to calls for an institution-based perspective on strategy. With its emphasis upon mimetic, coercive, and normative isomorphism, institutional theory has earned a deterministic reputation and seems an unlikely foundation on which to construct a theory of strategy. However, a second movement in institutional theory is emerging that gives greater emphasis to creativity and agency. We develop this approach by highlighting co-evolutionary processes that are shaping the varieties of capitalism (VoC) in Asia. To do so, we examine the extent to which the VoC model can be fruitfully applied in the Asian context. In the spirit of the second movement of institutional theory, we describe three processes in which firm strategy collectively and intentionally feeds back to shape institutions: (1) filling institutional voids, (2) retarding institutional innovation, and (3) deploying institutional escape. We outline the key contributions contained in the articles of this Special Issue and discuss a research agenda generated by the VoC perspective.

Poly(3-hexyl-thiophene) coil-wrapped single wall carbon nanotube investigated by scanning tunneling spectroscopy

Scanning Tunneling Spectroscopy was performed on a (15,0) single wall carbon nanotube partially wrapped by Poly(3-hexyl-thiophene). On the bare nanotube section, the local density of states is in good agreement with the theoretical model based on local density approximation and remarkably is not perturbed by the polymer wrapping. On the coiled section, a rectifying current-voltage characteristic has been observed along with the charge transfer from the polymer to the nanotube. The electron transfer from Poly(3-hexyl-thiophene) to metallic nanotube was previously theoretically proposed and contributes to the presence of the Schottky barrier at the interface responsible for the rectifying behavior.

From surfboard wax to salient health inequity : School programs to develop globally aware and active citizens

During the past century, significant improvements in the prevention, detection and treatment of infectious disease have positively impacted upon quality and quantity of life for many people worldwide. Despite this progress, there are large numbers of people currently living in developing regions of the world where infectious disease continues unabated. SurfAid International is a humanitarian organisation that has brought significant health improvements to the people living on the Mentawai and Nias islands of Indonesia. The SurfAid International Schools Program aims to develop global citizenship and social responsibility by providing a bridge between school settings and the critical work of SurfAid International. This paper provides a rationale for the development of contextualised school based programs and identifies potential impact upon the thoughts and actions of young people in schools.

Preventing physical activity induced heat illness in school settings

The climatic conditions of tropical and subtropical regions within Australia present, at times, extreme risk of physical activity induced heat illness. Many administrators and teachers in school settings are aware of the general risks of heat related illness. In the absence of reliable information applied at the local level, there is a risk that inappropriate decisions may be made concerning school events that incorporate opportunities to be physically active. Such events may be prematurely cancelled resulting in the loss of necessary time for physical activity. Under high or extremely high risk conditions however, the absence of appropriate modifications or continuation could place the health of students, staff and other parties at risk. School staff and other key stakeholders should understand the mechanisms of escalating risk and be supported to undertake action to reduce the level of risk through appropriate policies, procedures, resources and action plans.

Prognosis of bearing failure based on health state estimation

This paper proposes a new prognosis model based on the technique for health state estimation of machines for accurate assessment of the remnant life. For the evaluation of health stages of machines, the Support Vector Machine (SVM) classifier was employed to obtain the probability of each health state. Two case studies involving bearing failures were used to validate the proposed model. Simulated bearing failure data and experimental data from an accelerated bearing test rig were used to train and test the model. The result obtained is very encouraging and shows that the proposed prognostic model produces promising results and has the potential to be used as an estimation tool for machine remnant life prediction.

Amniotic fluid stem cells produce robust mineral deposits on biodegradable scaffolds

Insufficient availability of osteogenic cells limits bone regeneration through cell-based therapies. This study investigated the potential of amniotic fluid–derived stem (AFS) cells to synthesize mineralized extracellular matrix within porous medical-grade poly-e-caprolactone (mPCL) scaffolds. The AFS cells were initially differentiated in two-dimensional (2D) culture to determine appropriate osteogenic culture conditions and verify physiologic mineral production by the AFS cells. The AFS cells were then cultured on 3D mPCL scaffolds (6-mm diameter9-mm height) and analyzed for their ability to differentiate to osteoblastic cells in this environment. The amount and distribution of mineralized matrix production was quantified throughout the mPCL scaffold using nondestructive micro computed tomography (microCT) analysis and confirmed through biochemical assays. Sterile microCT scanning provided longitudinal analysis of long-term cultured mPCL constructs to determine the rate and distribution of mineral matrix within the scaffolds. The AFS cells deposited mineralized matrix throughout the mPCL scaffolds and remained viable after 15 weeks of 3D culture. The effect of predifferentiation of the AFS cells on the subsequent bone formation in vivo was determined in a rat subcutaneous model. Cells that were pre-differentiated for 28 days in vitro produced seven times more mineralized matrix when implanted subcutaneously in vivo. This study demonstrated the potential of AFS cells to produce 3D mineralized bioengineered constructs in vitro and in vivo and suggests that AFS cells may be an effective cell source for functional repair of large bone defects

Produtzung : Von medialer zu politischer Partizipation

Wahrscheinlich war es ja nur ein Versuch einer alteingesessenen Institution der Massenmedien, sich bei „den Leuten, die man früher ‚das Publikum‘ nannte“ („the people formerly known as the audience“; Rosen, 2006, n.pag.) wieder einzuschmeicheln. Dennoch, die Anerkennung des kollektiven „You“ in YouTube und anderen kollaborativen Onlineplattformen als Person des Jahres durch das amerikanische Magazin Time (Grossman, 2007) liefert ein weiteres Indiz für die wachsende Bedeutung solcher Projekte zur gemeinschaftlichen Produktion und Distribution von Inhalten. Kreative Websites wie Flickr und YouTube, kollaborative Wissenssammlungen von Wikipedia über Digg bis zu Google Earth, nutzergesteuerte Diskussionen in Slashdot, OhmyNews, und der allgemeinen Blogosphäre, aber auch die Softwareentwicklungsgemeinschaften im Open‐Source‐Bereich – sie alle dienen als Beispiele für diese nun etablierten Trend zur Entwicklung neuer Produktions‐, Geschäfts‐, Gemeinschafts‐ und Selbstlenkungsmodelle, die wesentlich durch zunehmend komplexere Web‐2.0‐Tools unterstützt werden. Hinter diesen Beispielen wird eine allgemeiner Tendenz sichtbar, die aus ökonomischer Sicht bereits von Yochai Benkler als „commons‐based peer production“ (2006), und von Eric von Hippel als „democratizing innovation" (2005) beschrieben worden ist. Henry Jenkins spricht zudem von einer „convergence culture“ (2006), in der solche nutzergesteuerten Projekte operieren, und es können auch Verbindungen zwischen diesen stärker aktive gewordenen Nutzern und Alvin Tofflers professionellen Konsumenten, den „Prosumers“ ziehen (1971).

Integrated Diagnosis and Prognosis Model for High Pressure LNG Pump

In condition-based maintenance (CBM), effective diagnostics and prognostics are essential tools for maintenance engineers to identify imminent fault and to predict the remaining useful life before the components finally fail. This enables remedial actions to be taken in advance and reschedules production if necessary. This paper presents a technique for accurate assessment of the remnant life of machines based on historical failure knowledge embedded in the closed loop diagnostic and prognostic system. The technique uses the Support Vector Machine (SVM) classifier for both fault diagnosis and evaluation of health stages of machine degradation. To validate the feasibility of the proposed model, the five different level data of typical four faults from High Pressure Liquefied Natural Gas (HP-LNG) pumps were used for multi-class fault diagnosis. In addition, two sets of impeller-rub data were analysed and employed to predict the remnant life of pump based on estimation of health state. The results obtained were very encouraging and showed that the proposed prognosis system has the potential to be used as an estimation tool for machine remnant life prediction in real life industrial applications.

Implications of precursor chemistry on the alkaline hydrothermal synthesis of titania/titanate nanostructures

A systematic study of four parameters within the alkaline hydrothermal treatment of three commercial titania powders—anatase, rutile, and Degussa P25—was made. These powders were treated with 5, 7.5, 9, and 10 M NaOH between 100 and 220 °C for 20 h. The effects of alkaline concentration, hydrothermal temperature, and precursor phase and crystallite size on the resultant nanostructure formation have been studied through X-ray diffraction, Raman spectroscopy, transmission electron microscopy, and nitrogen adsorption. Through the correlation of these data, morphological phase diagrams were constructed for each commercial powder. Interpretation of the resultant morphological phase diagrams indicates that alkaline concentration and hydrothermal temperature affect nanostructure formation independently, where nanoribbon formation is significantly influenced by temperature for initial formation. The phase and crystallite size of the precursor also significantly influenced nanostructure formation, with rutile displaying a slower rate of precursor consumption compared with anatase. Small crystallite titania precursors formed nanostructures at reduced hydrothermal temperatures.

How current pedagogy methods in games teaching in the UK, Australia and the US have been shaped by historical, socio cultural, environmental and political constraints

Crucial to enhancing the status and quality of games teaching in schools is a developed understanding of the teaching strategies adopted by practitioners. In this paper, we will demonstrate that contemporary games‟ teaching is a product of individual, task and environmental constraints (Newell, 1986). More specifically, we will show that current pedagogy in the U.K., Australia and the United States is strongly influenced by historical, socio-cultural environmental and political constraints. In summary, we will aim to answer the question „why do teachers teach games the way they do.‟ In answering this question, we conclude that teacher educators, who are trying to influence pedagogical practice, must understand these potential constraints and provide appropriate pre-service experiences to give future physical education teachers the knowledge, confidence and ability to adopt a range of teaching styles when they become fully fledged teachers. Essential to this process is the need to enable future practitioners to base their pedagogical practice on a sound understanding of contemporary learning theories of skill acquisition.