Monitoramento das perdas de solo da sub-bacia Ribeirão das Bicas - Botucatu/SP, utilizando fotogrametria digital

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Eliminação de ruído impulsivo em imagens coloridas usando um filtro mediano seletivo e retoque digital

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Digital soil mapping: evaluation of sampling systems for soil surveys and refinement of soil maps at lower cost using legacy data

In soil surveys, several sampling systems can be used to define the most representative sites for sample collection and description of soil profiles. In recent years, the conditioned Latin hypercube sampling system has gained prominence for soil surveys. In Brazil, most of the soil maps are at small scales and in paper format, which hinders their refinement. The objectives of this work include: (i) to compare two sampling systems by conditioned Latin hypercube to map soil classes and soil properties; (II) to retrieve information from a detailed scale soil map of a pilot watershed for its refinement, comparing two data mining tools, and validation of the new soil map; and (III) to create and validate a soil map of a much larger and similar area from the extrapolation of information extracted from the existing soil map. Two sampling systems were created by conditioned Latin hypercube and by the cost-constrained conditioned Latin hypercube. At each prospection place, soil classification and measurement of the A horizon thickness were performed. Maps were generated and validated for each sampling system, comparing the efficiency of these methods. The conditioned Latin hypercube captured greater variability of soils and properties than the cost-constrained conditioned Latin hypercube, despite the former provided greater difficulty in field work. The conditioned Latin hypercube can capture greater soil variability and the cost-constrained conditioned Latin hypercube presents great potential for use in soil surveys, especially in areas of difficult access. From an existing detailed scale soil map of a pilot watershed, topographical information for each soil class was extracted from a Digital Elevation Model and its derivatives, by two data mining tools. Maps were generated using each tool. The more accurate of these tools was used for extrapolation of soil information for a much larger and similar area and the generated map was validated. It was possible to retrieve the existing soil map information and apply it on a larger area containing similar soil forming factors, at much low financial cost. The KnowledgeMiner tool for data mining, and ArcSIE, used to create the soil map, presented better results and enabled the use of existing soil map to extract soil information and its application in similar larger areas at reduced costs, which is especially important in development countries with limited financial resources for such activities, such as Brazil.

Extração automática de contornos de telhados de edifícios em um modelo digital de elevação, utilizando inferência Bayesiana e campos aleatórios de Markov

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação dos atributos do solo sob diferentes ocupações na microbacia hidrográfica do córrego da Fazenda Glória Em Taquaritinga (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Morfometria de compartimentos hidrológicos e qualidade hídrica do município de Batatais-SP

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Mapeamento dos parâmetros florísticos e estruturais de floresta de mangue com dados LIDAR e SRTM

Este estudo apresenta a estimativa dos parâmetros florísticos e estruturais (determinação da espécie, altura, diâmetro a altura do Peito - DAP e biomassa) do mangue a partir de informações da superfície adquiridas remotamente com os sensores Laser Detection and Range (LIDAR), Shuttle Radar Topography Mission (SRTM) e ortofotos na Ilha dos Guarás, conjunto de arquipélagos localizado a 30 km da desembocadura do rio amazonas. Para esse trabalho foram utilizadas informações do SRTM, LIDAR e fotografias aéreas processadas e ortorretificadas durante dois sobrevôos realizados entre o mês de julho e agosto de 2011. Com a ortofoto foi feito o mapa do reconhecimento de unidades geobotânicas que delimitou apenas a classe mangue. Em seguida, foi realizada a correção da altura elipsoidal para a altura ortométrica, onde a nuvem de pontos foi interpolada pelo método vizinho mais próximo, gerando Modelo Digital de Elevação (MDE) LIDAR (full points) com RMSE de 0,88 cm e por meio de uma linguagem macro foi estatisticamente separadas as informações do último pulso da superfície, conhecido também por ground points. Em seguida, os dados foram interpolados pelo método de krigeagem que gerou o valor de Modelo Digital de Superfície (MDS), o qual foi subtraído do MDE. Com base no Modelo Digital de Vegetação (MDV) foram definidos os sítios de coleta e selecionadas as árvores ascendentes, intermediárias e emergentes, porte no qual foi medido o DAP e altura. No total foram coletadas 212 amostras individuais de mangue e para assegurar o nível de acurácia do conjunto coletado, foi realizado o cálculo de RMSE entre as alturas do LIDAR e Campo, que resultou em RMSE= 1,10 m. Os modelos escolhidos para calibração LIDAR e altura de campo foi do tipo linear, com R² = 91% e RMSE= 0,98 cm e para calibração da DAP e altura de campo foi escolhido o modelo Logarítmico R² = 74,1%. Nos resultados da calibração do SRTM o modelo logarítmico também foi o mais adequado para a relação entre altura média e SRTM com R² = 91% e RMSE de 2,2 m e DAP Médio e SRTM, com R² = 88% e RMSE 2,2 cm. A partir de um inventário foi realizada a estimativa da biomassa por espécie por meio das equações alométricas de Fromard e posteriormente os resultados foram espacializados em forma de mapas com alto nível de detalhamento oriundo das informações LIDAR e SRTM corrigido e ortofotos.

Interaction between GIS and hydrologic model: a preliminary approach using ArcHydro Framework Data Model

In different regions of Brazil, population growth and economic development can degrade water quality, compromising watershed health and human supply. Because of its ability to combine spatial and temporal data in the same environment and to create water resources management (WRM) models, the Geographical Information System (GIS) is a powerful tool for managing water resources, preventing floods and estimating water supply. This paper discusses the integration between GIS and hydrological models and presents a case study relating to the upper section of the Paraíba do Sul Basin (Sao Paulo State portion), situated in the Southeast of Brazil. The case study presented in this paper has a database suitable for the basin's dimensions, including digitized topographic maps at a 50,000 scale. From an ArcGIS®/ArcHydro Framework Data Model, a geometric network was created to produce different raster products. This first grid derived from the digital elevation model grid (DEM) is the flow direction map followed by flow accumulation, stream and catchment maps. The next steps in this research are to include the different multipurpose reservoirs situated along the Paraíba do Sul River and to incorporate rainfall time series data in ArcHydro to build a hydrologic data model within a GIS environment in order to produce a comprehensive spatial-temporal model.

Topobatimetria e geração de modelo digital de terreno no monitoramento da dinâmica fluvial do ribeirão Guaratinguetá

This research was developed with the goal of creating a Digital Terrain Model(DTM),through a topo-bathymetric data gathering that allows the monitoring of the fluvial dynamics of part of Guaratinguetá’s creek, where preliminary evaluations identified, in a short period of time, intense changes on its riverbed. Modern topography technics and tools were used for the data gathering, such as the use of geodesic GPS and Total Station. The DTM was primal for the project e execution of the desilting works of the researched part of the creek, being used to estimate the amount of soil to be moved. The comparison between the digital terrain models generated before and after the desilting has showed the efficiency and aplicability of this technique in the monitoring of the fluvial dynamics changes of Guaratinguetá’s creek

Aplicação de técnicas de processamento e análise de imagens para detecção de edificações e vegetação a partir de dados LiDAR

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A biophysical model of Sugarcane growth

Scientists predict that global agricultural lands will expand over the next few decades due to increasing demands for food production and an exponential increase in crop-based biofuel production. These changes in land use will greatly impact biogeochemical and biogeophysical cycles across the globe. It is therefore important to develop models that can accurately simulate the interactions between the atmosphere and important crops. In this study, we develop and validate a new process-based sugarcane model (included as a module within the Agro-IBIS dynamic agro-ecosystem model) which can be applied at multiple spatial scales. At site level, the model systematically under/overestimated the daily sensible/latent heat flux (by -10.5% and 14.8%, H and E, respectively) when compared against the micrometeorological observations from southeast Brazil. The model underestimated ET (relative bias between -10.1% and 12.5%) when compared against an agro-meteorological field experiment from northeast Australia. At the regional level, the model accurately simulated average yield for the four largest mesoregions (clusters of municipalities) in the state of Sao Paulo, Brazil, over a period of 16 years, with a yield relative bias of -0.68% to 1.08%. Finally, the simulated annual average sugarcane yield over 31 years for the state of Louisiana (US) had a low relative bias (-2.67%), but exhibited a lower interannual variability than the observed yields.

PLANEJAMENTO, OBJETIVOS E DEFINIÇÃO DE PADRÕES NA DESCRIÇÃO DOS METADADOS DA COLEÇÃO DA BIBLIOTECA BRASILIANA DIGITAL

O projeto „Por uma Biblioteca Brasiliana Digital‟ é parte integrante do projeto BRASILIANA USP, uma iniciativa da Reitoria da Universidade de São Paulo (USP), que tem por objetivo facultar para a pesquisa a maior Brasiliana custodiada por uma universidade, tornando-a disponível na internet. O trabalho que ora apresentamos é resultado da implantação de um modelo de biblioteca digital que atende aos padrões de interoperabilidade e compartilhamento de informações. Especificamente, apresentaremos os procedimentos e processos de descrição de conteúdos das diversas tipologias documentais (livros, periódicos, mapas, gravuras etc.) e formatos digitais (pdf, mp3, jpeg entre outros), bem como a consolidação de um esquema de metadados gerenciais e administrativos que contemplam as informações e dados produzidos pelo Projeto da Brasiliana Digital.

The impact of different surface parameterizations and vertical resolutions on the simulation of seabreeze episodes at the island of Fuerteventura

[EN] On 8-10 April 2007, several episodes of intense sea-breeze fronts were registered at the island of Fuerteventura (Canary Islands). The sea-breeze circulation was primary driven by daytime heating contrasts between land and the Atlantic Ocean during a period of weak trade winds. Numerical simulations of these events were carried out using the 3.1.1 version of the Weather Research and Forecasting (WRF) Model. Two different domains with 6.6-km and 2.2-km horizontal grid spacing and two sets with 27 and 51 vertical sigma levels were defined. The simulation was performed using two-way interactive nesting between the first and the second domain, using different land surface model parameterizations (Thermal diffusion, Noah LSM and RUC) for comparison. Initial conditions were provided by the NCAR Dataset analysis from April 2007, which were improved using surface and upper-air observations. The poster is focused on the 9 April episode.

Model of vessels for the 3D reconstruction

[EN] In this paper, we present a vascular tree model made with synthetic materials and which allows us to obtain images to make a 3D reconstruction. In order to create this model, we have used PVC tubes of several diameters and lengths that will let us evaluate the accuracy of our 3D reconstruction. We have made the 3D reconstruction from a series of images that we have from our model and after we have calibrated the camera. In order to calibrate it we have used a corner detector. Also we have used Optical Flow techniques to follow the points through the images going and going back. Once we have the set of images where we have located a point, we have made the 3D reconstruction choosing by chance a couple of images and we have calculated the projection error. After several repetitions, we have found the best 3D location for the point.

A GIS based model for solving the planar Huff problem considering different demand distributions and forbidden regions

[EN] In this paper, we have used Geographical Information Systems (GIS) to solve the planar Huff problem considering different demand distributions and forbidden regions. Most of the papers connected with the competitive location problems consider that the demand is aggregated in a finite set of points. In other few cases, the models suppose that the demand is distributed along the feasible region according to a functional form, mainly a uniform distribution. In this case, in addition to the discrete and uniform demand distributions we have considered that the demand is represented by a population surface model, that is, a raster map where each pixel has associated a value corresponding to the population living in the area that it covers...