The application of computerised modelling techniques in manufacturing system design

The absence of a definitive approach to the design of manufacturing systems signifies the importance of a control mechanism to ensure the timely application of relevant design techniques. To provide effective control, design development needs to be continually assessed in relation to the required system performance, which can only be achieved analytically through computer simulation. The technique providing the only method of accurately replicating the highly complex and dynamic interrelationships inherent within manufacturing facilities and realistically predicting system behaviour. Owing to the unique capabilities of computer simulation, its application should support and encourage a thorough investigation of all alternative designs. Allowing attention to focus specifically on critical design areas and enabling continuous assessment of system evolution. To achieve this system analysis needs to efficient, in terms of data requirements and both speed and accuracy of evaluation. To provide an effective control mechanism a hierarchical or multi-level modelling procedure has therefore been developed, specifying the appropriate degree of evaluation support necessary at each phase of design. An underlying assumption of the proposal being that evaluation is quick, easy and allows models to expand in line with design developments. However, current approaches to computer simulation are totally inappropriate to support the hierarchical evaluation. Implementation of computer simulation through traditional approaches is typically characterized by a requirement for very specialist expertise, a lengthy model development phase, and a correspondingly high expenditure. Resulting in very little and rather inappropriate use of the technique. Simulation, when used, is generally only applied to check or verify a final design proposal. Rarely is the full potential of computer simulation utilized to aid, support or complement the manufacturing system design procedure. To implement the proposed modelling procedure therefore the concept of a generic simulator was adopted, as such systems require no specialist expertise, instead facilitating quick and easy model creation, execution and modification, through simple data inputs. Previously generic simulators have tended to be too restricted, lacking the necessary flexibility to be generally applicable to manufacturing systems. Development of the ATOMS manufacturing simulator, however, has proven that such systems can be relevant to a wide range of applications, besides verifying the benefits of multi-level modelling.

Age-related macular degeneration and modification of systemic complement factor H production through liver transplantation

Purpose: To investigate whether modification of liver complement factor H (CFH) production, by alteration of liver CFH Y402H genotype through liver transplantation (LT), influences the development of age-related macular degeneration (AMD). Design: Multicenter, cross-sectional study. Participants: We recruited 223 Western European patients ≥55 years old who had undergone LT ≥5 years previously. Methods: We determined AMD status using a standard grading system. Recipient CFH Y402H genotype was obtained from DNA extracted from recipient blood samples. Donor CFH Y402H genotype was inferred from recipient plasma CFH Y402H protein allotype, measured using enzyme-linked immunosorbent assays. This approach was verified by genotyping donor tissue from a subgroup of patients. Systemic complement activity was ascertained by measuring levels of plasma complement proteins using an enzyme-linked immunosorbent assay, including substrates (C3, C4), activation products (C3a, C4a, and terminal complement complex), and regulators (total CFH, C1 inhibitor). Main Outcome Measures: We evaluated AMD status and recipient and donor CFH Y402H genotype. Results: In LT patients, AMD was associated with recipient CFH Y402H genotype (P = 0.036; odds ratio [OR], 1.6; 95% confidence interval [CI], 1.0-2.4) but not with donor CFH Y402H genotype (P = 0.626), after controlling for age, sex, smoking status, and body mass index. Recipient plasma CFH Y402H protein allotype predicted donor CFH Y402H genotype with 100% accuracy (n = 49). Plasma complement protein or activation product levels were similar in LT patients with and without AMD. Compared with previously reported prevalence figures (Rotterdam Study), LT patients demonstrated a high prevalence of both AMD (64.6% vs 37.1%; OR, 3.09; P<0.001) and the CFH Y402H sequence variation (41.9% vs 36.2%; OR, 1.27; P = 0.014). Conclusions: Presence of AMD is not associated with modification of hepatic CFH production. In addition, AMD is not associated with systemic complement activity in LT patients. These findings suggest that local intraocular complement activity is of greater importance in AMD pathogenesis. The high AMD prevalence observed in LT patients may be associated with the increased frequency of the CFH Y402H sequence variation. © 2013 by the American Academy of Ophthalmology Published by Elsevier Inc.

Desalination of brackish water by a batch reverse osmosis desalink system for use with solar thermal energy

For remote, semi-arid areas, brackish groundwater (BW) desalination powered by solar energy may serve as the most technically and economically viable means to alleviate the water stresses. For such systems, high recovery ratio is desired because of the technical and economical difficulties of concentrate management. It has been demonstrated that the current, conventional solar reverse osmosis (RO) desalination can be improved by 40–200 times by eliminating unnecessary energy losses. In this work, a batch-RO system that can be powered by a thermal Rankine cycle has been developed. By directly recycling high pressure concentrates and by using a linkage connection to provide increasing feed pressures, the batch-RO has been shown to achieve a 70% saving in energy consumption compared to a continuous single-stage RO system. Theoretical investigations on the mass transfer phenomena, including dispersion and concentration polarization, have been carried out to complement and to guide experimental efforts. The performance evaluation of the batch-RO system, named DesaLink, has been based on extensive experimental tests performed upon it. Operating DesaLink using compressed air as power supply under laboratory conditions, a freshwater production of approximately 300 litres per day was recorded with a concentration of around 350 ppm, whilst the feed water had a concentration range of 2500–4500 ppm; the corresponding linkage efficiency was around 40%. In the computational aspect, simulation models have been developed and validated for each of the subsystems of DesaLink, upon which an integrated model has been realised for the whole system. The models, both the subsystem ones and the integrated one, have been demonstrated to predict accurately the system performance under specific operational conditions. A simulation case study has been performed using the developed model. Simulation results indicate that the system can be expected to achieve a water production of 200 m3 per year by using a widely available evacuated tube solar collector having an area of only 2 m2. This freshwater production would satisfy the drinking water needs of 163 habitants in the Rajasthan region, the area for which the case study was performed.

Astrocyte and neuronal plasticity in the somatosensory system

Changing the whisker complement on a rodent's snout can lead to two forms of experience-dependent plasticity (EDP) in the neurons of the barrel cortex, where whiskers are somatotopically represented. One form, termed coding plasticity, concerns changes in synaptic transmission and connectivity between neurons. This is thought to underlie learning and memory processes and so adaptation to a changing environment. The second, called homeostatic plasticity, serves to maintain a restricted dynamic range of neuronal activity thus preventing its saturation or total downregulation. Current explanatory models of cortical EDP are almost exclusively neurocentric. However, in recent years, increasing evidence has emerged on the role of astrocytes in brain function, including plasticity. Indeed, astrocytes appear as necessary partners of neurons at the core of the mechanisms of coding and homeostatic plasticity recorded in neurons. In addition to neuronal plasticity, several different forms of astrocytic plasticity have recently been discovered. They extend from changes in receptor expression and dynamic changes in morphology to alteration in gliotransmitter release. It is however unclear how astrocytic plasticity contributes to the neuronal EDP. Here, we review the known and possible roles for astrocytes in the barrel cortex, including its plasticity.

A kapitalizmus néhány rendszerspecifikus vonása (Some system-specific features of capitalism)

A szerző korábban a szocialista rendszer és a posztszocialista átmenet elemzésére használta azt a szemléletet és módszertant, amelyet rendszerparadigmának nevezett el. A jelen tanulmány a kapitalizmus néhány általános vonásának vizsgálatára alkalmazza ezt a megközelítést. A cikk - fogalmi tisztázás után - példákat sorol fel a kapitalizmus néhány rendszerspecifikus vonására, majd kettővel részletesebben foglalkozik. Az egyik: a rendszer dinamizmusa. Az elmúlt évszázad nagy újításai, amelyek mélyrehatóan átalakították nemcsak a termelés technológiáját, hanem az emberek mindennapi életét is, a kapitalista rendszer és annak főszereplője, a vállalkozó vezette be és terjesztette el. Csak a kapitalizmusban tud kialakulni a vállalkozás és újítás mechanizmusa, az ehhez szükséges erőteljes ösztönzés és rugalmas tőkepiac. A másik példa: a kapitalista rendszer immanens tulajdonsága a munkaerőpiacon jelentkező tartós többlet, szemben a szocialista rendszerrel, amelynek kifejlett formájában tartós munkaerőhiány mutatkozik. Elméletileg és tapasztalatilag is igazolható, hogy minél dinamikusabb a kapitalista gazdaság állandó átalakulása, annál inkább keletkezik strukturális munkanélküliség. A hatékony bér elmélete megmagyarázza, miért érdeke a munkaadónak, hogy a piactisztító bérnél magasabb bért fizessen, és ezzel munkanélküliséget idézzen elő. A kapitalizmus reformálható rendszer. Ám ügyelni kell arra, hogy a részreformok között milyen a kapcsolat. Szerencsés esetben kiegészítik egymást. Ám ennél sokkal gyakoribb, hogy miközben szembeszállunk a rendszer egyik kedvezőtlen hajlamával, utat engedünk egy másik kedvezőtlen hajlam megerősödésének. ___________________ The author previously applied the outlook and methodology he named the system paradigm to analysing the socialist system and post-socialist transition. This study takes the same approach to some general attributes of capitalism. After clarifying some concepts, the author presents examples of some system-specific features of capitalism, before ad-dressing two of them in detail. One is the dynamism of the system. The great innovations of the last century that radically altered both the technology of production and people s daily lives were all introduced and disseminated by the capitalist system and its protago-nist, the entrepreneur. Only under capitalism can the mechanism of entrepreneurship and innovation emerge, with the strong incentives and flexible capital market they require. The other immanent feature is a chronic surplus on the labour market that contrasts sharply with the chronic labour shortage prevalent under the mature socialist system. Theory and experience confirm that the faster the ongoing transformation of a capitalist economy proceeds, the greater the propensity for structural unemployment to appear. It is explained by the efficiency pay hypothesis how an employer has an incentive to pay more than a market-clearing wage, thereby introducing unemployment. Capitalism is a system that can be reformed, but attention needs paying to relations between reforms of different parts of the system. In fortunate cases they complement each other, but it is commoner to find that tackling one unfavourable tendency only allows another such tendency to increase.

Visual driver support system for traffic signs

It has been well documented that traffic accidents that can be avoided occur when the motorists miss or ignore traffic signs. With the attention of drivers getting diverted due to distractions like cell phone conversations, missing traffic signs has become more prevalent. Also, poor weather and other unfriendly driving conditions sometimes makes the motorists not to be alert all the time and see every traffic sign on the road. Besides, most cars do not have any form of traffic assistance. Because of heavy traffic and proliferation of traffic signs on the roads, there is a need for a system that assists the driver not to miss a traffic sign to reduce the probability of an accident. Since visual information is critical for driving, processed video signals from cameras have been chosen to assist drivers. These inexpensive cameras can be easily mounted on the automobile. The objective of the present investigation and the traffic system development is to recognize the traffic signs electronically and alert drivers. For the case study and the system development, five important and critical traffic signs have been selected. They are: STOP, NO ENTER, NO RIGHT TURN, NO LEFT TURN, and YIELD. The system was evaluated processing still pictures taken from the public roads, and the recognition results were presented in an analysis table to indicate the correct identifications and the false ones. The system reached the acceptable recognition rate of 80% for all five traffic signs. The processing rate was about three seconds. The capabilities of MATLAB, VLSI design platforms and coding have been used to generate a visual warning to complement the visual driver support system with a Field Programmable Gate Array (FPGA) on a XUP Virtex-II Pro Development System.

Using health-related quality of life instruments for children with long-term conditions : On the basis of a national quality registry system

Introduction: There has been a continuous development of new technologies in healthcare that are derived from national quality registries. However, this innovation needs to be translated into the workflow of healthcare delivery, to enable children with long-term conditions to get the best support possible to manage their health during everyday life. Since children living with long-term conditions experience different interference levels in their lives, healthcare professionals need to assess the impact of care on children’s day-to-day lives, as a complement to biomedical assessments. Aim: The overall aim of this thesis was to explore and describe the use of instruments about health-related quality of life (HRQOL) in outpatient care for children with long-term conditions on the basis of a national quality registry system. Methods: The research was conducted by using comparative, cross-sectional and explorative designs and data collection was performed by using different methods. The questionnaire DISABKIDS Chronic Generic Measure -37 was used as well as semi-structured interviews and video-recordings from consultations. Altogether, 156 children (8–18 years) and nine healthcare professionals participated in the studies. Children with Type 1 Diabetes (T1D) (n 131) answered the questionnaire DISABKIDS and children with rheumatic diseases, kidney diseases and T1D (n 25) were interviewed after their consultation at the outpatient clinic after the web-DISABKIDS had been used. In total, nine healthcare professionals used the HRQOL instrument as an assessment tool during the encounters which was video-recorded (n 21). Quantitative deductive content analysis was used to describe content in different HRQOL instruments. Statistical inference was used to analyse results from DISABKIDS and qualitative content analysis was used to analyse the interviews and video-recordings. Results: The findings showed that based on a biopsychosocial perspective, both generic and disease-specific instruments should be used to gain a comprehensive evaluation of the child’s HRQOL. The DISABKIDS instrument is applicable when describing different aspects of health concerning children with T1D. When DISABKIDS was used in the encounters, children expressed positive experiences about sharing their results with the healthcare professional. It was discovered that different approaches led to different outcomes for the child when the healthcare professionals were using DISABKIDS during the encounter. When an instructing approach is used, the child’s ability to learn more about their health and how to improve their health is limited. When an inviting or engaging approach is used by the professional, the child may become more involved during the conversations. Conclusions: It could be argued that instruments of HRQOL could be used as a complement to biomedical variables, to promote a biopsychosocial perspective on the child’s health. According to the children in this thesis, feedback on their results after answering to web-DISABKIDS is important, which implies that healthcare professionals need to prioritize time for discussions about results from HRQOL instruments in the encounters. If healthcare professionals involve the child in the discussion of the results of the HRQOL, misinterpreted answers could be corrected during the conversation. Concurrently, this claims that healthcare professionals invite and engage the child.

Developing a classification system of social communication functioning of preschool children with autism spectrum disorder

Background: Impairments in social communication are the hallmark feature of autism spectrum disorder (ASD). Operationalizing ‘severity’ in ASD has been challenging; thus stratifying by functioning has not been possible. Purpose: To describe the development of the Autism Classification System of Functioning: Social Communication (ACSF:SC) and evaluate its consistency within and between parent and professional ratings. Methodology: (1)ACSF:SC development based on focus groups and surveys involving parents, educators and clinicians familiar with preschoolers with ASD; and (2)Evaluation of the intra- and inter-rater agreement of the ACSF:SC using weighted kappa(кw). Results: Seventy-six participants were involved in the development process. Core characteristics of social communication were ascertained: communicative intent; communicative skills and reciprocity; and impact of environment. Five ACSF:SC levels were created and content-validated across participants. Best capacity and typical performance agreement ratings varied as follows: intra-rater on 41 children was кw=0.61-0.69 for parents and кw=0.71-0.95 for professionals; inter-rater between professionals were кw=0.47-0.61 and between parents and professionals кw=0.33-0.53. Conclusions: Perspectives from parents, and professionals informed ACSF:SC development, providing common descriptions of the levels of everyday communicative abilities of children with ASD to complement DSM-5. Rater agreement demonstrates the ACSF:SC can be utilized with acceptable consistency in comparison to other functional classification systems.