Energy-Efficient In-Memory Data Stores on Hybrid Memory Hierarchies

Increasingly large amounts of data are stored in main memory of data center servers. However, DRAM-based memory is an important consumer of energy and is unlikely to scale in the future. Various byte-addressable non-volatile memory (NVM) technologies promise high density and near-zero static energy, however they suffer from increased latency and increased dynamic energy consumption.

This paper proposes to leverage a hybrid memory architecture, consisting of both DRAM and NVM, by novel, application-level data management policies that decide to place data on DRAM vs. NVM. We analyze modern column-oriented and key-value data stores and demonstrate the feasibility of application-level data management. Cycle-accurate simulation confirms that our methodology reduces the energy with least performance degradation as compared to the current state-of-the-art hardware or OS approaches. Moreover, we utilize our techniques to apportion DRAM and NVM memory sizes for these workloads.

Power Capping: What Works, What Does Not

Peak power consumption is the first order design constraint of data centers. Though peak power consumption is rarely, if ever, observed, the entire data center facility must prepare for it, leading to inefficient usage of its resources. The most prominent way for addressing this issue is to limit the power consumption of the data center IT facility far below its theoretical peak value. Many approaches have been proposed to achieve that, based on the same small set of enforcement mechanisms, but there has been no corresponding work on systematically examining the advantages and disadvantages of each such mechanism. In the absence of such a study,it is unclear what is the optimal mechanism for a given computing environment, which can lead to unnecessarily poor performance if an inappropriate scheme is used. This paper fills this gap by comparing for the first time five widely used power capping mechanisms under the same hardware/software setting. We also explore possible alternative power capping mechanisms beyond what has been previously proposed and evaluate them under the same setup. We systematically analyze the strengths and weaknesses of each mechanism, in terms of energy efficiency, overhead, and predictable behavior. We show how these mechanisms can be combined in order to implement an optimal power capping mechanism which reduces the slow down compared to the most widely used mechanism by up to 88%. Our results provide interesting insights regarding the different trade-offs of power capping techniques, which will be useful for designing and implementing highly efficient power capping in the future. 

Generalized collisional radiative model for light elements. Part B: Data for the Be isonuclear sequence

A first-stage collision database is assembled which contains electron-impact excitation, ionization, and recombination rate coefficients for Be, Be+, Be2+, and Be3+. The first-stage database is constructed using the R-matrix with pseudo-states, time-dependent close-coupling, and perturbative, distorted-wave methods. A second-stage collision database is then assembled which contains generalized collisional-radiative and radiated power loss coefficients. The second-stage database is constructed by solution of collisional-radiative equations in the quasi-static equilibrium approximation using the first-stage database. Both collision database stages reside in electronic form at the ORNL Controlled Fusion Atomic Data Center and in the ADAS database, and are easily accessed over the worldwide internet. © 2007 Elsevier Inc. All rights reserved.

Generalised collisional-radiative model for light elements. A: Data for the Li isonuclear sequence

A first stage collision database is assembled which contains electron-impact effective collision strengths, and ionization and recombination rate coefficients for Li, Li+, and Li2+. The first stage database is constructed using the R-matrix with pseudo-states, time-dependent close-coupling, converged close-coupling, and perturbative distorted-wave methods. A second stage collision database is then assembled which contains generalized collisional-radiative and radiated power loss coefficients. The second stage database is constructed by solution of collisional-radiative equations in the quasi-static equilibrium approximation using the first stage database. Both collision database stages reside in electronic form at the ORNL Controlled Fusion Atomic Data Center and in the ADAS database, and are easily accessed over the worldwide internet. ?? 2006 Elsevier Inc. All rights reserved.

Nonlinear behavioral modeling of mixed signal RF-digital I/O devices

Esta tese investiga a caracterização (e modelação) de dispositivos que realizam o interface entre os domínios digital e analógico, tal como os buffers de saída dos circuitos integrados (CI). Os terminais sem fios da atualidade estão a ser desenvolvidos tendo em vista o conceito de rádio-definido-por-software introduzido por Mitola. Idealmente esta arquitetura tira partido de poderosos processadores e estende a operação dos blocos digitais o mais próximo possível da antena. Neste sentido, não é de estranhar que haja uma crescente preocupação, no seio da comunidade científica, relativamente à caracterização dos blocos que fazem o interface entre os domínios analógico e digital, sendo os conversores digital-analógico e analógico-digital dois bons exemplos destes circuitos. Dentro dos circuitos digitais de alta velocidade, tais como as memórias Flash, um papel semelhante é desempenhado pelos buffers de saída. Estes realizam o interface entre o domínio digital (núcleo lógico) e o domínio analógico (encapsulamento dos CI e parasitas associados às linhas de transmissão), determinando a integridade do sinal transmitido. Por forma a acelerar a análise de integridade do sinal, aquando do projeto de um CI, é fundamental ter modelos que são simultaneamente eficientes (em termos computacionais) e precisos. Tipicamente a extração/validação dos modelos para buffers de saída é feita usando dados obtidos da simulação de um modelo detalhado (ao nível do transístor) ou a partir de resultados experimentais. A última abordagem não envolve problemas de propriedade intelectual; contudo é raramente mencionada na literatura referente à caracterização de buffers de saída. Neste sentido, esta tese de Doutoramento foca-se no desenvolvimento de uma nova configuração de medição para a caracterização e modelação de buffers de saída de alta velocidade, com a natural extensão aos dispositivos amplificadores comutados RF-CMOS. Tendo por base um procedimento experimental bem definido, um modelo estado-da-arte é extraído e validado. A configuração de medição desenvolvida aborda não apenas a integridade dos sinais de saída mas também do barramento de alimentação. Por forma a determinar a sensibilidade das quantias estimadas (tensão e corrente) aos erros presentes nas diversas variáveis associadas ao procedimento experimental, uma análise de incerteza é também apresentada.

REVERIE: Natural Human Interaction in Virtual Immersive Environments

REVERIE (REal and Virtual Engagement in Realistic Immersive Environments [1]) targets novel research to address the demanding challenges involved with developing state-of-the-art technologies for online human interaction. The REVERIE framework enables users to meet, socialise and share experiences online by integrating cutting-edge technologies for 3D data acquisition and processing, networking, autonomy and real-time rendering. In this paper, we describe the innovative research that is showcased through the REVERIE integrated framework through richly defined use-cases which demonstrate the validity and potential for natural interaction in a virtual immersive and safe environment. Previews of the REVERIE demo and its key research components can be viewed at www.youtube.com/user/REVERIEFP7.

Ontologies for reusing data cleaning knowledge

The emergence of new business models, namely, the establishment of partnerships between organizations, the chance that companies have of adding existing data on the web, especially in the semantic web, to their information, led to the emphasis on some problems existing in databases, particularly related to data quality. Poor data can result in loss of competitiveness of the organizations holding these data, and may even lead to their disappearance, since many of their decision-making processes are based on these data. For this reason, data cleaning is essential. Current approaches to solve these problems are closely linked to database schemas and specific domains. In order that data cleaning can be used in different repositories, it is necessary for computer systems to understand these data, i.e., an associated semantic is needed. The solution presented in this paper includes the use of ontologies: (i) for the specification of data cleaning operations and, (ii) as a way of solving the semantic heterogeneity problems of data stored in different sources. With data cleaning operations defined at a conceptual level and existing mappings between domain ontologies and an ontology that results from a database, they may be instantiated and proposed to the expert/specialist to be executed over that database, thus enabling their interoperability.

Das conceções às práticas de avaliação formativa no 1.º ciclo do ensino básico

Relatório de estágio apresentado à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Ensino do 1.º e 2.º Ciclo do Ensino Básico

Classificação Internacional de Funcionalidade, Incapacidade e Saúde : uma dimensão do neurodesenvolvimento

RESUMO: Objetivo Principal • Determinar a consistência da utilização dos instrumentos de avaliação da capacidade intelectual – escalas de Griffiths e WISC III – no enquadramento dos domínios e dos qualificadores da CIF-CJ, restrita às funções mentais do corpo. Objetivo secundário: • Estudar a efetividade e concordância inter-observador da aplicação da CIF, com base na leitura dos dados obtidos em avaliação efetuada com os instrumentos referidos, por duas observadoras independentes, em contexto de articulação saúde, respetivamente educação e segurança social Métodos • Estudo observacional, descritivo, transversal e prospetivo. • Foi estudada uma amostra de conveniência 355 crianças, num período de três anos (Maio de 2010 a 30 de Abril de 2013), com patologia da área da pediatria do neurodesenvolvimento (total de 4000 consultas) no Centro de Desenvolvimento (CD) do Hospital de Dona Estefânia (HDE), Centro Hospitalar de Lisboa Central, EPE (CHLC, EPE). • Critérios de inclusão: crianças de ambos os sexos, observadas no CD do HDE, CHLC (primeiras consultas e consultas de reavaliação) com idade ≥12 meses e ≤17 anos e incapacidade intelectual definida de acordo com os critérios da DSM-IV-TR, DSM 5 e CID-10. • Critérios de exclusão: crianças com autismo, perturbações específicas da linguagem, hiperatividade, défice de atenção e concentração, défices sensoriais congénitos (baixa visão e ou audição), ou com outros diagnósticos de perturbações de neurodesenvolvimento. • O estudo teve duas fases: na primeira, a investigadora principal colheu ou atualizou a história clínica, observou clinicamente as crianças solicitando os exames complementares considerados necessários e foi efetuada avaliação psicológica com os instrumentos adiante descritos, pela mesma psicóloga clínica, devidamente credenciada, e com larga experiência nas escalas referidas. Com base nos dados colhidos, quer por observação direta, quer através dos resultados das escalas Griffiths e WISC – III, a investigadora aplicou a CIF-CJ, circunscrita aos domínios e funções (variáveis): 1. FUNÇÕESMENTAIS GLOBAIS (b110- Funções da consciência, b114- Funções da orientação no espaço e no tempo, b117 – Funções intelectuais, b122- Funções psicossociais globais, b125- Funções intrapessoais, b126- Funções do temperamento e da personalidade); 2.FUNÇÕES MENTAIS ESPECÌFICAS (b140- funções da atenção, b147- Funções psicomotoras, b152- Funções emocionais, b156- Funções da perceção, b163- Funções cognitivas básicas, b164- Funções cognitivas de nível superior, b167- Funções mentais da linguagem 3. FUNÇÕES DA VOZ E DA FALA (b320- Funções da articulação, b330- Funções da fluência e do ritmo da fala). Numa segunda fase, foi solicitada a colaboração de duas co-investigadoras, com formação específica nas escalas utilizadas e na CIF-CJ, a aplicação da CIF nos mesmos domínios e funções. Estas observadoras não efetuaram observações diretas das crianças envolvidas. • Para efetuar a análise estatística e analisar a relação entre os qualificadores (0 a 4) das variáveis da CIF em estudo (b117, b122, b147, b163, b164, b167, b320 e b330) e os instrumentos psicométricos (escalas de Griffiths e WISC III), que constitui a primeira parte do estudo, recorreu-se à técnica estatística não paramétrica do coeficiente de correlação de Spearman, que quantifica a intensidade e sinal da eventual correlação existente entre as variáveis em estudo. • Para determinar as correlações referentes à segunda parte do estudo, foram utilizados os programas SPSS®, (IBM SPSS Statistics) e Statistica® (StatSoft, Inc., 2011). STATISTICA (data analysis software system, version 10. www.statsoft.com.), tendo-se dado preferência aos gráficos deste último. Resultados 1. Observou-se um predomínio do sexo masculino (relação de 1:1,9); relativamente à idade no momento de avaliação, 242 crianças (68,1%) tinham entre zero e seis anos e, dentro destas, a maioria (189) situava-se entre os três e os seis anos. 2. De acordo com a DSM-IV e DSM-5, 261 (73,4%) crianças apresentavam incapacidade intelectual ligeira. 3. A avaliação da competência intelectual pelas escalas de Ruth Griffiths e WISC III (QI), revelaram correlação negativa predominantemente forte e muito forte (índice de Spearman) com os qualificadores das funções do corpo estudadas (funções mentais, mentais específicas e da voz). Os resultados obtidos pela co-investigadora A foram sobreponíveis aos da investigadora principal. Os resultados obtidos pela co-investigadora B revelaram correlação negativa moderada e forte, correlação inferior à da investigadora principal; Conclusões Os resultados permitem inferir que as escalas de Ruth Griffiths e WISC-III são instrumentos adequados para caracterizar a incapacidade intelectual na CIF-CJ; a concordância inter-observador, moderada, nos qualificadores atribuídos nas funções em análise pela investigadora e co-investigadoras, permite concluir que as escalas de Ruth Griffiths e WISC IIIl são bons instrumentos para caracterizar os qualificadores nos domínios e funções estudados, por diferentes grupos de profissionais ligados à infância. Subsistem dificuldades na diferenciação entre qualificadores, designadamente entre os qualificadores 1 e 2, o que tem necessariamente implicações na elegibilidade das crianças para os apoios preconizados pelo DL 3/2008. ------------------------ ABSTRACT: Main objective • To determine the consistency of the use of assessment tools for intellectual ability - Griffiths and WISC III scales - in the context of domains and qualifiers for the ICF-CY, restricted to the mental functions of the body. Secondary objective • Studying the effectiveness and inter-observer concordance concerning the application of the ICF, based on the data recovered from the assessment made with the mentioned instruments, carried out by two independent observers including their perspective on health, education and social security. Methods • Observational, descriptive, cross-sectional and prospective study. • A convenience sample of 355 children was studied over a period of three years (May 2010 to April 2013), with a pathology in the area of pediatric neurodevelopment – intellectual disability (total of 4000 consultations, including first consultations and revaluations) were observed in the Development Centre (CD) in Hospital de Dona Estefânia (HDE), Centro Hospitalar de Lisboa Central, EPE (CHLC). • Inclusion criteria: children of both sexes aged ≥12 months and years ≤17 and intellectual disability defined according to the criteria in the DSM-IV-TR, DSM 5 and ICD-10. • Exclusion criteria: children with autism; specific language impairment, hyperactivity; attention deficit disorder; severe birth sensory deficits (eg, impaired vision and hearing); amongst other diagnoses for neurodevelopmental disorders. • The study was conducted in two phases: in the first phase the principal investigator collected or updated medical history, clinically observed children requesting additional investigations if she deemed necessary. Psychological evaluation was performed by a single, duly licensed clinical psychologist with extensive experience in the referred scales using the instruments described below. Based on data collected, either by direct observation or through the results of Griffiths scales and WISC - III, the researcher applied the ICF-CY confined to the following fields and functions (variables): 1. GLOBAL MENTAL FUNCTIONS (b110- functions of consciousness, b114- Functions referring to space and time orientation , b117 - intellectual functions, b122- global psychosocial functions, b125- intrapersonal functions, b126- functions related to temperament and personality); 2. SPECIFIC MENTAL FUNCTIONS ( b140- attention functions, b147-psychomotor functions, b152- Emotional functions, b156- perception functions, b163- basic cognitive functions and cognitive functions b164- top level b167- language related mental functions. ) 3. VOICE AND SPEECH FUNCTIONS (b320-articulation functions, b330- fluency and rhythm of speech functions). • In the second phase, two co-investigators, with specific training on the scales used and the ICF-CY have applied the ICF in the domains and functions mentioned above, based on the scales results. These co-investigators did not make any direct observation of the studied children. • To perform the statistical analysis and analyze the relationship between the qualifiers (0-4) of the variables in the ICF study (b117, b122, b147, B163, B164, b167, b320 and B330) and psychometric instruments (Griffiths scale and WISC III), which is the first part of the study, the statistical technique of non-parametric Spearman correlation coefficient was used, which quantifies the strength and sign of the possible correlation between the variables under study. • For submission of correlations related to the second part of the study, SPSS (IBM SPSS) and Statistica (StatSoft, Inc., 2011) programs were used. STATISTICA (data analysis software system, version 10 www.statsoft.com.). Preference was given to graphs computed in Statistica. Results • Male predominated (ratio of 1: 1.9). 242 children (68.1% of the sample) were aged between zero and six years and, among these, the majority (189) was aged largest number between three and six years. • According to the DSM-IV and DSM-5, 261 (73.4%) children had mild intellectual disability. The correlation between the assessment of intellectual competence by Ruth Griffiths scales and WISC III (QI), was predominantly negative strong and very strong correlation with the qualifiers of body functions studied (specific mental functions, mental and voice functions using Spearman index). The levels of correlation obtained by the co-investigatores were in agreeance with the results from the principal investigator. The results obtained by co-investigator B showed moderate to strong negative correlation, levels that were lower to the those registered by the principal investigator; Conclusions These results indicate that Ruth Griffiths and WISC-III scales are adequate tools to characterize intellectual disability in the ICF-CY; moderate inter-observer agreement in the qualifiers assigned the functions under analysis by the researcher and co-researchers, shows that the scales are also good tools to measure CIF qualifyers by diferent technicians with different professional orientations, related to children. However, there are still difficulties in differentiating qualifiers, namely between qualifiers 1/2 and 3/4, which necessarily has implications for the eligibility of children for the state support advocated by the Portuguese Decret Law 3/2008.

Epidemiology of pulmonary hypertension: new data from the Swiss registry.

since 1999 data from pulmonary hypertension (PH) patients from all PH centres in Switzerland were prospectively collected. We analyse the epidemiological aspects of these data. PH was defined as a mean pulmonary artery pressure of >25 mm Hg at rest or >30 mm Hg during exercise. Patients with pulmonary arterial hypertension (PAH), PH associated with lung diseases, PH due to chronic thrombotic and/or embolic disease (CTEPH), or PH due to miscellaneous disorders were registered. Data from adult patients included between January 1999 and December 2004 were analysed. 250 patients were registered (age 58 +/- 16 years, 104 (41%) males). 152 patients (61%) had PAH, 73 (29%) had CTEPH and 18 (7%) had PH associated with lung disease. Patients <50 years (32%) were more likely to have PAH than patients >50 years (76% vs. 53%, p <0.005). Twenty-four patients (10%) were lost to followup, 58 patients (26%) died and 150 (66%) survived without transplantation or thrombendarterectomy. Survivors differed from patients who died in the baseline six-minute walking distance (400 m [300-459] vs. 273 m [174-415]), the functional impairment (NYHA class III/IV 86% vs. 98%), mixed venous saturation (63% [57-68] vs. 56% [50-61]) and right atrial pressure (7 mm Hg [4-11] vs. 11 mm Hg [4-18]). PH is a disease affecting adults of all ages. The management of these patients in specialised centres guarantees a high quality of care. Analysis of the registry data could be an instrument for quality control and might help identify weak points in assessment and treatment of these patients.

Étude des collisions proton-proton dans l’expérience ATLAS avec les détecteurs ATLAS-MPX

Les seize détecteurs MPX constituant le réseau ATLAS-MPX ont été placés à différentes positions dans le détecteur ATLAS et sa averne au CERN dans le but de mesurer en emps réel les champs de radiation produits ar des particules primaires (protons des faisceaux) et des particules secondaires (kaons, pions, g, protons) issues des collisions proton-proton. Des films de polyéthylène (PE) et de fluorure de lithium (6LiF) recouvrent les détecteurs afin d’augmenter leur sensibilité aux neutrons produits par les particules primaires et secondaires interagissant avec les matériaux présents dans l’environnement d’ATLAS. La reconnaissance des traces laissées par les particules dans un détecteur ATLAS-MPX se fait à partir des algorithmes du logiciel MAFalda (“Medipix Analysis Framework”) basé sur les librairies et le logiciel d’analyse de données ROOT. Une étude sur le taux d’identifications erronées et le chevauchement d’amas a été faite en reconstruisant les activités des sources 106Ru et 137Cs. L’efficacité de détection des neutrons rapides a été mesurée à l’aide des sources 252Cf et 241AmBe (neutrons d’énergie moyenne de 2.13 et 4.08 MeV respectivement). La moyenne des efficacités de détection mesurées pour les neutrons produits par les sources 252C f et 241AmBe a été calculée pour les convertisseurs 6LiF et PE et donnent (0.8580 ± 0.1490)% et (0.0254 ± 0.0031)% pour LiF et (0.0510 ± 0.0061)% et (0.0591 ± 0.0063)% pour PE à bas et à haut seuil d’énergie respectivement. Une simulation du calcul de l’efficacité de détection des neutrons dans le détecteur MPX a été réalisée avec le logiciel GEANT4. Des données MPX correspondant aux collisions proton-proton à 2.4 TeV et à 7 TeV dans le centre de masse ont été analysées. Les flux détectés d’électrons et de photons sont particulièrement élevés dans les détecteurs MPX01 et MPX14 car ils sont plus près du point de collision. Des flux de neutrons ont été estimés en utilisant les efficacités de détection mesurées. Une corrélation avec la luminosité du LHC a été établie et on prédit que pour les collisions à 14 TeV dans le centre de masse et avec une luminosité de 10^34 cm-1*s-1 il y aura environ 5.1x10^8 ± 1.5x10^7 et 1.6x10^9 ± 6.3x10^7 particules détectées par les détecteurs MPX01 et MPX14 respectivement.

Virtual Radio Engine

Software Defined Radio (SDR) hardware platforms use parallel architectures. Current concepts of developing applications (such as WLAN) for these platforms are complex, because developers describe an application with hardware-specifics that are relevant to parallelism such as mapping and scheduling. To reduce this complexity, we have developed a new programming approach for SDR applications, called Virtual Radio Engine (VRE). VRE defines a language for describing applications, and a tool chain that consists of a compiler kernel and other tools (such as a code generator) to generate executables. The thesis presents this concept, as well as describes the language and the compiler kernel that have been developed by the author. The language is hardware-independent, i.e., developers describe tasks and dependencies between them. The compiler kernel performs automatic parallelization, i.e., it is capable of transforming a hardware-independent program into a hardware-specific program by solving hardware-specifics, in particular mapping, scheduling and synchronizations. Thus, VRE simplifies programming tasks as developers do not solve hardware-specifics manually.

CODAPACK3D. A new version of Compositional Data Package

The statistical analysis of compositional data should be treated using logratios of parts, which are difficult to use correctly in standard statistical packages. For this reason a freeware package, named CoDaPack was created. This software implements most of the basic statistical methods suitable for compositional data. In this paper we describe the new version of the package that now is called CoDaPack3D. It is developed in Visual Basic for applications (associated with Excel©), Visual Basic and Open GL, and it is oriented towards users with a minimum knowledge of computers with the aim at being simple and easy to use. This new version includes new graphical output in 2D and 3D. These outputs could be zoomed and, in 3D, rotated. Also a customization menu is included and outputs could be saved in jpeg format. Also this new version includes an interactive help and all dialog windows have been improved in order to facilitate its use. To use CoDaPack one has to access Excel© and introduce the data in a standard spreadsheet. These should be organized as a matrix where Excel© rows correspond to the observations and columns to the parts. The user executes macros that return numerical or graphical results. There are two kinds of numerical results: new variables and descriptive statistics, and both appear on the same sheet. Graphical output appears in independent windows. In the present version there are 8 menus, with a total of 38 submenus which, after some dialogue, directly call the corresponding macro. The dialogues ask the user to input variables and further parameters needed, as well as where to put these results. The web site http://ima.udg.es/CoDaPack contains this freeware package and only Microsoft Excel© under Microsoft Windows© is required to run the software. Kew words: Compositional data Analysis, Software

Improving data perturbation testing techniques for Web services

The widespread use of service-oriented architectures (SOAs) and Web services in commercial software requires the adoption of development techniques to ensure the quality of Web services. Testing techniques and tools concern quality and play a critical role in accomplishing quality of SOA based systems. Existing techniques and tools for traditional systems are not appropriate to these new systems, making the development of Web services testing techniques and tools required. This article presents new testing techniques to automatically generate a set of test cases and data for Web services. The techniques presented here explore data perturbation of Web services messages upon data types, integrity and consistency. To support these techniques, a tool (GenAutoWS) was developed and applied to real problems. (C) 2010 Elsevier Inc. All rights reserved.