Solar PV-powered SRM drive for EVs with flexible energy control functions

Electric vehicles (EVs) provide a feasible solution to reducing greenhouse gas emissions and thus become a hot topic for research and development. Switched reluctance motors (SRMs) are one of promised motors for EV applications. In order to extend the EVs’ driving miles, the use of photovoltaic (PV) panels on the vehicle helps decrease the reliance on vehicle batteries. Based on phase winding characteristics of SRMs, a tri-port converter is proposed in this paper to control the energy flow between the PV panel, battery and SRM. Six operating modes are presented, four of which are developed for driving and two for standstill on-board charging. In the driving modes, the energy decoupling control for maximum power point tracking (MPPT) of the PV panel and speed control of the SRM are realized. In the standstill charging modes, a grid-connected charging topology is developed without a need for external hardware. When the PV panel directly charges the battery, a multi-section charging control strategy is used to optimize energy utilization. Simulation results based on Matlab/Simulink and experiments prove the effectiveness of the proposed tri-port converter, which has potential economic implications to improve the market acceptance of EVs.

Techno-Economic Assessment of LNG and Diesel Production and Global Trading Based on Hybrid PV-Wind Power Plants and PtG, GtL and PtL Technologies

With growing demand for liquefied natural gas (LNG) and liquid transportation fuels, and concerns about climate change and causes of greenhouse gas emissions, this master’s thesis introduces a new value chain design for LNG and transportation fuels and respective fundamental business cases based on hybrid PV-Wind power plants. The value chains are composed of renewable electricity (RE) converted by power-to-gas (PtG), gas-to-liquids (GtL) or power-to-liquids (PtL) facilities into SNG (which is finally liquefied into LNG) or synthetic liquid fuels, mainly diesel, respectively. The RE-LNG or RE-diesel are drop-in fuels to the current energy system and can be traded everywhere in the world. The calculations for the hybrid PV-Wind power plants, electrolysis, methanation (H2tSNG), hydrogen-to-liquids (H2tL), GtL and LNG value chain are performed based on both annual full load hours (FLh) and hourly analysis. Results show that the proposed RE-LNG produced in Patagonia, as the study case, is competitive with conventional LNG in Japan for crude oil prices within a minimum price range of about 87 - 145 USD/barrel (20 – 26 USD/MBtu of LNG production cost) and the proposed RE-diesel is competitive with conventional diesel in the European Union (EU) for crude oil prices within a minimum price range of about 79 - 135 USD/barrel (0.44 – 0.75 €/l of diesel production cost), depending on the chosen specific value chain and assumptions for cost of capital, available oxygen sales and CO2 emission costs. RE-LNG or RE-diesel could become competitive with conventional fuels from an economic perspective, while removing environmental concerns. The RE-PtX value chain needs to be located at the best complementing solar and wind sites in the world combined with a de-risking strategy. This could be an opportunity for many countries to satisfy their fuel demand locally. It is also a specific business case for countries with excellent solar and wind resources to export carbon-neutral hydrocarbons, when the decrease in production cost is considerably more than the shipping cost. This is a unique opportunity to export carbon-neutral hydrocarbons around the world where the environmental limitations on conventional hydrocarbons are getting tighter.

Planning Processes for Transport Solutions An Application To the City of Bologna

Mathematical models and the involved methods applied to real contexts are essential tools for designing and evaluating solutions concerning physical elements and/or organizational components of transportation systems. To deal with this, the systems engineering approach is used, which considers the relationships among the transportation system elements and their performances. This approach allows quantifying the effects of transportation projects by taking into account the intrinsic complexity of the transportation system and then assessing the effects of solutions to solve – or mitigate – transportation problems. This thesis focuses on the application of the transport system engineering approach to a real city – Bologna, in northern Italy – in order to: 1. simulate the current transportation system conditions (status quo); 2. compare and assess the results obtained by two different approaches for simulating the link traffic flows on the road transportation network and their related impacts (externalities) 3. identify potential solutions to solve critical aspects, particularly in terms of traffic flow congestion and related environmental impacts (findings)

Forward-looking versus recursive-dynamic modeling in climate policy analysis: A comparison

This paper develops a multi-regional general equilibrium model for climate policy analysis based on the latest version of the MIT Emissions Prediction and Policy Analysis (EPPA) model. We develop two versions so that we can solve the model either as a fully inter-temporal optimization problem (forward-looking, perfect foresight) or recursively. The standard EPPA model on which these models are based is solved recursively, and it is necessary to simplify some aspects of it to make inter-temporal solution possible. The forward-looking capability allows one to better address economic and policy issues such as borrowing and banking of GHG allowances, efficiency implications of environmental tax recycling, endogenous depletion of fossil resources, international capital flows, and optimal emissions abatement paths among others. To evaluate the solution approaches, we benchmark each version to the same macroeconomic path, and then compare the behavior of the two versions under a climate policy that restricts greenhouse gas emissions. We find that the energy sector and CO(2) price behavior are similar in both versions (in the recursive version of the model we force the inter-temporal theoretical efficiency result that abatement through time should be allocated such that the CO(2) price rises at the interest rate.) The main difference that arises is that the macroeconomic costs are substantially lower in the forward-looking version of the model, since it allows consumption shifting as an additional avenue of adjustment to the policy. On the other hand, the simplifications required for solving the model as an optimization problem, such as dropping the full vintaging of the capital stock and fewer explicit technological options, likely have effects on the results. Moreover, inter-temporal optimization with perfect foresight poorly represents the real economy where agents face high levels of uncertainty that likely lead to higher costs than if they knew the future with certainty. We conclude that while the forward-looking model has value for some problems, the recursive model produces similar behavior in the energy sector and provides greater flexibility in the details of the system that can be represented. (C) 2009 Elsevier B.V. All rights reserved.

A DC-DC Step-Up mu-Power Converter for Energy Harvesting Applications, Using Maximum Power PointTracking, Based on Fractional Open Circuit Voltage

A DC-DC step-up micro power converter for solar energy harvesting applications is presented. The circuit is based on a switched-capacitorvoltage tripler architecture with MOSFET capacitors, which results in an, area approximately eight times smaller than using MiM capacitors for the 0.131mu m CMOS technology. In order to compensate for the loss of efficiency, due to the larger parasitic capacitances, a charge reutilization scheme is employed. The circuit is self-clocked, using a phase controller designed specifically to work with an amorphous silicon solar cell, in order to obtain themaximum available power from the cell. This will be done by tracking its maximum power point (MPPT) using the fractional open circuit voltage method. Electrical simulations of the circuit, together with an equivalent electrical model of an amorphous silicon solar cell, show that the circuit can deliver apower of 1132 mu W to the load, corresponding to a maximum efficiency of 66.81%.

Matching CO2 large point sources and potential geological storage sites in mainland Portugal

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia do Ambiente, Perfil Gestão e Sistemas Ambientais

PV inverters for module level applications

Dissertação para obtenção do Grau de Mestre em Energias Renováveis – Conversão Eléctrica e Utilização Sustentáveis

Solid and liquid biofuels markets in Finland - a study on international biofuels trade

This study considered the current situation of solid and liquid biofuels markets and international biofuels trade in Finland and identified the challenges ofthe emerging international biofuels markets for Finland. The fact that industryconsumes more than half of the total primary energy, widely applied combined heat and power production (CHP) and a high share of biofuels in the total energy consumption are specific to the Finnish energy system. One third of the electricity is generated in CHP plants. As much as 27% of the total energy consumption ismet by using wood and peat, which makes Finland the leading country in the use of biofuels. Finland has made a commitment to maintain greenhouse gas emissions at the 1990 level at the highest during the period 2008-2012. The Finnish energypolicy aims to achieve the target, and a variety of measures are taken to promote the use of renewable energy sources and especially wood fuels. In this study, the wooden raw material streams of the forest industry were included the international biofuels trade in addition to biomass streams that are traded for energy production. In 2004, as much as 45% of the raw wood importedinto Finland ended up in energy production. The total international trading of biofuels was evaluated at 72 PJ, of which the majority, 58 PJ, was raw wood. About 22% of wood based energy in Finland originated from imported raw wood. Tall oil and wood pellets composed the largest export streams of biofuels. The annual turnover of international biofuels trade was estimated at about ¤ 90 million fordirect trade and at about ¤ 190 million for indirect trade. The forest industryas the biggest user of wood, and the producer and user of wood fuels has a central position in biomass and biofuels markets in Finland. Lately, the international aspects of Finnish biofuels markets have been emphasised as the import of rawwood and the export of wood pellets have increased. Expanding the use of biofuels in the road transportation sector would increase the international streams ofbiofuels in Finland. In coming years, the international trading of biomass for energy purposes can be expected to continue growing.

IEA Bioenergy Task 40 “Sustainable International Bioenergy Trade: Securing supply and demand” Country report of Finland 2008

This study considered the current situation of biofuels markets in Finland. The fact that industry consumes more than half of the total primary energy, widely applied combined heat and power production and a high share of solid biomass fuels in the total energy consumption are specific to the Finnish energy system. Wood is the most important source of bioenergy in Finland, representing 21% of the total energy consumption in 2006. Almost 80% of the wood-based energy is recovered from industrial by-products and residues. Finland has commitment itself to maintaining its greenhouse gas emissions at the 1990 level, at the highest, during the period 2008–2012. The energy and climate policy carried out in recent years has been based on the National Energy and Climate introduced in 2005. The Finnish energy policy aims to achieve the target, and a variety of measures are taken to promote the use of renewable energy sources and especially wood fuels. In 2007, the government started to prepare a new long-term (up to the year 2050) climate and energy strategy that will meet EU’s new targets for the reduction of green house gas emissions and the promotion of renewable energy sources. The new strategy will be introduced during 2008. The international biofuels trade has a substantial importance for the utilisation of bioenergy in Finland. In 2006, the total international trading of solid and liquid biofuels was approximately 64 PJ of which import was 61 PJ. Most of the import is indirect and takes place within the forest industry’s raw wood imports. In 2006, as much as 24% of wood energy was based on foreignorigin wood. Wood pellets and tall oil form the majority of export streams of biofuels. The indirect import of wood fuels increased almost 10% in 2004–2006, while the direct trade of solid and liquid biofuels has been almost constant.

Euroopan unionin kestävyyskriteerien soveltuvuus liikenteen biopolttoaineiden kasvihuonekaasuvaikutusten arviointiin

Euroopan unioni on niin sanotussa RES-direktiivissä asettanut tavoitteet uusiutuvan energian käytön lisäämiseksi 10 %:iin liikenteen energian kulutuksesta kaikissa jäsenmaissa vuoteen 2020 mennessä. Eräs näistä uusiutuvan energian muodoista on biopolttoaineet. Tässä työssä testataan RES-direktiivissä esitettyä laskentamenetelmää biopolttoaineiden tuotannon ja käytön kasvihuonekaasupäästöjen arviointiin. Esimerkkitapauksena on yhdyskuntien ja teollisuuden jätemateriaalia raaka-aineena käyttävän jäte-etanoliprosessin ja siihen yhdistetyn sähköä ja lämpöä tuottavan CHP-laitoksen päästölaskenta. Laskennan yhteydessä käy ilmi RES-direktiivin laskentamenetelmän tulkinnanvaraisuus. Laskentamenetelmän perusteella järjestelmäraja voidaan asettaa usealla eri tavalla, jolloin saadut päästövähennystulokset vaihtelevat huomattavasti eri tulkintavaihtoehtojen välillä. Jäte-etanolin tapauksessa tulokset ovat myös hyvin riippuvaisia jätemateriaalille määritellystä päästökertoimesta. Laskennan perusteella voidaankin sanoa, että RES-direktiivin laskentamenetelmällä saadut päästövähennystulokset biopolttoaineille ovat hyvin epävarmoja ja riippuvat sekä laskennan lähtöoletuksista että direktiivin tulkintatavasta. RES-direktiivin laskentamenetelmää voidaan myös pitää hyvin suppeana lähestymistapana biopolttoaineiden kasvihuonekaasuvaikutusten arviointiin. Tarkastelua tehdään suppealla järjestelmärajalla ja esimerkiksi biopolttoaineketjujen aiheuttamat epäsuorat ilmastovaikutukset jäävät huomioimatta. RES-direktiivin laskentamenetelmä perustuu perinteiseen staattiseen elinkaariarviointiin eli syytarkasteluun eikä sovellu arvioimaan muutosta. Ilmastomuutoksen hillinnän haastavuuden ja kiireellisyyden vuoksi biopolttoaineiden ilmastovaikutuksia tulisi kuitenkin arvioida myös laajemmin muutostarkasteluna, ja verrata biopolttoaineiden avulla saatuja päästövähennyksiä muilla keinoin saavutettuihin päästövähennyksiin. Näin voitaisiin paremmin arvioida sitä, mitkä keinot soveltuvat parhaiten nopeiden päästövähennysten saavuttamiseen.

Integration of the Food Waste Disposer Unit to the Existing Sewage System

Among the numerous approaches to food waste treatment, the food waste disposers method (FWDs), as a newcomer, has become slowly accepted by the general public owing to the worries about its impact on the existing sewage system. This paper aims to justify the role of FWDs in the process of urbanization in order to better prepare a city to take good care of the construction of its infrastructure and the solid waste treatment. Both the literatures and the case study help to confirm that FWDs has no negative effects on the wastewater treatment plant and it is also environmental friendly by reducing the greenhouse gas emissions. In the case study, the Lappeenranta waste water treatment plant has been selected in order to figure out the possible changes to a WWTP following the integration of FWDs: the observation shows only minor changes take place in a WWTP, in case of 25% application, like BOD up 7%, TSS up 6% and wastewater flowrate up 6%, an additional sludge production of 200 tons per year and the extra yield of methane up to 10000m3 per year; however, when the utilization rate of FWD is over 75%, BOD, TSS, and wastewater flowrate will experience more significant changes, thus exerting much pressure on the existing WWTP. FWDs can only be used in residential areas or cities equipped with consummate drainage network within the service sphere of WWTP, therefore, the relevant authority or government department should regulate the installation frequency of FWDs, while promoting the accessory application of FWDs. In the meanwhile, WWTP should improve their treatment process in order to expand their capacity for sludge treatment so as to stay in line with the future development of urban waste management.

Hakkuutähteestä valmistetun pyrolyysiöljyn elinkaaren kasvihuonekaasupäästöt

Kasvihuonekaasupäästöjen vähentämiseksi ja uusiutuvan energian käytön lisäämiseksi EU:ssa on säädetty direktiivi uusiutuvan energian käytön edistämisestä(RES-direktiivi). Direktiivissä annetaan ohjeet biopolttoaineiden ja bionesteiden kasvihuonekaasuvaikutusten laskemiseen. Tämän työn tarkoituksena oli selvittää, täyttääkö hakkuutähteistä valmistettu pyrolyysiöljy RES-direktiivin asettamat määrälliset vaatimukset kasvihuonekaasujen päästövähennykselle silloin, kun pyrolyysiöljyllä korvataan raskasta polttoöljyä lämmöntuotannossa. Laskenta suorittiin direktiivin ohjeiden mukaan. Lisäksi työssä pohdittiin laskentamenetelmän soveltuvuutta pyrolyysiöljyn ilmastovaikutusten arviointiin yleisesti. Laskennassa huomioitiin raaka-aineen tuotannosta, jalostuksesta sekä kuljetuksesta ja jakelusta aiheutuvat kasvihuonekaasupäästöt. Päästöt laskettiin ensin oletusarvoilla, jonka jälkeen suoritettiin todennäköisyyspohjainen herkkyystarkastelu valituille parametreille. Herkkyystarkastelun tuloksista huomattiin, että päästövähennys riippuu pääasiassa kahdesta tekijästä: maaperän hiilitaseen muutoksesta aiheutuvista päästöistä ja pyrolyysiprosessin tarvitseman lämmön tuotantoon käytetyistä polttoaineista. Eniten tuloksiin vaikutti kuitenkin se, oletettiinko pyrolysaattori ja kattila tarkastelussa erillisiksi yksiköiksi (tapaus 1) vai kokonaisuudeksi (tapaus 2). Tulosten perusteella näyttää siltä, että pyrolyysiöljyn käyttö lämmöntuotannossa raskaan polttoöljyn sijasta johtaa päästövähennyksiin. Saatuja tuloksia ei kuitenkaan voida pitää ennusteina pyrolyysiöljyn todellisista ilmastovaikutuksista, koska elinkaariarviointiin liittyy monia epävarmuuksia. RES-direktiivin laskentaohjeet esimerkiksi järjestelmärajausten muodostamisesta ja päästöjen kohdentamisesta ovat epätarkat. Tästä syystä direktiiviä on mahdollista tulkita usealla eri tavalla, jolloin toisistaan poikkeavat tulokset voivat silti olla kaikki direktiivin mukaisesti laskettuja. Jotta liika tulkinnanvaraisuus ei aiheuttaisi ongelmia, olisi RES-direktiivin laskentaohjetta hyvä tarkentaa.

Economical potential of controlling charging of electric vehicles by using price signal

The number of electric vehicles grows continuously and the implementation of charging electric vehicles is an important issue for the future. Increasing amount of electric vehicles can cause problems to distribution grid by increasing peak load. Currently charging of electric vehicles is uncontrolled, but as the amount of electric vehicles grows, smart charg-ing (controlled charging) will be one possible solution to handle this situation. In this thesis smart charging of electric vehicles is examined from electricity retailers` point of view. The purpose is to find out plausible saving potentials of smart charging, when it´s controlled by price signal. Saving potential is calculated by comparing costs of price signal controlled charging and uncontrolled charging.

Sähkö- ja lämpöenergian tuotantomenetelmien ympäristöllisen kilpailukyvyn määrittäminen alueellista energiajärjestelmää suunniteltaessa

Työssä tarkasteltiin sähkö- ja lämpöenergian tuotantomenetelmien ympäristöllistä kilpailukykyä osana yhdyskunnan energiajärjestelmää. Sähkö- lämpöenergian tuotantomenetelmiä vertailtiin keskenään aiheutuvien kasvihuonekaasupäästöjen perusteella. Tarkastelu toteutettiin elinkaariarviointimenetelmällä. Työssä mallinnettiin pääasiassa uusiutuviin energialähteisiin perustuvia menetelmiä yhdyskunnan vuotuisen sähkö- ja lämpöenergiantarpeen täyttämiseksi. Elinkaariarviointimallin avulla vertailtiin keskenään aurinko- ja tuulisähköpainotteista ja CHP-painotteista energiajärjestelmää. Lisäksi työssä arvioitiin aurinko- ja tuulisähköntuotantoa sekä CHP-tuotantoa nettoenergianäkökulmasta. Työn tulosten pohjalta voidaan olettaa, että kokonaisvaltaisesti paras energianhankintavaihtoehto on usean eri sähkö- ja lämpöenergiantuotantomenetelmän yhdistelmä. Alhainen päästötaso tietyssä kategoriassa on yhdentekevää, jos energiaa ei ole saatavissa silloin, kun sitä tarvitaan. Lisäksi on tärkeää huomata, että uusiutuvien energialähteiden hyödynnettävyys riippuu vahvasti alueellisista erityispiirteistä, kuten aurinko- ja tuuliolosuhteista. Tästä johtuen kestävän energiajärjestelmän suunnittelussa alueellisten ominaisuuksien huomiointi on tärkeää. Mikä tietyllä alueella osoittautuu parhaimmaksi ratkaisuksi, ei välttämättä ole sitä toisenlaisessa ympäristössä.