Estudio de la reaccion de sulfurizacion de precursores Cu/In para la formacion de capas delgadas policristalinas de CuInS2 para celulas solares

En este trabajo se presenta un estudio detallado de los procesos implicados en la sulfurización de capas metálicas de Cu-In para la fabricación de células solares de CuInS2. Con este objeto, se ha desarrollado un experimento de sulfurización parcial de las capas, que han sido sometidas posteriormente a un tratamiento de selenización. El estudio de estas estructuras mediante Espectroscopía Raman y Espectroscopía de Electrones Auger (AES) ha permitido conocer algunos de los detalles de la reacción química, en concreto la identificación del frente de crecimiento de la reacción de sulfurización. Paralelamente, se ha desarrollado un sistema experimental que ha hecho posible investigar in-situ la reacción de sulfurización por Espectroscopía Raman, lo cual ha permitido un seguimiento preciso de la evolución estructural del material durante el proceso. Los resultados experimentales demuestran que la reacción de sulfurización se inicia en la superficie de la capa, dando lugar a la formación de CuInS2, coexistiendo dos estructuras cristalinas polimórficas (calcopirita y orden catiónico CuAu). Posteriormente la reacción química continúa asistida por la difusión de los metales hacia la superficie, que reaccionan con la atmósfera de azufre, de forma simultánea se produce una transformación de la fase CuAu del compuesto en la estructura calcopirita.

Turfeiras da Serra do Espinhaço Meridional - MG: I - caracterização e classificação

As turfeiras são ambientes especiais para estudos relacionados com a dinâmica da matéria orgânica, evolução das paisagens, mudanças climáticas e ciclos de poluição atmosférica locais, regionais e globais. Elas contribuem para o sequestro global de carbono, funcionam como reservatórios de água e constituem o ambiente de uma biodiversidade endêmica. A Serra do Espinhaço Meridional (SdEM), "Reserva da Biosfera Terrestre", apresenta uma área significativa formada por diferentes tipos de turfeira, que foram descritas em três perfis, situados a 1.250 m (P1), 1.800 m (P2) e 1.350 m (P4) de altitude e classificados respectivamente como Organossolo Háplico Sáprico térrico (P1), Organossolo Háplico Fíbrico típico (P2) e Organossolo Háplico Hêmico típico (P4), de acordo com o Sistema Brasileiro de Classificação de Solos. Os três perfis foram caracterizados morfologicamente e, nas amostras coletadas, foram realizadas análises químicas, físicas e microbiológicas. Verificou-se que a localização, a altitude e a drenagem influenciaram os atributos morfológicos, físicos, químicos e microbiológicos das turfeiras da SdEM. O estádio de decomposição da matéria orgânica é mais avançado com a melhoria da drenagem nas turfeiras. O teor de metais pesados está relacionado com o teor e a composição granulométrica da fração mineral e com a localização das turfeiras. O perfil P1 apresentou os mais elevados teores médios de Ti, Zr e Pb; em P2 foram detectados os teores médios mais elevados de Mn, Zn e Cu; e o teor médio de Fe é mais elevado em P4. A intensidade da atividade microbiológica das turfeiras P2 e P4 relacionou-se com sua drenagem e com o teor de metais pesados de suas camadas.

Metais pesados em solos de área de mineração e metalurgia de chumbo: I - Fitoextração

A fitoextração tem sido sugerida como alternativa viável às práticas tradicionais de recuperação de solos contaminados por metais pesados (remoção do solo e destinação em aterros ou coprocessamento em cimento, etc.), em razão dos menores custos e por ser menos impactante ao ambiente. Este trabalho objetivou avaliar a fitoextração induzida (uso de ácido cítrico como agente quelante) de metais pesados, com o cultivo de aveia-preta (Avena strigosa Schreber), girassol (Helianthus annuus L.) e grama-batatais (Paspalum notatum Flügge), em solos poluídos (solos 2, 3 e 4) de uma área de mineração de Pb em Adrianópolis (PR). O solo 1 foi amostrado em área de mata nativa (referência). O experimento foi realizado em casa de vegetação, com três repetições. Foram determinados os teores de Pb, Cd, Cu, Ni, Cr e Zn no solo com HNO3/HCl (3:1) concentrados. Após a colheita das plantas, determinaram-se a massa de matéria seca e os teores de metais pesados nas raízes e parte aérea (digestão nítrico-perclórica). Os solos contaminados (2, 3 e 4) apresentaram as seguintes faixas de teores de metais pesados (mg kg-1): Pb - 2.598,5 a 9.678,2; Cd - 1,9 a 22,2; Cu - 165,5 a 969,2; Ni - 22,6 a 38,4; Cr - 15,2 a 27,8; e Zn - 87,4 a 894,8. A adição de quelante não induziu a uma absorção mais efetiva de metais pesados pelas plantas. O solo 2 possibilitou melhor crescimento das plantas, e o girassol deve ser preferido na fitorremediação das áreas sob as mesmas condições. Na área próxima à planta fabril (solo 3) e nas áreas com grande ocorrência de rejeitos (solo 4), a fitoextração não foi eficiente. Nesses ambientes, recomenda-se o estudo de outras plantas nativas e, ou, exóticas resistentes a altos teores de Pb (solo 3) ou a remobilização de solo mais rejeito para aterros industriais (solo 4).

Vibrational behaviour of bcc Cu-based shape memory alloys close to the martensitic transition

Experimental data from ultrasonic and inelastic neutron scattering measurements are analyzed for different families of Cu-based shape-memory alloys. It is shown that the transition occurs at a value, independent of composition and alloy family, of the ratio between the elastic constants associated with the two shears necessary to accomplish the lattice distortion from the bcc to the close-packed structure. The zone boundary frequency of the TA2[110] branch evaluated at the transition point (TM), weakly depends, for each family, on composition. A linear relationship between this frequency and the inverse of the elastic constant C', both quantities evaluated at TM, has been found, in agreement with the prediction of a Landau model proposed for martensitic transformations.

Disorder-induced critical phenomena in magnetically glassy Cu-Al-Mn alloys

Measurements of magnetic hysteresis loops in Cu-Al-Mn alloys of different Mn content at low temperatures are presented. The loops are smooth and continuous above a certain temperature, but exhibit a magnetization discontinuity below that temperature. Scaling analysis suggest that this system displays a disorder-induced phase transition line. Measurements allow one to determine the critical exponents ß=0.03±0.01 and ß¿=0.4±0.1, which coincide with those reported recently in a different system, thus supporting the existence of universality for disorder-induced critical points.

Kinetics of martensitic transitions in Cu-Al-Mn under thermal cycling: Analysis at multiple length scales

In this paper we study the evolution of the kinetic features of the martensitic transition in a Cu-Al-Mn single crystal under thermal cycling. The use of several experimental techniques including optical microscopy, calorimetry, and acoustic emission, has enabled us to perform an analysis at multiple scales. In particular, we have focused on the analysis of avalanche events (associated with the nucleation and growth of martensitic domains), which occur during the transition. There are significant differences between the kinetics at large and small length scales. On the one hand, at small length scales, small avalanche events tend to sum to give new larger events in subsequent loops. On the other hand, at large length scales the large domains tend to split into smaller ones on thermal cycling. We suggest that such different behavior is the necessary ingredient that leads the system to the final critical state corresponding to a power-law distribution of avalanches.

Hysteresis in a system driven by either generalized force or displacement variables: martensitic phase transition in single-crystalline Cu-Zn-Al

We report on experiments aimed at comparing the hysteretic response of a Cu-Zn-Al single crystal undergoing a martensitic transition under strain-driven and stress-driven conditions. Strain-driven experiments were performed using a conventional tensile machine while a special device was designed to perform stress-driven experiments. Significant differences in the hysteresis loops were found. The strain-driven curves show reentrant behavior yield point which is not observed in the stress-driven case. The dissipated energy in the stress-driven curves is larger than in the strain-driven ones. Results from recently proposed models qualitatively agree with experiments.

State equation for shape-memory alloys. Aplication to Cu-Zn-Al

We deal with the hysteretic behavior of partial cycles in the two¿phase region associated with the martensitic transformation of shape¿memory alloys. We consider the problem from a thermodynamic point of view and adopt a local equilibrium formalism, based on the idea of thermoelastic balance, from which a formal writing follows a state equation for the material in terms of its temperature T, external applied stress ¿, and transformed volume fraction x. To describe the striking memory properties exhibited by partial transformation cycles, state variables (x,¿,T) corresponding to the current state of the system have to be supplemented with variables (x,¿,T) corresponding to points where the transformation control parameter (¿¿ and/or T) had reached a maximum or a minimum in the previous thermodynamic history of the system. We restrict our study to simple partial cycles resulting from a single maximum or minimum of the control parameter. Several common features displayed by such partial cycles and repeatedly observed in experiments lead to a set of analytic restrictions, listed explicitly in the paper, to be verified by the dissipative term of the state equation, responsible for hysteresis. Finally, using calorimetric data of thermally induced partial cycles through the martensitic transformation in a Cu¿Zn¿Al alloy, we have fitted a given functional form of the dissipative term consistent with the analytic restrictions mentioned above.

Preisach modeling of hysteresis for a pseudoelastic Cu-Zn-Al single crystal

Stress-strain trajectories associated with pseudoelastic behavior of a Cu¿19.4 Zn¿13.1 Al (at.%) single crystal at room temperature have been determined experimentally. For a constant cross-head speed the trajectories and the associated hysteresis behavior are perfectly reproducible; the trajectories exhibit memory properties, dependent only on the values of return points, where transformation direction is reverted. An adapted version of the Preisach model for hysteresis has been implemented to predict the observed trajectories, using a set of experimental first¿order reversal curves as input data. Explicit formulas have been derived giving all trajectories in terms of this data set, with no adjustable parameters. Comparison between experimental and calculated trajectories shows a much better agreement for descending than for ascending paths, an indication of a dissymmetry between the dissipation mechanisms operative in forward and reverse directions of martensitic transformation.

Elastic constants of the beta-Cu-Zn alloy system: A Monte Carlo study

Monte Carlo calculations of the isothermal elastic constants of the beta-CuxZn1-x alloy system as a function of the composition have been carried out. We assume the atoms interact via a two-body Morse potential function and use numerical values for the potential parameters evaluated taking into account experimental data. We find a quite good agreement between our results and the expected experimental behavior.

Magnetic microstructures from magnetic force microscopy and Monte Carlo simulation in CoFe-Ag-Cu granular films

CoFe-Ag-Cu granular films, prepared by rf sputtering, displayed magnetic domain microstructures for ferromagnetic concentrations above about 32% at, and below the percolation threshold. All samples have a fcc structure with an (111) texture perpendicular to the film plane. Magnetic force microscopy (MFM) showed a variety of magnetic domain microstructures, extremely sensitive to the magnetic history of the sample, which arise from the balance of the ferromagnetic exchange, the dipolar interactions and perpendicular magnetocrystalline anisotropy, MFM images indicate that in virgin samples, magnetic bubble domains with an out-of-plane component of the magnetization are surrounded by a quasicontinuous background of opposite magnetization domains. The application of a magnetic field in different geometries drastically modifies the microstructure of the system in the remanent state: i) for an in-plane field, the MFM images show that most of the magnetic moments are aligned along the film plane, ii) for an out-of-plane field, the MFM signal increases about one order of magnitude, and out-of-plane striped domains with alternating up and down magnetization are stabilized. Numerical simulations show that a variety of metastable domain structures (similar to those observed experimentally) can be reached, depending on magnetic history, in systems with competing perpendicular anisotropy, exchange and dipolar interactions.

Elements traça en esfalerites i galenes del dipòsit de Cierco (Pb-Zn). Alta Ribagorça, Pirineu Central

El diposit consisteix en dos filons E-W, tallats per un altre N-S. El rebliment filonia ès zonat amb esfalerita- galena-calcita als nivells profunds i galena-baritina als superiors. Els elements traça en esfalerites i galenes, plenament separades, han estat analitzats mitjancant fluorescència de raigs X. Els resultats mostren que l'esfalerita concentra la majoria d'elements traça, preferentment Fe, Co, Cd, Sn, Sb, Ga, Cu, Ge i Ag, amb una bona correlació entre els sis primers. La galena concentra únicament Sb, Ag i As, amb bona correlació entre els dos primers. Els continguts en elements traça estan homogèniament distribuits en tot el diposit.

Effects of long-term irrigation with treated wastewater. Part I: Evolution of soil physico-chemical properties

The long-term impact of irrigation on a Mediterranean sandy soil irrigated with Treated wastewater (TWW) since 1980 was evaluated. The main soil properties (CEC, pH, size distribution, exchangeable cations and chloride, hydraulic conductivity) as well as the organic matter and Cu, Cr and Pb speciation in an irrigated soil and a non-irrigated control soil at various soil depths were monitored and compared during a 2 years experiment. In this first part, the evolution of the physico-chemical soil properties was described. The irrigation with TWW was beneficial with regard to water and nutrient supplying. All the exchangeable cations other than K(+) were higher in the irrigated soil than in the reference one. A part of the exchangeable cations was not fixed on the exchange complex but stored as labile salts or in concentrated soil solution. Despite the very sandy soil texture, both saturated and unsaturated hydraulic conductivity exhibited a significant diminution in the irrigated soil, but remained high enough to allow water percolation during rainy periods and subsequent leaching of accumulated salts, preventing soil salinization. In the irrigated soil, exchangeable sodium percentage (ESP) exhibited high values (20% on average) and the soil organic C was lower than in the reference. No significant effect was noticed on soil mineralogical composition due to irrigation. (C) 2010 Published by Elsevier Ltd.