964 resultados para CHEMICAL-STRUCTURE
Resumo:
The hydrolysis reaction mechanism of phosphite antioxidants is investigated by liquid chromatography-mass spectrometry (LC/MS). The phosphites were chosen because they differed in chemical structure and phosphorus content. Dopant assisted-atmospheric pressure photoionization (DA-APPI) is chosen as the ion source for (lie ionization of the compounds. [it our previous work, DA-APPI was shown to offer an attractive alternative to atmospheric pressure chemical ionization (APCI) since it provided background-ion free mass spectra and higher sensitivity [M. Papanastasiou, et al., Polymer Degradation and Stability 91 (11) (2006) 2675-2682]. In positive ion mode, the molecules are generally detected in their protonated form. In negative ion mode, the phosphites are unstable and only fragment ions are observed: these however, are characteristic of each phosphite and may be used for the identification of the analytes in complex mixtures. The analytes under investigation are exposed to accelerated humid ageing conditions and their hydrolytic pathway and stability is investigated. Different substituents around the phosphorus atom are shown to have a significant effect on the stability of the phosphites, with phenol substituents producing very hydrolytically stable structures. Alkanox P24 and PEP-36 follow a similar hydrolytic pathway via the scission of the first and then the second P-O-phenol bonds, eventually leading to the formation of phenol, Phosphorous acid and pentaerythritol as end products. HP-10 exhibits a rather different Structure and the products detected suggest scission of either the P-O-hydrocarbon or one of the P-O-phenol bonds. A phenomenon similar to that of autocatalysis is observed for all phosphites and is attributed to the formation of dialkyl phosphites as intermediate products. (C) 2008 Elsevier B.V. All rights reserved.
Resumo:
The aim of this work was to evaluate the effect of the storage time on the thermal properties of triethylene glycol dimethacrylate/2,2-bis[4-(2-hydroxy-3-methacryloxy-prop-1-oxy)-phenyl]propane bisphenyl-alpha-glycidyl ether dimethacrylate (TB) copolymers used in formulations of dental resins after photopolymerization. The TB copolymers were prepared by photopolymerization with an Ultrablue IS light-emitting diode, stored in the dark for 160 days at 37 degrees C, and characterized with differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and Fourier transform infrared spectroscopy with attenuated total reflection. DSC curves indicated the presence of an exothermic peak, confirming that the reaction was not completed during the photopolymerization process. This exothermic peak became smaller as a function of the storage time and was shifted at higher temperatures. In DMA studies, a plot of the loss tangent versus the temperature initially showed the presence of two well-defined peaks. The presence of both peaks confirmed the presence of residual monomers that were not converted during the photopolymerization process. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 112: 679-684, 2009
Resumo:
Superfine wool powder was blended and extruded with poly(propylene) (PP) to produce blend pellets, and the extruded pellets were hot-pressed into a blend film. SEM photographs show that the powder could be uniformly incorporated with PP after extrusion. FT-IR spectra shows that no substantial changes occurred in the chemical structure of both PP and wool powder in the blend film. X-Ray diffraction analysis indicates that crystallinity of the blend film was much higher than that of the wool powder and little lower than that of PP. TG-tested results indicate that the thermal stability of the blend film declined with an increase in the powder content. Endothermic peaks of the wool powder in the blend film become more obvious as the powder content increases. Mechanical properties decline greatly with an increase in the wool powder content in the blend film.
Resumo:
In this study, superfine wool powder was plasticized with glycerol and hot-pressed into a film. Scanning electron microscopy photos showed that the superfine wool powder could be molded into a smooth film and that the wool powder was distributed evenly in the cross section of the film. Fourier transform infrared analysis revealed no substantial changes in the chemical structure of the wool powder after hot pressing, but the absorbing peaks of glycerol were found in the spectrum. X-ray diffraction analysis showed that the overall crystallinity increased after the wool powder was hot-pressed into film. Thermogravimetry (TG) analysis indicated that the thermal stability of the hot-pressed film decreased. A transition point appeared in the TG curve of the wool hot-pressed film as glycerol was added. The differential thermal analysis curve of the film showed sharp absorbing peaks similar to that of wool powder. With increasing glycerol content, the film showed increasing ductility and softness.
Resumo:
We employed a highly specific photoaffinity labeling procedure, using 14C-labeled S-adenosyl-L-methionine (AdoMet) to define the chemical structure of the AdoMet binding centers on cyclosporin synthetase (CySyn). Tryptic digestion of CySyn photolabeled with either [methyl-14C]AdoMet or [carboxyl-14C]AdoMet yielded the sequence H2N-Asn-Asp-Gly-Leu-Glu-Ser-Tyr-Val-Gly-Ile-Glu-Pro-Ser-Arg-COOH (residues 10644-10657), situated within the N-methyltransferase domain of module 8 of CySyn. Radiosequencing detected Glu10654 and Pro10655 as the major sites of derivatization. [carboxyl-14C]AdoMet in addition labeled Tyr10650. Chymotryptic digestion generated the radiolabeled peptide H2N-Ile-Gly-Leu-Glu-Pro-Ser-Gln-Ser-Ala-Val-Gln-Phe-COOH, corresponding to amino acids 2125-2136 of the N-methyltransferase domain of module 2. The radiolabeled amino acids were identified as Glu2128 and Pro2129, which are equivalent in position and function to the modified residues identified with tryptic digestions in module 8. Homology modeling of the N-methyltransferase domains indicates that these regions conserve the consensus topology of the AdoMet binding fold and consensus cofactor interactions seen in structurally characterized AdoMet-dependent methyltransferases. The modified sequence regions correspond to the motif II consensus sequence element, which is involved in directly complexing the adenine and ribose components of AdoMet. We conclude that the AdoMet binding to nonribosomal peptide synthetase N-methyltransferase domains obeys the consensus cofactor interactions seen among most structurally characterized low molecular weight AdoMet-dependent methyltransferases.
Resumo:
The 1,3 dipolar cycloaddition between carbonyl ylids (generated from cyclobutene epoxides flanked by esters) and norbornyl alkenes – the ACE reaction – offers a facile method for the construction of polynorbornyl molecular frameworks. This reaction has, as described in this dissertation, underpinned the construction of molecular frameworks that have peptides and amino acids attached. Such highly rigid peptide-frameworks are of use in the field of peptidomimetics; the template molecule governs the final positioning of any attached groups such that a precise arrangement of amino acids can be achieved without the need to construct entire proteins. In the course of any ACE reaction the ester flanked cyclobutene epoxide is transformed to a 1,3 dipole, the esters serve to stablise this reactive intermediate and are as a consequence incorporated in the reaction product. Modification of these esters provides pseudo-equatorial points for peptide attachment. These methyl esters were replaced with tert-butyl esters to provide pseudo-axial attachment points that could be selectively addressed. The optimal strategy for peptide-framework construction involved direct condensation of carboxyl protected amino acids to bicyclo[2.2.1]hept-5-ene-2-endo-carboxylic acid as well as condensation of amino acids to cyclobutene epoxides derived from this acid. The ACE reaction of (±) bicycloheptene-2-endo-carboxylic acid derivatives with cyclobutene epoxides synthesised from such racemic acid derivatives provided a mixture of enantiomers and meso compounds. In order to control the position of the attachment points – and hence the final location of the attached peptides – the ACE reaction required chiral starting materials. Accordingly, all peptidoframeworks were derived from the chiral (2S)-(-)-bicycloheptene carboxylic acid. The ACE reaction of this (S)-norbornene with the (S)-epoxide provided a peptide framework in which the attached amino acids were positioned pseudo-axially. Deprotection of the amino acid allowed peptide chain building in the pseudo-axial direction. Using this strategy a framework with an alanine residue and a triglycine peptide was synthesised. By combining this strategy with the ter-butyl ester variant a framework with pseudo-axial alanine and pseudo-equatorial glycine residues was manufactured.
Resumo:
This article reports the preliminary findings on the morphology, chemical structure, antimicrobial and UV-screening properties of bamboo fibres. Bamboo fibres provide a very promising alternative to other natural fibres by virtue of their distinctive characteristics such as eco-friendly farming, inherent antimicrobial, UV-protective and highly· breathable properties. However, these novel properties are moslly claimed by fibre manufacturers, with little scientific evidence. Moreover, those properties may largely depend on the manufacturing process, which is not widely disclosed by the manufacturers, Common manufacturing processes may require the use of a large amount of chemicals which would not make the product truly eco-friendly. Therefore, there is a strong need for unbiased laboratory experiments being conducted in a rigorous manner to elucidate the origin of those unique properties of bamboo fibres and to develop new processing methods to effectively utilise the properties in the final products. This research is aimed to prove the unique characteristics of bamboo fibres scientifically and to develop an efficient manufacturing process, in order to establish the place of bamboo fibres as a novel green material.
Resumo:
BACKGROUND: In transmission and scanning electron microscopy imaging, the ability to obtain sufficient contrast between the components of a blend when they are both of a similar chemical structure still remains problematic. This paper investigates the domain morphology of a polymer blend containing two polyamides, nylon 6 and the semi-aromatic polyamide poly(m-xylene adipamide) (MXD6), using scanning electron microscopy in backscattered electron imaging mode. The efficiency of three staining agents, ruthenium tetroxide, phosphotungstic acid and silver sulfide, in obtaining optimum phase contrast between the two polymers is discussed.
RESULTS: The use of silver sulfide as a staining agent was found to be a fast and reliable approach which required basic sample preparation and provided excellent compositional contrast between the phases present in the nylon 6/MXD6 blends compared to the other staining agents.
CONCLUSIONS: The technique described in this paper is believed to be a novel and versatile method that has the potential to further improve the ability to study complex polymer blends where one polymer contains an aromatic ring.
Resumo:
The drug development for neurodegenerative disorders are the major challenge to the science in 21st century. Many FDA approved drugs currently available in the market have limitations in crossing the blood brain barrier (BBB) owing to its complicated vasculature posed by the presence of specialized cells. Nanotechnology is an emerging interdisciplinary area, which have many applications including drug delivery. Nanocarrier drug delivery involves targeting drugs enclosed in a particular polymer and/or amphiphilic lipids. Controlled release, nanoplatform availability for combinatorial therapy and tissue specific targeting by using advanced technologies such as molecular Trojan horse (MTH) technology are the promises of nanotechnology. Different problems are associated with drug delivery
across the BBB. Some are mostly related to the structure of brain microvasculature system while the others are related to the nanomaterial
structure. Different strategies, such as using polymeric/solid lipid nanoparticles and surface modification of nanomaterial with surfactants
like polysorbates have been conducted to solve these limitations. Also, nanodrug formulations with double coatings have been designed for oral delivery of drugs to overcome reticulo-endothelial system and to improve their BBB permeability. It seems that the best choice of strategy and material could be achieved with regard to the physical and chemical structure of the drugs. The present review discusses the potential applications of nanotechnology for drug delivery across the BBB.
Resumo:
Ageing can lead to the degradation of the tensile properties of natural rubber. The ageing process causes changes in the polymer segmental motion as well as the chemical structure, both of which can be monitored using nuclear magnetic resonance (NMR) spectroscopy. This work demonstrates that NMR can quantify rubber degradation due to ageing, and also that relatively simple NMR equipment can be used. This simpler equipment can be made portable and so could give a simple and fast indication of the condition of rubber in service. The 1H NMR transverse relaxation time, T2, and the 13C NMR spectrum using cross polarization and magic angle spinning (CP MAS) for samples taken at various levels of a degraded natural rubber liner were compared. These experiments showed that, as the level of degradation increased, the 1H NMR transverse relaxation time decreased. The 13C spectra showed considerable peak broadening, indicative of decreased mobility with increased level of degradation as well as the presence of degradation products. Further investigations using lower powered NMR equipment to measure the 1H NMR transverse relaxation times of two different series of natural rubbers were also performed. This work has shown that this simpler method is also sensitive to structural and mechanical property changes in the rubber. This method of monitoring rubber degradation could lead to the non-destructive use of NMR to determine the condition of a part in service.
Resumo:
The thesis outlines effective methods of designing and constructing chiral nano-porous materials. These materials may facilitate cheaper and large-scale production of chiral molecules, such as pharmaceuticals and bioactives. Computer models of target materials correlated well with laboratory experiments and effective synthetic strategies for manufacture were developed.
Resumo:
The Co2+ sorption of two wool powders was investigated using its radioisotope 57Co (T1/2=271.8 days and γ=122.1 and 136.5 keV) as a tracer. The effects of the type of buffer, the pH value, the contact time and the initial concentration of Co2+ on the sorption behaviour of wool powders were studied. The Co2+ releasing ability of wool powders and the re-use of wool powders to sorb Co2+ were also examined. The optimum sorption of Co2+ by the powders occurred at pH 8 in phosphate buffer and pH 10 in ammonium sulphate buffer. Fourier-transform infrared spectroscopy (FTIR) was used to study the changes in chemical structure of the wool after exposure to both buffer solutions. Compared to the untreated wool fibre, the fine wool powders showed rapid sorption rates and high sorption capacities for Co2+. Co2+ ions were recovered after exposing the Co2+ loaded wool to HCl (0.1 M) and buffer at pH 3 (glycine/sodium chloride). After releasing Co2+ ions from wool powders, the efficiency of wool powders re-used to sorb Co2+ was 80% of that of the fresh wool powders. It is concluded from this study that wool powder can be used as an efficient sorbent to remove and release Co2+ from solution.
Resumo:
The data covers the following:
X-ray photoelectron spectroscopy (XPS) - to collect surface chemical structure changes (using RMIT instrument);
Scanning electron microscopy (SEM) - to collect surface physical structure changes;
Atomic force microscopy (AFM) - to collect surface morphology changes;
Internal/External quantum efficiency (IQE/EQE) – to collect DSSC (Dye Sensitised Solar Cells) efficiency data;
Discharge/Charge capacity - to collect battery efficiency data.