Business parks and town centre workplaces in England: a comparative analysis of commuting-related energy consumption

To fully appreciate the environmental impact of a workplace the transport-related carbon dioxide (CO2) emissions resulting from its location should be considered in addition to the emissions that result from the occupation of the building itself. Since the first one was built in the early 1980s, business parks have become a significant workplace location for service-sector workers; a sector of the economy that grew rapidly at that time as the UK manufacturing output declined and the employment base shifted to retail services and de-regulated financial services. This paper examines the transport-related CO2 emissions associated with these workplace locations in comparison to town and city centre locations. Using 2001 Census Special Workplace Statistics which record people’s residence, usual workplace and mode of transport between them, distance travelled and mode of travel were calculated for a sample of city centre and out-of-town office locations. The results reveal the extent of the difference between transport-related CO2 emitted by commuters to out-of-town and city centre locations. The implications that these findings have for monitoring the environmental performance of workplaces are discussed.

The challenge of validation: assessing the performance of a test of productive vocabulary

This paper assesses the performance of a vocabulary test designed to measure second language productive vocabulary knowledge.The test, Lex30, uses a word association task to elicit vocabulary, and uses word frequency data to measure the vocabulary produced. Here we report firstly on the reliability of the test as measured by a test-retest study, a parallel test forms experiment and an internal consistency measure. We then investigate the construct validity of the test by looking at changes in test performance over time, analyses of correlations with scores on similar tests, and comparison of spoken and written test performance. Last, we examine the theoretical bases of the two main test components: eliciting vocabulary and measuring vocabulary. Interpretations of our findings are discussed in the context of test validation research literature. We conclude that the findings reported here present a robust argument for the validity of the test as a research tool, and encourage further investigation of its validity in an instructional context

The Patriarchal Palace at Constantinople in the seventh century: locating the Thomaites and the Makron

New archaeological evidence suggests that the important patriarchal buildings called the Thomaites and Makron were immediately south-west of the sixth-century church of Hagia Sophia, rather than to its north-east as usually supposed. These structures were built in the sixth-century, suggesting only limited rebuilding of the Patriarchate by patriarch Thomas in the early seventh century.

Predicted signatures of pulsed reconnection in ESR data

Early in 1996, the latest of the European incoherent-scatter (EISCAT) radars came into operation on the Svalbard islands. The EISCAT Svalbard Radar (ESR) has been built in order to study the ionosphere in the northern polar cap and in particular, the dayside cusp. Conditions in the upper atmosphere in the cusp region are complex, with magnetosheath plasma cascading freely into the atmosphere along open magnetic field lines as a result of magnetic reconnection at the dayside magnetopause. A model has been developed to predict the effects of pulsed reconnection and the subsequent cusp precipitation in the ionosphere. Using this model we have successfully recreated some of the major features seen in photometer and satellite data within the cusp. In this paper, the work is extended to predict the signatures of pulsed reconnection in ESR data when the radar is pointed along the magnetic field. It is expected that enhancements in both electron concentration and electron temperature will be observed. Whether these enhancements are continuous in time or occur as a series of separate events is shown to depend critically on where the open/closed field-line boundary is with respect to the radar. This is shown to be particularly true when reconnection pulses are superposed on a steady background rate.

Reverse knowledge transfer: evidence from General Motors in the UK and Poland

This paper explores the concept of a reverse diffusion of knowledge, that is, the transfer flowing from a company’s subsidiary to its home plant. The article presents the empirical evidence gathered in General Motors UK and Poland, where the reverse diffusion of a concept of the built-in quality took place. Lastly, the implications of our findings for future research are discussed.

Resilience in crisis reconsidered: the need for values against relativist ethics

The need for a reconsideration of resilience from both a positive and a normative point of view can be discussed using some of the lessons and conclusions drawn from individual resilience studied by psychologists in an educational context. The main point made in this article is that unless we want to approach resilience as a feature which is exogenously given in each population and society and whose dynamics, if any, are not subject to deliberate actions and policies, we need a framework for the evaluation of resilience as a social good. Relying on the hope that resilience is necessarily built in our societies as a force guaranteeing convergence to a socially desirable point of social evolution may be too optimistic and even counterproductive, because it may lead us to an inefficient or biased political and regulatory decision making. When the effect of policies and actions at a national or international level take into account the dynamic effect of such actions on resilience itself, one cannot blindly rely on the goodness of the process any more. This is mainly because resilience is not uniformly embodied in all societies and it does not have a globally positive social value by itself. The issue of socially valuing the options available beyond market-price valuations becomes fundamental in this context.

Induced seismicity in the Castarthao reservoir, NE Brazil - Preliminary results

The Castanhao reservoir was built in the state of Ceara, a dry region in Northeastern Brazil, to regulate the flow of the Jaguaribe River, for irrigation, and for power generation. It is an earth-filled dam, 60 m high, with a water capacity of 4.5 x 10(9) m(3). The seismicity in the area has been monitored since 1998, with a few interruptions, using one analog or one digital station and, during a few periods, a three-station network. The first earthquakes likely to be induced events were detected in 2003, when the water level was about 20 in high. In early 2004 a very heavy rainfall season quickly filled the reservoir. Shortly after, an increase in the seismic activity occurred and many micro-earthquakes were recorded. We suggest that this activity resulted from an increase in pore pressure due to undrained response. Therefore, we may classify this cluster of microearthquakes as ""initial seismicity."" We deployed a network with four analog stations in the area, following this activity, to determine the epicentral zone. At least three epicentral areas under the reservoir were detected. The spatio-temporal analysis of the available data revealed that the seismicity occurs in clusters and that these were activated at different periods. We identified four sets of faults (N-S-, E-W-, NW-SE-, and NE-SW-oriented), some of which moved in shallow crustal levels and as recently as the Quaternary (1.8 Ma). Under the present-day stress regime, the last two sets moved as strike-slip structures. We suggest a possible correlation between dormant faults and the observed induced seismicity. (c) 2008 Elsevier B.V. All rights reserved.

Application of abrupt cut-off models in the analysis of the capacitance spectra of conjugated polymer devices

In this paper, a detailed study of the capacitance spectra obtained from Au/doped-polyaniline/Al structures in the frequency domain (0.05 Hz-10 MHz), and at different temperatures (150-340 K) is carried out. The capacitance spectra behavior in semiconductors can be appropriately described by using abrupt cut-off models, since they assume that the electronic gap states that can follow the ac modulation have response times varying rapidly with a certain abscissa, which is dependent on both temperature and frequency. Two models based on the abrupt cut-off concept, formerly developed to describe inorganic semiconductor devices, have been used to analyze the capacitance spectra of devices based on doped polyaniline (PANI), which is a well-known polymeric semiconductor with innumerous potential technological applications. The application of these models allowed the determination of significant parameters, such as Debye length (approximate to 20 nm), position of bulk Fermi level (approximate to 320 meV) and associated density of states (approximate to 2x10(18) eV(-1) cm(-3)), width of the space charge region (approximate to 70 nm), built-in potential (approximate to 780 meV), and the gap states` distribution.

En beskrivning av manuellt test : Svagheter och styrkor med och utan stöd avett testverktyg

Test is an area in system development. Test can be performed manually or automated. Test activities can be supported by Word documents and Excel sheets for documenting and executing test cases and as well for follow up, but there are also new test tools designed to support and facilitate the testing process and the activities of the test. This study has described manual test and identified strengths and weaknesses of manual testing with a testing tool called Microsoft Test Manager (MTM) and of manual testing using test cases and test log templates developed by the testers at Sogeti. The result that emerged from the problem and strength analysis and the analysis of literature studies and firsthand experiences (in terms of creating, documenting and executing test cases) addresses the issue of the following weaknesses and strengths. Strengths of the test tool is that it contains needed functionality all in one place and it is available when needed without having to open up other programs which saves many steps of activity. Strengths with test without the support of test tools is mainly that it is easy to learn and gives a good overview, easy to format text as desired and flexible to changes during execution of a test case. Weaknesses in test with the support of test tools include that it is difficult to get a good overview of the entire test case, that it is not possible to format the text in the test steps. It is as well not possible to modify the test steps during execution. It is also difficult to use some of the test design techniques of TMap, for example a checklist, when using the test tool MTM. Weaknesses with test without the support of the testing tool MTM is that the tester gets many more steps of activities to do compared to doing the same activities with the support of the testing tool MTM. There is more to remember because the documents the tester use are not directly linked. Altogether the strengths of the test tool stands out when it comes to supporting the testing process.

Current and future shopping conditions in Sälen

Going from having bought the most essential at the small shops close to home, better communications and an increasingly consumption oriented lifestyle has created a change in shopping behavior and has led to phenomenon such as shopping centres and more. These are constantly being built in Sweden: in the cities, outside the cities and more recently even in small cities -small cities as for one reason or another have access to a larger customer base which can have businesses to flourish economically. During the first decade of the 21st century, shopping centres have been established along the Swedish/Norwegian border. Since the Norwegian Krone is much stronger than the Swedish Krona Norwegians save a great deal of money on going to Sweden to shop. During the shopping trips to Sweden, it is mostly alcohol, meat, tobacco and candy that are being bought. However, other products such as clothing, technology, household appliances and more are also being purchased, all to save money on the trip. Together these cross border shoppers spent 11, 6 billion in Sweden during the year of 2010. This gives an average spending of approximately 10 900 SEK per cross border shopper on annual basis. Nordby, Töcksfors and Charlottenberg (small cities located in southwestern Sweden) are places characterized by Norwegian cross border shopping. Together, they generate billions every year and this only seems to increase. These places are relatively small in size but have prominent attributes such as proximity to the Norwegian border. Apart from these resorts and shopping centres, there are few or none similar places near the Norwegian border in the rest of Sweden. However, a place which is geographically well located and has a relatively large Norwegian and Swedish customer base is the ski resort of Sälen in west central of Sweden. Sälen is a village located near the Norwegian border, although fairly sparsely populated. The destination has annually about one million official guest nights, based on the 414 000 visitors who stay an average of about 4, 5 days.  Per visit, these tourists individually spend an average of 862 SEK on shopping at the destination. The expenditure of the mountain tourists together with the Norwegian border shoppers makes it very interesting to explore the opportunities for shopping development in terms of a shopping centre in the region of Sälen.

Electricity Supply Solutions for an Educational Center in Tanzania

The aim of this study was to investigate electricity supply solutions for an educationalcenter that is being built in Chonyonyo Tanzania. Off-grid power generation solutions andfurther optimization possibilities were studied for the case.The study was done for Engineers Without Borders in Sweden. Who are working withMavuno Project on the educational center. The school is set to start operating in year 2015with 40 girl students in the beginning. The educational center will help to improve genderequality by offering high quality education in a safe environment for girls in rural area.It is important for the system to be economically and environmentally sustainable. Thearea has great potential for photovoltaic power generation. Thus PV was considered as theprimary power generation and a diesel generator as a reliable backup. The system sizeoptimization was done with HOMER. For the simulations HOMER required componentdata, weather data and load data. Common components were chose with standardproperties, the loads were based on load estimations from year 2011 and the weather datawas acquired from NASA database. The system size optimization result for this base casewas a system with 26 kW PW; 5.5 kW diesel generator, 15 kW converter and 112 T-105batteries. The initial cost of the system was 55 875 €, the total net present cost 92 121 €and the levelized cost of electricity 0.264 €/kWh.In addition three optimization possibilities were studied. First it was studied how thesystem should be designed and how it would affect the system size to have night loads(security lights) use DC and could the system then be extended in blocks. As a result it wasfound out that the system size could be decreased as the inverter losses would be avoided.Also the system extension in blocks was found to be possible. The second study was aboutinverter stacking where multiple inverters can work as one unit. This type of connectionallows only the required number of inverters to run while shutting down the excess ones.This would allow the converter-unit to run with higher efficiency and lower powerconsumption could be achieved. In future with higher loads the system could be easilyextendable by connecting more inverters either in parallel or series depending on what isneeded. Multiple inverters would also offer higher reliability than using one centralizedinverter. The third study examined how the choice of location for a centralized powergeneration affects the cable sizing for the system. As a result it was found that centralizedpower generation should be located close to high loads in order to avoid long runs of thickcables. Future loads should also be considered when choosing the location. For theeducational center the potential locations for centralized power generation were found outto be close to the school buildings and close to the dormitories.

Thermal losses in sealed, gas-filled flat plate solar collectors

A sealed space between absorber and cover glass makes it possible reducing the influence of humidity condensate and dust at the same time as the enclosed space can be filled with a suitable gas for lowering the losses. This paper is about the size of the losses in these collectors. A calculating model of a gas-filled flat plate solar collector was built in Matlab with standard heat transfer formulas. It showed that the total loss can be reduced up to 20% when changing to an inert gas. It is also possible using a much shorter distance and still achieve low losses at the same time as the mechanical stresses in the material is reduce.

Evolutionary Testing of Autonomous Software Agents

A system built in terms of autonomous agents may require even greater correctness assurance than one which is merely reacting to the immediate control of its users. Agents make substantial decisions for themselves, so thorough testing is an important consideration. However, autonomy also makes testing harder; by their nature, autonomous agents may react in different ways to the same inputs over time, because, for instance they have changeable goals and knowledge. For this reason, we argue that testing of autonomous agents requires a procedure that caters for a wide range of test case contexts, and that can search for the most demanding of these test cases, even when they are not apparent to the agents’ developers. In this paper, we address this problem, introducing and evaluating an approach to testing autonomous agents that uses evolutionary optimization to generate demanding test cases.

Reflexões sobre a utilização do balanced scorecard na gestão da cadeia de suprimentos: um estudo de caso na unidade operacional de uma grande distribuidora de combustíveis

As organizações contemporâneas apresentam elevado grau de complexidade. A extensa cadeia de processos deve ser gerenciada de forma integrada e requer descentralização da tomada de decisões para assegurar respostas ágeis aos estímulos do ambiente competitivo. Este contexto demanda a criação de ferramentas de gestão que apoiem os gestores no atingimento dos objetivos estratégicos globais das empresas, como o modelo de referência analisado neste trabalho, que alia as métricas de gestão da cadeia de suprimentos com o conceito do Balanced Scorecard. Este trabalho objetivou, por um lado, avaliar a atual arquitetura de indicadores de desempenho da unidade operacional (UO) de uma grande distribuidora de combustíveis à luz deste modelo de referência e, por outro, testar o modelo de referência através do estudo de caso quanto à sua universalidade de aplicação por diferentes empresas. Dentre os resultados obtidos, destacam-se: a arquitetura de indicadores atual da UO está desequilibrada nas dimensões do BSC – comparada à dimensão financeira que apresenta 7 indicadores, a dimensão clientes apresenta somente 2 indicadores; identificou-se uma lacuna de 50% na relação de indicadores de desempenho da UO quando a confrontamos com o modelo de referência; para as lacunas identificadas, desenvolveu-se um plano de ação para sua incorporação à arquitetura da UO; constatou-se que 24% das métricas do modelo de referência não se aplicam à realidade da UO e; o modelo de referência não abarca itens relevantes como treinamento, engajamento e Saúde, Meio Ambiente e Segurança (SMS), primordial para a realidade da empresa, que acompanha atualmente 6 indicadores de SMS. Verificou-se, também, que o uso de um modelo de referência genérico não é o mais adequado por causa das complexidades intrínsecas de cada uma das organizações. Entretanto, o mesmo pode ser usado como um guia para verificação de suficiência dos indicadores pré-selecionados por uma determinada empresa porque indica lacunas que podem não ser percebidas no processo de seleção.

Fundos de investimento imobiliário no Brasil: as características que explicam o desempenho

O objetivo deste trabalho é ajudar o investidor que optou por investir seus recursos no mercado imobiliário a tomar sua decisão de investimento com base nas características endógenas facilmente identificáveis no prospecto dos Fundos de Investimento Imobiliários (FIIs). Foram selecionadas aquelas consideradas importantes pela literatura e foram construídos alguns modelos para testar sua influência na rentabilidade. Inicialmente, foi construído um modelo completo, com todas as variáveis, que apresentou resultados pouco relevantes, já que a maioria das variáveis não apresentou significância. Em seguida, um modelo reduzido foi montado com as variáveis que mais contribuíam para a rentabilidade, obtendo-se resultados relevantes. Através desse modelo, observou-se que FIIs que investem em desenvolvimento imobiliário, com foco no mercado residencial e com baixas taxas de administração, geraram maiores rentabilidades ao investidor.