954 resultados para Chemical characterization
Resumo:
Espresso spent coffee grounds were chemically characterized to predict their potential, as a source of bioactive compounds, by comparison with the ones from the soluble coffee industry. Sampling included a total of 50 samples from 14 trademarks, collected in several coffee shops and prepared with distinct coffee machines. A high compositional variability was verified, particularly with regard to such water-soluble components as caffeine, total chlorogenic acids (CGA), and minerals, supported by strong positive correlations with total soluble solids retained. This is a direct consequence of the reduced extraction efficiency during espresso coffee preparation, leaving a significant pool of bioactivity retained in the extracted grounds. Besides the lipid (12.5%) and nitrogen (2.3%) contents, similar to those of industrial coffee residues, the CGA content (478.9 mg/100 g), for its antioxidant capacity, and its caffeine content (452.6 mg/100 g), due to its extensive use in the food and pharmaceutical industries, justify the selective assembly of this residue for subsequent use.
Resumo:
Dissertação de Mestrado, Engenharia e Gestão de Sistemas de Água, 26 de Maio de 2015, Universidade dos Açores.
Resumo:
The main goal of this research study was the removal of Cu(II), Ni(II) and Zn(II) from aqueous solutions using peanut hulls. This work was mainly focused on the following aspects: chemical characterization of the biosorbent, kinetic studies, study of the pH influence in mono-component systems, equilibrium isotherms and column studies, both in mono and tri-component systems, and with a real industrial effluent from the electroplating industry. The chemical characterization of peanut hulls showed a high cellulose (44.8%) and lignin (36.1%) content, which favours biosorption of metal cations. The kinetic studies performed indicate that most of the sorption occurs in the first 30 min for all systems. In general, a pseudo-second order kinetics was followed, both in mono and tri-component systems. The equilibrium isotherms were better described by Freundlich model in all systems. Peanut hulls showed higher affinity for copper than for nickel and zinc when they are both present. The pH value between 5 and 6 was the most favourable for all systems. The sorbent capacity in column was 0.028 and 0.025 mmol g-1 for copper, respectively in mono and tri-component systems. A decrease of capacity for copper (50%) was observed when dealing with the real effluent. The Yoon-Nelson, Thomas and Yan’s models were fitted to the experimental data, being the latter the best fit.
Resumo:
Proceedings of the Chemistry and Conservation Science
Resumo:
Mestrado em Engenharia Geotécnica e Geoambiente
Resumo:
Thesis for the Master degree in Structural and Functional Biochemistry
Resumo:
Tese de Doutoramento em Biologia de Plantas
Resumo:
Dissertação de mestrado em Geociências (área de especialização em Recursos Geológicos)
Resumo:
Dissertação de mestrado em Genética Molecular
Resumo:
Dissertação de mestrado em Genética Molecular
Resumo:
BACKGROUND: carbon nanotubes (CNT) can have adverse effects on health. Therefore, minimizing the risk associated with CNT exposure is of crucial importance. The aim of this work was to evaluate if coating multi-walled CNT (MWCNT) with polymers could modify their toxicity, thus representing a useful strategy to decrease adverse health effects of CNT. We used industrially-produced MWCNT uncoated (NT1) or coated (50/50 wt%) with acid-based (NT2) or polystyrene-based (NT3) polymer, and exposed murine macrophages (RAW 264.7 cell line) or Balb/c mice by intratracheal administration. Biological experiments were performed both in vitro and in vivo, examining time- and dose-dependent effects of CNT, in terms of cytotoxicity, expression of genes and proteins related to oxidative stress, inflammation and tissue remodeling, cell and lung tissue morphology (optical and transmission electron microscopy), and bronchoalveolar lavage fluid content analysis.RESULTS: extensive physico-chemical characterization of MWCNT was performed, and showed, although similar dimensions for the 3 MWCNT, a much smaller specific surface area for NT2 and NT3 as compared to NT1 (54.1, 34 and 227.54 m(2)/g respectively), along with different surface characteristics. MWCNT-induced cytotoxicity, oxidative stress, and inflammation were increased by acid-based and decreased by polystyrene-based polymer coating both in vitro in murine macrophages and in vivo in lung of mice monitored for 6 months.CONCLUSIONS: these results demonstrate that coating CNT with polymers, without affecting their intrinsic structure, may constitute a useful strategy for decreasing CNT toxicity, and may hold promise for improving occupational safety and that of general the user.
Resumo:
In general, Latosols have low levels of available P, however, the influence of the parent material seems to be decisive in defining the pool and predominant form of P in these soils. This study evaluated P availability by extraction with Mehlich-1 (M-1) and Ion Exchange Resin (IER), from samples of B horizons of Ferric and Perferric Latosols developed from different parent materials. To this end, in addition to the physical and chemical characterization of soils, 10 sequential extractions were performed with M-1 and IER from samples of B horizons (depth between 0.8 and 1.0 m). Total contents of Ca, P, Fe, Al, and Ti were determined after digestion with nitric, hydrofluoric and perchloric acids. The effects of sequential P extractions on Fe oxides were also evaluated from the analyses of dithionite-citrate-bicarbonate and ammonium acid oxalate. The high similarity between contents of P accumulated after sequential extractions with M-1 and IER in soils developed on tuffite indicated a predominance of P-Ca. Higher contents of P after a single IER extraction show greater efficiency in P removal from highly weathered soils, as from the Latosols studied here. The P contents also show the high sensitivity of extractant M-1 in highly buffered soils. Furthermore, a single extraction with extractant M-1 or IER is not sufficient to estimate the amount of labile P in these soils.
Hydrogen isotope fractionations between amphiboles, micas, and fluids in alkaline igneous intrusions
Resumo:
RÉSUMÉ DE LA THÈSE Les teneurs des amphiboles en éléments majeurs et en isotopes stables ont été analysées dans plusieurs complexes ignés alcalins et hyperalcalins, dans le but de déterminer l'importance des variations de composition des minéraux pour le fractionnement isotopique de l'hydrogène dans un système naturel minéral-magma-fluide. Cette étude se concentre principalement sur les syénites néphéliniques de complexes intrusifs alcalins bien connus mais à chimie variable, dont les amphiboles, ainsi que d'autres silicates hydratés tels que micas et eudialytes, lorsque cela était possible, ont été séparés. L'intérêt principal s'est porté sur le complexe alcalin d'Ilímaussaq de la Province du Gardar, au Sud du Groenland. Dans une optique de comparaison, nous avons collecté et analysé d'autres échantillons provenant du complexe de Tugtutôq (Sud Groenland), des complexes de Khibina et Lovozero (Péninsule de Kola, Russie), du Mont St-Hilaire et du Mont Royal (Canada) et de 6 autres du nord-ouest de la Namibie (Cape Cross, Okenyenya, Messum, Etaneno, Kalkfeld,et Okorusu). Les compositions isotopiques de l'hydrogène des amphiboles des ces différentes zones présentent de grandes variations (-227 à -700/00), ce qui est atypique pour des magmas d'origine mantellique. Les valeurs comprises entre -80 et -400/00 indiquent une provenance du manteau. Ces larges variations de compositions ainsi que l'extrême appauvrissement en isotope lourd de l'hydrogène (D), en comparaison avec d'autres roches ignées, semblent être propres.aux roches alcalines et hyperalcalines de ce type, ce qui indiquerait un processus commun. Les différents complexes alcalins choisis présentent un large intervalle de composition chimique des amphiboles. La caractérisation des amphiboles par microscopie électronique et par spectroscopie Mössbauer contribuent à observer le contrôle du Fe sur le fractionnement des isotopes de l'hydrogène. En effet, cela a mis en évidence un contrôle du Fe sur le fractionnement et même, dans le cas du complexe hyperalcalin d'Ilímaussaq, une relation entre le rapport Fei3+/FeT et les variations du rapport D/H. Les complexes étudiés diffèrent de par leur index agpaïtique (Na+K/Al) et également de par leur contenu en fer. Les plus hautes valeurs en Fe (27-35 wt%) et en éléments alcalins dans les amphiboles, ainsi que les teneurs de D/H les plus basses et leur grande variation, sont celles du complexe d'Ilímaussaq. Les amphiboles de la Péninsule de Kola et du Canada sont similaires, mais toutefois moins appauvries en D. En ce qui concerne les amphiboles des complexes du NO de la Namibie, elles présentent des compositions isotopiques de l'hydrogène magmatiques normales (-73 à -100 0/00), contiennent moins de Fe (15-17 wt%) et sont fortement enrichies en Ca et moins en Na. Dans ce cas, l'alcalinité est moins importante en comparaison des autres complexes étudiés. En dehors des teneurs en éléments alcalins des amphiboles, l'alcalinité des fluides s'avère également un facteur important, ce qui est cohérent avec certaines suggestions à partir de systèmes expérimentaux. Afin de mieux contraindre ce facteur, des expériences d'échanges hydrothermaux entre les amphiboles et les fluides de salinité différente ont été effectuées en simulant des conditions naturelles. L'approximation d'amphiboles naturelles de complexes ignés alcalins, couplée aux expériences d'échange, aide à préciser les facteurs contrôlant le fractionnement des isotopes de l'hydrogène dans les roches alcalines. Les valeurs extrêmement basses de 3D des amphiboles de ces complexes alcalins peuvent être dues à une combinaison de différents facteurs, telles qu'une haute alcalinité, une haute teneur en Fe et une faible profondeur d'intrusion. Les grandes variations ainsi que les faibles valeurs de SD des amphiboles étudiées peuvent résulter d'un processus magmatique interne et il est peu probable que de l'eau météorique soit impliquée et/ou que le dégazage magmatique ait joué un rôle. THESIS ABSTRACT Major element and stable isotope compositions of amphiboles were analyzed from a number of alkaline and peralkaline igneous complexes in order to determine the importance of compositional variations in minerals to hydrogen isotope fractionations in natural mineral-melt-fluid systems. The thesis mainly focuses on nepheline syenites of well-studied, but chemically variable alkaline intrusive rocks, from which amphiboles and, if possible, other hydrous silicates such as micas and eudialytes were separated. The system of primary interest was the alkaline Ilímaussaq Complex of the Gardar Province of South Greenland. For the purpose of comparison additional samples were collected and examined from the Tugtutôq Complex (South Greenland), the Khibina and Lovozero Complexes (Kola Peninsular, Russia), Mount St-Hilaire and Mount Royal (Canada) and six further complexes from NW Namibia (Cape Cross, Okenyenya, Messum, Etaneno, Kalkfeld, and Okorusu). The hydrogen isotope compositions of amphiboles from the localities studied differ greatly, which is atypical for amphiboles from mantle, range between - 227 and - 700/00 (latter compatible with a simple mantle origin). As this wide range in compositions and the extreme depletion in the heavy hydrogen isotope (D) content relative to other igneous rocks appear to be unique to alkaline to peralkaline rocks of this type, a common process is indicated. The different alkaline complexes chosen cover a wide range of amphibole chemical compositions. Detailed chemical characterization of amphiboles by electron microprobe and Mössbauer spectroscopy analyses helped to constrain the control of Fe on the H-isotope fractionations. Complete characterization of the chemical compositions of the amphiboles support Fe-control on fractionations and at least for the peralkaline Ilímaussaq complex a relationship between Fe3+/FeT ratios and variations in D/H. The studied complexes differ in their agpaitic index (Na+K/Al) and also in their Fe-content. The most iron (27-35 wt. %) and alkaline element rich amphiboles, with the lowermost D/H ratio, as well with very wide range, are the ones from Ilímaussaq complex. Similar, but less D depleted amphiboles are from the Kola Peninsula and the Canadian localities. The complexes described from NW Namibia have amphiboles with normal magmatic hydrogen isotope composition (-730/00 to -1000/00), and have less Fe-content (15-17 wt. %), and are more Ca-and less Na-rich. In this case alkalinity is not that important in comparison to the other studied complexes. Beside the alkaline element contents in the amphiboles, the alkalinity of the fluids has been found to be an important factor, in conjunction with earlier suggestions from experimental systems. To further constrain this factor, hydrothermal exchange experiments between amphiboles and fluids of different salinity simulating natural conditions were performed. The approach of examining natural amphiboles from alkaline igneous complexes in parallel to performing exchange experiments - helped to further constrain the factors controlling the H-isotope fractionations in alkaline rocks. The observed changes between the hydrogen and oxygen isotope compositions of amphiboles and fluids before and after the experiments suggest that another phase was produced during the experiments, which influenced the final hydrogen isotope composition of the system. This presumably hydrous phase has also influenced the Fe3 +/Fe2+ ratio of the amphiboles, which became more oxidized. The extremely low SD values of amphiboles in these alkaline complexes may be due to a combination of different factors such as high alkalinity, high Fe-content, and shallow intrusion depths. This wide range and the low SD values of the amphiboles studied might be a result of internal, magmatic processes and it is unlikely that meteoric water was involved and/or magmatic degassing played an important role. RÉSUMÉ DE LA THÈSE (pour le grand public) Fractionnement isotopique de l'hydrogène entre amphiboles, micas et fluides dans des intrusions alcalines Zsófia Wáczek Directeur de thèse, Prof. Torsten W. Vennemann Institut de Minéralogie et Géochimie, Université de Lausanne Les roches alcalines et celles qui leurs sont associées sont des sources importantes de nombreux minéraux et minerais, tels l'apatite, le niobium, le diamant et autres pierres précieuses. Cette étude se concentre sur des complexes alcalins localisés dans le sud du Groenland, au Canada, dans la péninsule de Kola en Russie et au nord-ouest de la Namibie. Ces complexes sont composés de roches ayant cristallisé à partir de magmas et de fluides très enrichis en alcalins. Cet enrichissement permet la précipitation de minéraux inhabituels riches en potassium et/ou sodium, telles les amphiboles sodiques, également enrichies en fer. Les amphiboles étudiées ont des compositions calciques, sodi-calciques et sodiques, qui reflètent leurs différents environnements de formation. Des études précédentes ont révélé une large gamme de rapports isotopiques de l'hydrogène dans les amphiboles de roches hyperalcalines, dont certains extrêmement bas. Cette variation importante est très intrigante, sachant que des valeurs entre -40 et -800/00 correspondent à des silicates ignés hydratés et non altérés, alors que des valeurs descendant jusqu'a -1500/00 nécessiteraient une altération par de l'eau météorique et/ou une contamination par les roches environnantes ou des sédiments riches en matière organique. Dans lé cas précis du complexe d'Ilímaussaq (sud du Groenland), aucune de ces explications n'a pu être démontrée et des valeurs encore plus faibles ont été trouvées. Le complexe d'Ilímaussaq présente des valeurs de rapport isotopique de l'hydrogène entre -227 et -500/00 dans les amphiboles. Une origine mantellique permet d'expliquer les valeurs élevées, mais d'autres processus doivent entrer en jeu pour engendrer les valeurs les plus négatives. C'est à l'identification de ces processus que nous nous sommes attachés dans ce travail. Les grandes variations observées dans les teneurs en fer et dans le rapport Fe3+/FeT des roches et des minéraux de ces complexes sont corrélées avec d'autres paramètres chimiques, tels que la composition isotopique de l'hydrogène dans les amphiboles. Nous avons dès lors abordé les questions suivantes: quelle est la relation entre la teneur en fer des amphiboles et leur composition isotopique? Que nous apprennent les changements de la teneur en fer et les changements dans le rapport Fe3+/FeT sur les processus pétrologiques dans ces roches? Pour répondre à ces questions, nous avons analysé les compositions isotopiques de l'oxygène et de l'hydrogène dans les amphiboles et d'autres silicates hydratés. La composition chimique et le rapport Fe3+/FeT des amphiboles ont également été déterminés. Des expériences hydrothermales simulant des conditions naturelles ont été entreprises afin de mieux comprendre les processus de fractionnement isotopiques dans ces systèmes très alcalins. Nos conclusions sont les suivantes: (1) Les valeurs extrêmement faibles ainsi que les larges variations des rapports isotopiques de l'hydrogène des amphiboles de ces complexes alcalins sont dues à une combinaison de facteurs tels que la forte alcalinité, la haute teneur en fer et la profondeur très faible de l'intrusion. (2) Ces valeurs sont probablement le résultat de processus magmatiques internes. (3) Il est peu probable que les eaux météoriques et/ou le dégazage magmatique aient joué un rôle lors de la formation de ces amphiboles. (4) Certaines corrélations, en accord avec les études précédentes, ont pu être trouvées au niveau des concentrations en fer. (5) Dans le cas du complexe d'Ilímaussaq exclusivement, une relation a été trouvée entre le rapport Fe3+/FeT et la composition isotopique de l'hydrogène des amphiboles.
Resumo:
The authenticity of vegetable oils consumed in Slovenia and Croatia was investigated by carbon isotope analysis of the individual fatty acids by the use of gas chromatography-combustion-isotope ratio mass spectrometry (GC/C/IRMS), and through carbon isotope analysis of the bulk oil. The fatty acids from samples of olive, pumpkin, sunflower, maize, rape, soybean, and sesame oils were separated by alkaline hydrolysis and derivatized to methyl esters for chemical characterization by capillary gas chromatography/mass spectrometry (GC/MS) prior to isotopic analysis. Enrichment in heavy carbon isotope (C-13) of th, bulk oil and of the individual fatty acids are related to (1) a thermally induced degradation during processing (deodorization, steam washing, or bleaching), (2) hydrolytic rancidity (lipolysis) and oxidative rancidity of the vegetable oils during storage, and (3) the potential blend with refined oil or other vegetable oils. The impurity or admixture of different oils may be assessed from the delta C-13(16:0) VS. delta C-13(18:1) covariations. The fatty acid compositions of Slovenian and Croatian olive oils are compared with those from the most important Mediterranean producer countries (Spain, Italy, Greece, and France).
Resumo:
Pereskia aculeata Mill. (Ora-pro-nóbis) is a native cactaceae from tropical America, whose leaves have high protein content. In Brazil it is found in all territorial extension between the states of Bahia and Rio Grande do Sul. Most studies have focused on chemical characterization of the leaves of this specie. The objective was to assess the carotenoids profile and the total polyphenols present in the fruits of P. aculeate. Carotenoids were determined by HPLC-PAD (high performance liquid chromatography - photodiode array detector), total polyphenols were determined by Folin-Ciocalteu and vanillin methods. Trans-β-carotene was the main carotenoid, followed by α-carotene, lutein and other minor carotenoids. It was found 64.9 ± 1.1 mg.100g-1 of gallic acid equivalent, 14.8 ± 0.2 mg.100g-1 of catechin equivalent. Carotenoid identification of P. aculeate fruits are presented here by the first time and indicate that these fruits can be researched as source of bioactive substances, especially antioxidant and provitamin A carotenoids.