Nucleation and growth of metamorphic minerals in contact aureoles

THESIS ABSTRACT Nucleation and growth of metamorphic minerals are the consequence of changing P-T-X-conditions. The thesis presented here focuses on processes governing nucleation and growth of minerals in contact metamorphic environments using a combination of geochemical analytics (chemical-, isotope-, and trace element composition), statistical treatments of spatial data, and numerical models. It is shown, that a combination of textural modeling and stable isotope analysis allows a distinction between several possible reaction paths for olivine growth in a siliceous dolomite contact aureole. It is suggested that olivine forms directly from dolomite and quartz. The formation of olivine from this metastable reaction implies metamorphic crystallization far from equilibrium. As a major consequence, the spatial distribution of metamorphic mineral assemblages in a contact aureole cannot be interpreted as a proxy for the temporal evolution of a single rock specimen, because each rock undergoes a different reaction path, depending on temperature, heating rate, and fluid-infiltration rate. A detailed calcite-dolomite thermometry study was initiated on multiple scales ranging from aureole scale to the size of individual crystals. Quantitative forward models were developed to evaluate the effect of growth zoning, volume diffusion and the formation of submicroscopic exsolution lamellae (<1 µm) on the measured Mg-distribution in individual calcite crystals and compare the modeling results to field data. This study concludes that Mg-distributions in calcite grains of the Ubehebe Peak contact aureole are the consequence of rapid crystal growth in combination with diffusion and exsolution. The crystallization history of a rock is recorded in the chemical composition, the size and the distribution of its minerals. Near the Cima Uzza summit, located in the southern Adamello massif (Italy), contact metamorphic brucite bearing dolomite marbles are exposed as xenoliths surrounded by mafic intrusive rocks. Brucite is formed retrograde pseudomorphing spherical periclase crystals. Crystal size distributions (CSD's) of brucite pseudomorphs are presented for two profiles and combined with geochemistry data and petrological information. Textural analyses are combined with geochemistry data in a qualitative model that describes the formation periclase. As a major outcome, this expands the potential use of CSD's to systems of mineral formation driven by fluid-infiltration. RESUME DE LA THESE La nucléation et la croissance des minéraux métamorphiques sont la conséquence de changements des conditions de pression, température et composition chimique du système (PT-X). Cette thèse s'intéresse aux processus gouvernant la nucléation et la croissance des minéraux au cours d'un épisode de métamorphisme de contact, en utilisant la géochimie analytique (composition chimique, isotopique et en éléments traces), le traitement statistique des données spatiales et la modélisation numérique. Il est montré que la combinaison d'un modèle textural avec des analyses en isotopes stables permet de distinguer plusieurs chemins de réactions possibles conduisant à la croissance de l'olivine dans une auréole de contact riche en Silice et dolomite. Il est suggéré que l'olivine se forme directement à partir de la dolomie et du quartz. Cette réaction métastable de formation de l'olivine implique une cristallisation métamorphique loin de l'équilibre. La principale conséquence est que la distribution spatiale des assemblages de minéraux métamorphiques dans une auréole de contact ne peut pas être considérée comme un témoin de l'évolution temporelle d'un type de roche donné, puisque chaque type de roche suit différents chemins de réactions, en fonction de la température, la vitesse de réchauffement et le taux d'infiltration du fluide. Une étude thermométrique calcite-dolomite détaillée a été réalisée à diverses échelles, depuis l'échelle de l'auréole de contact jusqu'à l'échelle du cristal. Des modèles numériques quantitatifs ont été développés pour évaluer l'effet des zonations de croissance, de la diffusion volumique et de la formation de lamelles d'exsolution submicroscopiques (<1µm) sur la distribution du magnésium mesuré dans des cristaux de calcite individuels. Les résultats de ce modèle ont été comparés ä des échantillons naturels. Cette étude montre que la distribution du Mg dans les grains de calcite de l'auréole de contact de l'Ubehebe Peak (USA) résulte d'une croissance cristalline rapide, associée aux processus de diffusion et d'exsolution. L'histoire de cristallisation d'une roche est enregistrée dans la composition chimique, la taille et la distribution de ses minéraux. Près du sommet Cima Uzza situé au sud du massif d'Adamello (Italie), des marbres dolomitiques à brucite du métamorphisme de contact forment des xénolithes dans une intrusion mafique. La brucite constitue des pseudomorphes rétrogrades du périclase. Les distributions de taille des cristaux (CSD) des pseudomorphes de brucite sont présentées pour deux profiles et sont combinées aux données géochimiques et pétrologiques. Les analyses textorales sont combinées aux données géochimiques dans un modèle qualitatif qui décrit la formation du périclase. Ceci élargit l'utilisation potentielle de la C5D aux systèmes de formation de minéraux controlés par les infiltrations fluides. THESIS ABSTRACT (GENERAL PUBLIC) Rock textures are essentially the result of a complex interaction of nucleation, growth and deformation as a function of changing physical conditions such as pressure and temperature. Igneous and metamorphic textures are especially attractive to study the different mechanisms of texture formation since most of the parameters like pressure-temperature-paths are quite well known for a variety of geological settings. The fact that textures are supposed to record the crystallization history of a rock traditionally allowed them to be used for geothermobarometry or dating. During the last decades the focus of metamorphic petrology changed from a static point of view, i.e. the representation of a texture as one single point in the petrogenetic grid towards a more dynamic view, where multiple metamorphic processes govern the texture formation, including non-equilibrium processes. This thesis tries to advance our understanding on the processes governing nucleation and growth of minerals in contact metamorphic environments and their dynamic interplay by using a combination of geochemical analyses (chemical-, isotope-, and trace element composition), statistical treatments of spatial data and numerical models. In a first part the thesis describes the formation of metamorphic olivine porphyroblast in the Ubehebe Peak contact aureole (USA). It is shown that not the commonly assumed succession of equilibrium reactions along a T-t-path formed the textures present in the rocks today, but rather the presence of a meta-stable reaction is responsible for forming the olivine porphyroblast. Consequently, the spatial distribution of metamorphic minerals within a contact aureole can no longer be regarded as a proxy for the temporal evolution of a single rock sample. Metamorphic peak temperatures for samples of the Ubehebe Peak contact aureole were determined using calcite-dolomite. This geothermometer is based on the temperature-dependent exchange of Mg between calcite and dolomite. The purpose of the second part of this thesis was to explain the interfering systematic scatter of measured Mg-content on different scales and thus to clarify the interpretation of metamorphic temperatures recorded in carbonates. Numerical quantitative forward models are used to evaluate the effect of several processes on the distribution of magnesium in individual calcite crystals and the modeling results were then compared to measured field. Information about the crystallization history is not only recorded in the chemical composition of grains, like isotope composition or mineral zoning. Crystal size distributions (CSD's) provide essential information about the complex interaction of nucleation and growth of minerals. CSD's of brucite pseudomorphs formed retrograde after periclase of the southern Adamello massif (Italy) are presented. A combination of the textural 3D-information with geochemistry data is then used to evaluate reaction kinetics and to constrain the actual reaction mechanism for the formation of periclase. The reaction is shown to be the consequence of the infiltration of a limited amount of a fluid phase at high temperatures. The composition of this fluid phase is in large disequilibrium with the rest of the rock resulting in very fast reaction rates. RESUME DE LA THESE POUR LE GRAND PUBLIC: La texture d'une roche résulte de l'interaction complexe entre les processus de nucléation, croissance et déformation, en fonction des variations de conditions physiques telles que la pression et la température. Les textures ignées et métamorphiques présentent un intérêt particulier pour l'étude des différents mécanismes à l'origine de ces textures, puisque la plupart des paramètres comme les chemin pression-température sont relativement bien contraints dans la plupart des environnements géologiques. Le fait que les textures soient supposées enregistrer l'histoire de cristallisation des roches permet leur utilisation pour la datation et la géothermobarométrie. Durant les dernières décennies, la recherche en pétrologie métamorphique a évolué depuis une visualisation statique, c'est-à-dire qu'une texture donnée correspondait à un point unique de la grille pétrogénétique, jusqu'à une visualisation plus dynamique, où les multiples processus métamorphiques qui gouvernent 1a formation d'une texture incluent des processus hors équilibre. Cette thèse a pour but d'améliorer les connaissances actuelles sur les processus gouvernant la nucléation et la croissance des minéraux lors d'épisodes de métamorphisme de contact et l'interaction dynamique existant entre nucléation et croissance. Pour cela, les analyses géochimiques (compositions chimiques en éléments majeurs et traces et composition isotopique), le traitement statistique des données spatiales et la modélisation numérique ont été combinés. Dans la première partie, cette thèse décrit la formation de porphyroblastes d'olivine métamorphique dans l'auréole de contact de l'Ubehebe Peak (USA). Il est montré que la succession généralement admise des réactions d'équilibre le long d'un chemin T-t ne peut pas expliquer les textures présentes dans les roches aujourd'hui. Cette thèse montre qu'il s'agirait plutôt d'une réaction métastable qui soit responsable de la formation des porphyroblastes d'olivine. En conséquence, la distribution spatiale des minéraux métamorphiques dans l'auréole de contact ne peut plus être interprétée comme le témoin de l'évolution temporelle d'un échantillon unique de roche. Les pics de température des échantillons de l'auréole de contact de l'Ubehebe Peak ont été déterminés grâce au géothermomètre calcite-dolomite. Celui-ci est basé sur l'échange du magnésium entre la calcite et la dolomite, qui est fonction de la température. Le but de la deuxième partie de cette thèse est d'expliquer la dispersion systématique de la composition en magnésium à différentes échelles, et ainsi d'améliorer l'interprétation des températures du métamorphisme enregistrées dans les carbonates. Des modèles numériques quantitatifs ont permis d'évaluer le rôle de différents processus sur la distribution du magnésium dans des cristaux de calcite individuels. Les résultats des modèles ont été comparés aux échantillons naturels. La composition chimique des grains, comme la composition isotopique ou la zonation minérale, n'est pas le seul témoin de l'histoire de la cristallisation. La distribution de la taille des cristaux (CSD) fournit des informations essentielles sur les interactions entre nucléation et croissance des minéraux. La CSD des pseudomorphes de brucite retrograde formés après le périclase dans le sud du massif Adamello (Italie) est présentée dans la troisième partie. La combinaison entre les données textorales en trois dimensions et les données géochimiques a permis d'évaluer les cinétiques de réaction et de contraindre les mécanismes conduisant à la formation du périclase. Cette réaction est présentée comme étant la conséquence de l'infiltration d'une quantité limitée d'une phase fluide à haute température. La composition de cette phase fluide est en grand déséquilibre avec le reste de la roche, ce qui permet des cinétiques de réactions très rapides.

Improving Transition Outcomes: CASE (Career And Self Awareness) Prototype: Contact Information

Contact information for the CASE (Career And Self Awareness) prototype.

Late Proterozoic thrust tectonics, high-pressure metamorphism and Uranium mineralization in the domes area, Lufilian arc, northwestern Zambia

The following main lithostratigraphic units have been distinguished in the Domes Area. The Kibaran basement complex composed of gneisses, migmatites with amphibolite bands and metagranites is exposed in dome structures; metamorphic features of Kibaran age have been almost completely obliterated by extensive Lufilian reactivation. The post-Kibaran cover sequence is subdivided into the Lower Roan Group consisting of well-preserved quartzites with high Mg content, talc-bearing, extremely foliated schists intercalated with pseudo-conglomerates of tectonic origin and the Upper Roan Group including dolomitic marbles with rare stromatolites, metapelites and a sequence of detrital metasediments, with local volcano-sedimentary components and interlayered banded ironstones. The sediments of the Lower Roan Group are interpreted as continental to lagoonal-evaporitic deposits partly converted into the talc-kyanite + garnet assemblage characteristic of ``white schists''. The dolomites and metapelites of the Upper Roan Group are attributed to a carbonate platform sequence progressively subsiding under terrigenous deposits, whilst the detrital metasediments and BIF may be interpreted as a basinal sequence, probably deposited on oceanic crust grading laterally into marbles. Metagabbros and metabasalts are considered as remnants of an ocean-floor-type crustal unit probably related to small basins. Alkaline stocks of Silurian age intruded the post-Kibaran cover. Significant ancestral tectonic discontinuities promoted the development of a nappe pile that underwent high-pressure metamorphism during the Lufilian orogeny and all lithostratigraphic units. Rb-Sr and K-Ar and U-Pb data indicate an age of 700 Ma for the highest grade metamorphism and 500 Ma for blocking of the K-Ar and Rb-Sr system in micas, corresponding to the time when the temperature dropped below 350-degrees-400-degrees-C and to an age of about 400 Ma for the emplacement of hypabyssal syenitic bodies. A first phase of crustal shortening by decoupling of basement and cover slices along shallow shear zones has been recognized. Fluid-rich tectonic slabs of cover sediments were thus able to transport fluids into the anhydrous metamorphic basement or mafic units. During the subsequent metamorphic re-equilibration stage of high pressure, pre-existing thrusts horizons were converted into recrystallized mylonites. Due to uplift, rocks were re-equilibrated into assemblages compatible with lower pressures and slightly lower temperatures. This stage occurs under a decompressional (nearly adiabatic) regime, with P(fluid) almost-equal-to P(lithostatic). It is accompanied by metasomatic development of minerals, activated by injection of hot fluids. New or reactivated shear zones and mylonitic belts were the preferred conduits of fluids. The most evident regional-scale effect of these processes is the intense metasomatic scapolitization of formerly plagioclase-rich lithologies. Uraninite mineralization can probably be assigned to the beginning of the decompressional stage. A third regional deformation phase characterized by open folds and local foliation is not accompanied by significant growth of new minerals. However, pitchblende mineralization can be ascribed to this phase as late-stage, short-range remobilization of previously existing deposits. Finally, shallow alkaline massifs were emplaced when the level of the Domes Area now exposed was already subjected to exchange with meteoric circuits, activated by residual geothermal gradients generally related to intrusions or rifting. Most of the superficial U-showings with U-oxidation products were probably generated during this relatively recent phase.

Multimarket contact in pharmaceutical markets

We analyze the effect of multimarket contact on the pricing behavior of pharmaceutical firms controlling for different levels of regulatory constraints using the IMS MIDAS database for the industry. Theoretically, under product differentiation, firms may find it profitable to allocate their market power among markets where they are operating, specifically from more collusive to more competitive ones. We present evidence for nine OECD countries suggesting the existence of a multimarket effect for more market friendly countries (U.S. and Canada) and less regulated ones (U.K., Germany, Netherlands), while the results are more unstable for highly regulated countries with some countries being consistent with the theory (France) while others contradicting it (Japan, Italy and Spain). A key result indicates thatin the latter countries, price constraints are so intense, that there is little room for allocating market power. Thus equilibrium prices are expected in general to be lower in regulated countries.

Multi-stage garnet in the internal Brianconnais basement (Ambin massif, Savoy): New petrological constraints on the blueschist-facies metamorphism in the Western Alps and tectonic implications

Three types of garnet have been distinguished in pelitic schists from an epidote-blueschist-facies unit of the Ambin and South Vanoise Brianconnais massifs on the basis of texture, chemical zoning and mineral inclusion characterization. Type-1 garnet cores with high Mn/Ca ratios are interpreted as pre-Alpine relicts, whereas Type-1 garnet rims, Type-2 inclusion-rich porphyroblasts and smaller Type-3 garnets are Alpine. The latter are all characterized by low Mn/Ca ratios and a coexisting mineral assemblage of blue amphibole, high-Si phengite, epidote and quartz. Prograde growth conditions during Alpine D-1 high-pressure (HP) metamorphism are recorded by a decrease in Mn and increase in Fe (+/-Ca) in the Type-2 garnets, culminating in peak P-T conditions of 14-16 kbar and 500degreesC in the deepest parts of the Ambin dome. The multistage growth history of Type-1 garnets indicates a polymetamorphic history for the Ambin and South Vanoise massifs; unfortunately, no age constraints are available. The new metamorphic constraints on the Alpine event in the massifs define a metamorphic T `gap' between them and their surrounding cover (Brianconnais and upper Schistes Lustres units), which experienced metamorphism only in the stability field of carpholite-lawsonite (T < 400degreesC). These data and supporting structural studies confirm that the Ambin and South Vanoise massifs are slices of `eclogitized' continental crust tectonically extruded within the Schistes Lustres units and Brianconnais covers. The corresponding tectonic contacts with top-to-east movement are responsible for the juxtaposition of lower-grade metamorphic units on the Ambin and South Vanoise massifs.

Tertiary Himalayan structures and metamorphism in the Kulu Valley (Mandi-Khoksar transect of the Western Himalaya) - Shikar-Beh-nappe and crystalline nappe

The Crystalline Nappe of the High Himalayan Crystalline has been examined along the Kulu Valley and its vicinity (Mandi-Khoksar transect). This nappe was believed to have undergone deformation related only to its transport towards the SW essentially during the `'Main Central Thrust event''. New data has led to the conclusion that during the Himalayan orogeny, two distinctive phases, related to two opposite transport directions, characterize the evolution of this part of the chain, before the creation of the late NE-vergent backfolding. The first phase corresponds to an early NE-vergent folding and thrusting, creating the Tandi Syncline and the NE-oriented Shikar Beh Nappe stack, with a displacement amplitude of about 50 km. Two schistosities, together with a strong stretching lineation are developed at a deep tectonic level under amphibolite facies conditions (kyanite-staurolite-garnet-two mica schists). At a higher tectonic level and in the southern part of the section (Tandy Syncline and southern Kulu Valley between Kulu and Mandi) one or two schistosities are developed in the greenschist facies grade rocks (garnet-biotite and biotite schists). These structures and the associated Barrovian type metamorphism are all related to the NE-verging Shikar Beh Nappe. The creation of the NE-verging Shikar Beh Nappe may be explained by the reactivation of a SW dipping listric normal fault of the N Indian flexural passive margin, during the early stages of the Himalayan orogeny. In the second phase, the still hot metamorphic rocks of the Shikar Beh Nappe were folded and thrust towards the SW (mainly along the MBT and the MCT with a displacement in excess of 100 km) onto the cold, low-grade metamorphic rocks of the Larji-Kulu-Rampur Window or, near Mandi, on the non-metamorphic sandstones of the Ganges Molasse (Siwaliks). Sense of shear criteria and a strong NE-SW stretching-lineation indicate that the Crystalline Nappe has been overthrusted towards the SW. Thermometry on synkinematically crystallised garnet-biotite and garnet-hornblende pairs reveals the lower amphibolite facies temperature conditions related to the Crystalline Nappe formation. From the muscovite and biotite Rb-Sr cooling ages, the Shikar Beh Nappe emplacement occurred before 32 Ma and the southwestward thrusting of the Crystalline Nappe began before 21 Ma. Our model involving two opposite directions of thrusting goes against the conventional idea of only one main SW-oriented transport direction in the High Himalayan Crystalline Nappes.

Low-grade metamorphism of the Gets nappe (Western Alps)

The Gets nappe, a decollement cover nappe located at the top of the Prealps, is characterized by the occurrence of ophiolitic rocks. The metamorphic grade in the Gets nappe was determined using illite crystallinity and clay mineral assemblages. Samples from the same locality were analyzed to estimate variations in illite crystallinity values and in the parageneses of clay minerals, both in sedimentary elements of a breccia and in the embedding shaly flysch. For samples from one and the same locality, the range in illite crystallinity data between breccia elements and the shaly flysch is comparable to the variation between different shaly beds. Two S-N transects along the Gets nappe reveal the same metamorphic gradient, with the internal parts of the nappe being characterized by middle anchizonal metamorphism and the external parts showing diagenetic conditions. The metamorphic grade is higher within the Gets nappe than in its hangingwall (i.e. the Breche and Simme nappes), suggesting that the metamorphism in the Gets unit is transported. The timing and conditions of thrusting of the Gets Nappe onto the Br che and the Simme nappes is constrained by stratigraphic and metamorphic data.

Effect of tibial tray inclination on the femoro-tibial contact pattern of a mobile total knee arthroplasty

Introduction: The posterior inclination of the tibial component is an important factor that can affect the success of total knee arthroplasty. It can reduce the posterior impingement and thus increase the range of flexion, but it may also induce instability in flexion, anterior impingement between the polyethylene of postero-stabilizing knee prosthesis, and anterior conflict with the cortical bone and the stem. Although the problem is identified, there is still a debate on the ideal inclination angle and the surgical technique to avoid an excessive posterior inclination. The aim of this study was to predict the effect of a posterior inclination of the tibial component on the contact pattern on the tibial insert, using a numerical musculoskeletal model of the knee joint. Methods: A 3D finite element model of the knee joint was developed to simulate an active and loaded squat movement after total knee arthroplasty. Flexion was actively controlled by the quadriceps muscle and muscle activations were estimated from EMG data and were synchronized by a feedback algorithm. Two inclinations of the tibial tray were considered: a posterior inclination of 0° or 10°. During the entire range of flexion, the following quantities were calculated: the tibiofemoral and patello-femoral contact force, and the contact pattern on polyethylene insert. The antero-posterior displacement of the contact pattern was also measured. Abaqus 6.7 was used for all analyses. Results: The tibio-femoral and patello-femoral contact forces increased during flexion and reached respectively 4 and 7 BW (bodyweight) at 90° of flexion. They were slightly affected by the inclination of the tibial tray. Without posterior inclination, the contact pattern on the tibial insert remained centered. The contact pressure was lower than 5 MPa below 60° of flexion, but exceeded 20 MPa at 90° of flexion. The posterior inclination displaced the contact point posteriorly by 2 to 4 mm. Conclusion: The inclination of the tibial tray displaced the contactpattern towards the posterior border of the tibial insert. However, even for 10° of inclination, the contact center remained far from the posterior border (12 mm). There was no instability predicted for this movement.

Mineralogical, K-Ar, stable and Sr isotope systematics of K-white micas during very low-grade metamorphism of limestones (Helvetic nappes, Western Switzerland)

Mineralogical, K-Ar, Rb-Sr and stable isotope analyses have been carried out on K-white micas from Helvetic Malm limestones in order to examine their evolution during very low- to low-grade Alpine metamorphism, associated with intense ductile deformation. Metamorphic temperatures were estimated al approximately 300-degrees-C from stable isotopes (quartz-calcite thermometry), occurrence of chloritoid, and `'epizonal'' illite crystallinity index. K-white micas consist of variable mixtures of 2M, phengite and muscovite, as revealed by detailed X-ray diffraction analyses using peak decomposition of the (060, 331) spectra. K-Ar apparent ages display a strong grain-size dependence in which mainly fine-grained size fractions (< 2 mum) record Alpine ages (37-15 Ma). However, these ages provide a relative rather than an absolute chronology of the diachronous Alpine metamorphic evolution of the Helvetic nappes. The resetting of the K-Ar isotopic system of K-white micas to Alpine metamorphic conditions reflects an apparent combination of crystallization/recrystallization and radiogenic Ar-40 diffusion loss. The oxygen isotope compositions of micas (+ 15 to + 22 parts per thousand) are intermediate between detrital and O-18-enriched values expected for micas neoformed within an abundant marine carbonate matrix. No isotopic equilibrium has been reached between calcite and micas. The variable depletion of hydrogen isotope compositions (- 126 to - 82 parts per thousand) is influenced by the interaction with organic matter under closed-system conditions. Organic matter, if not removed, may also represent a serious source of error in K-Ar age determination, by introducing radiogenic Ar-40 contamination. Sr-87/Sr-86 isotope ratios of micas range from 0.70879 to 0.70902 with one outlier at 0.71794. The low values reflect Sr exchange with calcite occurring during crystallization/recrystallization of micas under closed-system conditions.

Metamorphism on Chromite Ores from the Dobromirtsi ultramafic massif, Rhodope Mountains (SE Bulgaria)

Podiform chromitite bodies occur in highly serpentinized peridotites at Dobromirtsi Ultramafic Massif (Rhodope Mountains, southeastern Bulgaria). The ultramafic body is believed to represent a fragment of Palaeozoic ophiolite mantle. The ophiolite sequence is associated with greenschist - lower-temperature amphibolite facies metamorphosed rocks (biotitic gneisses hosting amphibolite). This association suggests that peridotites, chromitites and metamorphic rocks underwent a common metamorphic evolution. Chromitites at Dobromirtsi have been strongly altered. Their degree of alteration depends on the chromite/silicate ratio and to a lesser extent, on the size of chromitite bodies. Alteration is recorded in individual chromite grains in the form of optical and chemical zoning. Core to rim chemical trends are expressed by MgO- and Al2O3- impoverishment, mainly compensated by FeO and/or Fe2O3 increases. Such chemical variations correspond with three main alteration events. The first one was associated with ocean-floor metamorphism and was characterized by a lizardite replacement of olivine and the absence of chromite alteration. The second event took place during greenchist facies metamorphism. During this event, MgO- and SiO2-rich fluids (derived from low temperature serpentinization of olivine and pyroxenes) reacted with chromite to form chlorite; as a consequence, chromite became altered to a FeO- and Cr2O3-rich, Al2O3-poor chromite. The third event, mainly developed during lower temperature amphibolite facies metamorphism, caused the replacement of the primary and previously altered chromite by Fe2O3-rich chromite (ferritchromite).

The Mont-Mort metapelites: Variscan metamorphism and geodynamic context (Brianconnais basement, Western Alps, Switzerland)

The Mont-Mort metapelites are one of the best preserved relies of the Variscan unit in the Brianconnais basement. These micaschists crystallized during a poly-phase metamorphic cycle, under amphibolite facies conditions. Mineral parageneses and geothermobarometric calculations indicate a two-stage evolution. Stage (1) (550-600 degrees C and 5-8 kbar) is documented by assemblages of zoned garnet, staurolite, kyanite(?), biotite, muscovite, quartz and pla gioclase. Stage (2) (550-600 degrees C and 2 kbar) is illustrated by assemblages of andalusite, sillimanite, muscovite, biotite. This metamorphic evolution is characterized by a nearly isothermal decompression path, terminating with the formation of andalusite-bearing veins. U-Pb monazite dates at 330 Ma and Ar-40/Ar-39 muscovite dates at 290-310 Ma (without substantial evidence of argon resetting) point to Variscan metamorphism and yield an estimate of the time interval between the thermal peak and the retrogression stage within this part of the Brianconnais basement. Restoring the Brianconnais and other Alpine basement units within an existing geodynamic model of Cordillera construction and destruction, it is possible to understand better the transition from a medium pressure/high temperature regime (collision with a peak metamorphism around 330 Ma) to low-P/high-T conditions (decompression in an extensional regime) with high geothermal gradient, as recorded by the successive Variscan parageneses within the Mont-Mort metapelites.

Two-stage prograde and retrograde Variscan metamorphism of glaucophane-eclogites, blueschists and greenschists from Ile de Groix (Brittany, France)

On Ile de Groix, Variscan metamorphic former tholeiitic and alkaline basalts occur as glaucophane-eclogites, blueschists and greenschists in isolated lenses and layers within metapelites. Whole-rock delta O-18(SMOW) values of the metabasites show limited variations (10.4-12.0 parts per thousand) and no systematic differences among rock types and metamorphic grades. This provides no argument for large-scale blueschist-to-greenschist transformation driven by infiltration of externally derived fluids. Metamorphic mineralogical changes should have been triggered by internal fluids. Element variations in interlayered blue- and greenschists can be attributed to magmatic fractionation. Assemblages with garnet, clinopyroxene and glaucophane of a high-pressure/low-temperature (HP-LT) metamorphism M1, and NaCa-amphiboles (barroisite, magnesiohornblende, actinolite) of a medium-pressure/medium-temperature metamorphism M2 crystallized during deformation Dl. Detailed core-rim zonation profiles display increasing and then decreasing Al-IV in glaucophane of M1. NaCa-amphiboles of M2, mantling glaucophane and crystallized in porphyroblasts, show first increasing, then decreasing, Al-IV and Al-IV. Empirically calibrated thermobarometers allowed P-T path reconstructions. In glaucophane-eclogites of a metamorphic zone I, a prograde evolution to M1 peak conditions at 400-500 degreesC/10-12 kbar was followed by a retrograde P-T path within the glaucophane stability field. The subsequent M2 evolution was again prograde up to > 600 degreesC at 8 kbar and then retrograde. Similarly, in metamorphic zones II and III, prograde and retrograde paths of MI and M2 at lower maximal temperatures and pressures exist. The almost complete metamorphic cycle during M2 signalizes that the HP-LT rocks escaped from an early erosion by a moderate second burial event and explains the longlasting slow uplift with low average cooling rates.

Reggies/flotillins regulate E-cadherin-mediated cell contact formation by affecting EGFR trafficking.

The reggie/flotillin proteins are implicated in membrane trafficking and, together with the cellular prion protein (PrP), in the recruitment of E-cadherin to cell contact sites. Here, we demonstrate that reggies, as well as PrP down-regulation, in epithelial A431 cells cause overlapping processes and abnormal formation of adherens junctions (AJs). This defect in cell adhesion results from reggie effects on Src tyrosine kinases and epidermal growth factor receptor (EGFR): loss of reggies reduces Src activation and EGFR phosphorylation at residues targeted by Src and c-cbl and leads to increased surface exposure of EGFR by blocking its internalization. The prolonged EGFR signaling at the plasma membrane enhances cell motility and macropinocytosis, by which junction-associated E-cadherin is internalized and recycled back to AJs. Accordingly, blockage of EGFR signaling or macropinocytosis in reggie-deficient cells restores normal AJ formation. Thus, by promoting EGFR internalization, reggies restrict the EGFR signaling involved in E-cadherin macropinocytosis and recycling and regulate AJ formation and dynamics and thereby cell adhesion.