972 resultados para DESENVOLVIMENTO MOTOR
Resumo:
The scope of this article is to evaluate risk and protection factors for the development of 1-year-olds assisted at family health care units. It is a cross-sectional study involving 65 children of approximately 1 year of age and their mothers attended at two family health care units. The development was assessed using a developmental screening test (Denver II). The mothers filled out the SRQ-20 questionnaire to identify common mental disorder (CMD) indicators. After data collection, descriptive and inferential statistical analysis was performed. Global development was at risk in 43.1% of the children evaluated, and the most affected areas were language and fine motor development; 44.6% of mothers had results indicative of CMD when the child was 1 year of age. In bivariate analysis, reported depression, smoking, infections in pregnancy, CMD after birth and working outside the home were significantly associated with the children's development. After full statistical analysis, CMD was revealed as being a risk factor, and working away from home as being a protection factor. In order to increase the chances of success of programs targeted for children at health care units and avoiding the risk of impaired development, it is important to focus on two aspects: children's stimulation and maternal mental health.
Resumo:
Pós-graduação em Engenharia Mecânica - FEIS
Resumo:
Children with cerebral palsy due to movement and posture disorders might have an injured nutritional state. This study's objective was to classify the body mass index of children with cerebral palsy and verify its relation with the injury level of gross motor function. Twenty children, male and female sex, with cerebral palsy with ages between 2 and 14 years participated in the study. They were chosen from a rehabilitation center with physiotherapy, occupational and speech therapy accompaniment. Children were classified according to the gross motor function classification scale. The anthropometric measures of each child weight, heel-knee length, estimated stature and body mass index were gauged. The body mass index was classified according to the Center for Disease Control and Prevention's body mass index percentile calculator for children and teenagers. The obtained data didn't show any relation between the gross motor function and body mass index. The reduced number of participants and the fact of all children be accompanied in dysphagia clinics and, when necessary, nutrition clinics, might have influenced these results.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Na sociedade atual, é comum a diminuição do tempo de sono da população visando cumprir as inúmeras exigências da rotina diária do estilo agitado de vida atual. As consequências da falta de sono são diversas e afetam mais as mulheres que os homens, podendo influenciar diretamente a gravidez. Assim, o objetivo do presente estudo foi avaliar os efeitos da restrição de sono durante o período gestacional no desenvolvimento dos filhotes. Os descendentes foram analisados quanto ao desenvolvimento físico e reflexológico desde o 1º dia de vida pós-natal até a vida adulta reprodutiva. Ao final dos experimentos, os animais foram eutanasiados para coleta de sangue para dosagens de testosterona e progesterona. Os resultados obtidos mostraram que a restrição de sono (RS) durante a prenhez foi prejudicial ao desenvolvimento pós-natal dos descendentes. Houve danos em diversos parâmetros do desenvolvimento físico e sensório-motor, como abertura dos olhos, desdobramento das orelhas e reflexo de sobressalto auditivo. O comportamento sexual dos machos também foi afetado, evidenciado pelo aumento da latência para monta e menor número de montas, caracterizando diminuição da motivação sexual. Isso se deve principalmente ao declínio de progesterona no grupo RS. O desempenho sexual desses animais, no entanto, não foi prejudicado, uma vez que não houve alteração na concentração de testosterona no grupo RS, comparado ao grupo CTRL. Houve também um aumento no interesse sexual nas descendentes fêmeas, possivelmente devido à elevação da testosterona no grupo RS. Esperou-se com este projeto traçar a dimensão dos efeitos da falta de sono durante a gestação sobre o desenvolvimento da prole, procurando conscientizar a mulher da importância do sono para o seu bebê
Resumo:
This paper aims to show practical and effectiveexperiencesfor lessons Industrial Automation Laboratory taught inundergraduate degreein ElectricalEngineering from the University Júlio MesquitaFilho - UNESP, Guaratinguetá. Experiments carriedsimulatecontrol and drive systems of electric three phase induction motors (MIT)widely usedinindustries. The experiments simulate a manufacturing environment where there isa need to control the activation and continuous operation ofelectricmotors. Seven experimentsthat simulatethe firing of electrical motors through a controlsystem, a driver along with asimulator loads coupled to the electric motor was developed. Experiments usinga Programmable Logic Controller (PLC) as acontroller,an inverter frequencyasdriver, and MagneticBrake, as simulatorengine loads . The experiments were divided accordingto the speed reference signal used fordrivingand operating the electric motor: digital and analog. The first five experiments performing the drive control and operation of the electric motor via digital signals. The sixth and seventh experiments using an analog signal as a reference speed for the electric motor
Resumo:
The aim of the present study was to examine tapping synchronization in children with and without Developmental Coordination Disorder (DCD). Participants were 27 children from which 13 diagnosed with motor difficulties composed the DCD group and 14 children with typical development (TD) the comparison group. The experimental task consisted of performing 25 continuous tapping on a surface of an electronic drum with the preferred hand. Participants were required to tap in synchrony with an auditory bip generated by customized software. Three interval values the tapping task were tested: 470 ms, 1000 ms, 1530 ms. The dependent variables were constant error (CE) and absolute error (AE) and standard deviation of absolute error (SD of AE). The ANOVA 2 x 3 x 3 (Group X Age x Interval) with repeated measures in the last factor for the CE indicated significant interaction among Group X Age X Interval. For the AE and SD of AE the ANOVAs yielded significant main effect of Interval and a significant interaction between Group X Interval. The results of the present study indicated that children with DCD were less accurate and more variable in the tapping synchronization than children with TD. Differences in performance between DCD and children with TD become larger as the interval of the auditory signal increases.
Resumo:
Due to motor difficulties, children with developmental coordination disorder (DCD) doesn't feel motivated to do physical activities, sometimes resulting in a decline of their physical fitness, but it isn't really known for sure the reasons that induct children with DCD to low performances in physical fitness tests, because a lot of tasks that are part of the battery of tests of physical performance are complex in the coordination and/or motor control point of view, like the vertical jump for example. Therefore, the objective of this study was to investigate the factors that induct children with DCD to low performances in physical fitness tests, especially in the vertical jump task. For that, cinematic (duration of the eccentrical phase, duration of the concentrical phase, shift of the mass center and velocity of the mass center), kinetic (potency peak and force peak) and vertical jump performance analysis in two conditions (with the use of arms and without it) were realized in a force platform. The results indicated that children with DCD show a lower performance compared to their peers with typical development (TD), due to a lower potency production
Resumo:
The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading
Resumo:
The present work develops a fuzzy inference system to control the rotation speed of a DC motor available in Degem Kit. Therefore, it should use the fuzzy toolbox of Matlab in conjunction with the data acquisition board NI - USB - 6009, a National Instrument’s board. An introduction to fuzzy logic, the mathematical model of a DC motor and the operation of data acquisition board is presented first. Followed by the controller fuzzy model implemented using Simulink which is described in detail. Finally, the prototype is shown and the simulator results are presented
Resumo:
This work aims the design and analysis of a thrust frame system for a liquid fuel rocket engine. The project was developed following the design requirements established by the Division of Space Propulsion of the Institute of Aeronautics and Space. The layout of the structure was developed with the aid of a software of 3D modeling and static and dynamic analysis were performed by using a finite element package. The results of the analyzes helped in defining the layout of the structure which met all design requirements. The safety factor and the mass achieved were comfortably low, which may be useful in the future because the liquid fuel rocket engine is still in development
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)