Caracterização limnológica e determinação da capacidade suporte do reservatório mendubim, (Rio Grande do Norte) para o cultivo de peixes em tanques-rede

The aims of this study were: i) assessing the trophic state of the Mendubim reservoir (semi-arid, Rio Grande do Norte, Brazil; 05° 38 99,0 S 36°55 98,0 W) based on chlorophyll-a, total phosphorus and nitrogen concentrations and water transparency; ii) relating the patterns of temporal variation of zooplankton and phytoplankton to the trophic state of the reservoir and iii) investigating the carrying capacity of the reservoir for cage fish farming. The samplingwas done monthly from July 2006 to July 2007 in three stations at the reservoir: next to the dam (barrage), in the central region and in the mouth of the main tributary. The abiotic and biotic variables analyzed were: Secchi depth, volatiles and fixed suspended solids, chlorophyll-a, total phosphorus and nitrogen, TN:TP ratio and mesozooplankton and phytoplankton composition and biomass. The results showed that the reservoir can be considered as mesotrophic with mean concentrations of total nitrogen, phosphorus and chlorophyll-a equal to 1711, 1 μg.L-1, 30,8 μg.L-1 and 5,62 μg.L-1 respectively. The Cyanophyceae class was the most representative in terms of density, with the presence of potentially toxic species such as Microcystis aeruginosa, Planktothrix planctonica, Cylindrospermopsis raciborskii, Aphanizomenon sp. ,Aphanocapsa delicatissima and Pseudanabaena acicularis. Among the zooplankton, the genus Notodiaptomus presented the largest biomass values. Overall, our results show that the light limitation should explain the weak relationship between chlorophyll-a and total phosphorus and nitrogen concentrations. We concluded that the water of Mendubim reservoir is suitable for intensive fish cage aquaculture. Based on the carrying capacity calculations for this reservoir, we found that the maximum sustainable yield of tilapias in cages in the reservoir is 126 ton per year assuming a factor of food conversion of 1.5: 1.0 and a phosphorus content in the fish food of 1%

EVALUATION OF POTENTIAL TRANSLOAD FACILITY LOCATIONS IN THE UPPER PENINSULA (UP) OF MICHIGAN

Shippers want to improve their transportation efficiency and rail transportation has the potential to provide an economical alternative to trucking, but it also has potential drawbacks. The pressure to optimize transportation supply chain logistics has resulted in growing interest in multimodal alternatives, such as a combination of truck and rail transportation, but the comparison of multimodal and modal alternatives can be complicated. Shippers in Michigan’s Upper Peninsula (UP) face similar challenges. Adding to the challenge is the distance from major markets and the absence of available facilities for transloading activities. This study reviewed three potential locations for a transload facility (Nestoria, Ishpeming, and Amasa) where truck shipments could be transferred to rail and vice versa. These locations were evaluated on the basis of transportation costs for shippers when compared to the use of single mode transportation by truck to Wisconsin, Chicago, Minneapolis, and Sault Ste. Marie. In addition to shipping costs, the study also evaluated the potential impact of future carbon emission penalties on the shipping cost and the effects of changing fuel prices on shipping cost. The study used data obtained from TRANSEARCH database (2009) and found that although there were slight differences between percent savings for the three locations, any of them could provide potential benefits for movements to Chicago and Minneapolis, as long as final destination could be accessed by rail for delivery. Short haul movements of less than 200 miles (Wisconsin and Sault Ste. Marie) were not cost effective for multimodal transport. The study also found that for every dollar increase in fuel price, cost savings from multimodal option increased by three to five percent, but the inclusion of emission costs would only add one to two percent additional savings. Under a specific case study that addressed shipments by Northern Hardwoods, the most distant locations in Wisconsin would also provide cost savings, partially due to the possibility of using Michigan trucks with higher carrying capacity for the initial movement from the facility to transload location. In addition, Minneapolis movements were found to provide savings for Northern Hardwoods, even without final rail access.

Trophic food web and ecosystem attributes of a water reservoir of the Ria Formosa (south Portugal)

Using a top-down modelling approach, a balanced trophic food web model of a water reservoir of the Ria Formosa lagoonal system was constructed. Few adjustments of input data were necessary to run the model since most of the parameters were estimated at the study site and the characteristics of the water reservoir allowed a high degree of control and precision in terms of sampling and data collection. Trophic levels of the 14 compartments included in the model varied between 1.0 for primary producers and detritus to 3.4 for carnivorous fish and the 14 groups were aggregated in a food chain with six trophic levels. The water reservoir has a detritus based food chain, with the majority of the biomass concentrated in the first two levels, the producers level and the herbivore/detritivore level (97.6%). The transfer efficiencies were low, and decreased with increasing level number, varying between 6.0 and 0.2%. The degree of "ecosystem maturity" was difficult to establish, but several parameters indicate that it could be high. The water reservoir studied, which has similar environmental and ecological characteristics as the Ria Formosa lagoon. is near its carrying capacity. (C) 2004, Elsevier B.V. All rights reserved.

Assessing mackerel scad, Decapterus macarellus, in Cape Verde: using a Bayesian approach to biomass dynamic modelling in a data-limited situation

The fisheries for mackerel scad, Decapterus macarellus, are particularly important in Cape Verde, constituting almost 40% of total catches at the peak of the fishery in 1997 and 1998 ( 3700 tonnes). Catches have been stable at a much lower level of about 2 100 tonnes in recent years. Given the importance of mackerel scad in terms of catch weight and local food security, there is an urgent need for updated assessment. Stock assessment was carried out using a Bayesian approach to biomass dynamic modelling. In order to tackle the problem of a non-informative CPUE series, the intrinsic rate of increase, r, was estimated separately, and the ratio B-0/X, initial biomass relative to carrying capacity, was assumed based on available information. The results indicated that the current level of fishing is sustainable. The probability of collapse is low, particularly in the short-term, and it is likely that biomass may increase further above B-msy, indicating a healthy stock level. It would appear that it is relatively safe to increase catches even up to 4000 tonnes. However, the marginal posterior of r was almost identical to the prior, indicating that there is relatively low information content in CPUE. This was also the case in relation to B-0/X There have been substantial increases in fishing efficiency, which have not been adequately captured by the measure used for effort (days or trips), implying that the results may be overly optimistic and should be considered preliminary. (c) 2006 Elsevier B.V. All rights reserved.

Assessment of environment, land management, and spatial variables on recent changes in montado land cover in southern Portugal

Montado decline has been reported since the end of the nineteenth century in southern Portugal and increased markedly during the 1980s. Consensual reports in the literature suggest that this decline is due to a number of factors, such as environmental constraints, forest diseases, inappropriate management, and socioeconomic issues. An assessment on the pattern of montado distribution was conducted to reveal how the extent of land management, environmental variables, and spatial factors contributed to montado area loss in southern Portugal from 1990 to 2006. A total of 14 independent variables, presumably related to montado loss, were grouped into three sets: environmental variables, land management variables, and spatial variables. From 1990 to 2006, approximately 90,054 ha disappeared in the montado area, with an estimated annual regression rate of 0.14 % year-1. Variation partitioning showed that the land management model accounted for the highest percentage of explained variance (51.8 %), followed by spatial factors (44.6 %) and environmental factors (35.5 %). These results indicate that most variance in the large-scale distribution of recent montado loss is due to land management, either alone or in combination with environmental and spatial factors. The full GAM model showed that different livestock grazing is one of the most important variables affecting montado loss. This suggests that optimum carrying capacity should decrease to 0.18–0.60 LU ha-1 for livestock grazing in montado under current ecological conditions in southern Portugal.

Debonding and crack propagation in cracked steel beams strengthened with CFRP and subjected to cyclic loads.

The reinforcement methods used to restore or increase the bearing capacity of metal structures are based on the application of steel plates to be bolted or welded to the original structure, which can cause problems to the integrity of the original structure. These difficulties can be overcome with the introduction of fiber-reinforced composite materials. FRPs are characterized by high strength to weight ratio, and they are very resistant to corrosion. In this dissertation a cracked steel I-beam reinforced with Carbon Fiber-Reinforced Polymer will be studied by performing a numerical evaluation of the structure with the commercial Finite Element Method software ABAQUS. The crack propagation will be computed using XFEM, while the debonding of the reinforcement layer will be found by considering a cohesive contact interface between the beam and the CFRP plate. The results will show the efficiency of the strengthening method in increasing the load carrying capacity of the cracked beam, and in reducing the crack opening of the initial notch.

Influence of angiotensinogen and angiotensin-converting enzyme polymorphisms on cardiac hypertrophy and improvement on maximal aerobic capacity caused by exercise training

Background The allele threonine (T) of the angiotensinogen has been associated with ventricular hypertrophy in hypertensive patients and soccer players. However, the long-term effect of physical exercise in healthy athletes carrying the T allele remains unknown. We investigated the influence of methionine M or T allele of the angiotensinogen and D or I allele of the angiotensin-converting enzyme on left-ventricular mass index (LVMI) and maximal aerobic capacity in young healthy individuals after long-term physical exercise training. Design Prospective clinical trial. Methods Eighty-three policemen aged between 20 and 35 years (mean +/- SD 26 +/- 4.5 years) were genotyped for the M235T gene angiotensinogen polymorphism (TT, n=25; MM/MT, n=58) and angiotensin-converting enzyme gene insertion/deletion (I/D) polymorphism (11, n=18; DD/DI, n=65). Left-ventricular morphology was evaluated by echocardiography and maximal aerobic capacity (VO(2peak)) by cardiopulmonary exercise test before and after 17 weeks of exercise training (50-80% VO(2peak)). Results Baseline VO(2peak) and LVMI were similar between TT and MM/MT groups, and II and DD/DI groups. Exercise training increased significantly and similarly VO(2peak) in homozygous TT and MM/MT individuals, and homozygous II and DD/DI individuals. In addition, exercise training increased significantly LVMI in TT and MM/MT individuals (76.5 +/- 3 vs. 86.7 +/- 4, P=0.00001 and 76.2 +/- 2 vs. 81.4 +/- 2, P=0.00001, respectively), and II and DD/DI individuals (777 +/- 4 vs. 81.5 +/- 4, P=0.0001 and 76 +/- 2 vs. 83.5 +/- 2, P=0.0001, respectively). However, LVMI I in TT individuals was significantly greater than in MM/MT individuals (P=0.04). LVMI was not different between 11 and DD/DI individuals. Conclusion Left-ventricular hypertrophy caused by exercise training is exacerbated in homozygous TT individuals with angiotensinogen polymorphism. Eur J Cardiovasc Prev Rehabil 16:487-492 (C) 2009 The European Society of Cardiology

HLA-Bw4 identifies a population of HIV-infected patients with an increased capacity to control viral replication after structured treatment interruption.

OBJECTIVES: After structured treatment interruption (STI) of treatment for HIV-1, a fraction of patients maintain suppressed viral loads. Prospective identification of such patients might improve HIV-1 treatment, if selected patients are offered STI. METHODS: We analysed the effect of previously identified genetic modulators of HIV-1 disease progression on patients' ability to suppress viral replication after STI. Polymorphisms in the genes killer cell immunoglobulin-like receptor 3DLI (KIR3DL1)/KIR3DS1, human leucocyte antigen B (HLA-B) and HLA Complex P5 (HCP5), and a polymorphism affecting HLA-C surface expression were analysed in 130 Swiss HIV Cohort Study patients undergoing STI. Genotypes were correlated with viral load levels after STI. RESULTS: We observed a statistically significant reduction in viral load after STI in carriers of HLA-B alleles containing either the Bw480Thr or the Bw480Ile epitope (mean adjusted effect on post-STI viral load: -0.82 log HIV-1 RNA copies/ml, P < 0.001; and -1.12 log copies/ml, P < 0.001, respectively). No significant effects were detected for the other polymorphisms analysed. The likelihood of being able to control HIV-1 replication using a prespecified cut-off (viral load increase < 1000 copies/ml) increased from 39% in Bw4-negative patients to 53% in patients carrying Bw4-80Thr, and to 65% in patients carrying Bw4-80Ile (P = 0.02). CONCLUSIONS: These data establish a significant impact of HLA-Bw4 on the control of viral replication after STI.

An easy functional capacity evaluation in chronic low back pain

Lifting is said to be on of the major risk factors for the onset of low back pain, several different measures has been developed to study this. Several programs are available in order to measure these components, or to determine the ability of an individual to perform a certain job or to discover if the job creates dangerous positions for the worker. In these different fields reliable and valid instruments exist but they are costly and time spending. We present a simplified functional capacity measuring that we use daily in practise. Method: 280 patients have been evaluated on this base. The majority was referred to multidisciplinary rehabilitation treatment. The patients had recurrent back problems for months or years. Inclusion criteria were between 18 and 64 years, currently of work, no work compensation. Exclusion criteria were chronic low back pain with a specific cause. They followed a one-hour evaluation test as a functional capacity evaluation at the end of the multidisciplinary treatment period, it was compared to the PILE-test done at the beginning and at the end. Results: We included 280 subjects: 160 men and 120 women. Mean age 43.6 by the women and 44 years by the men. We studied the caring foot-hip, hip-shoulder, 5 m carrying, pushing and tiring and the global weight carried during the test. We found this global value to be 696 kg by men and 422 kg by women suffering from chronic lumbar pain. The increase in this value had a clear incidence on a greater work ability, as had a decrease. Conclusions: We were able to develop a lifting capacity program that is easy to reproduce and not expensive, giving us the possibility to have an idea on how to reorient the patients according to their work place and their capacities. We could also have an information of work performance and power consumption. It should be more tested and compared to standard capacity in the healthy population.

Novel Robot Solutions for Carrying out Field Joint Welding and Machining in the Assembly of the Vacuum Vessel of ITER

It is necessary to use highly specialized robots in ITER (International Thermonuclear Experimental Reactor) both in the manufacturing and maintenance of the reactor due to a demanding environment. The sectors of the ITER vacuum vessel (VV) require more stringent tolerances than normally expected for the size of the structure involved. VV consists of nine sectors that are to be welded together. The vacuum vessel has a toroidal chamber structure. The task of the designed robot is to carry the welding apparatus along a path with a stringent tolerance during the assembly operation. In addition to the initial vacuum vessel assembly, after a limited running period, sectors need to be replaced for repair. Mechanisms with closed-loop kinematic chains are used in the design of robots in this work. One version is a purely parallel manipulator and another is a hybrid manipulator where the parallel and serial structures are combined. Traditional industrial robots that generally have the links actuated in series are inherently not very rigid and have poor dynamic performance in high speed and high dynamic loading conditions. Compared with open chain manipulators, parallel manipulators have high stiffness, high accuracy and a high force/torque capacity in a reduced workspace. Parallel manipulators have a mechanical architecture where all of the links are connected to the base and to the end-effector of the robot. The purpose of this thesis is to develop special parallel robots for the assembly, machining and repairing of the VV of the ITER. The process of the assembly and machining of the vacuum vessel needs a special robot. By studying the structure of the vacuum vessel, two novel parallel robots were designed and built; they have six and ten degrees of freedom driven by hydraulic cylinders and electrical servo motors. Kinematic models for the proposed robots were defined and two prototypes built. Experiments for machine cutting and laser welding with the 6-DOF robot were carried out. It was demonstrated that the parallel robots are capable of holding all necessary machining tools and welding end-effectors in all positions accurately and stably inside the vacuum vessel sector. The kinematic models appeared to be complex especially in the case of the 10-DOF robot because of its redundant structure. Multibody dynamics simulations were carried out, ensuring sufficient stiffness during the robot motion. The entire design and testing processes of the robots appeared to be complex tasks due to the high specialization of the manufacturing technology needed in the ITER reactor, while the results demonstrate the applicability of the proposed solutions quite well. The results offer not only devices but also a methodology for the assembly and repair of ITER by means of parallel robots.

Spinal muscular atrophy: SMN2 pre-mRNA splicing corrected by a U7 snRNA derivative carrying a splicing enhancer sequence

Spinal muscular atrophy (SMA) is a lethal hereditary disease caused by homozygous deletion/inactivation of the survival of motoneuron 1 (SMN1) gene. The nearby SMN2 gene, despite its identical coding capacity, is only an incomplete substitute, because a single nucleotide difference impairs the inclusion of its seventh exon in the messenger RNA (mRNA). This splicing defect can be corrected (transiently) by specially designed oligonucleotides. Here we have developed a more permanent correction strategy based on bifunctional U7 small nuclear RNAs (snRNAs). These carry both an antisense sequence that allows specific binding to exon 7 and a splicing enhancer sequence that will improve the recognition of the targeted exon. When expression cassettes for these RNAs are stably introduced into cells, the U7 snRNAs become incorporated into small nuclear ribonucleoprotein (snRNP) particles that will induce a durable splicing correction. We have optimized this strategy to the point that virtually all SMN2 pre-mRNA becomes correctly spliced. In fibroblasts from an SMA patient, this approach induces a prolonged restoration of SMN protein and ensures its correct localization to discrete nuclear foci (gems).

Importance of sperm transition proteins demonstrated in mice carrying Tnp1- and Tnp2-null alleles

Chromatin condensation within the nucleus of developing spermatids involves replacement of histones by transition proteins, which are in turn replaced by protamines. The importance of transition proteins in the complex process of spermiogenesis has, to date, been only speculative. This study sought to investigate the extent to which transition proteins are essential or have redundant functions by characterizing sperm produced in mice expressing all combinations of Tnp-null alleles. Results from breeding trials of 8 weeks duration revealed that, on average, wildtype males produced about 14 offspring whereas TP2 and TP1 single-knockout males produced about 8 and 1 offspring, respectively, demonstrating their subfertility. Genotypes with less than two Tnp wildtype alleles, as well as double-knockout mutants, were completely infertile. Sperm from males with impaired fertility had poor progressive motility, heterogeneous chromatin condensation, incompletely processed protamine 2 and head and tail abnormalities. Generally, as the number of Tnp-null alleles increased so did the severity of abnormalities. However, specific morphological abnormalities were associated with the absence of an individual TP. Studies which sought to identify possible root causes for abnormalities in thiol-rich sperm structures revealed no differences in thiol content or sulfhydryl oxidation status within the nucleus but nuclei and tails from single-knockout mutants were severely disrupted following thiol reduction. Binding of fluorescent dyes to DNA was normal in sperm recovered from caput but abnormal in cauda epididymal sperm from TP1 knockouts and infertile double mutants. Injection of cauda epididymal sperm from double knockouts into oocytes produced very few offspring; however, after injection with testicular sperm, the efficiency was no different from wildtype. These results suggest DNA structural alterations or degradation during epididymal transport of sperm resulting in a diminished capacity of the paternal DNA of these sperm to produce offspring. The overall importance of transition proteins for normal chromatin condensation and production of fertile sperm has been demonstrated. Furthermore, identification of specific morphological abnormalities associated with the absence of an individual transition protein provides new evidence that the proteins are not completely redundant and each fulfills some unique function. ^

Development in Rural Areas Through Capacity Building and Education for Business

This paper is based on a case study located in Avila, central Spain. Its main objectives are to implement an entrepreneurship program and design a plan of capacity building and education for business in order to promote the development of rural areas. The methodological approach of the program is based on the use of tools that permit involving the various actors of the area from the early planning stages. The university's group that is carrying out the field work has relied on these participatory tools in very different areas and contexts for over 25 years. This has allowed the development of an advanced planning model called ?Working With People? that connects expert and experience knowledge in the territories where it is applied. With this methodological approach, the diagnosis of the territory and the design of the program's strategy has been carried out. Once completed the first phase of the program and in order to ensure the sustainability and applicability of future entrepreneurial initiatives, it is necessary to support and strengthen potential entrepreneurs through training activities and capacity building. It relies on ?How to learn from people who live there? to promote investment projects and to teach them with adequate educational skills. In this context, this article aims to study the implementation strategy of these training and capacity building activities studied from an academic perspective, as well as analyzing the potential effects of these actions in promoting entrepreneurship in the territories

Item validity of the physical demands from the Dictionary of Occupational Titles for the functional capacity evaluation of clients with chronic back pain

This study assessed the item validity of 15 of the physical demands from the Dictionary of Occupational Titles (DOT), as evaluated in a new approach to functional capacity evaluation (FCE) for clients with chronic back pain, the Gibson Approach to FCE (GAPP FCE). Fifty-two occupational therapists were sent the specifications of the items in the GAPP FCE procedures and were asked to rate the items in terms of item-objective congruence, relevance and difficulty. A response rate of 59.2% was obtained. The majority of the therapists agreed that most of the items were congruent with the objectives based on the definition of the physical demands from the DOT. The items evaluating Balancing and Pushing and Pulling had the lowest item-objective congruence. The evaluation of Balancing and the Lifting, Carrying and Pushing and Pulling of loads greater than light-medium weight (10–16 kg) were not considered significantly relevant. Concerns were raised about the difficulty and safety of the evaluation of Lifting, Carrying and Pushing and Pulling with clients with chronic back pain, particularly if the therapist evaluates the manual handling of medium to heavy loads. These results may have implications for other FCEs, particularly those which are based on the DOT, or when assessing clients with chronic back pain.

Targeting and treatment of glioblastomas with human mesenchymal stem cells carrying ferrociphenol lipid nanocapsules

International audience