Development of a prototype for measuring plantar forces

Studies on the distribution of plantar pressure between the sole of the foot and the ground were developed before the 19th century. Currently, the most often employed plantar pressure measurement systems are Pedar® and FScan®, which have restrictions such as operational difficulty and high cost. In the present study, a device was constructed from two pressure plates capable of measuring plantar forces in discreet areas of the feet at a low cost, using strain-gages attached to sixteen strategic points of the mechanical elements. Sixteen prismatic beams were soldered to each frame, for which the free extremity of each beam represented a specific point of the foot. Two strain gauges were attached to each beam - one near the upper fixed extremity and the other near the lower fixed extremity. Using a Wheatstone bridge electric circuit, the gauges were used to measure the force acting on the extremity of the beam. Precision and accuracy of the prototype was about 10%. In some measurements, accuracy was 2%. The low precision and accuracy were mainly due to the restrictions of the available equipment, which only permitted four measurements at a time. Thus, it was necessary for participants to stand on the plates four separate times, which signified possible changes in the position of the feet on the pressure plates. Despite some limitations, the aim was achieved. The prototype has been used in some studies and represents a contribution to biomechanics, demonstrating the viability of using strain gauges.

Desenvolvimento de um circuito eletrônico experimental de anemômetro de fio quente

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo e desenvolvimento de um protótipo para redução da interferência de modo comum usando balanceamento dinâmico de impedância aplicado em biosensores e sensores eletroresistivos

A interferência eletromagnética causada pela linha de energia elétrica afeta negativamente os sinais de instrumentos eletrônicos, especialmente aqueles com baixos níveis de amplitude. Este tipo de interferência é conhecida como interferência de modo comum. Existem muitos métodos e arquiteturas utilizadas para minimizar a influência deste fenômeno de interferência em instrumentos eletrônicos, o mais comum dos quais é a utilização de filtros rejeita banda. Este trabalho apresenta: a análise, desenvolvimento, protótipo e teste de uma nova arquitetura de filtro com característica reconfigurável para instrumentos biomédicos e medição de dados de fluxo em fluido de alta complexidade, com objetivo de reduzir a interferência de modo comum e preservar as componentes do sinal útil na mesma faixa de frequência do ruído, utilizando a técnica de equilíbrio dinâmico de impedância. Além disso, este trabalho pode ser usado em qualquer sistema de medição que também sofra interferência na frequência da linha de alimentação (50/60 Hz, no Brasil e na França, 60 Hz nos Estados Unidos da América). Os blocos de circuitos foram modelados matematicamente e a função de transferência global do circuito fechado foi gerada. Em seguida, o projeto foi descrito e simulado na língua VHDL_AMS e também em um software de simulação eletrônica, usando blocos de componentes discretos, com e sem realimentação. Após análise teórica dos resultados da simulação, um circuito protótipo foi construído e testado usando como entrada um sinal obtido a partir de eletrodos de ECG e Eletrodos Eletroresistivos. Os resultados experimentais do circuito condizem com os da simulação: uma redução de ruído de 98,7% foi obtida em simulações utilizando um sinal sinusoidal, e uma redução de 92% foi realizada utilizando eletrodos de ECG em testes experimentais. Os mesmos testes em eletrodos Eletroresistivos, obtendo o maior valor de 80,3% de redução (durante análise de 3 casos). Em ambos os casos, o sinal útil foi preservado. O método e a sua arquitetura pode ser aplicado para atenuar as interferências que ocorrem na mesma banda de frequência das componentes do sinal útil, preservando ao mesmo tempo estes sinais.

Student's academic efficacy or Inefficacy? an example on how to evaluate the psychometric properties of a measuring instrument and evaluate the effects of item wording

This study evaluated the effect of item inversion on the construct validity and reliability of psychometric scales and proposed a theoretical framework for the evaluation of the psychometric properties of data gathered with psychometric instruments. To this propose, we used the Maslach Burnout Inventory, which is the most used psychometric inventory to measure burnout in different professional context (Students, Teachers, Police, Doctors, Nurses, etc…). The version of the MBI used was the MBI-Student Survey (MBI-SS). This inventory is composed of three key dimensions: Exhaustion, Cynicism and Professional Efficacy. The two first dimensions—which have positive formulated items—are moderate to strong positive correlated, and show moderate to strong negative correlations with the 3rd dimension—which has negative formulated items. We tested the hypothesis that, in college students, formulating the 3rd dimension of burnout as Inefficacy (reverting the negatively worded items in the Efficacy dimension) improves the correlation of the 3rd dimension with the other two dimensions, improves its internal consistency, and the overall MBI-SS’ construct validity and reliability. Confirmatory factor analysis results, estimated by Maximum Likelihood, revealed adequate factorial fit for both forms of the MBI-SS (with Efficacy) vs. the MBI-SSi (with Inefficacy). Also both forms showed adequate convergent and discriminant related validity. However, reliability and convergent validity were higher for the MBI-SSi. There were also stronger (positive) correlations between the 3 factors in MBI-SSi than the ones observed in MBI-SS. Results show that positively rewording of the 3rd dimension of the MBI-SS improves its validity and reliability. We therefore propose that the 3rd dimension of the MBI-SS should be named Professional Inefficacy and its items should be positively worded.

Experimental investigations on the first Townsend coefficient in pure isobutane

In this work we present results of the first Townsend coefficient (alpha) in pure isobutane by measuring the current growth as a function of the electric field strength in a pulsed irradiation regime. A Resistive Plate Chamber (RPC)-like configuration was used. To validate this method, as well as to crosscheck the experimental apparatus, measurements of the alpha parameter were firstly carried out with pure nitrogen and the results compared to the accurate data available in the literature. The data obtained with isobutane in a field range from 145 Td up to 200 Td were well-matched to those calculated with Magboltz versions 2.7.1 and 2.8.6. The experimental consistency of these results with other published data in the range of 550-1300 Td was very good, as demonstrated by the use of the Korff parameterization. (C) 2012 Elsevier B.V. All rights reserved.

Measuring Information Quality on the Internet - a User Perspective

Research into information quality on the internet, in particular on websites, has become increasingly important in recent years. In this paper a research project is described in which a measurement instrument was developed that enables the information quality of websites to be determined and analyzed from the customer perspective. The measurement instrument was developed in several stages and on the basis of a methodical-theoretical approach. In a first step, previous research results and measurement instruments were systematically analyzed. In a second step, these results were adjusted and supplemented on the basis of a qualitative study. A quantitative test of the measurement instrument is planned.

Idiographic Self-Monitoring Instruments to Empower Client Participation and Evaluate Outcome in Intensive Family Preservation Services

Intensive Family Preservation Services seek to reflect the values of focusing on client strengths and viewing clients as colleagues. To promote those values, Intensive Family Preservation Programs should include a systematic form of client self monitoring in their packages of outcome measures. This paper presents a model of idiographic self-monitoring used in time series, single system research design developed for Family Partners, a family preservation program of the School for Contemporary Education in Annandale, Virginia. The evaluation model provides a means of empowering client families to utilize their strengths and promote their status as colleague in determining their own goals, participating in the change process, and measuring their own progress.

Measuring Consumer Satisfaction in Family Preservation Services: Identifying Instrument Domains

Measuring consumer satisfaction in the social services has become an important source of feedback for the improvement of service delivery. Consumer satisfaction has recently been incorporated into family preservation evaluation. This article reviews instruments used to measure consumer satisfaction in family preservation services and other related areas. Trends in current practice are examined and instrument dimensions are identified. Finally, some recommendations are made about the application of consumer satisfaction measurement in family preservation services.

Measuring localized viscoelasticity of the vitreous body using intraocular microprobes.

Vitrectomy is a standard ophthalmic procedure to remove the vitreous body from the eye. The biomechanics of the vitreous affects its duration (by changing the removal rate) and the mechanical forces transmitted via the vitreous on the surrounding tissues during the procedure. Biomechanical characterization of the vitreous is essential for optimizing the design and control of instruments that operate within the vitreous for improved precision, safety, and efficacy. The measurements are carried out using a magnetic microprobe inserted into the vitreous, a method known as magnetic microrheology. The location of the probe is tracked by a microscope/camera while magnetic forces are exerted wirelessly by applied magnetic fields. In this work, in vitro artificial vitreous, ex vivo human vitreous and ex vivo porcine vitreous were characterized. In addition, in vivo rabbit measurements were performed using a suturelessly injected probe. Measurements indicate that viscoelasticity parameters of the ex vivo human vitreous are an order of magnitude different from those of the ex vivo porcine vitreous. The in vivo intra-operative measurements show typical viscoelastic behavior of the vitreous with a lower compliance than the ex vivo measurements. The results of the magnetic microrheology measurements were validated with those obtained by a standard atomic force microscopy (AFM) method and in vitro artificial vitreous. This method allows minimally-invasive characterization of localized mechanical properties of the vitreous in vitro, ex vivo, and in vivo. A better understanding of the characteristics of the vitreous can lead to improvements in treatments concerning vitreal manipulation such as vitrectomy.

Measuring Spatial Presence: Introducing and Validating the Pictorial Presence SAM

The aim of the present study was to develop a pictorial presence scale using selfassessment- manikins (SAM). The instrument assesses presence sub-dimensions (selflocation and possible actions) as well as presence determinants (attention allocation, spatial situation model, higher cognitive involvement, and suspension of disbelief). To qualitatively validate the scale, think-aloud protocols and interviews (n = 12) were conducted. The results reveal that the SAM items are quickly filled out as well as easily, intuitively, and unambiguously understood. Furthermore, the instrument’s validity and sensitivity was quantitatively examined in a two-factorial design (n = 317). Factors were medium (written story, audio book, video, and computer game) and distraction (non-distraction vs. distraction). Factor analyses reveal that the SAM presence dimensions and determinants closely correspond to those of the MEC Spatial Presence Questionnaire, which was used as a comparison measure. The findings of the qualitative and quantitative validation procedures show that the Pictorial Presence SAM successfully assesses spatial presence. In contrast to the verbal questionnaire data (MEC), the significant distraction effect suggests that the new scale is even more sensitive. This points out that the scale can be a useful alternative to existing verbal presence selfreport measures.

Measuring health state preferences for hemophilia: Development of a disease-specific utility instrument

Research has shown that disease-specific health related quality of life (HRQoL) instruments are more responsive than generic instruments to particular disease conditions. However, only a few studies have used disease-specific instruments to measure HRQoL in hemophilia. The goal of this project was to develop a disease-specific utility instrument that measures patient preferences for various hemophilia health states. The visual analog scale (VAS), a ranking method, and the standard gamble (SG), a choice-based method incorporating risk, were used to measure patient preferences. Study participants (n = 128) were recruited from the UT/Gulf States Hemophilia and Thrombophilia Center and stratified by age: 0–18 years and 19+. ^ Test retest reliability was demonstrated for both VAS and SG instruments: overall within-subject correlation coefficients were 0.91 and 0.79, respectively. Results showed statistically significant differences in responses between pediatric and adult participants when using the SG (p = .045). However, no significant differences were shown between these groups when using the VAS (p = .636). When responses to VAS and SG instruments were compared, statistically significant differences in both pediatric (p < .0001) and adult (p < .0001) groups were observed. Data from this study also demonstrated that persons with hemophilia with varying severity of disease, as well as those who were HIV infected, were able to evaluate a range of health states for hemophilia. This has important implications for the study of quality of life in hemophilia and the development of disease-specific HRQoL instruments. ^ The utility measures obtained from this study can be applied in economic evaluations that analyze the cost/utility of alternative hemophilia treatments. Results derived from the SG indicate that age can influence patients' preferences regarding their state of health. This may have implications for considering treatment options based on the mean age of the population under consideration. Although both instruments independently demonstrated reliability and validity, results indicate that the two measures may not be interchangeable. ^

Illustrated Catalogue of Standard Surgical Instruments and Allied Lines

Section "A": Dissecting and Post-Mortem Instruments Diagnostic Instruments and Apparatus Microscopes and Microscopic Accessories Laboratory Apparatus and Glass Ware Apparatus for Blood and Urine Analysis Apparatus for Phlebotomy, Cupping and Leeching Apparatus for Infusion and Transfusion Syringes for Aspiration and Injection Osteological Preparations Section "B": Anaesthetic, General Operating, Osteotomy, Trepanning, Bullet, Pocket Case, Cautery, Ligatures, Sutures, Dressings, Etc. Section "B" continued Section "C": Eye, Ear, Nasal, Dermal, Oral, Tonsil, Tracheal, Laryngeal,Esophageal, Stomach, Intestinal, Gall Bladder Section "C": continued Section "D": Rectal, Phimosis, Prostatic, Vesical, Urethral, Ureteral, Instruments Section "E": Gynecic, Hysterectomy, Obstetrical, Instrument Satchels, Medicine Cases Section "F": Electric Cautery Transformers, Electro-Cautery Burners and Accessories, Electric Current Controllers, Electro-Diagnostic Outfits, Electrolysis Instruments Electro-Therapeutic Lamps, Faradic Batteries, Galvanic Batteries Section "G": Office Furniture, Office Sterilizing Apparatus, Hospital Supplies, Surgical Rubber Goods, Sick Room Utensils, Invalid Rolling Chairs, Invalid Supplies Section "H": Artificial Limbs, Deformity Apparatus, Fracture Apparatus, Splints, Splint Material, Elastic Hosiery, Abdominal Supporters, Crutches, Trusses, Suspensories, Etc. Index

Accessibility instruments for planning practice: bridging the gap between academic research and decision-making.

One of the core objectives of urban planning practice is to provide spatial equity in terms of opportunities and use of public space and facilities. Accessibility is the element that serves this purpose as a concept linking the reciprocal relationship between transport and land use, thus shaping individual potential mobility to reach the desired destinations. Accessibility concepts are increasingly acknowledged as fundamental to understand the functioning of cities and urban regions. Indeed, by introducing them in planning practice, better solutions can be achieved in terms of spatial equity. The COST Action TU1002 "Accessibility instruments for planning practice" was specifically designed to address the gap between scientific research in measuring and modelling accessibility, and the current use of indicators of accessibility in urban planning practice. This paper shows the full process of introducing an easily understandable measure of accessibility to planning practitioners in Madrid, which is one of the case studies of the above-mentioned COST action. Changes in accessibility after the opening of a new metro line using contour measures were analyzed and then presented to a selection of urban planners and practitioners in Madrid as part of a workshop to evaluate the usefulness of this tool for planning practice. Isochrone maps were confirmed as an effective tool, as their utility can be supplemented by other indicators, and being GIS-based, it can be easily computed (when compared with transport models) and integrated with other datasets.

Capacitance cytometry: Measuring biological cells one by one

Measuring the DNA content of eukaryotic cells is a fundamental task in biology and medicine. We have observed a linear relationship between the DNA content of eukaryotic cells and the change in capacitance that is evoked by the passage of individual cells across a 1-kHz electric field. This relationship is species-independent; consequently, we have developed a microfluidic technique—“capacitance cytometry”—that can be used to quantify the DNA content of single eukaryotic cells and to analyze the cell-cycle kinetics of populations of cells. Comparisons with standard flow cytometry demonstrate the sensitivity of this new technique.

Measuring the effective focal length and shape factor of a thick lens using a microscope

The optical power of a thick spherical lens and its Coddington shape factor are essential magnitudes that characterize its image quality. Here, we propose an experimental procedure and apparatus that allow accurate determination of those magnitudes for any spherical lens from geometrical measurements. The performance of the technique and the used instruments are simple since it only requires a microscope and an optical mouse. The propose overcomes the drawbacks of other devices that need of the refractive index or may damage the lens surfaces, like spherometers, and provides similar results to those from commercial lensmeters.