Desenvolvimento de uma rotina em Excel para Cálculo de Perdas de Pré-Esforço de acordo com EC2

O presente trabalho teve como objetivo o desenvolvimento de uma folha de cálculo em MS-Excel para cálculo de perdas de pré-esforço, utilizando rotinas programadas em Visual Basic. Neste relatório, após o capítulo introdutório onde são descritos os conceitos teóricos que sustentam o trabalho, descreve-se a aplicação desenvolvida e apresentam-se alguns exemplos de validação da mesma. A aplicação executa o cálculo das perdas de pré-esforço por pós-tensão e calcula a geometria do cabo, disponibilizando no final a representação gráfica das perdas para o cabo em estudo. Para além dos exemplos de validação referidos, são ainda apresentados os resultados obtidos por aplicação da folha de cálculo desenvolvida a uma situação real de projeto que surgiu durante a realização do estágio. A parte final do relatório é dedicada à apresentação das conclusões assim como a algumas sugestões para desenvolvimentos futuros.

Estudo de problemas de corrosão em cabos de aço zincado

As cablagens metálicas são aplicadas abundantemente na montagem dos automóveis, para accionamento de diversos dispositivos, tais como a abertura de portas, abertura da mala ou da tampa do motor, abertura do tampão do depósito de combustível, accionamento do travão de mão, etc. Nas cablagens metálicas utilizadas na indústria automóvel é comummente utilizado arame entrançado de aço zincado, o qual foi já estudado resistir à agressividade das condições em que habitualmente trabalham. No entanto, para que esta estabilidade de funcionamento exista, torna-se necessário que a qualidade do arame entrançado seja a mais adequada. O presente trabalho surgiu da necessidade de averiguar quais as razões que estariam por detrás do aparecimento de quantidades relativamente abundantes de Óxido de Zinco (ZnO) em cablagens metálicas utilizadas na indústria automóvel, poucas semanas depois do seu fabrico. O estudo foi levado a cabo com vista a satisfazer as necessidades de investigação deste problema por parte de uma empresa de cablagens metálicas instalada no nosso país, a FicoCables, estabelecendo quais as causas-raiz deste problema, com vista a poder evitálo no futuro. O trabalho foi concluído com sucesso, tendo-se averiguado que existiam lacunas graves de limpeza do cabo entre as operações de conformação do arame e de zincagem, com deposição de elementos potenciadores do Óxido de Zinco na interface, os quais viriam a revelar-se cruciais à posteriori, para a nucleação e desenvolvimento do Óxido de Zinco na superfície do cabo.

Kitchen robot prod. line development. Proj. of Bowden cables cutting and thermal forming machine.

This document presents particular description of work done during student’s internship in PR Metal company realized as ERASMUS PROJECT at ISEP. All information including company’s description and its structure, overview of the problems and analyzed cases, all stages of projects from concept to conclusion can be found here. Description of work done during the internship is divided here into two pieces. First part concerns one activities of the company which is robotic chefs (kitchen robot) production line. Work, that was done for development of this line involved several tasks, among them: creating a single-worker montage station for screwing robots housing’s parts, improve security system for laser welding chamber, what particularly consists in designing automatically closing door system with special surface, that protects against destructive action of laser beam, test station for examination of durability of heating connectors, solving problem with rotors vibrations. Second part tells about main task, realized in second half of internship and stands a complete description of machine development and design. The machine is a part of car handle latch cable production line and its tasks are: cutting cable to required length and hot-forming plastic cover for further assembly needs.

EDP InovCity: Electricity feedback with smart meters through tv

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Design of future distribution grids

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Vodafone - Kabel Deutschland Merger

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Wound Healing: a genetic approach in Drosophila

The wound healing response is an essential mechanism to maintain the integrity of epithelia and protect all organisms from the surrounding milieu. In the “purse-string” mechanism of wound closure, an injured epithelial sheet cinches its hole closed via an intercellular contractile actomyosin cable.(...)

Contratos de prestação de serviços de comunicações electrónicas

The object of this dissertation is the analysis of the legal framework applicable to contracts for provision of electronic communications services, while trying to offer solutions to some of the issues regarding this matter. The main focus of this study will be the rules concerning service’s suspension, which have been recently amended. The technological development and the establishment of these services as information transmitters and work tools were noteworthy for its growing importance at the present time. These services include cable television, telephone (landline and mobile) and internet and they are regulated by Law nr 23/96, July 26th, along with other essential public services. Said law sets a group of principles and duties, such as good faith (article 3), continuity and quality of the service (article 7) and the duty to rightfully inform the user (article 4), in order to protect the users. For the analysis of legal framework applicable to these particular contracts it is also fundamental to mention Law nr 5/2004, February 10th, known as Electronic Communications Law. The provisions regarding the service’s suspension are currently prescribed in articles 52.º and 52.º-A of the law. Given the amendments introduced by Law nr 10/2013, January 28th, consumers are subjected to a regulation different from the one applicable to the other users, established in the new article 52.º-A. From our analysis, we have concluded that the main change from past provisions has to do with the automatic termination of the contract as consequence of the consumer’s failure to pay the price or to conclude a written payment arrangement after service’s suspension.

Study of Helium II heat transport phenomena in superconducting rutherford type cables

This thesis is a study of how heat is transported in non-steady-state conditions from a superconducting Rutherford cable to a bath of superfluid helium (He II). The same type of superconducting cable is used in the dipole magnets of the Large Hadron Collider (LHC). The dipole magnets of the LHC are immersed in a bath of He II at 1.9 K. At this temperature helium has an extremely high thermal conductivity. During operation, heat needs to be efficiently extracted from the dipole magnets to keep their superconducting state. The thermal stability of the magnets is crucial for the operation of the LHC, therefore it is necessary to understand how heat is transported from the superconducting cables to the He II bath. In He II the heat transfer can be described by the Landau regime or by the Gorter-Mellink regime, depending on the heat flux. In this thesis both measurements and numerical simulation have been performed to study the heat transfer in the two regimes. A temperature increase of 8 2 mK of the superconducting cables was successfully measured experimentally. A new numerical model that covers the two heat transfer regimes has been developed. The numerical model has been validated by comparison with existing experimental data. A comparison is made between the measurements and the numerical results obtained with the developed model.

EDP inovcity: Electricity feedback with smart meters through TV

In this work project I propose an innovative service – Electricity Feedback with Smart Meters through TV – to be considered as an additional test in the residential electricity use feedback trials currently being conducted in EDP’s InovCity project. My proposal is based on relevant past and current research studies, both Portuguese and international, which explain and support the proposed operationalization and characteristics of this new service. Furthermore, a careful analysis about the segmentation framing, the best market entry strategy and the consequences of adopting a joint venture with cable TV operators, is also provided. Finally, I present a SWOT analysis and highlight critical issues affecting the effectiveness of feedback which require further research.

Contratos de prestação de serviços de comunicações electrónicas

The object of this dissertation is the analysis of the legal framework applicable to contracts for provision of electronic communications services, while trying to offer solutions to some of the issues regarding this matter. The main focus of this study will be the rules concerning service’s suspension, which have been recently amended. The technological development and the establishment of these services as information transmitters and work tools were noteworthy for its growing importance at the present time. These services include cable television, telephone (landline and mobile) and internet and they are regulated by Law nr 23/96, July 26th, along with other essential public services. Said law sets a group of principles and duties, such as good faith (article 3), continuity and quality of the service (article 7) and the duty to rightfully inform the user (article 4), in order to protect the users. For the analysis of legal framework applicable to these particular contracts it is also fundamental to mention Law nr 5/2004, February 10th, known as Electronic Communications Law. The provisions regarding the service’s suspension are currently prescribed in articles 52.º and 52.º-A of the law. Given the amendments introduced by Law nr 10/2013, January 28th, consumers are subjected to a regulation different from the one applicable to the other users, established in the new article 52.º-A. From our analysis, we have concluded that the main change from past provisions has to do with the automatic termination of the contract as consequence of the consumer’s failure to pay the price or to conclude a written payment arrangement after service’s suspension.

PT Multimedia

The purpose of the present case – and accompanying Teaching Notes – is to better understand the spin-off of PT Multimédia, by Portugal Telecom, after receiving a Public Takeover Offer from Sonaecom, in 2006. The Government and the Competition Authority had never looked in a serious way at PT’s dominant position and the lack of room for competition in the TMT sector – PT was the owner of both the cable and copper networks, having access to privileged information from its competitors with control over the wholesale and retail businesses. In 2006, the company received a takeover offer from Sonaecom, the TMT subsidiary from the Portuguese conglomerate Sonae. The offer was voted and rejected by a majority of PT shareholders, but the whole process triggered several recommendations from the regulatory bodies. As a result, PT divested its cable business with the spin-off of PT Multimédia, giving birth to a new competitor and a totally different landscape in the telecommunications sector in Portugal.

A TV do Mundial

No último ano da primeira década do século XXI, quase a entrar na era da televisão digital, importa saber que modelo de TV existe em Portugal. A análise da programação informativa destinada a acompanhar o Campeonato do Mundo de Futebol 2010 ajudará, decerto, a encontrar respostas. Neste artigo, apresentamos um estudo que incidiu em formatos informativos sobre este grande evento mediático, emitidos nos canais generalistas e temáticos entre os dias 11 de Junho e 11 de Julho de 2010 (datas de arranque e fecho do Mundial de Futebol da África do Sul). Essa análise, que incidiu em 604 emissões, procurou conhecer as formas de integração do telespectador nas emissões televisivas e quem foi chamado aos estúdios televisivos para participar nos debates aí promovidos. Os dados apurados demonstram claramente que esta TV do Mundial continua pouco aberta à participação do público e circunscrita a um grupo restrito de convidados, a maior parte dos quais oriundos da classe jornalística. Não é possível falar-se numa terceira fase do audiovisual. A hiper-televisão pode esperar.

Simulation of a rectifier malfunction on a offshore wind system with HVDC transmission

A new integrated mathematical model for the simulation of an offshore wind system having a rectifier input voltage malfunction at one phase is presented in this paper. The mathematical model considers an offshore variable-speed wind turbine on a floating platform, equipped with a permanent magnet synchronous generator using full-power three-level converter to inject energy into the electric network, through a high voltage direct current transmission submarine cable. The model for the drive train is a discrete three mass, incorporating the dynamic of the moving surface. A case study is presented to access conclusion about the malfunction.

Processing and characterization of plates made from granulate of waste electrical cables

This article is intended to evaluate the density and the mechanical, acoustic and thermal properties of compression moulded plates composed of granulate from electrical cables wastes. Those cable wastes are the insulation part from the electric cables, and are composed of PVC, PE, EMP and PEX rubber. After these materiais lose their initial properties and cease to be useful as insulation material, due to safety requirements, it is possible to reuse them into new applications like industrial or playground floorings, as sound insulation material to be applied in walls or floors, or to dampen vibrations from equipments. Recovering electric cable waste has been a major concern to the European Commission due to its leveis of toxicity when incineration and land fill ing is the solution to dispose this material. Such as the European Commission's study for DG Xl[1] suggested that recycling may be the most favourable future waste management option.