Representações e conceito dos pais sobre a qualidade da creche

Tendo em conta o aumento do número de estruturas de apoio à primeira infância, particularmente, a expansão da creche, a investigação tem-se debruçado sobre as questões da qualidade. A generalidade dos estudos centra-se na discriminação das dimensões de qualidade e o seu impacto no desenvolvimento das crianças. Contudo, raramente a representação dos pais tem sido alvo de estudo. Partindo do pressuposto que a discussão sobre a qualidade da creche deve ser baseado na evidência empírica mas é, também, um conceito social baseado nos valores e representações dos seus atores, fomos ouvir os pais. Assim, quisemos conhecer: Como escolhiam a creche do seu filho(a)? Qual o seu conceito de qualidade? Que valor atribuem às experiências vividas pelo seus filhos ou filhas na creche? Que representação têm do papel do profissional de educação? Para o efeito, planificámos uma investigação em duas fases correspondendo a dois estudos empíricos. O primeiro estudo tinha como objetivo aferir livremente as Representações dos Pais acerca da Creche numa abordagem qualitativa, com recurso a entrevistas. Das entrevistas procurámos conhecer a opinião de um pequeno grupo de 20 pais com objetivo de aferir indicadores para a construção de um questionário que daria lugar ao segundo estudo - quantitativo. O primeiro estudo daria-nos a noção da opinião e o segundo estudo a noção da sua representação numa amostra de 180 participantes. Tanto quanto conhecemos (pesquisando as bases nacionais) estudos desta natureza sobre as representação dos pais sobre a creche, ainda, não tinham sido realizados em Portugal. De modo geral, os dois estudos revelaram que os pais valorizam a creche como espaço de promoção do desenvolvimento da criança; valorizam a dimensão afetiva do trabalho em creche; as educadoras como profissionais qualificados de educação e o desejo de uma relação estreita, aberta e respeitosa entre a creche e a família. Estes resultados abrem caminho para uma reflexão mais aprofundada acerca das representações, convicções e valores da família em relação à creche. - ABSTRACT Associated with an increased number of support structures for early childhood, we have witnessed a growing interest in studying the quality of these listed structures due to the impact that this will have on the quality development of children. Parents, as primary educators and educational agents privileged child, assume a key role in this regard. Through this study is to evaluate which representations and concept of parents about the quality of daycare. We performed a literature search in order to fit theoretically the main concepts covered in this study. We analyzed investigations already carried out on Nursery and Regulations and Guidelines for National Nursery. In terms of empirical studies we conducted two studies on the Representations about the Parent Nursery: A Qualitative Analysis using interviews with 20 parents and a Quantitative Study applying questionnaires to 180 parents. The main results of both studies revealed that parents value the nursery as a space to promote child development; value the affective dimension of work in nursery; qualified educators and desire for a good and respectful relationship between nursery and the family. These results pave the way for a deeper reflection about the representations, beliefs and values from the family about nursery.

Reliability analysis of a timber truss system subjected to decay

Assessing the safety of existing timber structures is of paramount importance for taking reliable decisions on repair actions and their extent. The results obtained through semi-probabilistic methods are unrealistic, as the partial safety factors present in codes are calibrated considering the uncertainty present in new structures. In order to overcome these limitations, and also to include the effects of decay in the safety analysis, probabilistic methods, based on Monte-Carlo simulation are applied here to assess the safety of existing timber structures. In particular, the impact of decay on structural safety is analyzed and discussed, using a simple structural model, similar to that used for current semi-probabilistic analysis.

The impact of restricting beverage container use in Iowa, 1/1/77.

Suzan M. Stewart, Research Librarian, Iowa Geological Survey. and Edward J. Stanek II, Director, Air Management Division, Iowa Department of Environmental Quality

Exact gravitational shockwaves and Planckian scattering on branes

We obtain a solution describing a gravitational shock wave propagating along a Randall-Sundrum brane. The interest of such a solution is twofold: on the one hand, it is the first exact solution for a localized source on a Randall-Sundrum three-brane. On the other hand, one can use it to study forward scattering at Planckian energies, including the effects of the continuum of Kaluza-Klein modes. We map out the different regimes for the scattering obtained by varying the center-of-mass energy and the impact parameter. We also discuss exact shock waves in ADD scenarios with compact extra dimensions.

Greenhouse Gas and Nitrogen Fertilizer Scenarios for U.S. Agriculture and Global Biofuels, June 2011

This analysis uses the 2011 FAPRI-CARD (Food and Agricultural Policy Research Institute–Center for Agricultural and Rural Development) baseline to evaluate the impact of four alternative scenarios on U.S. and world agricultural markets, as well as on world fertilizer use and world agricultural greenhouse gas emissions. A key assumption in the 2011 baseline is that ethanol support policies disappear in 2012. The baseline also assumes that existing biofuel mandates remain in place and are binding. Two of the scenarios are adverse supply shocks, the first being a 10% increase in the price of nitrogen fertilizer in the United States, and the second, a reversion of cropland into forestland. The third scenario examines how lower energy prices would impact world agriculture. The fourth scenario reintroduces biofuel tax credits and duties. Given that the baseline excludes these policies, the fourth scenario is an attempt to understand the impact of these policies under the market conditions that prevail in early 2011. A key to understanding the results of this fourth scenario is that in the absence of tax credits and duties, the mandate drives biofuel use. Therefore, when the tax credits and duties are reintroduced, the impacts are relatively small. In general, the results show that the entire international commodity market system is remarkably robust with respect to policy changes in one country or in one sector. The policy implication is that domestic policy changes implemented by a large agricultural producer like the United States can have fairly significant impacts on the aggregate world commodity markets. A second point that emerges from the results is that the law of unintended consequences is at work in world agriculture. For example, a U.S. nitrogen tax that might presumably be motivated for environmental benefit results in an increase in world greenhouse gas emissions. A similar situation occurs in the afforestation scenario in which crop production shifts from high-yielding land in the United States to low-yielding land and probably native vegetation in the rest of the world, resulting in an unintended increase in global greenhouse gas emissions.

Hybridilämmityksen vaikutus sähkön- ja lämmöntuotantoon

Tämän tutkimuksen tarkoituksena on selvittää kaukolämmityksen rinnalla käytettävän toisen lämmitysmuodon, tässä tapauksessa sähkölämmityksen, vaikutusta sähkön- ja lämmöntuotantoon. Tämä tutkimus liittyy ¿Kehittyvä kaukolämpö -hankkeen pilottiosaan. Hankkeen pilottiosassa tutkitaan hybridilämmityksen kannattavuutta ja vaikutuksia sekä kuluttajan että yhdyskunnan kannalta. Tämätutkimus jatkaa jo aikaisemmin tehtyä tutkimusta 'Hybridilämmityksen kustannusvaikutukset', jossa tutkittiin kaukolämmityksen taloudellisuutta kuluttajan kannalta elinkaarianalyysin avulla. Tämän tutkimuksen tarkoituksena on määrittää hybridilämmityksen niin taloudelliset kuin ympäristölliset vaikutukset yhdyskunnan kannalta. Yhdyskunnan osalta vaikutuksia tarkasteltiin referenssikaupungin avulla. Referenssikaupungin alkuarvot perustuvat jo aiemmin tähän pilottiosaan tehtyyn tutkimukseen 'Hybridilämmityksen kustannusvaikutukset'. Näitä arvoja hyväksi käyttäen referenssikaupungille perustettiin kaksi energian tuotantorakennemallia ja molemmille malleille kaksi eri skenaariota hybridilämmityksen kasvamisesta. Skenaarioissa otettiin huomioon myös päästökaupan vaikutukset. Molemmat skenaariot osoittivat päästökaupan vaikutukset mukaan luettuna, ettei sähkölämmityksen käyttäminen kaukolämmityksen ohella tuo ainoastaan yhdyskunnalle lisää tuotantokustannuksia, vaan se lisää myös päästöjä. Tulevaisuuden epävarmuutta analysoitiin herkkyysanalyysin avulla. Tutkimusta varten laadittiin tuontienergian ja kotimaisten polttoaineiden hinnoille kaksi skenaariota, joilla laskettiin vuositason tuotantokustannukset. Jokainen skenaario toi huomattavan lisän niin tuotantokustannuksiin kuin päästöihin. Eri skenaarioilla oli vaikutus kaukolämmön pysyvyyskäyrän muotoon ja näin myös voimalaitoksien käyttötunteihin. Laitoksien huipun käyttötunnit pienenevät ja tuotantokustannukset tuotettua energiayksikköä kohden kasvavat. Tapauksessa, jossa on edullista käyttää peruskuormalaitoksia mahdollisimman paljonvuoden aikana, hybridilämmityksen käyttäminen siirsi tilannetta päinvastaiseen suuntaan. Tämä suunta tarkoittaa sitä, että halpaa peruskuormatuotantoapitää korvata kalliimmalla ja enemmän päästöjä aiheuttavalla erillistuotannolla. Tämän tutkimuksen tulokset osoittavat, että mikäli sähkölämmityksen yleistyminen kaukolämmityksen rinnalla lisääntyy, aiheuttaa se yhdyskunnalle huomattavia lisäkustannuksia ja päästöjä. Yksi sähkölämmityksen käyttöä lisäävä tekijä on kuluttajien mielikuva. Kuluttajien mielikuva sähkölämmityksestä on, että se on asennuskustannuksiltaan edullinen ja helppo asentaa. Todellisuudessa sähkölämmityksen käyttäminen tuo odottamattomia lisäkustannuksia kuluttajille energiantuotantolaitoksien omien lisääntyvien tuotantokustannusten kautta. Nämä kustannukset voivat realisoitua esimerkiksi kohonneiden sähkön ja kaukolämmön energiamaksujen tai sähkön siirtomaksujen muodossa. Ainoastaan kuluttajien mielikuvien muuttamisella voidaan päästä yhdyskunnan kannalta taloudellisempaan ja ympäristöystävällisempään energiantuotantomalliin.

Teollisuuden energiaverorasitus EU-maissa ja eräissä muissa maissa

Useat maat ovat 1990-luvulla ottaneet käyttöön energiaveroja. Energiaverot vaikuttavat etenkin energiavaltaisen teollisuuden toimintaan. Energiaverojen aiheuttamien kustannusten siirto hintoihin on hankalaa tuotteiden kilpaillessa maailmanmarkkinoilla. Suomen perusteollisuus on hyvin energiaintensiivistä ja sen monet tuotteet on suunnattu vientiin. Suomen lisäksi kaikkia teollisuuden käyttämiä polttoaineita verotetaan vain Alanko-maissa, Italiassa ja Tanskassa. Teollisuudelle on usein lisäksi alhaisempi verotaso kuin kotitalouksille. Energiaverotasojen tarkastelu sellaisenaan ei kerro veron todellista vaikutusta. Diplo-mityössä tarkastellaan teollisuuden maksamien energiaverojen taloudellista rasittavuutta vertaamalla maksettuja energiaveroja tuotannon jalostusarvoon. Energiaveroja ympä-ristönäkökohdista tarkastellaan vertaamalla maksettuja energiaveroja hiilidioksidipäästöihin. Diplomityössä käsitellään kolmea teollisuuden energiavaltaisinta toimialaa: metsäteollisuutta, metallien jalostusta sekä kemianteollisuutta. Vertailumaina ovat Euroopan Unionin 15 jäsenmaan lisäksi Norja, Sveitsi, Japani, Kanada ja Yhdysvallat. Sähkön kulutus- ja/tai tuotantovero on monissa maissa ja useimmilla toimialoilla merkittävin yksittäinen energiavero. Sähkön käyttö teollisuudessa on runsasta, joten sillä on muita veroja selvemmin havaittava vaikutus verorasitusten kasvuun.

Production of Mg(OH)2 from Mg-silicate rock for CO2 mineral sequestration

Sequestration of carbon dioxide in mineral rocks, also known as CO2 Capture and Mineralization (CCM), is considered to have a huge potential in stabilizing anthropogenic CO2 emissions. One of the CCM routes is the ex situ indirect gas/sold carbonation of reactive materials, such as Mg(OH)2, produced from abundantly available Mg-silicate rocks. The gas/solid carbonation method is intensively researched at Åbo Akademi University (ÅAU ), Finland because it is energetically attractive and utilizes the exothermic chemistry of Mg(OH)2 carbonation. In this thesis, a method for producing Mg(OH)2 from Mg-silicate rocks for CCM was investigated, and the process efficiency, energy and environmental impact assessed. The Mg(OH)2 process studied here was first proposed in 2008 in a Master’s Thesis by the author. At that time the process was applied to only one Mg-silicate rock (Finnish serpentinite from the Hitura nickel mine site of Finn Nickel) and the optimum process conversions, energy and environmental performance were not known. Producing Mg(OH)2 from Mg-silicate rocks involves a two-staged process of Mg extraction and Mg(OH)2 precipitation. The first stage extracts Mg and other cations by reacting pulverized serpentinite or olivine rocks with ammonium sulfate (AS) salt at 400 - 550 oC (preferably < 450 oC). In the second stage, ammonia solution reacts with the cations (extracted from the first stage after they are leached in water) to form mainly FeOOH, high purity Mg(OH)2 and aqueous (dissolved) AS. The Mg(OH)2 process described here is closed loop in nature; gaseous ammonia and water vapour are produced from the extraction stage, recovered and used as reagent for the precipitation stage. The AS reagent is thereafter recovered after the precipitation stage. The Mg extraction stage, being the conversion-determining and the most energy-intensive step of the entire CCM process chain, received a prominent attention in this study. The extraction behavior and reactivity of different rocks types (serpentinite and olivine rocks) from different locations worldwide (Australia, Finland, Lithuania, Norway and Portugal) was tested. Also, parametric evaluation was carried out to determine the optimal reaction temperature, time and chemical reagent (AS). Effects of reactor types and configuration, mixing and scale-up possibilities were also studied. The Mg(OH)2 produced can be used to convert CO2 to thermodynamically stable and environmentally benign magnesium carbonate. Therefore, the process energy and life cycle environmental performance of the ÅAU CCM technique that first produces Mg(OH)2 and the carbonates in a pressurized fluidized bed (FB) were assessed. The life cycle energy and environmental assessment approach applied in this thesis is motivated by the fact that the CCM technology should in itself offer a solution to what is both an energy and environmental problem. Results obtained in this study show that different Mg-silicate rocks react differently; olivine rocks being far less reactive than serpentinite rocks. In summary, the reactivity of Mg-silicate rocks is a function of both the chemical and physical properties of rocks. Reaction temperature and time remain important parameters to consider in process design and operation. Heat transfer properties of the reactor determine the temperature at which maximum Mg extraction is obtained. Also, an increase in reaction temperature leads to an increase in the extent of extraction, reaching a maximum yield at different temperatures depending on the reaction time. Process energy requirement for producing Mg(OH)2 from a hypothetical case of an iron-free serpentine rock is 3.62 GJ/t-CO2. This value can increase by 16 - 68% depending on the type of iron compound (FeO, Fe2O3 or Fe3O4) in the mineral. This suggests that the benefit from the potential use of FeOOH as an iron ore feedstock in iron and steelmaking should be determined by considering the energy, cost and emissions associated with the FeOOH by-product. AS recovery through crystallization is the second most energy intensive unit operation after the extraction reaction. However, the choice of mechanical vapor recompression (MVR) over the “simple evaporation” crystallization method has a potential energy savings of 15.2 GJ/t-CO2 (84 % savings). Integrating the Mg(OH)2 production method and the gas/solid carbonation process could provide up to an 25% energy offset to the CCM process energy requirements. Life cycle inventory assessment (LCIA) results show that for every ton of CO2 mineralized, the ÅAU CCM process avoids 430 - 480 kg CO2. The Mg(OH)2 process studied in this thesis has many promising features. Even at the current high energy and environmental burden, producing Mg(OH)2 from Mg-silicates can play a significant role in advancing CCM processes. However, dedicated future research and development (R&D) have potential to significantly improve the Mg(OH)2 process performance.

Enlarging a training set for genomic selction by imputation of un-genotyped animals in populations of varying genetic architecture

Background: The most common application of imputation is to infer genotypes of a high-density panel of markers on animals that are genotyped for a low-density panel. However, the increase in accuracy of genomic predictions resulting from an increase in the number of markers tends to reach a plateau beyond a certain density. Another application of imputation is to increase the size of the training set with un-genotyped animals. This strategy can be particularly successful when a set of closely related individuals are genotyped. ----- Methods: Imputation on completely un-genotyped dams was performed using known genotypes from the sire of each dam, one offspring and the offspring’s sire. Two methods were applied based on either allele or haplotype frequencies to infer genotypes at ambiguous loci. Results of these methods and of two available software packages were compared. Quality of imputation under different population structures was assessed. The impact of using imputed dams to enlarge training sets on the accuracy of genomic predictions was evaluated for different populations, heritabilities and sizes of training sets. ----- Results: Imputation accuracy ranged from 0.52 to 0.93 depending on the population structure and the method used. The method that used allele frequencies performed better than the method based on haplotype frequencies. Accuracy of imputation was higher for populations with higher levels of linkage disequilibrium and with larger proportions of markers with more extreme allele frequencies. Inclusion of imputed dams in the training set increased the accuracy of genomic predictions. Gains in accuracy ranged from close to zero to 37.14%, depending on the simulated scenario. Generally, the larger the accuracy already obtained with the genotyped training set, the lower the increase in accuracy achieved by adding imputed dams. ----- Conclusions: Whenever a reference population resembling the family configuration considered here is available, imputation can be used to achieve an extra increase in accuracy of genomic predictions by enlarging the training set with completely un-genotyped dams. This strategy was shown to be particularly useful for populations with lower levels of linkage disequilibrium, for genomic selection on traits with low heritability, and for species or breeds for which the size of the reference population is limited.

Simulation of urban microclimates

Urban microclimates are greatly affected by urban form and texture and have a significant impact on building energy performance. The impact of urban form on energy consumption in buildings mainly relates to the availability of the uses of solar radiation, daylighting and natural ventilation. The urban heat island (UHI) effect increases the risk of overheating in buildings as well as the maximum energy demand for cooling. A need has arisen for a robust calculation tool (using the first-cut calculation method) to enable planners, architects and environmental assessors, to quickly and accurately compare the impact of different urban forms on local climate and UHI mitigation strategies. This paper describes a tool for the simulation of urban microclimates, which is developed by integrating image processing with a coupled thermal and airflow model.

Sensitivity of direct radiative forcing by mineral dust to particle characteristics

Airborne dust affects the Earth's energy balance — an impact that is measured in terms of the implied change in net radiation (or radiative forcing, in W m-2) at the top of the atmosphere. There remains considerable uncertainty in the magnitude and sign of direct forcing by airborne dust under current climate. Much of this uncertainty stems from simplified assumptions about mineral dust-particle size, composition and shape, which are applied in remote sensing retrievals of dust characteristics and dust-cycle models. Improved estimates of direct radiative forcing by dust will require improved characterization of the spatial variability in particle characteristics to provide reliable information dust optical properties. This includes constraints on: (1) particle-size distribution, including discrimination of particle subpopulations and quantification of the amount of dust in the sub-10 µm to <0.1 µm mass fraction; (2) particle composition, specifically the abundance of iron oxides, and whether particles consist of single or multi-mineral grains; (3) particle shape, including degree of sphericity and surface roughness, as a function of size and mineralogy; and (4) the degree to which dust particles are aggregated together. The use of techniques that measure the size, composition and shape of individual particles will provide a better basis for optical modelling.

Topological charge screening and pseudoscalar glueballs

Topological charge screening in the QCD vacuum is found to provide crucial nonperturbative contributions to the short-distance expansion of the pseudoscalar (0-+) glueball correlator. The screening contributions enter the Wilson coefficients and are an indispensable complement to the direct instanton contributions. They restore consistency with the anomalous axial Ward identity and remedy several flaws in the 0-+ glueball sum rules caused by direct instantons in the absence of screening (lack of resonance signals, violation of the positivity bound and of the underlying low-energy theorem). The impact of the finite width of the instanton size distribution and the (gauge-invariant) renormalization of the instanton contributions are also discussed. New predictions for the 0-+ glueball mass and decay constant are presented.

Physical-chemical and thermodynamic analyses of steam reforming of ethanol to hydrogen production

The steam reforming is one of most utilized process of hydrogen production because of its high production efficiencies and its technological maturity. The use of ethanol for this purpose is a interesting option because this is a renewable and less environmentally offensive fuel. The objective of this study is evaluate the physical-chemical, thermodynamic and environmental analyses of steam reforming of ethanol. whose objective is to produce 0.7 Nm3/h of hydrogen to be used by a PEMFC of l kW. In this physical-chemical analysis, a global reaction of ethanol was considered. That is, the superheated ethanol and steam, at high temperatures, react to produce hydrogen and carbon dioxide. Beyond it's the simplest form to study the steam reforming of ethanol to hydrogen production, it's the case where occurs the highest production of hydrogen (the product to be used by fuel cells) and carbon dioxide, to be eliminated. But this reaction isn't real and depends greatly on the thermodynamic conditions of reforming, technical features of reformer system and catalysts. Other products generally formed (but not investigated in this study) are methane, carbon monoxide, among others. It was observed that the products is commonly produced in the moment when the reaction attains temperatures about 206°C (below this temperature, the reaction trend to the reaetants, that is, from hydrogen and carbon dioxide to steam and ethanol) and the advance degree of this reaction increases when the temperature of reaction also increases and when its pressure decreases. It's suggested reactions at about 600°C or higher. However, when the temperature attains 700°C, the stability of this reaction is occurred, that is, the production of reaction productions attains to the limit, that is the highest possible production. In temperatures above 700°C, the use of energy is very high for produce more products, having higher costs of production that the suggested temperature. The indicated pressure is 1 atm., a value that allows a desirable economy of energy that would also be used for pressurization or depressurization of steam reformer. In exergetic analysis, it's seem that the lower irreversibililies occur when the pressure of reactions are lower. However, the temperature changes don't affect significantly the irreversibilites. Utilizing the obtained results from this analysis, it was concluded that the best thermodynamic conditions for steam reforming of ethanol is the same conditions suggested in the physical-chemical analysis. The exergetic and first law efficiencies are high on the thermodynamie conditions studied.

Proposta de metodologia para análise de eficiência hidro-energética e ambiental: estudo de caso da agroindústria

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Structure and thermodynamics of H3O+(H2O)8 clusters: A combined molecular dynamics and quantum mechanics approach

We have studied the structure and stability of (H3O+)(H2O)8 clusters using a combination of molecular dynamics sampling and high-level ab initio calculations. 20 distinct oxygen frameworks are found within 2 kcal/mol of the electronic or standard Gibbs free energy minimum. The impact of quantum zero-point vibrational corrections on the relative stability of these isomers is quite significant. The box-like isomers are favored in terms of electronic energy, but with the inclusion of zero-point vibrational corrections and entropic effects tree-like isomers are favored at higher temperatures. Under conditions from 0 to 298.15 K, the global minimum is predicted to be a tree-like structure with one dangling singly coordinated water molecule. Above 298.15 K, higher entropy tree-like isomers with two or more singly coordinated water molecules are favored. These assignments are generally consistent with experimental IR spectra of (H3O+)(H2O)8 obtained at 150 K.