Drugs Associated with Hepatotoxicity and their Reporting Frequency of Liver Adverse Events in VigiBase (TM) Unified List Based on International Collaborative Work

BACKGROUND Challenges exist in the clinical diagnosis of drug-induced liver injury (DILI) and in obtaining information on hepatotoxicity in humans. OBJECTIVE (i) To develop a unified list that combines drugs incriminated in well vetted or adjudicated DILI cases from many recognized sources and drugs that have been subjected to serious regulatory actions due to hepatotoxicity; and (ii) to supplement the drug list with data on reporting frequencies of liver events in the WHO individual case safety report database (VigiBase). DATA SOURCES AND EXTRACTION (i) Drugs identified as causes of DILI at three major DILI registries; (ii) drugs identified as causes of drug-induced acute liver failure (ALF) in six different data sources, including major ALF registries and previously published ALF studies; and (iii) drugs identified as being subjected to serious governmental regulatory actions due to their hepatotoxicity in Europe or the US were collected. The reporting frequency of adverse events was determined using VigiBase, computed as Empirical Bayes Geometric Mean (EBGM) with 90% confidence interval for two customized terms, 'overall liver injury' and 'ALF'. EBGM of >or=2 was considered a disproportional increase in reporting frequency. The identified drugs were then characterized in terms of regional divergence, published case reports, serious regulatory actions, and reporting frequency of 'overall liver injury' and 'ALF' calculated from VigiBase. DATA SYNTHESIS After excluding herbs, supplements and alternative medicines, a total of 385 individual drugs were identified; 319 drugs were identified in the three DILI registries, 107 from the six ALF registries (or studies) and 47 drugs that were subjected to suspension or withdrawal in the US or Europe due to their hepatotoxicity. The identified drugs varied significantly between Spain, the US and Sweden. Of the 319 drugs identified in the DILI registries of adjudicated cases, 93.4% were found in published case reports, 1.9% were suspended or withdrawn due to hepatotoxicity and 25.7% were also identified in the ALF registries/studies. In VigiBase, 30.4% of the 319 drugs were associated with disproportionally higher reporting frequency of 'overall liver injury' and 83.1% were associated with at least one reported case of ALF. CONCLUSIONS This newly developed list of drugs associated with hepatotoxicity and the multifaceted analysis on hepatotoxicity will aid in causality assessment and clinical diagnosis of DILI and will provide a basis for further characterization of hepatotoxicity.

Electronic voting system for computer supported collaborative learning

The EVS4CSCL project starts in the context of a Computer Supported Collaborative Learning environment (CSCL). Previous UOC projects created a CSCL generic platform (CLPL) to facilitate the development of CSCL applications. A discussion forum (DF) was the first application developed over the framework. This discussion forum was different from other products on the marketplace because of its focus on the learning process. The DF carried out the specification and elaboration phases from the discussion learning process but there was a lack in the consensus phase. The consensus phase in a learning environment is not something to be achieved but tested. Common tests are done by Electronic Voting System (EVS) tools, but consensus test is not an assessment test. We are not evaluating our students by their answers but by their discussion activity. Our educational EVS would be used as a discussion catalyst proposing a discussion about the results after an initial query or it would be used after a discussion period in order to manifest how the discussion changed the students mind (consensus). It should be also used by the teacher as a quick way to know where the student needs some reinforcement. That is important in a distance-learning environment where there is no direct contact between the teacher and the student and it is difficult to detect the learning lacks. In an educational environment, assessment it is a must and the EVS will provide direct assessment by peer usefulness evaluation, teacher marks on every query created and indirect assessment from statistics regarding the user activity.

Computational Representation of Collaborative Learning Flow Patterns Using IMS Learning Design

The identification and integration of reusable and customizable CSCL (Computer Supported Collaborative Learning) may benefit from the capture of best practices in collaborative learning structuring. The authors have proposed CLFPs (Collaborative Learning Flow Patterns) as a way of collecting these best practices. To facilitate the process of CLFPs by software systems, the paper proposes to specify these patterns using IMS Learning Design (IMS-LD). Thus, teachers without technical knowledge can particularize and integrate CSCL tools. Nevertheless, the support of IMS-LD for describing collaborative learning activities has some deficiencies: the collaborative tools that can be defined in these activities are limited. Thus, this paper proposes and discusses an extension to IMS-LD that enables to specify several characteristics of the use of tools that mediate collaboration. In order to obtain a Unit of Learning based on a CLFP, a three stage process is also proposed. A CLFP-based Unit of Learning example is used to illustrate the process and the need of the proposed extension.

El Misterio de la biblioteca Mil.lènium o cómo promover relaciones colaborativas desde la participación del alumnado = The Mystery of the Mil.lènium Library: How to Promote Collaborative Relationships Through Student Participation

La pedagogía crítica acentúa la falta de neutralidad de la escuela respecto a las relaciones de poder que existen en la sociedad. Su propuesta consiste en modificar las relaciones de poder en el aula en el sentido de transformar las relaciones coercitivas –las que reproducen las relaciones existentes– en relaciones colaborativas partiendo del reconocimiento y la participación de los alumnos en las actividades escolares. Desde esta perspectiva, uno de los objetivos de las actividades es que los niños produzcan «textos identitarios», entendidos como artefactos que los alumnos se pueden apropiar para promover su desarrollo cognitivo. El artículo muestra el trabajo educativo integrado desde Educación Infantil hasta 6.º de Primaria de una escuela de la provincia de Girona en la que el 97% de los alumnos es de origen extranjero y cuyo propósito es incrementar las habilidades lingüísticas orales y escritas en la lengua escolar, así como la utilización de otros lenguajes multimedia. La unidad didáctica consiste en la elaboración de un cuento a lo largo de un curso escolar por parte de todo el alumnado con la ayuda de los profesores, de dos autores y de tres ilustradores. Cada ciclo escolar decide los personajes y el escenario y explicita textualmente el transcurso de la acción. Los ilustradores producen las imágenes y los autores posibilitan la transición de aquello que ha elaborado un ciclo al producto del siguiente. La actividad basada en la participación y la utilización de procedimientos democráticos de decisión se inserta en la propuesta educativa y lingüística de la escuela, así como en sus concreciones curriculares. Los resultados muestran que los textos construidos por los niños se apoyan en sus «fondos de conocimiento» sociales y familiares y constituyen una fuente de progreso en la consecución de las competencias básicas y en la construcción de valores democráticos

Remote collaborative multi-user informal learning experiences: design and evaluation

This paper presents a customizable system used to develop a collaborative multi-user problem solving game. It addresses the increasing demand for appealing informal learning experiences in museum-like settings. The system facilitates remote collaboration by allowing groups of learners tocommunicate through a videoconferencing system and by allowing them to simultaneously interact through a shared multi-touch interactive surface. A user study with 20 user groups indicates that the game facilitates collaboration between local and remote groups of learners. The videoconference and multitouch surface acted as communication channels, attracted students’ interest, facilitated engagement, and promoted inter- and intra-group collaboration—favoring intra-group collaboration. Our findings suggest that augmentingvideoconferencing systems with a shared multitouch space offers newpossibilities and scenarios for remote collaborative environments and collaborative learning.

Assessing chronic disease management in European health systems : concepts and approaches

This book comprises two volumes and builds on the findings of the DISMEVAL project (Developing and validating DISease Management EVALuation methods for European health care systems), funded under the European Union's (EU) Seventh Framework Programme (FP7) (Agreement no. 223277). DISMEVAL was a three-year European collaborative project conducted between 2009 and 2011. It contributed to developing new research methods and generating the evidence base to inform decision-making in the field of chronic disease management evaluation (www.dismeval.eu). In this book, we report on the findings of the project's first phase, capturing the diverse range of contexts in which new approaches to chronic care are being implemented and evaluating the outcomes of these initiatives using an explicit comparative approach and a unified assessment framework. In this first volume, we describe the range of approaches to chronic care adopted in 12 European countries. By reflecting on the facilitators and barriers to implementation, we aim to provide policy-makers and practitioners with a portfolio of options to advance chronic care approaches in a given policy context.

Web user interface architecture for advanced planning and scheduling systems Case: Nokia Demand / Supply Planning Applications

In modem hitec industry Advanced Planning and Scheduling (APS) systems provide the basis for e-business solutions towards the suppliers and the customers. One objective of this thesis was to clarify the modem supply chain management with the APS systems and especially concentrate on the area of Collaborative Planning. In order Advanced Planning and Scheduling systems to be complete and usable, user interfaces are needed. Current Visual Basic user interfaces have faced many complaints and arguments from the users as well as from the development team. This thesis is trying to analyze the reasons and causes for the encountered problems and also provide ways to overcome them. The decision has been made to build the new user interfaces to be Web-enabled. Therefore another objective of this thesis was to research and find suitable technologies for building the Web-based user interfaces for Advanced Planning and Scheduling Systems in Nokia Demand/Supply Planning business area. Comparison between the most suitable technologies is made. Usability issues of Web-enabled user interfaces are also covered. The empirical part of the thesis includes design and implementation of a Web-based user interface with the chosen technology for a particular APS module that enables Collaborative Planning with suppliers.

Robots and robotic systems for the electronics and telecommunication industry

Tämä diplomityö tutkii elektroniikka- ja telekommunikaatioteollisuutta sekä siihen läheisesti liittyviä robotteja ja robottijärjestelmiä. Tavoitteena on määrittää E&T-teollisuuden prosesseihin soveltuvien robottien testausmenetelmä. Tavoitteena on myös selvittää kahden ABB:n robotin soveltuvuutta E&T-teollisuuden tarpeisiin. Muutamia systemaattisia valmistusjärjestelmien suunnitteluun soveltuvia menetelmiä ja apuvälineitä on myös käsitelty. Alussa työ keskittyy elektroniikka- ja telekommunikaatioteollisuuden nykytilan tutkimiseen sekä siellä vallitsevien ja ennustettujen trendien kartoitukseen. Kohdat “Collaborative manufacturing” ja E&T-teollisuuden valmistusjärjestelmille asettamat vaatimukset käydään yksityiskohtaisesti läpi. Tutkimuksen pääkohteina ovat robotit, erityisesti ABB:n IRB 140 ja IRB 340 sekä robottien testausmenetelmän määrittäminen. Työssä käydään läpi IRB 340:llä suoritetut testit, jotka tehtiin sekä konenäköjärjestelmää apuna käyttäen että ilman. Myös TTKK:lla suoritetut robottitestit on käyty läpi. Robottien testituloksia on analysoitu ja vertailtu muihin robotteihin. Testausmenetelmät perustuvat ISO 9283 standardiin. Viimeinen osa työstä esittelee robottijärjestelmien systemaattiseen suunnitteluun soveltuvia menetelmiä ja apuvälineitä. Esillä ovat mm. Modular function deployment (MFD) ja The system design method (SDM).

Towards increased productivity and quality in software development using agile, lean and collaborative approaches

Dagens programvaruindustri står inför alltmer komplicerade utmaningar i en värld där programvara är nästan allstädes närvarande i våra dagliga liv. Konsumenten vill ha produkter som är pålitliga, innovativa och rika i funktionalitet, men samtidigt också förmånliga. Utmaningen för oss inom IT-industrin är att skapa mer komplexa, innovativa lösningar till en lägre kostnad. Detta är en av orsakerna till att processförbättring som forskningsområde inte har minskat i betydelse. IT-proffs ställer sig frågan: “Hur håller vi våra löften till våra kunder, samtidigt som vi minimerar vår risk och ökar vår kvalitet och produktivitet?” Inom processförbättringsområdet finns det olika tillvägagångssätt. Traditionella processförbättringsmetoder för programvara som CMMI och SPICE fokuserar på kvalitets- och riskaspekten hos förbättringsprocessen. Mer lättviktiga metoder som t.ex. lättrörliga metoder (agile methods) och Lean-metoder fokuserar på att hålla löften och förbättra produktiviteten genom att minimera slöseri inom utvecklingsprocessen. Forskningen som presenteras i denna avhandling utfördes med ett specifikt mål framför ögonen: att förbättra kostnadseffektiviteten i arbetsmetoderna utan att kompromissa med kvaliteten. Den utmaningen attackerades från tre olika vinklar. För det första förbättras arbetsmetoderna genom att man introducerar lättrörliga metoder. För det andra bibehålls kvaliteten genom att man använder mätmetoder på produktnivå. För det tredje förbättras kunskapsspridningen inom stora företag genom metoder som sätter samarbete i centrum. Rörelsen bakom lättrörliga arbetsmetoder växte fram under 90-talet som en reaktion på de orealistiska krav som den tidigare förhärskande vattenfallsmetoden ställde på IT-branschen. Programutveckling är en kreativ process och skiljer sig från annan industri i det att den största delen av det dagliga arbetet går ut på att skapa något nytt som inte har funnits tidigare. Varje programutvecklare måste vara expert på sitt område och använder en stor del av sin arbetsdag till att skapa lösningar på problem som hon aldrig tidigare har löst. Trots att detta har varit ett välkänt faktum redan i många decennier, styrs ändå många programvaruprojekt som om de vore produktionslinjer i fabriker. Ett av målen för rörelsen bakom lättrörliga metoder är att lyfta fram just denna diskrepans mellan programutvecklingens innersta natur och sättet på vilket programvaruprojekt styrs. Lättrörliga arbetsmetoder har visat sig fungera väl i de sammanhang de skapades för, dvs. små, samlokaliserade team som jobbar i nära samarbete med en engagerad kund. I andra sammanhang, och speciellt i stora, geografiskt utspridda företag, är det mera utmanande att införa lättrörliga metoder. Vi har nalkats utmaningen genom att införa lättrörliga metoder med hjälp av pilotprojekt. Detta har två klara fördelar. För det första kan man inkrementellt samla kunskap om metoderna och deras samverkan med sammanhanget i fråga. På så sätt kan man lättare utveckla och anpassa metoderna till de specifika krav som sammanhanget ställer. För det andra kan man lättare överbrygga motstånd mot förändring genom att introducera kulturella förändringar varsamt och genom att målgruppen får direkt förstahandskontakt med de nya metoderna. Relevanta mätmetoder för produkter kan hjälpa programvaruutvecklingsteam att förbättra sina arbetsmetoder. När det gäller team som jobbar med lättrörliga och Lean-metoder kan en bra uppsättning mätmetoder vara avgörande för beslutsfattandet när man prioriterar listan över uppgifter som ska göras. Vårt fokus har legat på att stöda lättrörliga och Lean-team med interna produktmätmetoder för beslutsstöd gällande så kallad omfaktorering, dvs. kontinuerlig kvalitetsförbättring av programmets kod och design. Det kan vara svårt att ta ett beslut att omfaktorera, speciellt för lättrörliga och Lean-team, eftersom de förväntas kunna rättfärdiga sina prioriteter i termer av affärsvärde. Vi föreslår ett sätt att mäta designkvaliteten hos system som har utvecklats med hjälp av det så kallade modelldrivna paradigmet. Vi konstruerar även ett sätt att integrera denna mätmetod i lättrörliga och Lean-arbetsmetoder. En viktig del av alla processförbättringsinitiativ är att sprida kunskap om den nya programvaruprocessen. Detta gäller oavsett hurdan process man försöker introducera – vare sig processen är plandriven eller lättrörlig. Vi föreslår att metoder som baserar sig på samarbete när processen skapas och vidareutvecklas är ett bra sätt att stöda kunskapsspridning på. Vi ger en översikt över författarverktyg för processer på marknaden med det förslaget i åtanke.

Collaborative information behaviour : a case study of two research groups

The aim of the licentiate thesis is to examine researchers' information practices in research groups. The researchers were involved with study communication and media related issues within Social Sciences and Humanities Faculties. The theoretical framework of the study comprises the new holistic models of information seeking (for example: Meho and Tibbo, 2003; Seldén, 1999) and the collective aspects of information behaviour (Prekop, 2002 ; Talja, 2002; Talja and Hansen, 2006). The research questions are: 1. How do scholars seek information in research groups? 2 What kind of collaborative information behaviour occurs in the research groups? The research data was gathered by interviews and observations. Three meetings of a research group at the University of Tampere were observed during the autumn of 2004. The group members and the group leader of the research group were interviewed in the spring of 2005. The research group members and the group leader of a research group at the University of Jyväskylä were interviewed in the autumn of 2005. Altogether, two research group leaders and eight researchers were interviewed. The significance of the research group for information seeking is more important in closeknit research groups than in rather loose research groups. The significance of the research group for information seeking can be at least threefold. First, research group members can inform the group about relevant information resources and potential library or other information services. Second, the research group can to some extent compensate for the information seeking systems of libraries by distributing material and information resources. Third, information seeking can be carried out in collaboration in research groups. The significance of the research group was found to be most important in informing about new information services and marketing library systems. Recommendations from colleagues were often needed to mobilize researchers into using new library services. The significance of colleagues in informing about library services is in line with earlier studies. The present study showed that sometimes information from colleagues was regarded as more important than information distributed directly by the local library. A culture of information sharing, including mutual trust, seemed mainly to be reflected in collaboration and collaborative information seeking in the research groups studied. The timing of the onset of individual research seemed to be related to the information sharing culture and social networks in research groups. The simultaneous onset of the research work by group members seemed to promote the growth of unbiased collaboration, also in information seeking.

Enhancing the development of military capabilities by a systems approach

The political environment of security and defence has changed radically in the Western industrialised world since the Cold War. As a response to these changes, since the beginning of the twenty-first century, most Western countries have adopted a ‘capabilities-based approach’ to developing and operating their armed forces. More responsive and versatile military capabilities must be developed to meet the contemporary challenges. The systems approach is seen as a beneficial means of overcoming traps in resolving complex real -world issues by conventional thinking. The main objectives of this dissertation are to explore and assess the means to enhance the development of military capabilities both in concept development and experimentation (CD&E) and in national defence materiel collaboration issues. This research provides a unique perspective, a systems approach, to the development areas of concern in resolving complex real-world issues. This dissertation seeks to increase the understanding of the military capability concept both as a whole and with in its life cycle. The dissertation follows the generic functionalist systems methodology by Jackson. The methodology applies a comprehensive set of constitutive rules to examine the research objectives. This dissertation makes contribution to current studies about military capability. It presents two interdepen dent conceptual capability models: the comprehensive capability meta-model (CCMM) and the holistic capability life cycle model (HCLCM). These models holistically and systematically complement the existing, but still evolving, understanding of military capability and its life cycle. In addition, this dissertation contributes to the scientific discussion of defence procurement in its broad meaning by introducing the holistic model about the national defence materiel collaboration between the defence forces, defence industry and academia. The model connects the key collaborative mechanisms, which currently work in isolation from each other, and take into consideration the unique needs of each partner. This dissertation contributes empirical evidence regarding the benefits of enterprise architectures (EA) to CD&E. The EA approach may add value to traditional concept development by increasing the clarity, consistency and completeness of the concept. The most important use considered for EA in CD&E is that it enables further utilisation of the concept created in the case project.

Preparing for CRIS: Challenges and Opportunities for Systems Integration at Finnish Universities

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Collaborative Projects Using Wikis

This case study describes how wikis are used in group projects by postgraduate students on ENVS6011 Environmental Management Systems.

Collaborative recommender agents based on case-based reasoning and trust

La comunitat científica que treballa en Intel·ligència Artificial (IA) ha dut a terme una gran quantitat de treball en com la IA pot ajudar a les persones a trobar el que volen dins d'Internet. La idea dels sistemes recomanadors ha estat extensament acceptada pels usuaris. La tasca principal d'un sistema recomanador és localitzar ítems, fonts d'informació i persones relacionades amb els interessos i preferències d'una persona o d'un grup de persones. Això comporta la construcció de models d'usuari i l'habilitat d'anticipar i predir les preferències de l'usuari. Aquesta tesi està focalitzada en l'estudi de tècniques d'IA que millorin el rendiment dels sistemes recomanadors. Inicialment, s'ha dut a terme un anàlisis detallat de l'actual estat de l'art en aquest camp. Aquest treball ha estat organitzat en forma de taxonomia on els sistemes recomanadors existents a Internet es classifiquen en 8 dimensions generals. Aquesta taxonomia ens aporta una base de coneixement indispensable pel disseny de la nostra proposta. El raonament basat en casos (CBR) és un paradigma per aprendre i raonar a partir de la experiència adequat per sistemes recomanadors degut als seus fonaments en el raonament humà. Aquesta tesi planteja una nova proposta de CBR aplicat al camp de la recomanació i un mecanisme d'oblit per perfils basats en casos que controla la rellevància i edat de les experiències passades. Els resultats experimentals demostren que aquesta proposta adapta millor els perfils als usuaris i soluciona el problema de la utilitat que pateixen el sistemes basats en CBR. Els sistemes recomanadors milloren espectacularment la qualitat dels resultats quan informació sobre els altres usuaris és utilitzada quan es recomana a un usuari concret. Aquesta tesi proposa l'agentificació dels sistemes recomanadors per tal de treure profit de propietats interessants dels agents com ara la proactivitat, la encapsulació o l'habilitat social. La col·laboració entre agents es realitza a partir del mètode de filtratge basat en la opinió i del mètode col·laboratiu de filtratge a partir de confiança. Els dos mètodes es basen en un model social de confiança que fa que els agents siguin menys vulnerables als altres quan col·laboren. Els resultats experimentals demostren que els agents recomanadors col·laboratius proposats milloren el rendiment del sistema mentre que preserven la privacitat de les dades personals de l'usuari. Finalment, aquesta tesi també proposa un procediment per avaluar sistemes recomanadors que permet la discussió científica dels resultats. Aquesta proposta simula el comportament dels usuaris al llarg del temps basat en perfils d'usuari reals. Esperem que aquesta metodologia d'avaluació contribueixi al progrés d'aquesta àrea de recerca.