Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

Damage location in structures by monitoring vibration characteristics

The aim of this work was to investigate the feasibility of detecting and locating damage in large frame structures where visual inspection would be difficult or impossible. This method is based on a vibration technique for non-destructively assessing the integrity of structures by using measurements of changes in the natural frequencies. Such measurements can be made at a single point in the structure. The method requires that initially a comprehensive theoretical vibration analysis of the structure is undertaken and from it predictions are made of changes in dynamic characteristics that will occur if each member of the structure is damaged in turn. The natural frequencies of the undamaged structure are measured, and then routinely remeasured at intervals . If a change in the natural frequencies is detected a statistical method. is used to make the best match between the measured changes in frequency and the family of theoretical predictions. This predicts the most likely damage site. The theoretical analysis was based on the finite element method. Many structures were extensively studied and a computer model was used to simulate the effect of the extent and location of the damage on natural frequencies. Only one such analysis is required for each structure to be investigated. The experimental study was conducted on small structures In the laboratory. Frequency changes were found from inertance measurements on various plane and space frames. The computational requirements of the location analysis are small and a desk-top micro computer was used. Results of this work showed that the method was successful in detecting and locating damage in the test structures.

The effect of major roads upon the local economy:a study of industrial location and its effects

The economic effects of road building (beyond those accounted for in cost-benefit analysis) are not well understood. This thesis examines the issues surrounding those effects and attempts to clarify the relationship between road building and industrial location and to identify the effect on employment of that location. The literature reviewed leads to some doubt as to the efficacy of roads as an economic tool. A scries of interviews with representatives of business and property professionals in three areas adjacent to motorways is carried out. These covered the firms' location or relocation decisions, their production costs, transport needs and employment. The conclusions drawn echo the above statements based on reviewed literature: 1. There was a general lack of knowledge of transport within a firm despite subjects' very good understanding of the rest of the firms' operations. 2. The importance of major roads to the business location decision and its perceived importance to the operations of the firms was low. Property professionals sec roads as an effective marketing tool. 3. Firms have a tendency to shed labour upon relocation although this does not necessarily constitute a net loss of employment but a redistribution. Recommendations are made for further research.

International business research and risky investments, an analysis of FDI in conflict zones

The purpose of this paper is to examine the determinants of a firm's strategy to invest in a conflict location. To the best of our knowledge, this has not been done before. We examine this using a standard model of international business, overlaid with the fundamental approach to corporate social responsibility. We start with the population of multinationals who have chosen to invest in low income countries with weak institutions. We then split this sample in order to distinguish between firms that have invested in conflict regions compared to those that have not. Our analysis then proceeds to explain the decision of those firms to invest in conflict locations using a simple Probit model. We find that countries with weaker institutions and less concern about corporate social responsibility (CSR) are more likely to invest in conflict regions. Finally, firms with more concentrated ownership are more likely to invest in such locations. © 2012 Elsevier Ltd.

Agents for change and changed agents:the micro-politics of change and feminism in the academy

This article explores gender politics and processes in the academy and investigates change from the perspectives of feminist academics. In particular, it explores the experiences of women academics attempting to effect change to the gendered status quo of their own institutions. Focusing on micro-politics, the feminist movement is empirically explored in localized spaces of resistance and in the small but significant individual efforts at making changes in academic institutions. The analysis is based on interviews with female academics working in business and management schools and focuses on the challenges for change and how change attempts affect their personal and professional identities. The article explores the range of change strategies that participants use as they try to progress in their academic career while staying true to their feminist values and priorities through both resisting and incorporating dominant discourses of academic work. The analysis highlights such tensions and focuses on a contextualized, bottom-up perspective on change that, unlike more totalizing theorization, takes into account mundane and lived experiences at the level of the individual. © 2012 Blackwell Publishing Ltd.

Servitization of the manufacturing firm:exploring the operations practices and technologies that deliver advanced services

Purpose: This paper aims to explore practices and technologies successfully servitised manufacturers employ in the delivery of advanced services. Design/methodology/approach: A case study methodology is applied across four manufacturing organisations successful in servitization. Through interviews with personnel across host manufacturers, their partners, and key customers, extensive data are collected about service delivery systems. Analyses identify convergence in their practices and technologies. Findings: Six distinct technologies and practices are revealed: facilities and their location, micro-vertical integration and supplier relationships, information and communication technologies (ICTs), performance measurement and value demonstration, people deployment and their skills, and business processes and customer relationships. These are then combined in an integrative framework that illustrates how operations are configured to successfully deliver advanced services. Research limitations/implications: The analyses are reductive and rationalising. Future studies could identify other technologies and practices. Case study as a method is inherently limited in the extent to which findings can be generalised. Practical implications: Awareness and interest in servitization is growing, yet adoption of a servitization strategy requires particular organisational capabilities on the part of the manufacturer. This study identifies technologies and practices that underpin these capabilities. Originality/value: This paper contributes to the understanding of the servitization process and, in particular, the implications to broader operations of the firm. © Emerald Group Publishing Limited.

3D reconstruction of the complex dielectric function of glass during femtosecond laser micro-fabrication

We report on a new technique to reconstruct the 3D dielectric function change in transparent dielectric materials and the application of the technique for on-line monitoring of refractive index modification in BK7 glass during direct femtosecond laser microfabrication. The complex optical field scattered from the modified region is measured using two-beam, single-shot interferogram and the distribution of the modified refractive index is reconstructed by numerically solving the inverse scattering problem in Born approximation. The optical configuration suggested is further development of digital holographic microscopy. It takes advantage of high spatial resolution and almost the same optical paths for both interfering beams, and allows ultrafast time resolution. © Springer Science+Business Media, LLC. 2011.

Tsunami disaster recovery experience:a case study on micro, small and medium scale enterprises in Southern Sri Lanka

Post-disaster recovery of Micro, Small and Medium-Scale Enterprises (SMEs) remains an issue of interest for policy and practice given the wide scale occurrences of natural disasters around the globe and their significant impacts on local economies and SMEs. Asian Tsunami of December 2004 affected many SMEs in southern Sri Lanka. The study was developed to identify the main issues encountered by the Tsunami affected SMEs in Southern Sri Lanka in the process of their post-tsunami recovery. The study: a) identifies tsunami damage and loss in micro and SMEs in the Galle district; b) ascertains the type of benefits received from various parties by the affected micro and SMEs; c) evaluates the problems and difficulties faced by the beneficiary organizations in the benefit distribution process; and d) recommends strategies and policies for the tsunami-affected micro and SMEs for them to become self-sustaining within a reasonable time frame. Fifty randomly selected tsunami-affected micro and SMEs were surveyed for this study. Interviews were conducted in person with the business owners in order to identify the damages, recovery, rehabilitation, re-establishment and difficulties faced in the benefit distribution process. The analysis identifies that the benefits were given the wrong priorities and that they were not sufficient for the recovery process. In addition, the many governance-related problems that arose while distributing benefits are discussed. Overall, the business recovery rate was approximately 65%, and approximately 88% of business organizations were sole proprietorships. Therefore, the policies of the tsunami relief agencies should adequately address the needs of sole proprietorship business requirements. Consideration should also be given to strengthen the capacity and skills of the entrepreneurs by improving operational, technological, management and marketing skills and capabilities.

Metformin:effects on micro and macrovascular complications in type 2 diabetes

Introduction: The antihyperglycaemic agent metformin is widely used in the treatment of type 2 diabetes. Data from the UK Prospective Diabetes Study and retrospective analyses of large healthcare databases concur that metformin reduces the incidence of myocardial infarction and increases survival in these patients. This apparently vasoprotective effect appears to be independent of the blood glucose-lowering efficacy. Effects of metformin: Metformin has long been known to reduce the development of atherosclerotic lesions in animal models, and clinical studies have shown the drug to reduce surrogate measures such as carotid intima-media thickness. The anti-atherogenic effects of metformin include reductions in insulin resistance, hyperinsulinaemia and obesity. There may be modest favourable effects against dyslipidaemia, reductions in pro-inflammatory cytokines and monocyte adhesion molecules, and improved glycation status, benefiting endothelial function in the macro- and micro-vasculature. Additionally metformin exerts anti-thrombotic effects, contributing to overall reductions in athero-thrombotic risk in type 2 diabetic patients. © 2008 Springer Science+Business Media, LLC.

The global plant location decision

The global plant location decision is important since it involves the allocation of significant resources and may influence the long term competitiveness of firms. The decision is also complex, taking into account a wide range of factors. The decision should involve the consideration of both international business issues as well as manufacturing strategy. Firms may be seeking access to markets, to low cost labour, or new skills and competencies. In the past there has been some emphasis on firms offshoring production to lower cost regions. Case studies from the authors’ experience of advising clients in this decision show that for ‘luxury’ products, firms have chosen to invest further capacity in home country engineering and manufacturing to maintain quality and brand integrity, despite the fact that these locations are higher cost. On the other hand, for ‘standard’ products, firms have located additional capacity closer to target markets to access lower costs.

Ideological aspects of the translation of business annual reports in Oman (English-Arabic)

The socioeconomic context in the renaissance era in Oman has resulted in the development of new forms of discursive prastises and thus, in the introduction of new genres. One of these new genres is the business annual report, which in Oman exists in English and Arabic. This thesis examines the role of translation in the production of annual reports. This research makes a contribution to the field of Translation Studies by examining institutional translation in order to gain insights into translation agents, processes, practises and underlying policies with reference to national business institutions in their sociopolitical and historical and institutional contexts .Business reports are still largely under-researched as a genre in Translation Studies. The thesis starts with an overview of relevant aspects of Translation Studies to arrive at a theoretical framework which informs the analysis. The empirical analysis is based on sixty seven reports produced by different Oman-based companies which vary in size and organisational patterns. Annual reports are characterised as a genre in terms of function and structure at the macro-level as well as the micro-level. They have an informative and a persuasive function, as they are produced by different companies in their attempt to promote and fulfil their respective business interests and objectives.The thesis presents the sociocultural and political contexts of the production of the English and Arabic versions of the annual reports, focusing on the underlying functions and principles of institutions and agents. The next chapter illustrates the textual profiles of the English and the Arabic versions, identifying typical translation strategies. The discussion here operates within the framework of product-oriented Descriptive Translation Studies (Lambert and van Gorp 1985). It is argued that the two language versions reflect aspects of ideology, political affiliation and power relations at both the macro and micro- structural levels. These ideological aspects can be seen in particular in the addition, omission and change of specific expressions which refer to religious or interpersonal aspects. These strategies signal the aim to appeal to wider Arab readers and to fulfil the agendas of different agents (government, companies, chairpersons, directors, etc.). The description of the texts is followed by an account of these aspects in terms of sociopolitical and institutional conditions in the production of the translations. For this explanation, reference is made to sociological approaches to translation, mainly building on the work of Bourdieu (1991). This thesis emphasises that the translation of annual reports is a collective effort which takes place in a particular institutional context. Consequently, the translation strategies are regulated by the objectives of the institution within which translators and other agents operate. The translations are prepared in order to meet the expectations and needs of the intended Arabic language addressees; in addition, the generic features of the reports reveal a progression of transmission and development over the course of time in the spheres of business and economy in Oman. This thesis demonstrates that business companies too can be seen as institutions which contribute significantly to disseminating business terms and concepts and promoting investment opportunities domestically and internationally through translation work.

Web designers, social e-value creation and e-business planning:understanding resistance from conflicting demands

This chapter investigates the conflicting demands faced by web designers in the development of social e-atmospherics that aim to encourage e-value creation, thus strengthening and prolonging market planning strategies. While recent studies have shown that significant shifts are occurring concerning the importance of users’ generated content by way of social e-communication tools (e.g. blogs), these trends are also creating expectations that social and cultural cues ought to become a greater part of e-atmospherics and e-business strategies. Yet, there is growing evidence that organizations are resisting such efforts, fearing that they will lose control of their e-marketing strategy. This chapter contributes to the theory and literature on online cross-cultural understanding and the impact website designers (meso-level) can have on improving the sustainability of e-business planning, departing from recent studies that focus mainly on firms’ e-business plans (macro-level) or final consumers (micro-level). A second contribution is made with respect to online behavior regarding the advancement of technologies that facilitate the development and shaping of new social e-atmospherics that affect users’ behavior and long term e-business strategies through the avoidance of traditional, formal decision making processes and marketing strategy mechanisms implemented by firms. These issues have been highlighted in the literature on the co-production and co-creation of value, which few organizations have thus far integrated in their strategic and pragmatic e-business plans. Drawing upon fifteen online interviews with web designers in the USA, as key non-institutional actors at the meso-level who are developing what future websites will be like, this chapter analyzes ways in which identifying points of resistance and conflicting demands can lead to engagement with the debate over the online co-creation of value and more sustainable future e-business planning. A number of points of resistance to the inclusion of more e-social atmospherics are identified, and the implications for web designers’ roles and web design planning are discussed along with the limitations of the study and potential future research for e-business studies.

Regulation as country-specific (dis-)advantage:smoking bans and the location of foreign direct investment in the tobacco industry

This paper seeks to examine the relationship between smoking bans and the propensity of tobacco firms to engage in foreign direct investment (FDI). Using international business theory based on the firm-specific advantage/country-specific advantage (FSA/CSA) matrix, the authors show that, contrary to what one may expect, smoking bans at home are an important institutional intervention, reducing the propensity for firms to engage in FDI, even to countries without a ban themselves.

The role of law and ethics in developing business management as a profession

Currently, business management is far from being recognised as a profession. This paper suggests that a professional spirit should be developed which could function as a filter of commercial reasoning. Broadly, management will not be organised within the framework of a well-established profession unless formal knowledge, licensing, professional autonomy and professional codes of conduct are developed sufficiently. In developing business management as a profession, law may play a key role. Where the idea is that business management should be more professsionalised, managers must show that they are willing to adopt ethical values, while arriving at business decisions. The paper argues that ethics cannot survive without legal regulation, which, in turn, will not be supported by law unless lawyers can find alternative solutions to the large mechanisms of the official society, secured by the monopolised coercion of the nation state. From a micro perspective of law and business ethics, communities can be developed with their own conventions, rules and standards that are generated and sanctioned within the boundaries of the communities themselves.