Aplicação do earned value em projetos complexos - um estudo de caso na EMBRAER

O gerenciamento do Earned Value vem obtendo aceitação crescente nas empresas e entre profissionais tais como gerentes de projetos e funcionais, devido à sua efetividade no controle dos resultados do projeto. Earned Value é definido como uma ferramenta de controle que permite avaliar simultaneamente de maneira quantitativa como se encontram os custos e prazos em uma data de controle, permitindo também prever a data de término e o valor gasto (VARGAS, 2005). Este artigo avalia a aplicabilidade do earned value como ferramenta de controle de projetos aeronáuticos na EMBRAER. Contribui também para a aplicação do earned value no controle de projetos complexos. Utilizam-se como técnicas de coleta de dados: entrevistas, observações e análise documental. Conclui-se que o earned value é utilizado apenas nos projetos da área de aviação de defesa, por ser uma exigência contratual. O uso do earned value nas áreas de programas executivos e comerciais restringe-se às fases de definição conjunta, projeto detalhado e certificação, pois o escopo do projeto é bem definido, o cronograma é detalhado e os custos são previstos e obtidos com maior acuidade. Nas demais fases de desenvolvimento do produto, o uso do earned value é restrito, devido principalmente às constantes alterações de escopo do produto e do projeto.

Prospecção geofísica em ocorrência de cobre localizada na bacia sedimentar do Camaquã (RS)

Estudos de pesquisa mineral são fundamentais para o reconhecimento e a incorporação de novas reservas. Esse trabalho apresenta os resultados de aplicação do método geofísico da eletrorresistividade numa ocorrência mineralizada em carbonatos de cobre, por meio da técnica de caminhamento elétrico em arranjo azimutal. A área de estudos está inserida na bacia sedimentar do Camaquã, formada por um conjunto de unidades estratigráficas sedimentares e vulcanogênicas, onde são descritas diversas ocorrências cupríferas. A presença de azurita e malaquita em fraturas e zonas de maior porosidade em arenito encaixante define a geologia local. Os modelos de inversão revelam anomalias circulares de resistividade moderada para até 25m abaixo da ocorrência aflorante e anomalias de baixa resistividade em profundidades abaixo de 25m, além de áreas adjacentes com alta resistividade. Indicadores de mineralização descritos para ocorrências de cobre estudadas, no âmbito da bacia sedimentar do Camaquã, ocorrem na área de estudos e permitem caracterização em termos de resistividade elétrica. Áreas com silicificação apresentam alta resistividade, enquanto que valores intermediários são atribuídos a zonas com carbonatação e, finalmente, áreas de baixa resistividade, provavelmente, indicam concentrações de sulfetos disseminados.

Seleção de métodos para avaliação do cobre disponível nos solos

Fez-se um estudo de seleção de métodos para cobre disponível, empregando-se trinta solos coletados na região de Jaboticabal, SP. Os solos utilizados pertencem aos seguintes grandes grupos: Solos Podzolizados de Lins e Marília, variação Lins e variação Marília, Latossolo Vermelho-Escuro fase arenosa, Latossolo Roxo, e Terra Roxa Estruturada. O cobre dos solos foi extraído através das seguintes soluções extratoras: CaCl2 0,5 M; Mg02 2,0 N; CH3COONH4 1,0 N1 pH 6,0 e pH 4,8; HCl 0,05 N e O,1 N; H2SO4 0,05 N; DTPA 0,005 M pH 7,3 e pH 6,0; EDTA 0,01 M + (NH4)2CO3 1,0 MpH 8,6; EDTA 0,02 M + CH3C0011 0,5 M + CH3COONH4 0,5 M pH 4,65 (AAAc-EDTA); e Na2EDTA 1,0%. Foi realizado ensaio em casa de vegetação, e o milho (Zea mays L.) foi empregado como planta teste. Excluindo-se o extrator CaCl2 0,5 M, todos os demais apresentaram coeficientes de correlação entre cobre extraído do solo e o absorvido pelo milho, significativos e próximos uns dos outros. Assim, com base também em parâmetros como o coeficiente de variação, o coeficiente angular e a praticidade do método, pode-se indicar um dos seguintes extratores para a avaliação do cobre disponível dos solos: DTPA 0,005 M pH 7,3, HCl 0,1 N e Na2EDTA 1,0%.

Teores de cobre, ferro, manganês e zinco no fígado e pâncreas de caprinos semi-confinados e confinados

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Complexos fosfínicos e suas aplicações na medicina

Phosphines are well known to chemists. The ligands themselves are widely used in organic synthesis (e.g. The Wittig reaction) and transition metal phosphine complexes have been studied extensively primarily for their applications as hydrogenation catalysts (e.g. Wilkinson's catalyst). In this article attention is focused on the biological properties of phosphines and metal phosphine complexes since the triethylphosphine Au(I) complex, auranofin, has been used as antiarthritic drug for clinical use. This fact has provided a stimulus for exploration of the biological chemistry of phosphines and their metal complexes. Metal phosphine complexes also offer potential as heart-imaging agents and anticancer drugs.

O comportamento fotoquímico dos complexos pentaaminas de rutênio(II) com ligantes pi insaturados

A general overview on the photochemical behaviour of [Ru(NH3)(5)L](2+) complexes (where L is a pi ligand) is presented. The proposed mechanisms and techniques employed for the study of these reactions are discussed. Emphasis is made on the mechanisms that allow the identification of the reactive excited state of the [Ru(NH3)(5)py](2+) complex.

Biossorção de cobre, manganês e cádmio por biomassas de Saprolegnia subterranea(Dissmann) R.L. Seym. e Pythium torulosumCoker & P. Patt. (Oomycetes)

Dried biomass of the zoosporic fungi Saprolegnia subterranea and Pythium torulosum was evaluated for copper, manganese and cadmium biosorption from aqueous solutions using the "q" (mg of adsorbed metal per g of biomass) and the "R%" (percent removal) indices. The highest q values were observed when the biomass was placed in contact with high metal concentrations, whereas the highest R% values were observed at low concentrations (p< 0.05). S. subterranea SPC 1244 biomass surpassed the others for copper biosorption (q = 7.48 mg/ g; R% = 49.03), P. torulosum SPC 1425 biomass was the best for manganese biosorption (q = 4.13 mg/g; R% = 26.71), and S. subterranea SPC 1431 biomass was the best for cadmium biosorption (q = 6.75 mg/g; R% = 42.26). This is the first report on copper, manganese and cadmium biosorption by the biomass of these zoosporic fungi, indicating the potential to remove ions from diluted solutions.

Estudo das alterações lineares na região cervical de blocos M.O.D. fundidos em liga de cobre alumínio, segundo as técnicas de expansão higroscópica e térmica.

The authors studied linear alterations processed on copper-aluminum casten MOD blocks, obtained from two expansion techniques (termic and hygroscopic by immersion). UNITERMS: Investment expansion. Thermic expansion. Hygroscopic expansion. Casten Technique.

Rugosidade superficial de ligas com alto conteúdo de cobre, em função do aquecimento acima da temperatura de fusão.

Being the surface roughness a fundamental property in the fit of the castings, it was determined the roughness of 5 high-copper casting alloys, according to the heating over their melting temperature. That way, the specimens made with smooth plastic in the shape of a rectangular plate, 2 mm x 7 mm x 11 mm were invested into a cristobalite investment. After heating and elimination on the plastic, the molds were filled by 3 g of molten alloy, casted in a electrical casting machine at the casting temperature at 25 degrees C and 50 degrees C overheating. The surface roughness was measured in a roughness analyser, Talysurf. As a result, it was verified that there is a variation of surface roughness among the alloys tested, and the heating of the alloys until 50 degrees C over the melting temperature does not interfere in the roughness.

Efeito das técnicas de fusão sobre a fluidez de ligas do sistema cobre-alumínio.

It was evaluated the castability of four copper-aluminium alloy according the melting casting method used. The specimens were made using polyester mesh screen, with 11 x 11 filaments of 0.26 mm thick, fixed along of two adjacent edges in wax bar, with the sprue attached at their junction. The alloys were in an electrical casting machine and a centrifugal casting machine with an air/gas torch. The castability values were obtained by the percentage of completed segments of the resulting cast alloy screen. It was verified that the use of the electrical casting machine produced higher castability values to the copper-aluminium alloys than those produced by a centrifugal casting machine with an air/gas torch.

Determinação de dureza de ligas de cobre, na forma como são recebidas e após a fundição, em função das técnicas de fusão.

It was evaluated the Vickers hardness of five high-copper casting alloys, in their original package form and after casting, according to the casting method used. That way, ten ingots, supplied by the manufacturers of each alloy, were included in self-curing acrylic resin, polished, numerated and submitted to Vickers hardness test at load of 200 g during 30 seconds. Afterwards the numerated ingots were removed from the acrylic resin and five of those were cast in an electrical casting machine and the other five in a centrifugal casting machine with an air/gas torch. The specimens obtained were included in self-curing acrylic resin, polished and submitted to Vickers hardness test. As a result it was verified that there is a variation of hardness among the alloys tested, and the use of the electrical casting machine produced lower hardness values than those produced when used the centrifugal casting machine with an air/gas torch. Also, there is a decrease of hardness of the cast alloys when they are tested in their original form and after casting.

Os complexos granitoides Cunhaporanga e Tres Corregos (PR) zoneamento magmatico e implicacoes geotectonicas

Geological, petrographic, chemical and zircon typology data from the Cunhaporanga and Tres Corregos granitoid complexes are presented and discussed. Both complexes of Late Precambrian age evolved by crystal fractionation. By its zircon typology the Cunhaporanga is classified as a low temperature calc-alkaline batholith and the Tres Corregos as a medium temperature calc-alkaline complex. This classification implies a major participation of mantle material during the generation of the Tres Corregos magma in relation to the Cunhaporanga ones. In this way both complexes define a magmatic zoning from NW to SE done by a increasing in the depth of magma generation. -from English summary

Estudio de los procesos de corrosion de una aleacion metalica de cobre usada en odontologia

Corrosion phenomena in a dental copper-based alloy are experimentally studied using electrochemical techniques. Two heating sources, torch and induction, were used in the casting experiments. In the corrosion essays, the optimum casting cycle and the polarization curves were obtained. It was found that the heating sources have little influence on the corrosion processes of the metallic alloys studied.

Alterações hematológicas e histopatológicas em pacu, Piaractus mesopotamicus Holmberg, 1887 (Osteichthyes, Characidae), tratado com sulfato de cobre (CuSo4)

This paper evaluated the haematological and glycaemic parameters in Piaractus mesopotamicus (Osteichthyes, Characidae) infected with Monogenea Anacanthorus penilabiatus Boeger, Husak & Martins, 1995 (Dactylogyridae) after treatment with 0.50 mg/L and 1.00 mg/L of copper sulphate (CuSO4). The efficacy of the CuSO4 was observed in the first day after administration but not after eight, fifteen or thirty days. The histopathological analyses showed hyperplasia of the epithelium and circulatory changes in the gills. In the first day after treatment significant changes (P<0.05) in the total count of erythrocyte, leucocyte, mean corpuscular haemoglobin concentration (MCHC) were observed. The fishes treated with 0.50 mg/L showed decrease in the haemoglobin levels and in the percentage of neutrophils (P<0.05). The dose of 1.00 mg/L provoked increase of glycaemia but reduction in the lymphocytes percentage when compared with 0.50 mg/L in the 8th day. Fifteen days after 1.00 mg/L treatment, values of mean corpuscular volume (MCV) and special granulocitic cells (S.G.C.) percentage decreased. Nevertheless, increase of total leucocyte number was observed. Thirty days after treatment with 0.50 mg/L showed increased S.G.C. and treatment with 1.00 mg/L showed increased lymphocyte.

Desenvolvimento de um dispositivo para obtenção de monocristais de ligas à base de cobre

This paper describes the drawing, construction and optimization of a device, which can be used to obtain single crystals of different metallic materials with melting point from 550 to 1050°C. Components of ease obtaining and of low cost were used. The device was based on the modified Bridgman technique and it was used to obtain single crystals of copper-based alloys. The temperature axial profiles and a difference less then 1% in the temperature between the wall and the center of the ceramic tube in the critical region for obtaining single crystals of good quality indicated that the oven presents a good thermal stability. Single crystals of CuZnAl and CuAlAg alloys of good quality were growth and characterized using optical microscopy and Laüe X-ray back reflection.