Uma abordagem baseada em redes neurais artificiais para a estimação de densidade de solo

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Sustentabilidade estrutural de um solo na região do alto Paranapanema/SP, submetido a dois sistemas de cultivo

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Desenvolvimento e avaliação de equipamentos e metodologia para determinação de parâmetros físicos do solo relacionados a dias trabalháveis com máquinas agrícolas

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Desenvolvimento radicular das culturas de feijão, soja e milho, sob diferentes manejos de solo, irrigadas por pivô central

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação dos atributos físicos de um argissolo cultivado com cana-de-açúcar em área com adequação de relevo, utilizando equipamento de preparo profundo e canteirizado do solo

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação da resistência ao cisalhamento de um solo tropical não saturado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alteração da fertilidade do solo como indicador do processo de antropização e presença de atividades não agrícolas no assentamento rural Horto Aimorés, municípios de Bauru e Pederneiras/SP =: Change of soil fertility as an indicator of the anthropization process and presence of non agricultural activities at the rural settlement Horto Aimorés, cities of Bauru and Pederneiras/ SP

Pós-graduação em Geografia - FCT

Impactos do manejo de um sistema plantio direto no crescimento e produtividade do arroz de terras altas e feijão de inverno em sucessão e nos atributos do solo

Pós-graduação em Agronomia - FEIS

Métodos de determinação da densidade do solo em diferentes sistemas de manejo

Soil bulk density is an attribute often used to characterize soil physical structure, being an indicator of soil compaction. The objective of this study was to compare the values ​​of bulk density measured by the paraffin sealed clod and volumetric ring methods in conventional, no-tillage and minimum tillage systems on a Dystroferric Red Nitosol, clayey, in Botucatu, SP. The experiment design was a 3x2 factorial arrangement in randomized block with four replications. The density values ​​obtained by the paraffin sealed clod method were statistically higher than those obtained by the volumetric ring method. There was no difference between the managements when comparing the values ​​of soil density obtained by the paraffin sealed clod method. The soil under conventional management showed lower density when comparing the values ​​of soil density obtained by the volumetric ring. The volumetric ring method was more sensitive to show differences between the management systems than the paraffin sealed clod method.

Mobilização do solo, velocidade de infiltração de água e taxa de cobertura do solo na grama esmeralda, sob manejos mecanizados

The excessive compaction of the soil observed in sod production systems, affects the physical attributes of the soil, which can influence the water infiltration into the soil and hence the rate of soil cover by turfgrasses and time of the sod production. To minimize the effects of soil compacting, some producers use soil preparation equipment that raises the soil on the surface but does not cause excessive roughness which may harm the quality of the sod. Thus, the aim of the present study was to evaluate the infiltration rate and soil cover rate due to different management mechanized in the zoysiagrass sod production. The experimental design had random plots and four replications. The treatments consisted of five mechanized managements of soil: witness (without the use of equipment); coulter blade disc harrow used once (1CB), coulter blade disc harrow used twice (2CB), surface chisel used once (1C), surface chisel and coulter blade disc harrow used once (1C + 1CB). The treatments with 2CB and 1C + 1CB provided greater basic water infiltration speed in the soil and higher rate of soil cover by the turfgrass. The rate of soil cover by turfgrass is positively correlated with water infiltration rate at 133 and 226 DAP, demonstrating the influence of managements used in zoysiagrass sod production and the increment in the infiltration rate of water. Soil preparation utilizing coulter blade disc harrow used twice or surface chisel and coulter blade disc harrow used once is recommended under the conditions this study was done.

Análise dos resultados do ensaio CBR realizado em condições variadas de umidade pós-compactação

O objetivo deste trabalho é avaliar a influência da variação do teor de umidade no valor do índice de suporte CBR de uma brita estabilizada granulometricamente e de seis solos coletados em rodovias do interior do Estado de São Paulo. Os seis solos estudados foram divididos em três pares, com curvas granulométricas próximas, mesma classificação HRB e USCS, sendo cada par formado por um solo de comportamento laterítico e um solo de comportamento não-laterítico. Os corpos-de-prova foram moldados na umidade ótima e massa específica seca máxima obtidos com os resultados do ensaio de Proctor normal. Os materiais foram analisados sob quatro condições de umidade: sem imersão, após alcançar metade da umidade de estabilização, após quatro e oito dias de imersão. Observou-se a distribuição da umidade interna dos corpos-de-prova para cada uma das situações. Foi analisada a influência do envelhecimento dos materiais solto e compactado por quatro dias e sem imersão, nos resultados dos ensaios de CBR. Com os resultados pôde-se correlacionar a influência da granulometria e da gênese dos materiais nos resultados dos ensaios de índice de suporte CBR nas diversas condições de umidade avaliadas.

Comportamento geotécnico de misturas de solo e resíduos de perfuração onshore

The drilling of wells for petroleum extraction generates rocks and soils fragments, among other residues. These fragments are denominated petroleum drilling gravel or simply petroleum drilling residue. On the sites of onshore exploration are formed big deposits of drilling gravel, an expensive final destination material. This work aims at evaluating the addition of drilling residue to a lateritic soil, as composite material, for construction of compacted fills for earth work projects. Soil and residue were evaluated by X-ray diffraction (XRD) and X-ray fluorescence (XRF) and by laboratory tests traditionally used in soil mechanics, as particle-size analysis of soils, determination of liquid and plasticity indexes and compaction test. After soil and residue characterization, soil-residue mixtures were studied, using dosages of 2,5%, 5%, 10%, and 15% of residue in relation to the dry soil mass. These mixtures were submitted to compaction test, CBR, direct shear test and consolidation test. The test results were compared to the current legislation of DNIT for compacted fill construction. The results showed that the mixtures presented the minimal necessary parameters, allowing, from the point of view of geotechnical analysis, the use of these mixtures for construction of compacted fills

Capacidade de carga de misturas de solo laterítico e desbastes de pneus

Government efforts have found some obstacles in achieving a better infrastructure regarding environmental preservation requirements. There is a need to develop new techniques that leave the big exploitation of environmental resources. This study measures the evaluation of the behavior of a composite formed by lateritic soil mix and tire buffings. In this way, a road embankment model was developed to assess the bearing capacity of the composite. This study measured the load capacity of the composites with 0%, 10%, 20% and 40% rubber mixed with the soil, by weight, iron plate loading tests on a simulated embankment in a metal box of 1.40 x 1.40 x 0.80 m. After four compaction layers of the composite, a plate test was performed, and then stress-settlement curves were obtained for the material. The embankments with 20% and 40% rubber content was difficult to compact. There was a significant reduction in the load capacity of the soil-plate system with increasing rubber content. The composite with the lowest loss of bearing capacity in relation to the reference soil was the one with a χ = 10%. In the load capacity tests, another aspect noted was the bearing capacity in terms of CBR. The results also show a gradual decrease in bearing capacity in the composites as with the rubber incorporation content increases. As in the plate load tests, the composite that had the lower bearing capacity loss was also that with 10% content.

Análise de microestrutura e de características geotécnicas de misturas de resíduo de polimento de porcelanato e solo

Brazil is a country in development, rich in natural resources. In order to grow sustainably, it is necessary to Brazil to preserve its environment, which is an expressive challenge, especially to industries, such as those producing ceramic materials. This study was developed using Porcelain Tile Polishing Residue (RPP) in blends with soil to build compacted fills. This residue is a slurry generated during the polishing process of porcelain tiles and contains powdery material from the polished tile, the abrasives used during the process and cooling water. The RPP was collected from a private company located in Conde/PB and it was mixed with a sandy-clayey soil, to build the fills. Laboratorial tests were conducted with pure soil, pure RPP and blends in proportions of 5%, 10%, 15% and 20% of RPP in addition to the dry mass of pure soil. The Chemical and Physical Characterization tests performed were: specific solid weight, grain size distribution, laser analysis of grain size distribution, Atterberg limits, X ray fluorescence, X ray diffraction, scanning electron microscopy and soil compaction,. The materials and blends were also compacted and direct shear tests and plate load tests were performed. Plate load tests were conducted using a circular plate with 30 cm diameter, on specimens of pure soil and 5% blend, compacted in a metallic box inside the Soil Mechanics Laboratory of the Federal University of Rio Grande do Norte, Brazil. Both mechanical tests performed were conducted under inundated conditions, willing to reduce the influence of soil suction. An evaluation of the results of the tests performed shows that RPP is a fine material, with grain size distribution smaller than 0,015mm, composed mainly of silica and alumina, and particles in angular shape. The soil was characterized as a clayey sand, geologically known as a lateritic soil, with high percentages of alumina and iron oxide, and particles with rounded shape. Both the Soil and the blends presented low plasticity, while the residue showed a medium plasticity. Direct shear tests showed that the addition of RPP did not cause major changes into blends’ friction angle data, however, it was possible to note that, for the proportions studied, that is a tendency of obtain lower shear stresses for higher percentages of RPP in the blends. Both pure soil and 5% mixture showed a punching disruption for the Plate load test. For this same test, the allowable stress for 5% mixture was 44% higher than the pure soil, and smaller vertical settlement results for all stresses.

Análise de microestrutura e de características geotécnicas de misturas de resíduo de polimento de porcelanato e solo

Brazil is a country in development, rich in natural resources. In order to grow sustainably, it is necessary to Brazil to preserve its environment, which is an expressive challenge, especially to industries, such as those producing ceramic materials. This study was developed using Porcelain Tile Polishing Residue (RPP) in blends with soil to build compacted fills. This residue is a slurry generated during the polishing process of porcelain tiles and contains powdery material from the polished tile, the abrasives used during the process and cooling water. The RPP was collected from a private company located in Conde/PB and it was mixed with a sandy-clayey soil, to build the fills. Laboratorial tests were conducted with pure soil, pure RPP and blends in proportions of 5%, 10%, 15% and 20% of RPP in addition to the dry mass of pure soil. The Chemical and Physical Characterization tests performed were: specific solid weight, grain size distribution, laser analysis of grain size distribution, Atterberg limits, X ray fluorescence, X ray diffraction, scanning electron microscopy and soil compaction,. The materials and blends were also compacted and direct shear tests and plate load tests were performed. Plate load tests were conducted using a circular plate with 30 cm diameter, on specimens of pure soil and 5% blend, compacted in a metallic box inside the Soil Mechanics Laboratory of the Federal University of Rio Grande do Norte, Brazil. Both mechanical tests performed were conducted under inundated conditions, willing to reduce the influence of soil suction. An evaluation of the results of the tests performed shows that RPP is a fine material, with grain size distribution smaller than 0,015mm, composed mainly of silica and alumina, and particles in angular shape. The soil was characterized as a clayey sand, geologically known as a lateritic soil, with high percentages of alumina and iron oxide, and particles with rounded shape. Both the Soil and the blends presented low plasticity, while the residue showed a medium plasticity. Direct shear tests showed that the addition of RPP did not cause major changes into blends’ friction angle data, however, it was possible to note that, for the proportions studied, that is a tendency of obtain lower shear stresses for higher percentages of RPP in the blends. Both pure soil and 5% mixture showed a punching disruption for the Plate load test. For this same test, the allowable stress for 5% mixture was 44% higher than the pure soil, and smaller vertical settlement results for all stresses.