Analysis of heat transfer and fluid flow in a triangular enclosure in presence of an adiabatic fin

Natural convection thermal boundary layer adjacent to the heated inclined wall of a right angled triangle with an adiabatic fin attached to that surface is investigated by numerical simulations. The finite volume based unsteady numerical model is adopted for the simulation. It is revealed from the numerical results that the development of the boundary layer along the inclined surface is characterized by three distinct stages, i.e. a start-up stage, a transitional stage and a steady stage. These three stages can be clearly identified from the numerical simulations. Moreover, in presence of adiabatic fin, the thermal boundary layer adjacent to the inclined wall breaks initially. However, it is reattached with the downstream boundary layer next to the fin. More attention has been given to the boundary layer development near the fin area.

Situational non-flammable control valves for oxygen service

Past work has clearly demonstrated that numerous commonly used metallic materials will support burning in oxygen, especially at higher pressures. An approach to rectify this significant safety problem has been successfully developed and implemented by applying the concept of Situational Non-Flammability. This approach essentially removes or breaks one leg of the conceptual fire triangle, a tool commonly used to define the three things that are required to support burning; a fuel, an ignition source and an oxidizer. Since an oxidiser is always present in an oxygen system as are ignition sources, the concept of Situational Non-Flammability essentially removes the fuel leg of the fire triangle by only utilising materials that will not burn at the maximum pressure, for example, that the control valve is to be used in. The utilisation of this approach has lead to the development of a range of oxygen components that are practically unable to burn while in service at their design pressure thus providing an unparalleled level of first safety while not compromising on the performance or endurance required in the function of these components. This paper describes the concept of Situational Non-Flammability, how it was used to theoretically evaluate designs of components for oxygen service and the outcomes of the actual development, fabrication and finally utilisation of these components in real oxygen systems in a range of flow control devices.

Dots versus antidots : computational exploration of structure, magnetism, and half-metallicity in boron−nitride nanostructures

Triangle-shaped nanohole, nanodot, and lattice antidot structures in hexagonal boron-nitride (h-BN) monolayer sheets are characterized with density functional theory calculations utilizing the local spin density approximation. We find that such structures may exhibit very large magnetic moments and associated spin splitting. N-terminated nanodots and antidots show strong spin anisotropy around the Fermi level, that is, half-metallicity. While B-terminated nanodots are shown to lack magnetism due to edge reconstruction, B-terminated nanoholes can retain magnetic character due to the enhanced structural stability of the surrounding two-dimensional matrix. In spite of significant lattice contraction due to the presence of multiple holes, antidot super lattices are predicted to be stable, exhibiting amplified magnetism as well as greatly enhanced half-metallicity. Collectively, the results indicate new opportunities for designing h-BNbased nanoscale devices with potential applications in the areas of spintronics, light emission, and photocatalysis.

Effect of an adiabatic fin on natural convection heat transfer in a triangular enclosure

Natural convection thermal boundary layer adjacent to the heated inclined wall of a right angled triangle with an adiabatic fin attached to that surface is investigated by numerical simulations. The finite volume based unsteady numerical model is adopted for the simulation. It is revealed from the numerical results that the development of the boundary layer along the inclined surface is characterized by three distinct stages, i.e. a start-up stage, a transitional stage and a steady stage. These three stages can be clearly identified from the numerical simulations. Moreover, in presence of adiabatic fin, the thermal boundary layer adjacent to the inclined wall breaks initially. However, it is reattached with the downstream boundary layer next to the fin. More attention has been given to the boundary layer development near the fin area.

Defining mega project success in Australian defence : a relation-based framework for value co-creation with project stakeholders

Defining success in mega projects has been a challenging exercise for Australian Defence. The inherent conflict between nation capability building and cost efficiency raises questions about how to appropriately define mega project success. Contrary to the traditional output-focused project methodology, the value creation perspective argues for the importance of creating new knowledge, processes, and systems for suppliers and customers. Stakeholder involvement is important in this new perspective, as the balancing of competing needs of stakeholders in mega projects becomes a major challenge in managing the value co-creation process. In our earlier study reported interview data from three Australian defence mega projects and reported that those senior executives have a more complex understanding of project success than traditional iron triangle measures. In these mega defence projects, customers and other stakeholders actively engage in the value creation process, and over time both content and process value are created to increase defence and national capability. Value created and captured during and post projects are the key to true success. We aim to develop a comprehensive theoretical model the capture the value co-creation process as a way of re-conceptualising success in mega projects. We propose a new framework redefine project value as multi-dimensional, contextual and temporal construct that emerges from the interactions among multiple stake holders over the complete project life cycle. The framework distinguishes between exploitation and exploration types of projects, and takes into consideration the requisite governance structures.

Introducing standardized protocols for anthropological measurement of virtual subadult crania using computed tomography

Objectives This study introduces and assesses the precision of a standardized protocol for anthropometric measurement of the juvenile cranium using three-dimensional surface rendered models, for implementation in forensic investigation or paleodemographic research. Materials and methods A subset of multi-slice computed tomography (MSCT) DICOM datasets (n=10) of modern Australian subadults (birth—10 years) was accessed from the “Skeletal Biology and Forensic Anthropology Virtual Osteological Database” (n>1200), obtained from retrospective clinical scans taken at Brisbane children hospitals (2009–2013). The capabilities of Geomagic Design X™ form the basis of this study; introducing standardized protocols using triangle surface mesh models to (i) ascertain linear dimensions using reference plane networks and (ii) calculate the area of complex regions of interest on the cranium. Results The protocols described in this paper demonstrate high levels of repeatability between five observers of varying anatomical expertise and software experience. Intra- and inter-observer error was indiscernible with total technical error of measurement (TEM) values ≤0.56 mm, constituting <0.33% relative error (rTEM) for linear measurements; and a TEM value of ≤12.89 mm2, equating to <1.18% (rTEM) of the total area of the anterior fontanelle and contiguous sutures. Conclusions Exploiting the advances of MSCT in routine clinical assessment, this paper assesses the application of this virtual approach to acquire highly reproducible morphometric data in a non-invasive manner for human identification and population studies in growth and development. The protocols and precision testing presented are imperative for the advancement of “virtual anthropology” into routine Australian medico-legal death investigation.

'Means to ends': Integration for stakeholder engagement.

In project management today, sustainability considerations are becoming increasingly necessary as an inclusion into project discovery, design and delivery phase methodologies. However, sustainability cannot always be tacked on to traditional project management approaches and still achieve the best project outcomes. Throw in the particular considerations for a culturally specific project, as for Aboriginal and Torres Strait Islander people, and the traditional project management approach is at risk of not meeting the needs of stakeholders or their engagement. In this presentation, we will briefly demonstrate how from beginning with sustainability considerations and integrating both project management principles and Aboriginal and Torres Strait Islander va lu es that QUT's Oodgeroo Unit is actioning a 'means to ends' integration approach for stakeholder engagement in two national Aboriginal and Torres Strait Islander projects. The iterative discovery and design of the federally Higher Education Participation and Partnerships Program (HEPPP) funded Aboriginal and Torres Strait Islander Higher Education Social Marketing Strategy (Strategy) and the Aboriginal and Torres Strait Islander Higher Education Portal (Portal) projects is being informed through a 'means' to 'ends' user- and design -led project management approach for inclusivity, visioning, and participation informing these projects for susta inable national deliverables. This approach draws upon the integration of Sustain ability Development Pillars and Project Management Pillars with the contextual lens of our proposed Aboriginal and Torres Strait Islander Pillars as the underpinning methodology of the Strategy and Portal Project's Communication and Collaboration Plan and approach with stakeholders. These th ree Pillars are integrated further through participatory consideration and inclu sion of comparative models: Daly's Sustainability Triangle, Walker's Object Design, Maslow's Hierarchy of Human Needs, Olsen's Four Layers of Communication,Project Management In stitute's (PMI's) Integrated Framework for Organisational Project Management, with the Aborig inal and Torres Strait Islander six core research ethics values. This presentation invites participants to join us in envisioning the 'ultimate means' of Environment, Del ivery and Sovereignty, through Economy, Design and Self-determination to the 'ultimate ends' of Social, Discove ry and Cultural Safety principles through stakeholder engagement.

EUTOPIA 75+ : exploratory futures scenarios for baby boomers’ preferred living spaces

Australia is experiencing the global phenomenon of an ageing population with the baby boomer generation starting to reach retirement age in large numbers. As a result, there is a growing need for appropriate accommodation and this will continue to grow for the foreseeable future. However, the needs of the fit, mobile and techno savvy baby boomers are likely to be far different from those of previous generations of older people, but are as yet unknown and unanticipated. This paper reports on the findings of a Futuring research project to explore the preferred housing futures for the baby boomer generation in the city of Brisbane, an aspiring creative city in South East Queensland (SEQ), Australia. Their future home design and service needs are predicted by firstly employing a global environmental scan of related and associated ageing futures issues. This was followed by a micro-Futuring workshop, based on Inayatullah’s Futures Triangle Analysis, to identify a range of scenarios. The key aspects of the workshop culminated in the development of a Transformational Scenario – EUTOPIA 75+. From this, a suite of six design recommendations for seniors’ housing design and smart services provision are synthesised to give a sense of direction of preferred living styles, especially in terms of physical housing spaces, with a view to identifying new house design opportunities for the allied industries and research organisations. The issues identified are also of concern for aged care service providers, retirement living developers, and for academics involved in the social and physical design of living spaces for older people.

Topology-Guided Tessellation Of Quadratic Elements

Topology-based methods have been successfully used for the analysis and visualization of piecewise-linear functions defined on triangle meshes. This paper describes a mechanism for extending these methods to piecewise-quadratic functions defined on triangulations of surfaces. Each triangular patch is tessellated into monotone regions, so that existing algorithms for computing topological representations of piecewise-linear functions may be applied directly to the piecewise-quadratic function. In particular, the tessellation is used for computing the Reeb graph, a topological data structure that provides a succinct representation of level sets of the function.

Getting value out of your sensory testing - the difference from control test

Non-parametric difference tests such as triangle and duo-trio tests traditionally are used to establish differences or similarities between products. However they only supply the researcher with partial answers and often further testing is required to establish the nature, size and direction of differences. This paper looks at the advantages of the difference from control (DFC) test (also known as degree of difference test) and discusses appropriate applications of the test. The scope and principle of the test, panel composition and analysis of results are presented with the aid of suitable examples. Two of the major uses of the DFC test are in quality control and shelf-life testing. The role DFC takes in these areas and the use of other tests to complement the testing is discussed. Controls or standards are important in both these areas and the use of standard products, mental and written standards and blind controls are highlighted. The DFC test has applications in products where the duo-trio and triangle tests cannot be used because of the normal heterogeneity of the product. While the DFC test is a simple difference test it can be structured to give the researcher more valuable data and scope to make informed decisions about their product.

Optimum choice of wavelengths in the anomalous scattering technique with synchrotron radiation

A formula has been derived for the mean-square error in the phases of crystal reflections determined through the multiwavelength anomalous scattering method.The error is written in terms of a simple function of the positions in the complex plane of the 'centres' corresponding to the different wavelengths. For the case of three centres, the mean-square error is inversely proportional to the area of the triangle formed by them.

The influence of planting density on the production of 'Goldfinger' (Musa spp., AAAB) in the subtropics

'Goldfinger', a tetraploid banana produced from the Fundación Hondureña de Investigación Agrícola (FHIA) breeding program, was released to the Australian industry in 1995. It was promoted as an apple-flavoured dessert banana with resistance to Fusarium wilt race 1 and subtropical race 4, as well as resistance to black and yellow Sigatoka (Mycosphaerella fijiensis and M. musicola, respectively). This study was initiated to provide agronomic information to the banana industry, which was under threat from Fusarium wilt, on a new cultivar which could replace 'Williams' (AAA, Cavendish subgroup) or 'Lady Finger' (AAB, Pome subgroup) in those areas affected by Fusarium wilt. Also few studies had reported on the production characteristics of the new tetraploid hybrids, especially from subtropical areas, and therefore two field sites, one a steep-land farm and the other a level, more productive site, were selected for planting density and spatial arrangement treatments. The optimum density in terms of commercial production, taking into account bunch weight, finger size, length of the production cycle, plant height and ease of management, was 1680 plants/ha on the steep-land site where plants were planted in single rows with 2.5 m × 2.5 m spacings. However on the level site a double-row triangular layout with inter-row distances of 4.5 m to allow vehicular access (1724 plants/ha) gave the best results. With this arrangement plants were in an alternate, triangular arrangement along a row and a spacing of 1.5 m between plants at the points of each triangle and between each block of triangles.

Phase relations in the system Ta-Rh-O and thermodynamic properties of TaRhO4

Phase relations in the system Ta-Rh-O were determined by analysis of quenched samples corresponding to thirteen compositions inside the ternary triangle after equilibration at 1273 K. All the Ta-Rh alloys were found to be in equilibrium with Ta2O5. Only one ternary oxide TaRhO4 was detected. Based on phase relations in the ternary system, a solid-state electrochemical cell, incorporating calcia-stabilized zirconia as the electrolyte, was designed to measure the standard Gibbs energy of formation (Delta G degrees, J mol(-1)) of TaRhO4 in the temperature range from 900 to 1300 K. For the reaction, 1/2 beta-Ta2O5 + 1/2 Rh2O3(ortho) -> TaRhO4 Delta G degrees = -42993 + 5.676T (+/- 85) The calculated decomposition temperatures of TaRhO4 are 1644 +/- 5K in pure O-2 and 1543 +/- 5K in air at a total pressure p(o) = 0.1 MPa. Thermodynamic properties of TaRhO4 at 298.15K have been evaluated from the results. The limited experimental thermodynamic data for Rh-rich alloys available in the literature are in fair accord with Miedema's model. The Gibbs energies of formation of the different phases in the binary system Ta-Rh were estimated based on these inputs, consistent with the binary phase diagram. Based on the thermodynamic information on the stability of various phases, an oxygen potential diagram for the system Ta-Rh-O at 1273K was constructed. Also presented are temperature-composition diagrams for the ternary system at constant oxygen partial pressures (po(2)/p(o) = 0.212 and 10(-6)) calculated form the basic data.

Visual completion in an illusory figure

The visual systems of humans and animals represent physical reality in a modified way, depending on the specific demands that the species in question has for survival. The ability to perceive visual illusions is found in independently evolved visual systems, from honeybees to humans. In humans, the ability emerges early, at the age of four months. Thus the perception of illusion is likely to reflect visual processes of fundamental importance for object perception in natural vision. The experiments reported in this thesis employed various modifications of the Kanizsa triangle, a drawn configuration composed of three black disks with missing sectors on a white background. The sectors appear to form the tips of a triangle. The visual system completes the physically empty area between the disks, generally called inducers, with giving the perception of an illusory triangle. The illusory triangle consists of an illusory surface bounded by illusory contours; the triangle appears brighter than and to lie above the background. If the sectors are coloured, the colour fills the illusory area, a phenomenon known as neon colour spreading . We investigated spatial limitations on the perception of Kanizsa-type illusions and how other stimuli and viewing parameters affected these limitations. We also studied complex configurations thick, bent, mobile and chromatic inducers - to determine whether illusions combining several attributes can be perceived. The results suggest that the visual system is highly effective in completing a percept. The perception of an illusory figure is spatially scale invariant when perceived at threshold. The processing time and the number of fixations modify the percept, making the perception of the illusion more probable in various viewing conditions. Furthermore, the fact that the illusion can be perceived when only one inducer is physically present at any given moment indicates the potential of single inducers. Apparently, modelling illusory figure perception will require a combination of low-level, local processes and higher-level integrative processes. Our studies with stimuli combining several attributes relevant to object perception demonstrate that the perception of an illusory figure is flexible and is maintained also when it contains colour and volume and when shown in movement. All in all, the results confirm the assumed importance of the visual processes related with the perception of illusory figures in everyday viewing. This is indicated by the variety of inducer modifications that can be made without destroying the percept. Furthermore, the illusion can acquire additional attributes from such modifications. Due to individual differences in the perception of illusory figures, universal values for absolute performance are not always meaningful, but stable trends and general relations do exist.

Noviisiopettajana peruskoulussa : Aloittelevien opettajien autenttisia kokemuksia ensimmäisestä opettajavuodesta

As a Novice Teacher at Comprehensive School: The authentic experiences of the beginning teachers during their first year of teaching The aim of this study is to explicate the novice year of teaching in the light of teachers´ authentic experiences. The subject of this investigation is the teachers´ subjective world of experience during their first academic year of teaching and the sharing of these experiences in collaborative consulting meetings. The themes discussed in the meetings were introduced into the collaborative group by the novice teachers themselves, and the progress of discussion was con-trolled by them. The research data was gathered in a consultative working group where the way a novice teacher starts to interpret, analyze and identify his/her own complex and dynamic teaching situations was observed. The research data gathered in this way illuminates novice teachers´ world of experience and mental picture as well as the unconscious sides of school life. In a theoretical frame of reference, the work of a teacher is identified, according to systemic scientific thought, as a dynamic triangle in which the basic elements are the personality of the teacher, the role of the teacher and the school as an organization. These basic elements form a whole within which the teacher works. The dynamics of this triangle in a teacher’s work are brought to light through the study of the phenomena of groups and group dynamics since a teacher works either as a member of a group (working community), as a leader of a group (teaching situations) or in a network (parent – teacher cooperation). Therefore, tension and force are always present in teaching work. The main research problem was to explain how a novice teacher experiences his/her first working year as a teacher. The participants (n=5) were teaching at five different comprehensive schools in the city of Helsinki. This was their first long-term post as a teacher. The research data consists of seven collaborative consulting meetings, as well as recordings and transcripts of the meetings. A classificatory framework was developed for data analysis which enabled a sys-tematic qualitative content analysis based on theory and material. In addition to the consulting meetings, the teachers were interviewed at the beginning and at the end of the process of collecting the research material. The interviews were used to interpret the meanings of the content analysis based on raw data. The findings show that there is a gap between teacher education and the reality of school life, which causes difficulties for a novice teacher during his/her first teaching year. The gap is rather a global educational problem than a national one, and therefore it is independent of cultural factors. Novice teachers desire a well-structured theory of teacher education and a clear programme where the themes and content delve deeper and deeper into the subject matter during the study years. According to the novice teachers, teacher education frequently consists of sporadic and unconnected study and class situations. An individual content weakness of teacher education is the lack of insufficient initiation into evaluation processes. The novice teachers suggest that a student must be provided good-quality and competent guidance during the study years and during his or her induction. There should be a well-organized, structured and systematic induction program for novice teachers. The induction program should be overseen by an organization so that the requirements of a qualified induction can be met. The findings show that the novice teachers find the first year of teaching at comprehensive school emotionally loaded. The teachers experienced teaching as difficult work and found the workload heavy. Nevertheless, they enjoyed their job because, as they said, there were more pleasant than unpleasant things in their school day. Their main feeling at school was the joy of success in teaching. The novice teachers felt satisfaction with their pupils. The teachers experienced the more serious feelings of anger and disgust when serious violence took place. The most difficult situations arose from teaching pupils who had mental health problems. The toughest thing in the teacher´s work was teaching groups that are too heterogeneous. The most awkward problems in group dynamics happened when new immigrants, who spoke only their own languages, were integrated into the groups in the middle of the school year. Teachers wanted to help children who needed special help with learning but restated at the same time that the groups being taught shouldn’t be too heterogeneous. The teachers wished for help from school assistants so that they could personally concentrate more on teaching. Not all the parents took care of their children according to the comprehensive school law. The teachers found it hard to build a confidential relationship between home and school. In this study, novice teachers found it hard to join the teaching staff at school. Some of the teachers on staff were very strong and impulsive, reacting loudly and emotionally. These teachers provoked disagreement, conflicts, power struggles and competition among the other teachers. Although the novice teachers of the study were all qualified teachers, three of them were not interested in a permanent teaching job. For these teachers teaching at a primary school was just a project, a short period in their working life. They will remain in the teaching profession as long as they are learning new things and enjoying their teaching job. This study is an independent part of the research project on Interplay – Connecting Academic Teacher Education and Work, undertaken by the Department of Applied Sciences of Education at the University of Helsinki. Key words: novice teacher, emotions, groups and group dynamics, authority, co-operation between home and school, teacher community, leadership at school, induction, consulting