Estudio de los principales CMS para la creación de una red social

Actualmente las redes sociales son muy utilizadas en todo el mundo, existen diferentes tipos de redes sociales con las que podemos conectar con amigos, ampliar nuestra red de contactos profesionales, aprender cosas nuevas, etc. Su elevado uso las ha convertido en uno de los negocios más rentables en internet generando fortunas para sus creadores, principalmente, a través de la publicidad. Muchas redes sociales son creadas por empresas que cuentan con un equipo experto, pero otras muchas han sido creadas por personas comunes, con bajos conocimientos informáticos, muchos motivados en sus aficiones o carreras profesionales, que al no encontrar nada en la red que les resulte útil, han decidido desarrollar ellos mismos sus propias redes sociales con la ayuda de herramientas informáticas. Una de esas herramientas son los sistemas de gestión de contenidos (CMS), con los cuales ahorraremos mucho tiempo de desarrollo y no necesitaremos invertir grandes cantidades de dinero. Este proyecto trata, principalmente, de cómo crear redes sociales haciendo uso de estas herramientas y tiene el objetivo de ser lo suficientemente claro para que cualquier persona, sin importar su nivel de conocimientos técnicos, sea capaz de desarrollar sus ideas. En la primera parte del proyecto se habla sobre las redes sociales en general y el impacto de éstas en la sociedad actual, donde se ve que, actualmente, debido a la cantidad de redes sociales y a la accesibilidad móvil, el uso de las redes sociales es una cotidianidad. También se explican algunos métodos para obtener beneficios económicos de una red social y las ventajas que presentan las redes sociales específicas frente a las generalistas, concluyendo que las redes sociales específicas van ganando mayor protagonismo con el paso del tiempo. Además, se habla sobre la crítica de las redes sociales desde el punto de vista del usuario de la red, donde se resalta el tema de la administración de la publicidad y la privatización que han supuesto las redes sociales. Posteriormente se presenta una base teórica sobre las herramientas antes mencionadas, los CMS. Se explica su funcionamiento, clasificación y las ventajas que obtenemos con el uso de este software en nuestros proyectos, de los cuales destacan el corto tiempo de desarrollo y el bajo coste. Al final se eligen los CMS de estudio en este proyecto principalmente en base a tres criterios: licencia, cuota de uso y características de red social. En la segunda parte del proyecto se habla acerca de los CMS elegidos: WordPress con su plugin BuddyPress, Elgg, y Joomla con su plugin JomSocial. Se explican las características de cada uno de ellos y se muestran ejemplos de redes sociales reales hechas con estos CMS. En esta parte del proyecto se hace un uso práctico de estos CMS y se detalla paso a paso todo el proceso de creación de una red social (instalación, configuración y personalización de la red social) para cada CMS. El resultado son tres redes sociales hechas con distintos CMS, de los cuales se hace una valoración en base a la experiencia obtenida con el uso de los mismos, concluyéndose que JomSocial es una buena opción para redes sociales de uso generalista, pero para redes específicas son mejores tanto Elgg como BuddyPress, presentando este último una ligera ventaja por tener una gran comunidad en español. ABSTRACT. Nowadays social networks are widely used throughout the world, there are different types of social networks where you can connect with friends, expand your network of professional contacts, learn new things, etc. Its high usage has turned them into one of the most profitable businesses on Internet generating fortunes to its developers, mainly through advertising. Many social networks are developed by companies that count on an expert team, but many others have been created by ordinary people, with low computer skills, many of them motivated in their hobbies or careers, that did not find anything useful on Internet and decide to develop their own social networks with the help of software tools. One of those tools is a content management system (CMS), which will help us to save a lot of development time and we will not need to invest large amounts of money. This project is, mainly, about how to create social networks using these tools and aims to be clear enough to help anyone, regardless of their computer skills, to develop their ideas. The first part of the project is about social networks in general and the impact on today's society, where we can see that, due to the number of social networks and mobile accessibility, the use of social networks is daily. Also it explains some ways to obtain economic benefits from a social network and the advantages of specific social networks against generalist social networks, concluding that specific social networks are gaining more prominence with the passage of time. In addition, it refers on social networks critique from the point of view of social network users, where it highlights the issue of the advertising administration and privatization which have brought social networks. Subsequently, it presents a theoretical base of the above mentioned tools, CMS. Explains their operation, classification and the advantages we get with the use of this software in our projects, where the short development time and lower cost are highlighted. At the end the CMS studied in this project are chosen mainly based on three criteria: license, community size and social network features. The second part of the project is about the chosen CMS: WordPress with its plugin BuddyPress, Elgg, and Joomla with its plugin JomSocial. It explains features of all of them and shows examples of real social networks developed with these CMS. This part of the project is a practical use of these CMS and detailed step by step throughout the process of creating a social network (installation, configuration and customization of the social network) for each CMS. The result are three social networks made with different CMS, from which is made an assessment on the basis of the experience gained with the use of these software, concluding that JomSocial is a good choice to develop generalist social networks, but for specific social networks are better Elgg and BuddyPress, presenting the latter a slight advantage by having a large community in Spanish.

Improving brain injury cognitive rehabilitation by personalized telerehabilitation services: Guttmann neuropersonal trainer

Cognitive rehabilitation aims to remediate or alleviate the cognitive deficits appearing after an episode of acquired brain injury (ABI). The purpose of this work is to describe the telerehabilitation platform called Guttmann Neuropersonal Trainer (GNPT) which provides new strategies for cognitive rehabilitation, improving efficiency and access to treatments, and to increase knowledge generation from the process. A cognitive rehabilitation process has been modeled to design and develop the system, which allows neuropsychologists to configure and schedule rehabilitation sessions, consisting of set of personalized computerized cognitive exercises grounded on neuroscience and plasticity principles. It provides remote continuous monitoring of patient's performance, by an asynchronous communication strategy. An automatic knowledge extraction method has been used to implement a decision support system, improving treatment customization. GNPT has been implemented in 27 rehabilitation centers and in 83 patients' homes, facilitating the access to the treatment. In total, 1660 patients have been treated. Usability and cost analysis methodologies have been applied to measure the efficiency in real clinical environments. The usability evaluation reveals a system usability score higher than 70 for all target users. The cost efficiency study results show a relation of 1-20 compared to face-to-face rehabilitation. GNPT enables brain-damaged patients to continue and further extend rehabilitation beyond the hospital, improving the efficiency of the rehabilitation process. It allows customized therapeutic plans, providing information to further development of clinical practice guidelines.

Una propuesta de modelado del estudiante basada en ontologías y diagnóstico pedagógico-cognitivo no monótono

Los recientes avances tecnológicos han encontrado un potencial campo de explotación en la educación asistida por computador. A finales de los años 90 surgió un nuevo campo de investigación denominado Entornos Virtuales Inteligentes para el Entrenamiento y/o Enseñanza (EVIEs), que combinan dos áreas de gran complejidad: Los Entornos Virtuales (EVs) y los Sistemas de Tutoría Inteligente (STIs). De este modo, los beneficios de los entornos 3D (simulación de entornos de alto riesgo o entornos de difícil uso, etc.) pueden combinarse con aquéllos de un STIs (personalización de materias y presentaciones, adaptación de la estrategia de tutoría a las necesidades del estudiante, etc.) para proporcionar soluciones educativas/de entrenamiento con valores añadidos. El Modelo del Estudiante, núcleo de un SIT, representa el conocimiento y características del estudiante, y refleja el proceso de razonamiento del estudiante. Su complejidad es incluso superior cuando los STIs se aplican a EVs porque las nuevas posibilidades de interacción proporcionadas por estos entornos deben considerarse como nuevos elementos de información clave para el modelado del estudiante, incidiendo en todo el proceso educativo: el camino seguido por el estudiante durante su navegación a través de escenarios 3D; el comportamiento no verbal tal como la dirección de la mirada; nuevos tipos de pistas e instrucciones que el módulo de tutoría puede proporcionar al estudiante; nuevos tipos de preguntas que el estudiante puede formular, etc. Por consiguiente, es necesario que la estructura de los STIs, embebida en el EVIE, se enriquezca con estos aspectos, mientras mantiene una estructura clara, estructurada, y bien definida. La mayoría de las aproximaciones al Modelo del Estudiante en STIs y en IVETs no consideran una taxonomía de posibles conocimientos acerca del estudiante suficientemente completa. Además, la mayoría de ellas sólo tienen validez en ciertos dominios o es difícil su adaptación a diferentes STIs. Para vencer estas limitaciones, hemos propuesto, en el marco de esta tesis doctoral, un nuevo mecanismo de Modelado del Estudiante basado en la Ingeniería Ontológica e inspirado en principios pedagógicos, con un modelo de datos sobre el estudiante amplio y flexible que facilita su adaptación y extensión para diferentes STIs y aplicaciones de aprendizaje, además de un método de diagnóstico con capacidades de razonamiento no monótono. El método de diagnóstico es capaz de inferir el estado de los objetivos de aprendizaje contenidos en el SIT y, a partir de él, el estado de los conocimientos del estudiante durante su proceso de aprendizaje. La aproximación almodelado del estudiante propuesta ha sido implementada e integrada en un agente software (el agente de modelado del estudiante) dentro de una plataforma software existente para el desarrollo de EVIEs denominadaMAEVIF. Esta plataforma ha sido diseñada para ser fácilmente configurable para diferentes aplicaciones de aprendizaje. El modelado del estudiante presentado ha sido implementado e instanciado para dos tipos de entornos de aprendizaje: uno para aprendizaje del uso de interfaces gráficas de usuario en una aplicación software y para un Entorno Virtual para entrenamiento procedimental. Además, se ha desarrollado una metodología para guiar en la aplicación del esta aproximación de modelado del estudiante a cada sistema concreto.---ABSTRACT---Recent technological advances have found a potential field of exploitation in computeraided education. At the end of the 90’s a new research field emerged, the so-called Intelligent Virtual Environments for Training and/or Education (IVETs), which combines two areas of great complexity: Virtual Environments (VE) and Intelligent Tutoring Systems (ITS). In this way, the benefits of 3D environments (simulation of high risk or difficult-to-use environments, etc.) may be combined with those of an ITS (content and presentation customization, adaptation of the tutoring strategy to the student requirements, etc.) in order to provide added value educational/training solutions. The StudentModel, core of an ITS, represents the student’s knowledge and characteristics, and reflects the student’s reasoning process. Its complexity is even higher when the ITSs are applied on VEs because the new interaction possibilities offered by these environments must be considered as new key information pieces for student modelling, impacting all the educational process: the path followed by the student during their navigation through 3D scenarios; non-verbal behavior such as gaze direction; new types of hints or instructions that the tutoring module can provide to the student; new question types that the student can ask, etc. Thus, it is necessary for the ITS structure, which is embedded in the IVET, to be enriched by these aspects, while keeping a clear, structured and well defined architecture. Most approaches to SM on ITSs and IVETs don’t consider a complete enough taxonomy of possible knowledge about the student. In addition, most of them have validity only in certain domains or they are hard to be adapted for different ITSs. In order to overcome these limitations, we have proposed, in the framework of this doctoral research project, a newStudentModeling mechanism that is based onOntological Engineering and inspired on pedagogical principles, with a wide and flexible data model about the student that facilitates its adaptation and extension to different ITSs and learning applications, as well as a rich diagnosis method with non-monotonic reasoning capacities. The diagnosis method is able to infer the state of the learning objectives encompassed by the ITS and, fromit, the student’s knowledge state during the student’s process of learning. The proposed student modelling approach has been implemented and integrated in a software agent (the student modeling agent) within an existing software platform for the development of IVETs called MAEVIF. This platform was designed to be easily configurable for different learning applications. The proposed student modeling has been implemented and it has been instantiated for two types of learning environments: one for learning to use the graphical user interface of a software application and a Virtual Environment for procedural training. In addition, a methodology to guide on the application of this student modeling approach to each specific system has been developed.

UWB Monocycle Generator based on the non-linear effects of an SOA-integrated structure

In this letter, we propose and experimentally demonstrate a novel and single structure to generate ultra-wideband (UWB) pulses by means of the cross-phase modulation present in a semiconductor optical amplifier unified structure. The key components of this system is an integrated Mach-Zehnder interferometer with two semiconductor optical amplifiers and an optical processing unit. The fusion of these two components permits the generation and customization of UWB monocycle pulses. The polarity of the output pulses is easily modified through the single selection of a specific input port. Moreover, the capacity of transmitting several data sequences is demonstrated and the potentiality to adapt the system to different modulation formats is analyzed.

Improving flexible databases searches using machine learning

El objetivo principal de este proyecto ha sido introducir aprendizaje automático en la aplicación FleSe. FleSe es una aplicación web que permite realizar consultas borrosas sobre bases de datos nítidos. Para llevar a cabo esta función la aplicación utiliza unos criterios para definir los conceptos borrosos usados para llevar a cabo las consultas. FleSe además permite que el usuario cambie estas personalizaciones. Es aquí donde introduciremos el aprendizaje automático, de tal manera que los criterios por defecto cambien y aprendan en función de las personalizaciones que van realizando los usuarios. Los objetivos secundarios han sido familiarizarse con el desarrollo y diseño web, al igual que recordar y ampliar el conocimiento sobre lógica borrosa y el lenguaje de programación lógica Ciao-Prolog. A lo largo de la realización del proyecto y sobre todo después del estudio de los resultados se demuestra que la agrupación de los usuarios marca la diferencia con la última versión de la aplicación. Esto se basa en la siguiente idea, podemos usar un algoritmo de aprendizaje automático sobre las personalizaciones de los criterios de todos los usuarios, pero la gran diversidad de opiniones de los usuarios puede llevar al algoritmo a concluir criterios erróneos o no representativos. Para solucionar este problema agrupamos a los usuarios intentando que cada grupo tengan la misma opinión o mismo criterio sobre el concepto. Y después de haber realizado las agrupaciones usar el algoritmo de aprendizaje automático para precisar el criterio por defecto de cada grupo de usuarios. Como posibles mejoras para futuras versiones de la aplicación FleSe sería un mejor control y manejo del ejecutable plserver. Este archivo se encarga de permitir a la aplicación web usar el lenguaje de programación lógica Ciao-Prolog para llevar a cabo la lógica borrosa relacionada con las consultas. Uno de los problemas más importantes que ofrece plserver es que bloquea el hilo de ejecución al intentar cargar un archivo con errores y en caso de ocurrir repetidas veces bloquea todas las peticiones siguientes bloqueando la aplicación. Pensando en los usuarios y posibles clientes, sería también importante permitir que FleSe trabajase con bases de datos de SQL en vez de almacenar la base de datos en los archivos de Prolog. Otra posible mejora basarse en distintas características a la hora de agrupar los usuarios dependiendo de los conceptos borrosos que se van ha utilizar en las consultas. Con esto se conseguiría que para cada concepto borroso, se generasen distintos grupos de usuarios, los cuales tendrían opiniones distintas sobre el concepto en cuestión. Así se generarían criterios por defecto más precisos para cada usuario y cada concepto borroso.---ABSTRACT---The main objective of this project has been to introduce machine learning in the application FleSe. FleSe is a web application that makes fuzzy queries over databases with precise information, using defined criteria to define the fuzzy concepts used by the queries. The application allows the users to change and custom these criteria. On this point is where the machine learning would be introduced, so FleSe learn from every new user customization of the criteria in order to generate a new default value of it. The secondary objectives of this project were get familiar with web development and web design in order to understand the how the application works, as well as refresh and improve the knowledge about fuzzy logic and logic programing. During the realization of the project and after the study of the results, I realized that clustering the users in different groups makes the difference between this new version of the application and the previous. This conclusion follows the next idea, we can use an algorithm to introduce machine learning over the criteria that people have, but the problem is the diversity of opinions and judgements that exists, making impossible to generate a unique correct criteria for all the users. In order to solve this problem, before using the machine learning methods, we cluster the users in order to make groups that have the same opinion, and afterwards, use the machine learning methods to precise the default criteria of each users group. The future improvements that could be important for the next versions of FleSe will be to control better the behaviour of the plserver file, that cost many troubles at the beginning of this project and it also generate important errors in the previous version. The file plserver allows the web application to use Ciao-Prolog, a logic programming language that control and manage all the fuzzy logic. One of the main problems with plserver is that when the user uploads a file with errors, it will block the thread and when this happens multiple times it will start blocking all the requests. Oriented to the customer, would be important as well to allow FleSe to manage and work with SQL databases instead of store the data in the Prolog files. Another possible improvement would that the cluster algorithm would be based on different criteria depending on the fuzzy concepts that the selected Prolog file have. This will generate more meaningful clusters, and therefore, the default criteria offered to the users will be more precise.

La casa industrializada : seis propuestas para este milenio

La Casa Industrializada supone el ideal de realizar la casa unifamiliar a través de la potencia y los procedimientos de la industria. Como tal, la casa supone un producto industrial más sujeto a la lógica de la reproducción y del consumo. Como producto de consumo la casa debe establecerse como objeto de deseo, accesible al grupo de usuarios-consumidores al que va dirigido. El sueño de la Casa Industrializada se origina en la primera Revolución Industrial y se consolida en la segunda tras la producción del Ford T y la adhesión de los padres del movimiento moderno. A lo largo de su historia se han sucedido casos de éxito y fracaso, los primeros con la realización de un producto de imagen convencional y los segundos la mayor parte de las veces dirigidos por arquitectos. El sueño de la Casa Industrializada de la mano de arquitectos está comenzando a ser una realidad en Japón, Suecia y Estados Unidos a través de marcas como MUJI, Arkitekthus y Living Homes, pero aún dista de ser un hecho extendido en nuestra sociedad. Para que este ideal se cumpla deberá ofrecer valores que permita a la sociedad hacerlo suyo. La Tesis busca analizar la historia y la metodología de la Casa Industrializada, desde el diseño a la comercialización con el fin de ofrecer esos valores en forma de propuestas para la Casa Industrializada en este milenio. La casa como producto industrial-producto de consumo supera las lógicas tradicionales de la arquitectura para operar dentro del contexto de la producción industrial y la reproducción de los objetos. En este sentido es necesario establecer no solo la forma y construcción de la casa sino los mecanismos de reproducción con sus pertinentes eficiencias. La Casa industrializada no se construye, se monta, y para ello utiliza las estrategias de la construcción en seco, la prefabricación, el uso de componentes y los materiales ligeros. Desde la lógica del consumo, la casa debe dirigirse a un determinado público, no es más la casa para todos, característica de las situaciones de crisis y de emergencia. La casa se enfrenta a un mercado segmentado, tanto en cultura, como en deseos y poderes adquisitivos. En la cuestión del diseño debe plantearse más como diseño de producto que como diseño arquitectónico. La Casa Industrializada no es el fruto de un encargo y de una acción singular, debe ofrecerse lista para adquirir y para ser reproducida. Esta reproducción se puede dar tanto en la forma de modelos cerrados o sistemas abiertos que permitan la personalización por parte de los usuarios. Desde el ámbito cultural es necesario entender que la casa es más que una máquina de habitar, es un receptor de emociones, forma parte de nuestra memoria y nuestra cultura. La casa como producto social es una imagen de nosotros mismos, define la manera en la que nos situamos en el mundo y por tanto supone una definición de estatus. En esto, la Tesis se apoya en los textos de Baudrillard y su análisis de la sociedad de consumo y el papel de los objetos y su valor como signo. La Tesis realiza un repaso de los procedimientos industriales con especial énfasis en la producción automovilística y sitúa la evolución de la Casa Industrializada en relación a la evolución de los avances en los sistemas de producción industrial y las transferencias desde las industrias del automóvil y aeronáutica. La tesis se completa con una serie de casos de estudio que parten de las primeras casas de venta por correo de principios del siglo XX, pasando por las propuestas de Gropius, Fuller, el Case Study House Program, Prouvé, Sota y acaban con la situación actual. La Casa Industrializada ha mantenido una serie de valores a lo largo de su historia, como ideal, forma un cuerpo estable de propuestas que no se ha modificado a lo largo del tiempo. Con respecto a este nuevo milenio este ideal no debe ser cambiado sino simplemente actualizado y adaptado a los métodos de producción y las necesidades, sueños y exigencias de la sociedad de hoy. ABSTRACT The industrialized House provides an ideal to manufacture the house through the power and strategies of the industry. As such, the house becomes an industrial product that respond to the logic of reproduction and consumption. As a comodity, the house must become a desirable object, accessible to the group of the consumers to which is targeted The dream of the Industrialized home is originated in the First Industrial Revolution and it is consolidated in the second one after Ford´s production of Model T and the incorporation of the principal figures of the modern movement to the ideal of making houses at the factories. Throughout history there have been cases of success and failure, the first with the completion of a product of conventional image and the second most often led by architects. Industrialized dream house made by architects is starting to become a reality in Japan, Sweden and the United States through brands such as MUJI, Arkitekthus and Living Homes, but still far from beeing a widespread fact in our society. To fulfill this ideal, it should provide values that society could accept as of their own. The Thesis seeks to analyze the history and methodology of industrialized house, from design to marketing in order to offer these values in the form of proposals for industrialized house in this millennium. The house as an industrial-product-comodity extend beyond the traditional architectural logic to operate within the context of industrial production and the reproduction of objects. In this sense it is necessary to establish not only the shape and construction of the house but the mechanisms of reproduction with its relevant efficiencies. Industrialized house is not built it is assembled, and it uses the strategies of dry construction, prefabrication, using lightweight materials and components. From the logic of consumption, the house must go to a certain audience, it is no longer the home for all that is characteristic of crisis respond and emergency. The house faces a segmented market, both in culture and desires and purchasing power. On the question of design it must be considered more like product design than architectural design. Industrialized House is not the result of a commission and a singular action, it should be offered pret-a-porter and able to be reproduced. This reproduction can be given in form of closed or open systems models that allow its customization by users. From the cultural sphere is necessary to understand that the house is more than a machine for living, is a recipient of emotions, is part of our memory and our culture. The home as a social product is an image of ourselves, defines the way in which we place ourselves in the world and therefore represents a definition of status. In this aspect, the thesis is based on the texts of Baudrillard and his analysis of consumption society and the role of objects and its value as a sign in it. The thesis makes a review of the industrial processes with emphasis on automotive production and places the evolution of industrialized House in relation to the evolution of developments in industrial production systems and transfers from the automotive and aeronautics industries. The thesis is completed with a series of case studies that starts from the first mail order houses from the early twentieth century, going through the proposal of Gropius, Fuller, the Case Study House Program, Prouvé, Sota and end up with the current situation. Industrialized House has held a series of values throughout its history, as an ideal, forms a stable corps of proposals that has not changed over time. Regarding this new millennium this ideal should not be changed but simply be updated and adapted to production methods and needs, dreams and demands of today's society.

Customizing for clients: developing a library liaison program from need to plan*

Building on the experiences of librarian representatives to curriculum committees in the colleges of dentistry, medicine, and nursing, the Health Science Center Libraries (HSCL) Strategic Plan recommended the formation of a Library Liaison Work Group to create a formal Library Liaison Program to serve the six Health Science Center (HSC) colleges and several affiliated centers and institutes. The work group's charge was to define the purpose and scope of the program, identify models of best practice, and recommend activities for liaisons. The work group gathered background information, performed an environmental scan, and developed a philosophy statement, a program of liaison activities focusing on seven |primary areas, and a forum for liaison communication. Hallmarks of the plan included intensive subject specialization (beyond collection development), extensive communication with users, and personal information services. Specialization was expected to promote competence, communication, confidence, comfort, and customization. Development of the program required close coordination with other strategic plan implementation teams, including teams for collection development, education, and marketing. This paper discusses the HSCL's planning process and the resulting Library Liaison Program. Although focusing on an academic health center, the planning process and liaison model may be applied to any library serving diverse, subject-specific user populations.

Filtros na rede: das relações entre discurso e tecnologia

A fim de refletirmos sobre as condições de produção na contemporaneidade, propomos discussões e análises em torno do funcionamento dos recursos de personalização de conteúdos na Internet que impõem filtros aos usuários. Para isso, mobilizamos a teoria de Análise do Discurso de linha francesa, sobretudo a partir dos trabalhos de Michel Pêcheux. Delimitamos a observação do funcionamento de tais recursos no mecanismo de busca do Google, uma vez que ele representa uma das maiores corporações na Internet e detém a maior parte do mercado de buscas. A partir dessa delimitação, selecionamos o corpus de análise oriundo da política de privacidade do buscador, de definições dadas pela empresa sobre o funcionamento de tais recursos e de relatos sobre esse funcionamento postados por usuários e disseminados na rede. Acreditamos que a análise do funcionamento dessas técnicas nos dizem sobre as condições de produção do discurso na contemporaneidade, bem como das materialidades discursivas que lhes são peculiares, compreendendo que é pela influência materialista que se chega, na Análise do Discurso, a noção de materialidade discursiva. Temos, dessa forma, contemplada uma discussão sobre história, sujeito e língua que fundamenta o funcionamento da ideologia. Ainda nesse ínterim, propomos pensar o discurso ressaltando o que concerne à memória, bem como as questões que decorrem ao considerarmos seu funcionamento perpassado pelas Tecnologias de Informação e Comunicação (TIC\'s), o que nos move a refletir sobre o discurso eletrônico e a memória metálica. Tudo isso nos mostra os efeitos discursivos dos filtros que giram em torno do controle na rede, característica que tem marcado as relações de poder no cenário atual.

Colaboração e cooperação entre sistemas produtivos dispersos de empresas virtuais.

No mercado global e digital, as empresas são desafiadas a encontrar caminhos inovadores para atender o aumento da pressão -competitiva. A competição é uma das formas de interação das organizações, além da colaboração e da cooperação. A cooperação e a colaboração apresentam formas de produzir conjuntamente aumentando o potencial de atendimento das empresas. Os desafios mais encontrados no mercado são: reduzir os custos, sempre assegurar qualidade e personalizar os produtos e serviços. Um fenômeno de negócios comum hoje é a terceirização da manufatura e da logística para fornecedores domésticos e estrangeiros e provedores de serviços. Essa terceirização provoca, intrinsecamente, um espalhamento geográfico da produção em novos centros que oferecem vantagens nos recursos energéticos, matérias primas e centros de produção de conhecimento. Essa terceirização pode ser realizada também nas formas de colaboração e cooperação. Para isso, as empresas necessitam estabelecer uma forma de confiança entre si. No conceito de empresa virtual, a confiança é amplamente discutida para atingir uma colaboração e/ou cooperação entre empresas. O objetivo deste trabalho é propor e modelar uma ferramenta que atenda as necessidades das empresas para colaboração e/ou cooperação entre elas, considerando suas necessidades de confiança. As empresas aqui são vistas como sistemas produtivos, com suas camadas de gerenciamento de negócios, de acordo com o padrão ANSI/ISA 95. Além disso, um tipo de interpretação da rede de Petri, chamada de rede de Petri produtiva é introduzida como ferramenta para descrever o processo produtivo realizado pelas empresas na forma de workflow. A modelagem dessa arquitetura do sistema produtivo utiliza técnicas de sistemas distribuídos, como a arquitetura orientada a serviços. Além disso, um dos enfoques é das necessidades para o desenvolvimento de novos produtos, que envolve o desafio de personalização. Testes foram realizados para avaliar a proposta de workflow com pessoas de diferentes níveis de conhecimento sobre os processos, sejam de manufatura, sejam de outras áreas. Já a arquitetura proposta foi submetida a um estudo analítico das hipóteses levantadas no ambiente colaborativo.

Augmented and Virtual Reality techniques for footwear

The use of 3D imaging techniques has been early adopted in the footwear industry. In particular, 3D imaging could be used to aid commerce and improve the quality and sales of shoes. Footwear customization is an added value aimed not only to improve product quality, but also consumer comfort. Moreover, customisation implies a new business model that avoids the competition of mass production coming from new manufacturers settled mainly in Asian countries. However, footwear customisation implies a significant effort at different levels. In manufacturing, rapid and virtual prototyping is required; indeed the prototype is intended to become the final product. The whole design procedure must be validated using exclusively virtual techniques to ensure the feasibility of this process, since physical prototypes should be avoided. With regard to commerce, it would be desirable for the consumer to choose any model of shoes from a large 3D database and be able to try them on looking at a magic mirror. This would probably reduce costs and increase sales, since shops would not require storing every shoe model and the process of trying several models on would be easier and faster for the consumer. In this paper, new advances in 3D techniques coming from experience in cinema, TV and games are successfully applied to footwear. Firstly, the characteristics of a high-quality stereoscopic vision system for footwear are presented. Secondly, a system for the interaction with virtual footwear models based on 3D gloves is detailed. Finally, an augmented reality system (magic mirror) is presented, which is implemented with low-cost computational elements that allow a hypothetical customer to check in real time the goodness of a given virtual footwear model from an aesthetical point of view.

Towards moldable development tools

Developers commonly ask detailed and domain-specific questions about the software systems they are developing and maintaining. Integrated development environments (IDEs) form an essential category of tools for developing software that should support software engineering decision making. Unfortunately, rigid and generic IDEs that focus on low-level programming tasks, that promote code rather than data, and that suppress customization, offer limited support for informed decision making during software development. We propose to improve decision making within IDEs by moving from generic to context-aware IDEs through moldable tools. In this paper, we promote the idea of moldable tools, illustrate it with concrete examples, and discuss future research directions.

Operational capabilities’ typology: an evolution from operational practices

Operational capabilities são caracterizadas como um recurso interno da firma e fonte de vantagem competitiva. Porém, a literatura de estratégia de operações fornece uma definição constitutiva inadequada para as operational capabilities, desconsiderando a relativização dos diferentes contextos, a limitação da base empírica, e não explorando adequadamente a extensa literatura sobre práticas operacionais. Quando as práticas operacionais são operacionalizadas no ambiente interno da firma, elas podem ser incorporadas as rotinas organizacionais, e através do conhecimento tácito da produção se transformar em operational capabilities, criando assim barreiras à imitação. Apesar disso, poucos são os pesquisadores que exploram as práticas operacionais como antecedentes das operational capabilities. Baseado na revisão da literatura, nós investigamos a natureza das operational capabilities; a relação entre práticas operacionais e operational capabilities; os tipos de operational capabilities que são caracterizadas no ambiente interno da firma; e o impacto das operational capabilities no desempenho operacional. Nós conduzimos uma pesquisa de método misto. Na etapa qualitativa, nós conduzimos estudos de casos múltiplos com quatro firmas, duas multinacionais americanas que operam no Brasil, e duas firmas brasileiras. Nós coletamos os dados através de entrevistas semi-estruturadas com questões semi-abertas. Elas foram baseadas na revisão da literatura sobre práticas operacionais e operational capabilities. As entrevistas foram conduzidas pessoalmente. No total 73 entrevistas foram realizadas (21 no primeiro caso, 18 no segundo caso, 18 no terceiro caso, e 16 no quarto caso). Todas as entrevistas foram gravadas e transcritas literalmente. Nós usamos o sotware NVivo. Na etapa quantitativa, nossa amostra foi composta por 206 firmas. O questionário foi criado a partir de uma extensa revisão da literatura e também a partir dos resultados da fase qualitativa. O método Q-sort foi realizado. Um pré-teste foi conduzido com gerentes de produção. Foram realizadas medidas para reduzir Variância de Método Comum. No total dez escalas foram utilizadas. 1) Melhoria Contínua; 2) Gerenciamento da Informação; 3) Aprendizagem; 4) Suporte ao Cliente; 5) Inovação; 6) Eficiência Operacional; 7) Flexibilidade; 8) Customização; 9) Gerenciamento dos Fornecedores; e 10) Desempenho Operacional. Nós usamos análise fatorial confirmatória para confirmar a validade de confiabilidade, conteúdo, convergente, e discriminante. Os dados foram analisados com o uso de regressões múltiplas. Nossos principais resultados foram: Primeiro, a relação das práticas operacionais como antecedentes das operational capabilities. Segundo, a criação de uma tipologia dividida em dois construtos. O primeiro construto foi chamado de Standalone Capabilities. O grupo consiste de zero order capabilities tais como Suporte ao Cliente, Inovação, Eficiência Operacional, Flexibilidade, e Gerenciamento dos Fornecedores. Estas operational capabilities têm por objetivo melhorar os processos da firma. Elas têm uma relação direta com desempenho operacional. O segundo construto foi chamado de Across-the-Board Capabilities. Ele é composto por first order capabilities tais como Aprendizagem Contínua e Gerenciamento da Informação. Estas operational capabilities são consideradas dinâmicas e possuem o papel de reconfigurar as Standalone Capabilities.

Entrepreneurship and resource based view: a teaching case study at Mundo Verde

This case study is based in Mundo Verde, a Brazilian natural products company, and its focused on the strategic decisions the company has to make to overcome the current problems. The case is built around three major theoretical perspectives: Competitive advantages from a Resource Based View, Brand Identity and Entrepreneurship. In the case is presented first the company, disclosing the necessary information to analyze and comprehend Mundo Verde, by accurately identifying the company´s competitive advantages. Next the student is presented to a narrative where the CEO of the company meets one of the franchisees in an attempt to find out more about the company´s issues and to see how the stores are working. Several scenarios are presented to the students which represent several possibilities of action, considering the company, the problems to be addressed and the objectives of the company.

Making Space: Feasibility of Urban Manufacturing through Shared Resources

Thesis (Master's)--University of Washington, 2016-06

The design and implementation of a repository for the management of spatial data integrity constraints

This paper reviews the key features of an environment to support domain users in spatial information system (SIS) development. It presents a full design and prototype implementation of a repository system for the storage and management of metadata, focusing on a subset of spatial data integrity constraint classes. The system is designed to support spatial system development and customization by users within the domain that the system will operate.