Why Cherry-Picking Never Leads to Harmonisation: The Case of the Limitations on Copyright under Directive 2001/29/EC

The article examines whether the norms laid down in the Directive in relation to the exceptions and limitations on copyright and related rights can be conducive to a sensible degree of harmonisation across the European Union. Before discussing the degree of harmonisation achieved so far by the Directive, the first part gives a short overview of the main characteristics of the list of exceptions and limitations contained in Article 5 of the Directive. A comprehensive review of the implementation of each limitation by the Member States is beyond the scope of this article. The following section takes a closer look at three examples of limitations that have led to legislative changes at the Member State level as express measures towards the implementation of the Information Society Directive, that is, the limitations for the benefit of libraries, for teaching and research, and for persons with a disability. These exceptions and limitations were later on also identified by the European Commission as key elements in the deployment of a digital knowledge economy. The analysis will show that the implementation of the provisions on limitations in the Information Society Directive did not, and probably cannot, yield the expected level of harmonisation across the European Union and that, as a consequence, there still exists a significant degree of uncertainty for the stakeholders regarding the extent of permissible acts with respect to copyright protected works.

Floods of the Upper Danube River and Its Tributaries and Their Impact on Urban Economies (c. 1350–1600): The Examples of the Towns of Krems/Stein and Wels (Austria)

This paper examines the impact of disastrous and ‘ordinary’ floods on human societies in what is now Austria. The focus is on urban areas and their neighbourhoods. Examining institutional sources such as accounts of the bridge masters, charters, statutes and official petitions, it can be shown that city communities were well acquainted with this permanent risk: in fact, an office was established for the restoration of bridges and the maintenance of water defences and large depots for timber and water pipes ensured that the reconstruction of bridges and the system of water supply could start immediately after the floods had subsided. Carpenters and similar groups gained 10 to 20 per cent of their income from the repair of bridges and other flood damage. The construction of houses in endangered zones was adapted in order to survive the worst case experiences. Thus, we may describe those communities living along the central European rivers as ‘cultures of flood management’. This special knowledge vanished, however, from the mid-nineteenth century onwards, when river regulations gave the people a false feeling of security.

International horse movements and spread of equine diseases: Equine Infectious Anaemia and Glanders - two examples

International trade with horses is important and continuously increasing. Therefore the risk of spread of infectious diseases is permanently present. Within this context the worldwide situation of equine vector-borne diseases and of other diseases which are notifiable to the World Organisation of Animal Health (OIE), is described. Furthermore it provides estimates of the numbers of horse movements between these countries, as well as information on import requirements and preventive measures for reducing the risk of disease spread. According to TRACES (Trade Control and Expert System of the European Union) data from 2009 and 2010 81 horses per week were imported from North America into Europe, 42 horses per week from South America, 11 horses per week from the North of Africa and the African horse sichness free-zone of South Africa, 28 per week from the Middle East and the rest of Asia and approximately 4 horses per week from Australia / Oceania. Trade within the European Union resulted amongst others in the introduction of Equine Infectious Anaemia (EIA) from Roma- nia into other European countries. Another example is the suspected case of glanders which occurred after importation of horses from Leb- anon via France and Germany into Switzerland in July 2011.

Extending private-collective innovation: a case study

The private-collective innovation model proposes incentives for individuals and firms to privately invest resources to create public goods innovations. Such innovations are characterized by non-rivalry and non-exclusivity in consumption. Examples include open source software, user-generated media products, drug formulas, and sport equipment designs. There is still limited empirical research on private-collective innovation. We present a case study to (1) provide empirical evidence of a case of private-collective innovation, showing specific benefits, and (2) to extend the private-collective innovation model by analyzing the hidden costs for the company involved. We examine the development of the Nokia Internet Tablet, which builds on both proprietary and open source software development, and that involves both Nokia developers and volunteers who are not employed by the company. Seven benefits for Nokia are identified, as are five hidden costs: difficulty to differentiate, guarding business secrets, reducing community entry barriers, giving up control, and organizational inertia. We examine the actions taken by the management to mitigate these costs throughout the development period.

Planning and implementation efficacy as a determinant of health risk communication outcomes: Case studies of the U.S. Public Health Service (PHS)

This study was conducted under the auspices of the Subcommittee on Risk Communication and Education of the Committee to Coordinate Environmental Health and Related Programs (CCEHRP) to determine how Public Health Service (PHS) agencies are communicating information about health risk, what factors contributed to effective communication efforts, and what specific principles, strategies, and practices best promote more effective health risk communication outcomes.^ Member agencies of the Subcommittee submitted examples of health risk communication activities or decisions they perceived to be effective and some examples of cases they thought had not been as effective as desired. Of the 10 case studies received, 7 were submitted as examples of effective health risk communication, and 3, as examples of less effective communication.^ Information contained in the 10 case studies describing the respective agencies' health risk communication strategies and practices was compared with EPA's Seven Cardinal Rules of Risk Communication, since similar rules were not found in any PHS agency. EPA's rules are: (1) Accept and involve the public as a legitimate partner. (2) Plan carefully and evaluate your efforts. (3) Listen to the public's specific concerns. (4) Be honest, frank, and open. (5) Coordinate and collaborate with other credible sources. (6) Meet the needs of the media. (7) Speak clearly and with compassion.^ On the basis of case studies analysis, the Subcommittee, in their attempts to design and implement effective health risk communication campaigns, identified a number of areas for improvement among the agencies. First, PHS agencies should consider developing a focus specific to health risk communication (i.e., office or specialty resource). Second, create a set of generally accepted practices and guidelines for effective implementation and evaluation of PHS health risk communication activities and products. Third, organize interagency initiatives aimed at increasing awareness and visibility of health risk communication issues and trends within and between PHS agencies.^ PHS agencies identified some specific implementation strategies the CCEHRP might consider pursuing to address the major recommendations. Implementation strategies common to PHS agencies emerged in the following five areas: (1) program development, (2) building partnerships, (3) developing training, (4) expanding information technologies, and (5) conducting research and evaluation. ^

Black economic empowerment in the South African agricultural sector : a case study of the wine industry

This paper explores the extent and forms of black economic empowerment (BEE) in the South African agricultural sector through a case study of the wine industry in the Western Cape. Compared to the mining and fisheries sectors, the progress of BEE in the agricultural sector is still in the early stage. However, various forms of black entry into the wine industry, not limited to BEE deals by large corporations, began to emerge, especially since the enactment of the Broad-based Black Economic Empowerment Act (BBBEE Act), Act 53 of 2003. This paper identifies two types of BEE wineries as unique forms of black entry into the wine industry and investigates in detail their features, backgrounds and challenges by referring to several prominent examples of each type of BEE winery.

Identifying the core competence as a key requirement for business model innovation. The case of Airlines as a service industry

Core competencies form the basis of an organization’s skills and the basic element of a successful strategic execution. Identifying and strengthening the core competencies enhances flexibility thereby strategically positioning a firm for responding to competition in the dynamic marketplace and can be the difference in quality among firms that follow the same business model. A correct understanding of the concept of business models, employing the right core competencies, organizing them effectively and building the business model around the competencies that are constantly gained and assimilated can result in enhanced business performance and thus having implications for firms that want to innovate their business models. Flexibility can be the firm’s agility to shift focus in response to external factors such as changing markets, new technologies or competition and a firm’s success can be gauged by the ability it displays in this transition. Although industry transformations generally emanate from technological changes, recent examples suggests they may also be due to the introduction of new business models and nowhere is it more relevant than in the airline industry. An analysis of the business model flexibility of 17 Airlines from Asia, Europe and Oceania, that is done with core competence as the indicator reveals a picture of inconsistencies in the core competence strategy of certain airlines and the corresponding reduction in business performance. The performance variations are explained from a service oriented core competence strategy employed by airlines that ultimately enables them in having a flexible business model that not only increases business performance but also helps in reducing the uncertainties in the internal and external operating environments. This is more relevant in the case of airline industry, as the product (the air transportation of passengers) minus the service competence is all the same.

Reuse of vacant agro-industrial buildings. The case of the public slaughterhouses in Spain

Nearly 3000 slaughterhouses (74% of them public facilities) were built in Spain during the last decades of the nineteenth century and the first half of the twentieth century. The need to comply with new technical requirements and regulations on the hygiene of the meat passed in the 70s and the gradual replacement of public facilities by larger and more modern private slaughterhouses have subsequently led to the closure and abandonment of many of these buildings. Public slaughterhouses generally consisted of several single-storey and open-plan buildings located around a courtyard. Although originally they were preferably located on the outskirts of the towns, many slaughterhouses are now placed inside the built up areas, due to the urban development. The present work aims to contribute to a better understanding of these agro-industrial buildings and to provide ideas for their conservation and reuse. A review on the historical evolution and the architectural features of the public slaughterhouses in Spain is presented and different examples of old vacant slaughterhouses reused to accommodate libraries, offices, community centres, exhibition halls or sports centres, among others, are shown in the paper.

Integrated studies for the evaluation of conservation treatments on buildings materials from archaeological sites: application to the case of Merida (Spain)

The application of conservation treatments, such as consolidation and protection ones, has been demonstrated ineffective in many cases, and even harmful. Evaluation studies should be a mandatory task, ideally before and after the intervention, but both tasks are complex and unusual in the case of archaeological heritage. This study is mainly focused on analyzing changes in petrophysical properties of stone material from archaeological sites of Merida (Spain), evaluating, both on site and in laboratory, effects derived from different conservation treatments applied in past interventions, throughout the integration of different non-destructive techniques (NDT) and portable devices of analysis available at the Institute of Geosciences (CSIC,UCM). These techniques allow, not only assessment of effectiveness and alteration processes, but also monitoring durability of treatments, focused mainly on 1996 intervention in the case of Roman Theater, as well as different punctual interventions from the 90?s until date in the House of Mitreo. Studies carried out on archaeological sites of Merida permit us to compare outcomes and also check limitations in the use of those equipments. In this paper we discuss about the use of some techniques, their integration and limits, for the assessment of conservation treatments, showing some examples of Merida?s case study.

Surface fitting in geomorphology - examples for regular-shaped volcanic landforms

In nature, several types of landforms have simple shapes: as they evolve they tend to take on an ideal, simple geometric form such as a cone, an ellipsoid or a paraboloid. Volcanic landforms are possibly the best examples of this ?ideal? geometry, since they develop as regular surface features due to the point-like (circular) or fissure-like (linear) manifestation of volcanic activity. In this paper, we present a geomorphometric method of fitting the ?ideal? surface onto the real surface of regular-shaped volcanoes through a number of case studies (Mt. Mayon, Mt. Somma, Mt. Semeru, and Mt. Cameroon). Volcanoes with circular, as well as elliptical, symmetry are addressed. For the best surface fit, we use the minimization library MINUIT which is made freely available by the CERN (European Organization for Nuclear Research). This library enables us to handle all the available surface data (every point of the digital elevation model) in a one-step, half-automated way regardless of the size of the dataset, and to consider simultaneously all the relevant parameters of the selected problem, such as the position of the center of the edifice, apex height, and cone slope, thanks to the highly performing adopted procedure. Fitting the geometric surface, along with calculating the related error, demonstrates the twofold advantage of the method. Firstly, we can determine quantitatively to what extent a given volcanic landform is regular, i.e. how much it follows an expected regular shape. Deviations from the ideal shape due to degradation (e.g. sector collapse and normal erosion) can be used in erosion rate calculations. Secondly, if we have a degraded volcanic landform, whose geometry is not clear, this method of surface fitting reconstructs the original shape with the maximum precision. Obviously, in addition to volcanic landforms, this method is also capable of constraining the shapes of other regular surface features such as aeolian, glacial or periglacial landforms.

Integrated Studies for the Evaluation of Conservation Treatments on Stone Material from Archaeological Sites. Application to the Case of Merida (Spain)

The application of conservation treatments, such as consolidation and protection ones, has been demonstrated ineffective in many cases, and even harmful. Evaluation studies should be a mandatory task, ideally before and after the intervention, but both tasks are complex and unusual in the case of archaeological heritage. This study is mainly focused on analyzing changes in petrophysical properties of stone material from archaeological sites of Merida (Spain), evaluating, both on site and in laboratory, effects derived from different conservation treatments applied in past interventions, throughout the integration of different non-destructive techniques (NDT) and portable devices of analysis available at the Institute of Geosciences (CSIC,UCM). These techniques allow, not only assessment of effectiveness and alteration processes, but also monitoring durability of treatments, focused mainly on 1996 intervention in the case of Roman Theater, as well as different punctual interventions from the 90’s until date in the House of Mitreo. Studies carried out on archaeological sites of Merida permit us to compare outcomes and also check limitations in the use of those equipments. In this paper we discuss about the use of some techniques, their integration and limits, for the assessment of conservation treatments, showing some examples of Merida’s case study.

Promotion of intangible heritage as a tool to strengthen revitalisation of historic centres: the case of de Monumenta Programme in the City of Porto Alegre (Rio Grande do Sul State) Brazil

The preservation of tangible cultural heritage does not guarantee effective revitalisation of urban historic areas as a whole. The legacy of our history consists not only of paintings, sculptures, architectural monuments and public spaces, but also the safeguarding of immaterial aspects of social life, such as oral traditions, rituals, practices, knowledge and craft skills. From 1999 to 2013, 26 Brazilian cities benefited from the Monumenta Programme - a national cultural policy that involved institutions, the private sector and the local community. The purpose of the programme was to stimulate economic growth and increase cultural and social development of the historic centres. Moreover, it sought to increase the number of residents in the benefited areas as defined in its agenda (IDB, 1999; MinC & Programa Monumenta, 2006). Using the Historic Centre of Porto Alegre as a case study, this paper examines how this cultural programme enables demographic change through the promotion of intangible cultural heritage, e.g. by supporting educational projects. The demographic flow was analysed using the microdata of the Populations Censuses (years 2000 and 2010) available from the Brazilian Institute of Geography and Statistics. The results showed an increase in low-income residents the areas that participated in the programme. This increase may have been motivated by a set of cultural-educational projects under the auspices of the Monumenta Programme. The retraining of artisans of Alfândega Square, the training of low-income youth for restoration work and the implementation of the "Black Route Museum in Porto Alegre" (Bicca, 2010) are just some examples of what was done to improve the local community's economy, to encourage social cohesion and to enhance the awareness of cultural diversity as a positive and essential value in society.

Influence of Religious Institutions in the Creation and Implementation of Public Policy: The Case of Roman Catholic Argentina and Secular Uruguay

The strong presence of religious institutions in Latin America, especially the Roman Catholic Church, and their participation in the creation and implementation of public policy within a sovereign state can be counter-productive for the social development and progress of that specific country. Argentina and Uruguay and the social controversy of social issues of abortion and same-sex marriage are used as examples to establish the accuracy of the above statement. Historical, statistical, and legislative information about both topics in both countries show that the political power that the Roman Catholic Church has in the region is more an outdated influence than a reality, and the principle of secularization appears to be the most stabilizing philosophy for modern nations.

Some examples of modeling in chemical engineering: thermal treatment of polymers, phase equilibrium calculations and process design

Presentation submitted to PSE Seminar, Chemical Engineering Department, Center for Advanced Process Design-making (CAPD), Carnegie Mellon University, Pittsburgh (USA), October 2012.