Ultracam - An Ultra-Fast Triple-Beam CCD Camera

ULTRACAM is a high-speed three-colour CCD camera designed to provide imaging photometry at high temporal resolutions. The instrument is highly portable and will be used at a number of large telescopes around the world. ULTRACAM was successfully commissioned on the 4.2-m William Herschel Telescope on La Palma on 16 May 2002 over 3 months ahead of schedule and within budget. The instrument was funded by PPARC and designed and built by a consortium involving the Universities of Sheffield Southampton and the UKATC Edinburgh. We present an overview of the design and performance characteristics of ULTRACAM and highlight some of its most recent scientific results.

Optimizing geometric accuracy of four dimensional CT scans acquired using the wall and couch mounted Varian Real-Time Position Management camera systems

Objective:

The aim of this study was to identify sources of anatomical misrepresentation due to the location of camera mounting, tumour motion velocity and image processing artefacts in order to optimise the 4DCT scan protocol and improve geometrical-temporal accuracy.

A phantom with an imaging insert was driven with a sinusoidal superior-inferior motion of varying amplitude and period for 4DCT scanning. The length of a high density cube within the insert was measured using treatment planning software to determine the accuracy of its spatial representation. Scan parameters were varied including the tube rotation period and the cine time between reconstructed images. A CT image quality phantom was used to measure various image quality signatures under the scan parameters tested.

No significant difference in spatial accuracy was found for 4DCT scans carried out using the wall mounted or couch mounted camera for sinusoidal target motion. Greater spatial accuracy was found for 4DCT scans carried out using a tube rotation speed of 0.5s rather than 1.0s. The reduction in image quality when using a faster rotation speed was not enough to require an increase in patient dose.

4DCT accuracy may be increased by optimising scan parameters, including choosing faster tube rotation speeds. Peak misidentification in the recorded breathing trace leads to spatial artefacts and this risk can be reduced by using a couch mounted infrared camera.

This study explicitly shows that 4DCT scan accuracy is improved by scanning with a faster CT tube rotation speed.

ROSA: A High-cadence, Synchronized Multi-camera Solar Imaging System

The Rapid Oscillations in the Solar Atmosphere (ROSA) instrument is a synchronized, six-camera high-cadence solar imaging instrument developed by Queen's University Belfast and recently commissioned at the Dunn Solar Telescope at the National Solar Observatory in Sunspot, New Mexico, USA, as a common-user instrument. Consisting of six 1k x 1k Peltier-cooled frame-transfer CCD cameras with very low noise (0.02 - 15 e/pixel/s), each ROSA camera is capable of full-chip readout speeds in excess of 30 Hz, and up to 200 Hz when the CCD is windowed. ROSA will allow for multi-wavelength studies of the solar atmosphere at a high temporal resolution. We will present the current instrument set-up and parameters, observing modes, and future plans, including a new high QE camera allowing 15 Hz for Halpha. Interested parties should see https://habu.pst.qub.ac.uk/groups/arcresearch/wiki/de502/ROSA.html

An invasive-native mammalian species replacement process captured by camera trap survey random encounter models

Camera traps are used to estimate densities or abundances using capture-recapture and, more recently, random encounter models (REMs). We deploy REMs to describe an invasive-native species replacement process, and to demonstrate their wider application beyond abundance estimation. The Irish hare Lepus timidus hibernicus is a high priority endemic of conservation concern. It is threatened by an expanding population of non-native, European hares L. europaeus, an invasive species of global importance. Camera traps were deployed in thirteen 1 km squares, wherein the ratio of invader to native densities were corroborated by night-driven line transect distance sampling throughout the study area of 1652 km2. Spatial patterns of invasive and native densities between the invader’s core and peripheral ranges, and native allopatry, were comparable between methods. Native densities in the peripheral range were comparable to those in native allopatry using REM, or marginally depressed using Distance Sampling. Numbers of the invader were substantially higher than the native in the core range, irrespective of method, with a 5:1 invader-to-native ratio indicating species replacement. We also describe a post hoc optimization protocol for REM which will inform subsequent (re-)surveys, allowing survey effort (camera hours) to be reduced by up to 57% without compromising the width of confidence intervals associated with density estimates. This approach will form the basis of a more cost-effective means of surveillance and monitoring for both the endemic and invasive species. The European hare undoubtedly represents a significant threat to the endemic Irish hare.

A frontal view gait recognition based on 3D imaging using a time of flight camera

Studies have been carried out to recognize individuals from a frontal view using their gait patterns. In previous work, gait sequences were captured using either single or stereo RGB camera systems or the Kinect 1.0 camera system. In this research, we used a new frontal view gait recognition method using a laser based Time of Flight (ToF) camera. In addition to the new gait data set, other contributions include enhancement of the silhouette segmentation, gait cycle estimation and gait image representations. We propose four new gait image representations namely Gait Depth Energy Image (GDE), Partial GDE (PGDE), Discrete Cosine Transform GDE (DGDE) and Partial DGDE (PDGDE). The experimental results show that all the proposed gait image representations produce better accuracy than the previous methods. In addition, we have also developed Fusion GDEs (FGDEs) which achieve better overall accuracy and outperform the previous methods.

Argonauta Video Database: General simulated scenes. Scene 1 (Right camera)

General simulated scenes These scenes followed a pre-defined script (see the Thesis for details), with common movements corresponding to general experiments. People go to or stand still in front of "J9", and/or go to the side of Argonauta reactor and come back again. The first type of movement is common during Irradiation experiments, where a material sample is put within the "J9" channel; and also during neutrongraphy or gammagraphy experiments, where a sample is placed in front of "J9". Here, the detailed movements of putting samples on these places were not reproduced in details, but only the whole bodies' movements were simulated (as crouching or being still in front of "J9"). The second type of movement may occur when operators go to the side of Argonauta to verify some operational condition. - Scene 1 (Obs.: Scene 1 of the "General simulated scenes" class): Comprises one of the scenes with two persons. Both of them use clothes of light colors. Both persons remain still in front of "J9"; one goes to the computer and then come back, and both go out. Video file labels: "20140326145315_IPCAM": recorded by the right camera,

Argonauta Video Database: General Simulated. Scene 1 (Left Camera)

General simulated scenes These scenes followed a pre-defined script (see the Thesis for details), with common movements corresponding to general experiments. People go to or stand still in front of "J9", and/or go to the side of Argonauta reactor and come back again. The first type of movement is common during Irradiation experiments, where a material sample is put within the "J9" channel; and also during neutrongraphy or gammagraphy experiments, where a sample is placed in front of "J9". Here, the detailed movements of putting samples on these places were not reproduced in details, but only the whole bodies' movements were simulated (as crouching or being still in front of "J9"). The second type of movement may occur when operators go to the side of Argonauta to verify some operational condition. - Scene 1 (Obs.: Scene 1 of the "General simulated scenes" class): Comprises one of the scenes with two persons. Both of them use clothes of light colors. Both persons remain still in front of "J9"; one goes to the computer and then come back, and both go out. Video file labels: "20140326145316_IPCAM": recorded by the left camera.

Argonauta Video Database: General simulated. Scene 2 (Right camera)

General simulated scenes These scenes followed a pre-defined script (see the Thesis for details), with common movements corresponding to general experiments. People go to or stand still in front of "J9", and/or go to the side of Argonauta reactor and come back again. The first type of movement is common during Irradiation experiments, where a material sample is put within the "J9" channel; and also during neutrongraphy or gammagraphy experiments, where a sample is placed in front of "J9". Here, the detailed movements of putting samples on these places were not reproduced in details, but only the whole bodies' movements were simulated (as crouching or being still in front of "J9"). The second type of movement may occur when operators go to the side of Argonauta to verify some operational condition. - Scene 2: Comprises one of the scenes with two persons. Both of them use clothes of dark colors. Both persons go to the side of Argonauta reactor and then come back and go out. Video file labels: "20140326154754_IPCAM": recorded by the right camera.

Argonauta Video Database: Spectography experiment. Scene 1 (Left camera)

Scenes for Spectrography experiment Scenes were recorded following the tasks involved in spectrography experiments, which are carried out in front of "J9" output radiadion channel, the latter in open condition. These tasks may be executed by one or two persons. One person can do the tasks, but requiring him to crouch in front of "J9" to adjust the angular position the experimental appartus (a crystal to bend the neutron radiation to the spectograph), and then to get up to verify data in a computer aside; these movements are repeated until achieving the right operational conditions. Two people may aid one another in such a way one remais crouched while the other remains still in front of the computer. They may also interchange tasks so as to divide received doses. Up to now, there are available two scenes with one person and one scene with two persons. These scenes are described in the sequel: - Scene 1: Comprises one of the scenes with one person performing spectography experiment. Video file labels:"20140327181336_IPCAM": recorded by the left camera.

Argonauta Video Database: Spectography experiment. Scene 2 (Right camera)

Scenes for Spectrography experiment Scenes were recorded following the tasks involved in spectrography experiments, which are carried out in front of "J9" output radiadion channel, the latter in open condition. These tasks may be executed by one or two persons. One person can do the tasks, but requiring him to crouch in front of "J9" to adjust the angular position the experimental appartus (a crystal to bend the neutron radiation to the spectograph), and then to get up to verify data in a computer aside; these movements are repeated until achieving the right operational conditions. Two people may aid one another in such a way one remais crouched while the other remains still in front of the computer. They may also interchange tasks so as to divide received doses. Up to now, there are available two scenes with one person and one scene with two persons. These scenes are described in the sequel: - Scene 2: Another take similat to Scene 1. Video file labels: "20140327180749_IPCAM": recorded by the right camera.

Argonauta Video Database: Spectography experiment. Scene 2 (Left camera)

Scenes for Spectrography experiment Scenes were recorded following the tasks involved in spectrography experiments, which are carried out in front of "J9" output radiadion channel, the latter in open condition. These tasks may be executed by one or two persons. One person can do the tasks, but requiring him to crouch in front of "J9" to adjust the angular position the experimental appartus (a crystal to bend the neutron radiation to the spectograph), and then to get up to verify data in a computer aside; these movements are repeated until achieving the right operational conditions. Two people may aid one another in such a way one remais crouched while the other remains still in front of the computer. They may also interchange tasks so as to divide received doses. Up to now, there are available two scenes with one person and one scene with two persons. These scenes are described in the sequel: - Scene 2: Another take similat to Scene 1. Video file labels: "20140327180750_IPCAM": recorded by the left camera.