Histological study of capuchin monkey (Cebus apella) ovarian follicles

The present study aimed to obtain quanti-qualitative data about the follicular ovarian population in Cebus apella females. Seven ovaries were obtained from 4 C. apella adult females. The ovaries were subjected to light microscopy. The number of preantral and antral follicles for each ovary was estimated using the Fractionator method. The preantral follicles were classified into primordial, transitional, primary and secondary follicles. Antral follicles were those that presented an antral cavity. All counted follicles were classified as normal or degenerated. The diameter of the follicles, oocytes and their nuclei were determined to accompany the follicular development. All results were represented as mean ± SE. The number of preantral follicles was 56,938 ± 21,888 and 49,133 ± 26,896 for the right and left ovaries, respectively. The percentage of normal follicles was 80 ± 4.95%. The follicular diameter ranged from 22 ± 0.5 µm to 61.2 ± 4.0 µm. Regarding the antral follicles, the number of normal and degenerate follicles per ovary were 60.0 ± 19.0 and 3 ± 1.8 follicles, respectively. The antral follicular diameter was 514.4 + 56.6 µm. In conclusion, the information obtained in this study can be used as a parameter for subsequent in vivo or in vitro studies about folliculogenesis in non-human neotropical primates of the C. apella species.

Influence of design parameters on the mechanical behavior and porosity of braided fibrous stents

In spite of all innovations in stent design, commonly used metallic stents present several problems such as corrosion, infection and restenosis, leading to health complications or even death of patients. In this context, the present paper reports a systematic investigation on designing and development of 100% fiber based stents, which can eliminate or minimize the problems with existing metallic stents. For this purpose, braided stents were produced by varying different materials, structural and process parameters such as mono-filament type and diameter, braiding angle and mandrel diameter. The influence of these design parameters on mechanical behavior as well as stent's porosity was thoroughly investigated, and suitable parameters were selected for developing a stentwith mechanical characteristics and porosity matching with the commercial stents. According to the experimental results, the best performance was achieved with a polyester stent designed with 0.27 mm monofilament diameter, braiding angle of 35° and mandrel diameter of 6 mm, providing similar properties to commercial Nitinol stents.

Antibacterial properties of fibrous stents coated with silver oxide nanocoatings

Stents are rigid and perforated tubular structures, which are inserted into blood vessels in order to prevent or inhibit the constriction of blood flow, restoring the normal blood flow, when blood vessels are clogged, being used in 70% of angioplasties. These medical devices assume great importance in the treatment of cardiovascular diseases (CVD) which are the leading cause of death worldwide. In the European Union CVD account for 40% of deaths and assume an estimated annual cost of 196 billion euros[1]. Stents must possess certain requirements, in order to, adequately, perform its function, such as biocompatibility (so that its use does not c ause damage on the health of its user), mechanical strength, radiopacity (so that it is easy to view), longitudinal flexibility, ease of handling, corrosion resistance and having high strength and high radial expansion ability to recover. Stents can be made of different materials, but metals, particularly stainless steel, are the most common. However, metallic stents present several dRawbacks such as corrosion and restenosis, leading to health complications for the patient, or even death. In order to minimize these disadvantages, new materials, like fibrous materials, have been used [2]. Monofilaments present high potential for stents development because, in addition to its biocompatibility, these materials allow the application of various surface treatments, such as antibacterial coatings. Furthermore, monofilament exhibit excellent mechanical properties, like greater stiffness and good results when subjected to compression, tensile and bending forces, since these forces will be directly supported by the monofilament [3]. To minimize the reaction of the human body and Limit the adhesion of microorganisms to the stent surface, some coatings have been developed, including the use of novel metals with antimicrobial properties, like silver. The main objective of this study was the development of fibrous stents, incorporation of silver oxide nanocoating. For the development of the stent, polyester monofilaments with 0.27mm of diameter were used in braiding technology, with a mandrel diameter of 6mm and a braiding angle of 35⁰. The mechanical behaviour of the stent were evaluated by mechanical testing under longitudinal and radial compression, bending. The results of compressive strength tests are according with value from literature: 1.13 to 2.9 N for radial compression and 0. 16-5.28N to longitudinal compression. From literature is also possible to verify that stents must present 75% of unchanged diameter during the bending test and must possess a porosity between 70% and 80% [4]. The produced polyester stent presents values of 1.29N for radial compression, 0.23N for longitudinal compression, 80% of porosity and 85.5% of unchanged diameter, during bending tests. For the antibacterial functionalization, silver oxide nanocoatings were prepared, through reactive magnetron g, with an Ag target in an Ar +O2 atmosphere. In order to evaluate the nanostructure and morphology of the coatings, d ifferent technique s like X-ray diffraction (XRD), scanning electron microscopy (SEM) and and X- ray photoelectron spectroscopy (XPS were used. From the analyses of XRD it is possible to verify that the peaks corresponds to planes of Ag2 O and MATERIAIS 2015 Porto, 21-23 June, 2015 characterize a cubic phase. The presence of Ag2 O is corroborated by XPS spectrum, where it is possible to observe silver, not only, in oxide state, but a lso in mettalic state, and it is possible to verify the presence of silver clusters, confirmed by SEM analysis. Films’ roughness and topography, parameters influencing the wettability of the surface and microorganism adhesion, were measured by Atomic Force Microscopy (AFM), and it was observed that the roughness is very low (under 10 nm). Coatings’ hydrophobicity and surface tension parameters were determined by contact angle measurement, and it was verified the hydrophobic behavior of the coatings. For antibacterial tests were used Staphylococcus epidermidis strain (IE186) and Staphylococcus aureus(ATCC 6538), and halo inhibition zone tests were realized. Ag+release rates were studied by means of inductively coupled plasma mass spectrometry (ICP -MS). The obtained results suggest that silver oxide coatings do not modify significantly surface properties of the substrate, like hydrophobicity and roughness, and present antimicrobial properties for both bacteria used.

First record of Trichodina heterodentata (Ciliophora: Trichodinidae) from Arapaima gigas cultivated in Peru

This study characterized morphologically Trichodina heterodentata Duncan, 1977 from cultivated fingerlings of "pirarucu" Arapaima gigas in Peru. Body and gill smears were air-dried at room temperature, impregnated with silver nitrate and/or stained with gomori trichromic. Prevalence was 100%. Trichodina heterodentata was considered a medium-sized trichodinid with mean body diameter of 56.0+ 5.25 (47.3-76.0) μm, denticulate ring 28.21± 2.71 (20-34.7) μm, adhesive disc 45.7±3.8 (37.1-57.3) μm diameter and number of denticles of 20.7± 2.6 (12-24). The present study reports not only the first occurrence of T. heterodentata in Peru but also the first record of this trichodinid infesting A. gigas. Camparative tables of all reports of T. heterodentata are also presented.

Puberty in male collared peccary (Pecari tajacu) determined by quantitative analysis of spermatogenic cells

Biological studies are necessary for the management of wildlife in captivity, and knowledge of reproduction is one of the important features for increasing production. The objective of the research was to determine the age at which male collared peccaries reach puberty. Testicular samples of 15 animals, aged 7 to 16 months, distributed into five groups (G1, G2, G3, G4 and G5) were used. The testes showed considerably increased weight, length and width (p < 0.05) from G1 to G3, whereas, from this group onward, the development of this organ was slower. There was positive correlation (p < 0.001) between the following testicular parameters: weight and length (r = 0.97), weight and width (r = 0.88), length and width (r = 0.92). Regarding the diameter of seminiferous tubules, an increase was observed (p < 0.05) from G1 to G4. The total number of spermatogenic cells increased significantly (p < 0.05) until G3 and then it stabilized. There was also positive correlation between testis weight and tubular diameter (r = 0.99, p < 0.001), and testis weight and spermatogenic cells (r = 0.98, p < 0.001). The number of Sertoli cells decreased significantly (p < 0.05) from G1, when they were undifferentiated as support cells, to G5, when they occurred together with the complete line of spermatic cells. The results demonstrate that the reproductive development of peccaries can be classified into the following stages: impuberty (G1, 7-8 months); pre-pubertal (G2, 9-10 months); pubertal (G3, 11-12 months); post-pubertal 1 (G4, 13-14 months); and post-pubertal 2 (G5, 15-16 months). Based on the histological analyses, puberty in the male collared peccary was determined to occur between 11 and 12 months of age.

Reproductive biology of Ameerega trivittata (Anura: Dendrobatidae) in an area of terra firme forest in eastern Amazonia

The reproductive success of tropical amphibians is influenced by factors such as body size and the characteristics of breeding sites. Data on reproductive biology are important for the understanding of population dynamics and the maintenance of species. The objectives of the present study were to examine the abundance of Ameerega trivittata, analyze the use of microhabitats by calling males and the snout-vent length (SVL) of breeding males and females, the number of tadpoles carried by the males and mature oocytes in the females, as well as the relationship between the SVL of the female and both the number and mean size of the mature oocytes found in the ovaries. Three field trips were conducted between January and September, 2009. A total of 31 plots, with a mean area of 2.3 ha, were surveyed, resulting in records of 235 individuals, with a mean density of 3.26 individuals per hectare. Overall, 66.1% of the individuals sighted were located in the leaf litter, while 17.4% were perched on decaying tree trunks on the forest floor, 15.7% on the aerial roots of Cecropia trees, and 0.8% on lianas. Males were observed transporting a mean of 10.8 tadpoles on their backs. A significant correlation was found between the size of the females and the mean diameter of the oocytes. New data were collected on the size of oocytes and no pattern was found in the type of perches used by calling males of the different Ameerega species.

Aortic valve assessment. Anatomical study of 100 healthy human hearts

PURPOSE: To assess anatomical characteristics of the aortic valve, so that they may be useful in diagnostic situations and surgical treatment. METHODS: The study analyzed 100 healthy fixed human hearts; 84% of them obtained from males, 61% of them from Caucasian individuals. The ages of the individuals ranged from 9 to 86 years (mean 30±15.5 years). The characteristics assessed related to age, sex, and race were the following: number and height of the cusps, size of the lunulae, internal and external intercommissural distance, position of the coronary ostium in relation to the aortic valve, position of the ventricular septum in relation to the aortic valve, thickness of the cusps. RESULTS: All hearts assessed had a tricuspidal aortic valve. In regard to the height of the cusps and size of the lunula, the left coronary cusp was larger, followed by the right coronary cusp and the noncoronary cusp. The internal and external intercommissural distances had mean values of 24.6±5.7mm and 19.7±7mm, respectively. In regard to the position of the coronary ostia, in one heart two ostia emerged from the left coronary sinus, and in another, the ostium was supracommissural. The mean diameter of the aorta was 21.8±3.6mm, and there were no significant sexual or racial differences, but the diameter increased progressively with the increase in age. The thickness of the cusps did not show any significant difference in the 3 points assessed. CONCLUSION: The aortic valve annulus did not show a perfect circumference, with some variations in the measurements of the annulus, in the cusps and in the relation with the ventricular septum.

Use of tandem stents for treatment of helicoidal dissection of the right coronary artery

Coronary dissection occurs frequently and in several degrees during coronary angioplasty, which is one of the mechanisms for increasing the lumen diameter of a vessel. However the length of the dissection may affect the procedure, becoming the most frequent cause of total occlusion after coronary angioplasty. We report here a case of extensive dissection that occurred during the coronary angioplasty of a focused lesion, which we treated with two long stents.

Percutaneous closure of ductus arteriosus with the amplatzer prosthesis. The Brazilian experience

OBJECTIVE - To report the results of percutaneous occlusion of persistent ductus arteriosus with the Amplatzer prosthesis in 2 Brazilian cardiological centers. METHODS - From May 1998 to July 2000, 33 patients with clinical and laboratory diagnosis of persistent ductus arteriosus underwent attempts at percutaneous implantation of the Amplatzer prosthesis. The median age was 36 months (from 6 months to 38 years), and the median weight was 14kg (from 6 to 92kg). Sixteen patients (48.5%) were under 2 years of age at the time of the procedure. All patients were followed up with periodical clinical and echocardiographic evaluations to assess the presence and degree of residual shunt and possible complications, such as pseudocoarctation of the aorta and left pulmonary artery stenosis. RESULTS - The minimum diameter of the arterial ducts ranged from 2.5 to 7.0mm (mean of 4.0±1.0, median of 3.9). The rate of success for implantation of the prosthesis was 100%. Femoral pulse was lost in 1 patient. The echocardiogram revealed total closure prior to hospital discharge in 30 patients, and in the follow-up visit 3 months later in the 3 remaining patients. The mean follow-up duration was 6.4±3.4 months. All patients were clinically well, asymptomatic, and did not need medication. No patient had narrowing of the left pulmonary artery or of the aorta. No early or late embolic events occurred, nor did infectious endarteritis. A new hospital admission was not required for any patient. CONCLUSION - The Amplatzer prosthesis for persistent ductus arteriosus is safe and highly effective for occlusion of ductus arteriosus of varied diameters, including large ones in small symptomatic infants.

Myocardial Bridges and their Relationship to the Anterior Interventricular Branch of the Left Coronary Artery

OBJECTIVE: To analyze the relationship between myocardial bridges and the anterior interventricular branch (anterior descending) of the left coronary artery. METHODS: The study was carried out with postmortem material, and methods of dissection and observation were used. We assessed the perimeter of the anterior interventricular branch of the left coronary artery using a pachymeter, calculated its proximal and distal diameters in relation to the myocardial bridge, and also its diameter under the myocardial bridge in 30 hearts. We also observed the position of the myocardial bridge in relation to the origin of the anterior interventricular branch. RESULTS: The diameters of the anterior interventricular branch were as follows: the mean proximal diameter was 2.76±0.76 mm; the mean diameter under the myocardial bridge was 2.08±0.54 mm; and the mean distal diameter was 1.98±0.59 mm. In 33.33% (10/30) of the cases, the diameter of the anterior interventricular branch under the myocardial bridge was lower than the diameter of the anterior interventricular branch distal to the myocardial bridge. In 3.33% (1/30) of the cases, an atherosclerotic plaque was found in the segment under the myocardial bridge. The myocardial bridge was located in the middle third of the anterior interventricular branch in 86.66% (26/30) of the cases. CONCLUSION: Myocardial bridges are more frequently found in the middle third of the anterior interventricular branch of the left coronary artery. The diameter of the anterior interventricular branch of the left coronary artery under the myocardial bridge may be smaller than after the bridge. Myocardial bridges may not provide protection against the formation of atherosclerotic plaque inside the anterior interventricular branch of the left coronary artery.

Benefits of exercise training in the treatment of heart failure: study with a control group

OBJECTIVE: Exercise training programs have been proposed as adjuncts to treatment of heart failure. The effects of a 3-month-exercise-training-program with 3 exercise sessions per week were assessed in patients with stable systolic chronic heart failure. METHODS: We studied 24 patients with final left ventricle diastolic diameter of 70±10mm and left ventricular ejection fraction of 37±4%. Mean age was 52±16 years. Twelve patients were assigned to an exercise training group (G1), and 12 patients were assigned to a control group (G2). Patients underwent treadmill testing, before and after exercise training, to assess distance walked, heart rate, systolic blood pressure, and double product. RESULTS: In G2 group, before and after 3 months, we observed, respectively distance walked, 623±553 and 561± 460m (ns); peak heart rate, 142±23 and 146± 33b/min (ns); systolic blood pressure, 154±36 and 164±26 mmHg (ns); and double product, 22211± 6454 and 24293±7373 (ns). In G1 group, before and after exercise, we observed: distance walked, 615±394 and 970± 537m (p<0.003) peak heart rate, 143±24 and 143±29b/min (ns); systolic blood pressure, 136±33 and 133±24 mmHg (ns); and double product, 19907± 7323 and 19115±5776, respectively. Comparing the groups, a significant difference existed regarding the variation in the double product, and in distance walked. CONCLUSION: Exercise training programs in patients with heart failure can bring about an improvement in physical capacity.

Comparative study of the use of diltiazem as an antispasmodic drug in coronary angiography via the transradial approach

OBJECTIVE: To evaluate the impact of the use, prior to the procedure, of injectable diltiazem to prevent complications. METHODS: Between September 2000 and July 2001, 50 patients underwent transradial coronary angiography and were randomized to receive placebo (GI) or diltiazem (GII) through a catheter inserted into the radial artery. All patients received isosorbide mononitrate. Ultrasound analyses of the radial artery were performed before examination, 30 minutes afterwards, and 7 days afterwards to evaluate the flow, the diameter, and the artery output. RESULTS: The radial artery diameter of GI was 2.4± 0.5 mm before the procedure and 2.3±0.5 mm after 30 minutes (NS), whereas in GII the diameter was 2.2±0.3 mm before the examination and 2.5±0.4 mm 30 minutes after it (P<0.001). Radial artery output in group 1 was 7.3±5.l2 mL/min before the examination and 6.1±3.5 mL/min 30 minutes after the examination (NS), and GII had an increase of 5.9±2.5 mL/min before examination to 9.05± 7.78 mL/min after the examination (P=0.04). Complications (spasm, occlusion, and partial obstruction) occurred in 4 patients (17.4%) in GI and did not occur in GII (P=0.04). CONCLUSION: The study suggests a decrease in vascular complications through the transradial access for coronary angiography with the use of diltiazem as an antispasmodic drug, resulting in the significant increase in the diameter of the radial artery and radial artery output.

Breeding activity of Scinax centralis (Anura, Hylidae) in Central Brazil

From January, 1997 to April, 1998, we studied breeding activity in a population of Scinax centralis Pombal & Bastos, 1996, in the state of Goiás, inside the Cerrado Biome, Brazil. The behavior of males and females in the choruses, the relationships between environmental variables and the presence of individuals, the spatial distribution pattern, amplexus and clutches were analyzed. The breeding season occurred from November to May. The majority of males began to call when they entered the chorus; they were defending their calling sites against other males. We found a positive correlation between the number of females and males in the choruses, but no significant correlation was observed between the operational sexual ratio (OSR, number of reproducing females/number of reproducing males) and the number of calling males. OSR was highly male-biased; on average, there were 40 males for each female. The presence of individuals was positively correlated with air temperature of two previous days and negatively correlated with rainfall on the observation day. Generally, males were non-randomly distributed and satellite males were observed. Females were larger and heavier than males. Egg number, but not diameter of the egg, was correlated with the female size.

First nesting record of the Bay-Capped Wren-Spinetail Spartonoica maluroides (Aves, Furnariidae) in Brazil, with nest and nestling descriptions and notes on breeding behavior

The only breeding record of Spartonoica maluroides (d'Orbigny & Lafresnaye, 1837) for Brazil is based on the observation of a fledgling in southern Rio Grande do Sul in January 1976. On 7 December 2005 we discovered a nest containing three nestlings at the southeastern end of Lagoa Pequena, municipality of Pelotas, Rio Grande do Sul. The nest was concealed at the base of a cavity in a Spartina densiflora (Poaceae) tussock located at the edge of a saltmarsh. The nest was built of fine pieces of dead Scirpus olneyi (Cyperaceae) and S. densiflora leaves firmly interlaced to the internal leaves of the tussock. Live leaves of S. densiflora lining the cavity comprised a substantial part of the nest's architecture, forming most of its upper lateral walls and roof. The lower section was more elaborate, resembling a deep cup and forming a distinct incubation chamber. Adults reached the nest's interior through an irregular apical opening amidst the leaves. The nest was 244 mm high and 140 mm wide. The incubation chamber had an external diameter of 138.5 mm, an internal diameter of 79.4 mm and was 86 mm deep. It was lined with fine leaves and white plant fibers. Nestlings were five to six days old. A total of 107 neossoptiles restricted to the capital, spinal and alar tracts were recorded in one nestling. The distribution of neossoptiles in the ocular region of S. maluroides forms a distinct pattern which can be typical of Furnariidae and related families. Two adults attended the nest, bringing small insects to the nestlings and removing fecal sacs. We recorded at least 74 visits to the nest during a ca. 6 h period during an afternoon. The average number of visits per hour was 12.8 ± 1.3. An adult bird spent on average 0.7 ± 0.56 minutes inside the nest attending nestlings. The nest remained unattended on average for 3.61 ± 3.13 minutes. The hour of the day had no influence on the amount of time spent by an adult in the nest or away from it. We returned to the area on 15 December 2005 and found the nest abandoned. Observations confirm that S. maluroides is a resident breeder in southern Brazil and that the saltmarshes of the Lagoa do Patos estuary are an important year-round habitat for the species. A nestling and the nest were collected to document the record.

Observation on the morphology of Australorbis glabratus

The present morphological study of A. glabratus was based on the observation of shell, radula, renal region and genitalia of 50 specimens having a shell diameter of 18 mm. In this summary we record the data pertaining to the chracteristics that can be used in systematics. The numerals refere to the mean and their standard deviation; no special reference being made, they correspond to length measurements. Shell: 18 mm in diameter, 5.59 ± 0.24 mm in greatest width, 5 to 6 whorls. Right side umbilicated, left one weakly depressed. Last whorl about thrice as tall as the penultimate one at the aperture, the measurements being taken on the right side. Aperture perpendicular or a little oblique. Body, extended: 47.06 ± 3.31 mm. Renal tube: Narrow and elongated, 23.84 ± 1.90 mm, showing a pigmented ridge along its ventral surface. Ovotestis: 12.78 ± 1.50 mm. Mainly trifurcate diverticula attaching in fan-like manner to the collecting canal (this arrangement is seen to best advantage in the cephalic middle of the ovotestis). The collecting canal greatly swells at the cephalic end, narrowing suddenly as it leaves the ovotestis. Ovisperm duct: 13.70 ± 1.68 mm, including the non-unwound seminal vesicle. The latter, situated about 1 mm from the beginning af the ovisperm duct, was 1.14 ± 0.29 mm in greatest diameter, and is beset by numerous short diverticula. Sperm duct: 14.16 ± 1.27 mm, pursuing a sinous course along the oviduct. Prostate: Prostate duct 5.53 ± 0.74 mm, collecting a row of long diverticula, the latter 21.6 ± 3.5 in number. Last diverticulum generally simple or bifurcate, penultimate generally arborescent, bifurcate or simple, antepenultimate nearly always arborescent, the remaining ones arborescent. The arborescent diverticula frequently give off secondary branches. Vas deferens: 17.50 ± 2.05 mm. The ratio vas deferens/vergic sac was 4.7 ± 0.6. Verge: 3.70 ± 0.54 mm long, 0.12 ± 0.03 mm wide. Free end tapering to a point where the sperm canal opens. No penial stylet. Vergic sac: 3.77 ± 0.50 mm long, 0.19 ± 0.01 mm wide. The length ratio vergic sac/preputium was 1 ± 0.02. Preputium: Deeply pigmented, 3.79 ± 0.40 mm long, 0.89 ± 0.12 mm wide in the middle. Muscular diaphragm between it and the vergic sac. Two muscular pilasters along its lateral walls. Oviduct: 10.24 ± 1.29 mm, suddenly swollen at the cephalic end so that it forms a folded pouch capping the beginning of the uterus. Uterus: 10.58 ± 1.18 mm. Vagina: 2.06 ± 0.15 mm long, 0.32 ± 0.05 mm wide, showing a swelling at its caudal portion, just above the opening of the spermathecal duct. Spermatheca: 1.57 ± 0.41 mm long, 0.92 ± 0.23 mm wide. Spermathecal duct 1.15 ± 0.23 mm. Radula: 125 to 163 rows of teeth (mean 141.4 ± 9.8). Radula formula 27-1-27 to 34-1-34 (mean 30.9 ± 1.7).