Sustainability and economic evaluation of microalgae grown in brewery wastewater

This article evaluates the sustainability and economic potential of microalgae grown in brewery wastewater for biodiesel and biomass production. Three sustainability and two economic indicators were considered in the evaluation within a life cycle perspective. For the production system the most efficient process units were selected. Results show that harvesting and oil separation are the main process bottlenecks. Microalgae with higher lipid content and productivity are desirable for biodiesel production, although comparable to other biofuel’s feedstock concerning sustainability. However, improvements are still needed to reach the performance level of fossil diesel. Profitability reaches a limit for larger cultivation areas, being higher when extracted biomass is sold together with microalgae oil, in which case the influence of lipid content and areal productivity is smaller. The values of oil and/or biomass prices calculated to ensure that the process is economically sound are still very high compared with other fuel options, especially biodiesel.

Phylogénie moléculaire du genre Salix L. (Salicaceae) en Amérique du Nord

La culture de saules (Salix sp.) est une pratique courante en Europe et en Amérique du Nord pour produire de la biomasse végétale. Cependant, le développement d’outils moléculaires est très récent. De plus, la phylogénie des saules est incomplète. Il y a un manque d’information pour les programmes de sélection d'espèces indigènes et pour la compréhension de l’évolution du genre. Le genre Salix inclut 500 espèces réparties principalement dans les régions tempérées et boréo-arctique de l’hémisphère nord. Nous avons obtenu l’ensemble des espèces retrouvées naturellement en Amérique (121 indigènes et introduites). Dans un premier temps, nous avons développé de nouveaux outils moléculaires et méthodes : extraction d’ADN, marqueurs microsatellites et gènes nucléaires. Puis, nous avons séquencé deux gènes chloroplastiques (matK et rbcL) et la région ITS. Les analyses phylogénétiques ont été réalisées selon trois approches : parcimonie, maximum de vraisemblance et Bayésienne. L’arbre d’espèces obtenu a un fort support et divise le genre Salix en deux sous-genres, Salix et Vetrix. Seize espèces ont une position ambiguë. La diversité génétique du sous-genre Vetrix est plus faible. Une phylogénie moléculaire complète a été établie pour les espèces américaines. D’autres analyses et marqueurs sont nécessaires pour déterminer les relations phylogénétiques entre certaines espèces. Nous affirmons que le genre Salix est divisé en deux clades.

Analyse de l'effet de la contamination du sol sur la croissance et la physiologie de 11 cultivars de Salix

Mon mémoire de maîtrise a été réalisé dans le cadre du projet Génorem (www.genorem.ca), un projet multidisciplinaire qui réunit différents chercheurs de l'Université de Montréal et de l'Université McGill dans le but d'améliorer les techniques utilisées en bioremédiation. Dans le cadre de l'étude, des saules à croissance rapide (Salix sp.) ont été utilisés comme plantes modèles dans l'étude. Ainsi, 11 cultivars de saule ont été suivis afin de déterminer leur potentiel à produire un bon rendement de biomasse, à tolérer des conditions de stress sévère causé par la présence de HAPs (hydrocarbures aromatiques polycycliques) , BPCs (biphényles polychlorés) et d'hydrocarbures pétroliers C10-C50. L'expérimentation consistait en une plantation de saule à forte densité qui a été mise en place en 2011 sur le site d'une ancienne industrie de pétrochimie à Varennes, dans le sud du Québec. Les boutures des génotypes sélectionnés ont été plantées sur une superficie d'environ 5000 m2. Les plantes ont été suivies pendant les deux saisons de croissance suivant le recépage et une série de paramètres de croissance et de mesures physiologiques ont été récoltés (surface foliaire, taux de chlorophylle, conductance stomatique et statut nutritionnel) dans le but d'évaluer et de comparer les performances de chaque génotype sur un sol pollué. Les analyses statistiques ont démontré que le cultivar S. miyabeana (SX61) était le meilleur producteur de biomasse sur le site contaminé, tandis que S. nigra (S05) et S. acutifolia (S54) présentaient la meilleure capacité photosynthétique. S. dasyclados (SV1), S. purpurea (‘Fish Creek’) et S. caprea (S365) ont semblé particulièrement affectés par la présence de contaminants. La capacité d'établissement et la croissance de S. nigra (S05), S. eriocephala (S25) and S. purpurea x S. miyabeana (‘Millbrook’) indiquent une tolérance globale supérieure à la pollution . Cette analyse comparative des différentes réponses physiologiques des saules cultivés sur un sol contaminé pourra guider le processus de sélection de plantes et les techniques de bioremédiation dans les futurs projets de phytoremédiation.

Séquestration du carbone atmosphérique dans la biomasse racinaire de plantations de saules

Le cycle du carbone (C) est, depuis la révolution industrielle, déstabilisé par l’introduction dans l’atmosphère de C autrefois fossilisé. Certaines mesures de mitigation prometteuses impliquent la séquestration accrue du CO2 atmosphérique dans les sols via le développement du réseau racinaire des arbres. Ce projet de recherche visait à : 1) quantifier la biomasse racinaire ligneuse produite annuellement par unité de surface par le Salix miyabeana cultivé en régie intensive à courtes rotations, 2) doser la concentration en C et en N des racines de saule en fonction de leur profondeur et de leur diamètre et 3) déterminer l’influence des propriétés pédoclimatiques du milieu sur la séquestration du carbone organique (Corg) par les racines. Pour y arriver, six souches de saules ont été excavées à partir de huit sites (n=48) et neuf carottes de recolonisation ont été implantées à cinq sites (n=45) pour évaluer la productivité racinaire fine. Les échantillons séchés ont été pesés pour quantifier la biomasse racinaire produite, et ont été analysés pour le C et le N. La productivité en biomasse racinaire ligneuse du saule en plantation pour tout le réseau d'échantillonnage varie de 0,7 – 1,8 Mg/ha/an. La proportion de C dans la biomasse racinaire s’étend de 31,3% à 50,4% et sa variance dans les tissus est expliquée par le diamètre racinaire et par les conditions environnementales des sites de provenance. Les conditions climatiques constituent la principale influence sur la production de biomasse racinaire. La variance de la biomasse racinaire est significativement contrôlée (p :0,004) par la quantité de précipitation de l’été et de l’année qui contrôlent ensemble 83,4 % du r2 ajusté. La précipitation de l’été est inversement liée à la productivité racinaire puisque les protéines expansines des racines sont stimulées par les carences hydriques du sol. La production de racines fines des plantations (1,2 à 2,4 Mg/ha/an) est, elle, plus fortement contrôlée par les conditions pédologiques du site qui expliquent 36,5% de la variance de productivité des racines fines contre 37,5% de la variance expliquée par les facteurs pédoclimatiques. Le P et le N du sol ont des rôles prépondérants sur la production de racines fines. Une disponibilité en P accrue dans le sol stimule la biomasse racinaire fine alors qu’une quantité supérieure de N dans le sol limite la croissance racinaire tout en favorisant la croissance des parties aériennes de la plante. Ce projet a permis d’améliorer notre compréhension des conditions pédologiques et climatiques qui engendrent, au Québec méridional, une productivité et une séquestration en Corg accrue dans le réseau racinaire du saule.

Studies on the effect of selected metals on the productivity of two species of algae

The thesis embodies the results of a study on the variations in the parameters of productivity of two test species, a chlorophycean alga and a diatom. The chlorophycean alga Scenedesmus abundans was isolated from a fresh water pond whereas the diatom Nitzschia clausii was from the Cochin backwaters. Their growth parameters and their variations due to the effect of addition of some heavy metals have been studied. The growth parameters include biomass, production, respiration, photosynthetic pigments and end products of photosynthesis. The cell numbers were estimated by using a haemocytometer and production and respiration by oxygen light and dark technique. Spectrophotometric analysis for pigments, anthrone method for carbohydrate and heated biuret method for protein were the different methods employed in the present investigation. The present study is confined to nickel, cobalt, trivalent and hexavalent chromium. Different metals are discharged from various industries in and around Cochin. The effects of these metals individually and in combination are studied. Experiments to determine the effects of interaction of metals in combination enabled the assessment of the antagonistic and synergistic effect of metals on test species. The concentration or accumulation of metals on algae was determined by Atomic Absorption Spectrophotometry. The thesis has been divided into seven chapters. The introductory chapter explains the relevance of the present investigation. Chapter two presents the review of literature based on the work in relation to toxicity. Third chapter gives a detailed description of the material and specialized methods followed for the study. The effects of various metals selected for study - nickel, cobalt, trivalent and hexavalent chromium on the qualitative and quantitative aspects of productivity forms the subject of matter of the fourth chapter. The fifth chapter gives the impact of metals in combination on two species of algae. A general discussion and summary are included in the sixth and seventh chapters

Some observations on the ecology and biochemical aspects of the seaweeds of Kerala coast

In the present thesis , observations on the ecology of seaweed flora of Kerala, their distribution and zonation pattern, monthly/seasonal density of seaweeds at each station, frequency of occurrence, standing crop, monthly/seasonal/place-wise data on physico—chemical characters of ambient waters at the stations and their influence on seaweed density have been made. This data will help us in the farming of economically important seaweeds, by providing information on the ideal conditions of seaweed biomass production. Biochemical observations on protein, carbohydrate and lipid contents of different species of nutritive value. Seaweeds with high content of proteins, carbohydrates and lipids can be recommended for food and feed formulations after subjecting them to toxicological studies. The study on monthly/seasonal/placewise variation in biochemical composition of seaweeds will provide necessary information on the appropriate time and place of harvesting the algal species for exploiting its constituents .

Significance of soil microorganisms with special reference to climate change

There are a large number of agronomic-ecological interactions that occur in a world with increasing levels of CO2, higher temperatures and a more variable climate. Climate change and the associated severe problems will alter soil microbial populations and diversity. Soils supply many atmospheric green house gases by performing as sources or sinks. The most important of these gases include CH4, CO2 and N2O. Most of the green house gases production and consumption processes in soil are probably due to microorganisms. There is strong inquisitiveness to store carbon (C) in soils to balance global climate change. Microorganisms are vital to C sequestration by mediating putrefaction and controlling the paneling of plant residue-C between CO2 respiration losses or storage in semi-permanent soil-C pools. Microbial population groups and utility can be manipulated or distorted in the course of disturbance and C inputs to either support or edge the retention of C. Fungi play a significant role in decomposition and appear to produce organic matter that is more recalcitrant and favor long-term C storage and thus are key functional group to focus on in developing C sequestration systems. Plant residue chemistry can influence microbial communities and C loss or flow into soil C pools. Therefore, as research takings to maximize C sequestration for agricultural and forest ecosystems - moreover plant biomass production, similar studies should be conducted on microbial communities that considers the environmental situations

The protective and attractive covering of a vegetated embankment using coir geotextiles

This paper presents the results of a field experiment conducted in Kerala, South India, to test the effectiveness of coir geotextiles for embankment protection. The results reveal that treatment with geotextile in combination with grass is an effective eco-hydrological measure to protect steep slopes from erosion. In the context of sustainable watershed management, coir is a cheap and locally available material that can be used to strengthen traditional earthen bunds or protect the banks of village ponds from erosion. Particularly in developing countries, where coir is abundantly available and textiles can be produced by small-scale industry, this is an attractive alternative for conventional methods. This paper analyses the performance of coir geotextile in different treatments with respect to soil moisture content, protection against erosion and biomass production

Interactive comment on “Experimental study using coir geotextiles in watershed management

This paper presents the results of a field experiment conducted in Kerala, South India, to test the effectiveness of coir geotextiles for embankment protection. The results reveal that treatment with geotextile in combination with grass is an effective eco-hydrological measure to protect steep slopes from erosion. In the context of sustainable watershed management, coir is a cheap and locally available material that can be used to strengthen traditional earthen bunds or protect the banks of village ponds from erosion. Particularly in developing countries, where coir is abundantly available and textiles can be produced by small-scale industry, this is an attractive alternative for conventional methods. The paper analyses the performance of different treatments with regard to soil moisture content, protection against erosion and biomass production

Decent work?

Pastoralism and ranching are two different rangeland-based livestock systems in dryland areas of East Africa. Both usually operate under low and irregular rainfall and consequently low overall primary biomass production of high spatial and temporal heterogeneity. Both are usually located far from town centres, market outlets and communication, medical, educational, banking, insurance and other infrastructure. Whereas pastoralists can be regarded as self-employed, gaining their livelihood from managing their individually owned livestock on communal land, ranches mostly employ herders as wage labourers to manage the livestock owned by the ranch on the ranches’ own land property. Both production systems can be similarly labour intensive and – with regard to the livestock management – require the same type of work, whether carried out as self-employed pastoralist or as employed herder on a work contract. Given this similarity, the aim of this study was to comparatively assess how pastoralists and employed herders in northern Kenya view their working conditions, and which criteria they use to assess hardship and rewards in their daily work and their working life. Their own perception is compared with the concept of Decent Work developed by the International Labour Organisation (ILO). Samburu pastoralists in Marsabit and Samburu Districts as well as herders on ranches in Laikipia District were interviewed. A qualitative analysis of 47 semi-structured interviews yielded information about daily activities, income, free time, education and social security. Five out of 22 open interviews with pastoralists and seven out of 13 open interviews with employed herders fully transcribed and subjected to qualitative content analysis to yield life stories of 12 informants. Pastoralists consider it important to have healthy and satisfied animals. The ability to provide food for their family especially for the children has a high priority. Hardships for the pastoralists are, if activities are exhausting, and challenging, and dangerous. For employed herders, decent conditions are if their wages are high enough to be able to provide food for their family and formal education for their children. It is further most important for them to do work they are experienced and skilled in. Most employed herders were former pastoralists, who had lost their animals due to drought or raids. There are parallels between the ILO ‘Decent Work’ concept and the perception of working conditions of pastoralists and employed herders. These are, for example, that remuneration is of importance and the appreciation by either the employer or the community is desired. Some aspects that are seen as important by the ILO such as safety at work and healthy working conditions only play a secondary role to the pastoralists, who see risky and dangerous tasks as inherent characteristics of their efforts to gain a livelihood in their living environment.

Availability of heavy metals for uptake by Salix viminalis on a moderately contaminated dredged sediment disposal site

Extractability of Cd. Cr, Cu, Ni, Pb, and Zn in a dredged sediment disposal site was assessed using single extraction Procedures (H2O; 0.01 M CaCl2; 1 M NH4OAc NH4OAc-EDTA. CaCl2-TEA-DTPA). Only Cd and Zn were Found to exceed statutory threshold values for total content. The field was planted with Salix viminalis "Orm" and accumulation of heavy metals in bark, leaves, roots, and wood was evaluated at seven sampling locations along an observed gradient in texture and pollution. Biomass production was high, ranging from 13.2 to 17.8 t ha(1) y(1) dry weight. Metal accumulation in aboveground Plant parts Was low. amounting to the following annually extracted mass or metals per ha: 5034 g Zn, 83 g Cd. W g Cu. 83 g Pb, 12 g Ni and 6 g Cr. The use of accumulating clones and the use of soil amendments might enhance extraction efficiency in future research. (C) 2005 Elsevier Ltd. All rights reserved.

Effects of biosolids from tomato processing on soil fertility and wheat growth in a Greek alfisol

The effects of biosolids from tomato processing on soil properties and wheat growth were investigated in an Alfisol from central Greece. Biosolids were mixed with soil from the surface (Ap) or subsurface (Bt) horizon in plastic containers at rates of 1%, 5%, and 10% by dry weight (d.w.; equivalent to 10, 50, and 100 Mg ha–1). Biosolid treatments were compared to an NH4Cl application (50 mg N kg–1) and an untreated control in (1) a 102 d incubation experiment at 28°C to determine biosolid nitrification potential and (2) a 45 d outdoor experiment to evaluate effects on soil fertility and wheat growth. Mineralization of biosolids in the incubation experiment resulted in accumulation of nitrate-N and indicated that biosolids were able to supply N that was in excess of crop needs in treatments of 5% and 10%. After 45 d of wheat growth, available soil nutrients (N, P) and P uptake by wheat were distinctly lower in the Bt than in the Ap horizon. However, soil pH, electrical conductivity, organic matter, total N, nitrate-N, extractable P, and exchangeable K increased with increasing rate of biosolid application in both soils. These were followed by corresponding increases in wheat nutrient uptake and biomass production, thus demonstrating the importance of this organic material for sustaining production in soils of low immediate fertility. Compared to the NH4Cl treatment (50 kg N ha–1 equivalent), biosolid application rates of 5% and 10% had higher available soil nutrients, similar or higher nutrient uptake and higher wheat biomass. But only an application of 10% biosolids provided sufficient N levels for wheat in the surface soil, and even higher applications were required for providing sufficient N and P in the Bt horizon.

Predicting feed quality - chemical analysis and in vitro evaluation

As the ideal method of assessing the nutritive value of a feedstuff, namely offering it to the appropriate class of animal and recording the production response obtained, is neither practical nor cost effective a range of feed evaluation techniques have been developed. Each of these balances some degree of compromise with the practical situation against data generation. However, due to the impact of animal-feed interactions over and above that of feed composition, the target animal remains the ultimate arbitrator of nutritional value. In this review current in vitro feed evaluation techniques are examined according to the degree of animal-feed interaction. Chemical analysis provides absolute values and therefore differs from the majority of in vitro methods that simply rank feeds. However, with no host animal involvement, estimates of nutritional value are inferred by statistical association. In addition given the costs involved, the practical value of many analyses conducted should be reviewed. The in sacco technique has made a substantial contribution to both understanding rumen microbial degradative processes and the rapid evaluation of feeds, especially in developing countries. However, the numerous shortfalls of the technique, common to many in vitro methods, the desire to eliminate the use of surgically modified animals for routine feed evaluation, paralleled with improvements in in vitro techniques, will see this technique increasingly replaced. The majority of in vitro systems use substrate disappearance to assess degradation, however, this provides no information regarding the quantity of derived end-products available to the host animal. As measurement of volatile fatty acids or microbial biomass production greatly increases analytical costs, fermentation gas release, a simple and non-destructive measurement, has been used as an alternative. However, as gas release alone is of little use, gas-based systems, where both degradation and fermentation gas release are measured simultaneously, are attracting considerable interest. Alternative microbial inocula are being considered, as is the potential of using multi-enzyme systems to examine degradation dynamics. It is concluded that while chemical analysis will continue to form an indispensable part of feed evaluation, enhanced use will be made of increasingly complex in vitro systems. It is vital, however, the function and limitations of each methodology are fully understood and that the temptation to over-interpret the data is avoided so as to draw the appropriate conclusions. With careful selection and correct application in vitro systems offer powerful research tools with which to evaluate feedstuffs. (C) 2003 Elsevier B.V. All rights reserved.

Bio-energy retains its mitigation potential under elevated CO2

Background If biofuels are to be a viable substitute for fossil fuels, it is essential that they retain their potential to mitigate climate change under future atmospheric conditions. Elevated atmospheric CO2 concentration [CO2] stimulates plant biomass production; however, the beneficial effects of increased production may be offset by higher energy costs in crop management. Methodology/Main findings We maintained full size poplar short rotation coppice (SRC) systems under both current ambient and future elevated [CO2] (550 ppm) and estimated their net energy and greenhouse gas balance. We show that a poplar SRC system is energy efficient and produces more energy than required for coppice management. Even more, elevated [CO2] will increase the net energy production and greenhouse gas balance of a SRC system with 18%. Managing the trees in shorter rotation cycles (i.e. 2 year cycles instead of 3 year cycles) will further enhance the benefits from elevated [CO2] on both the net energy and greenhouse gas balance. Conclusions/significance Adapting coppice management to the future atmospheric [CO2] is necessary to fully benefit from the climate mitigation potential of bio-energy systems. Further, a future increase in potential biomass production due to elevated [CO2] outweighs the increased production costs resulting in a northward extension of the area where SRC is greenhouse gas neutral. Currently, the main part of the European terrestrial carbon sink is found in forest biomass and attributed to harvesting less than the annual growth in wood. Because SRC is intensively managed, with a higher turnover in wood production than conventional forest, northward expansion of SRC is likely to erode the European terrestrial carbon sink.

The ecology of lizard reproductive output

Aim  We provide a new quantitative analysis of lizard reproductive ecology. Comparative studies of lizard reproduction to date have usually considered life-history components separately. Instead, we examine the rate of production (productivity hereafter) calculated as the total mass of offspring produced in a year. We test whether productivity is influenced by proxies of adult mortality rates such as insularity and fossorial habits, by measures of temperature such as environmental and body temperatures, mode of reproduction and activity times, and by environmental productivity and diet. We further examine whether low productivity is linked to high extinction risk. Location  World-wide. Methods  We assembled a database containing 551 lizard species, their phylogenetic relationships and multiple life history and ecological variables from the literature. We use phylogenetically informed statistical models to estimate the factors related to lizard productivity. Results  Some, but not all, predictions of metabolic and life-history theories are supported. When analysed separately, clutch size, relative clutch mass and brood frequency are poorly correlated with body mass, but their product – productivity – is well correlated with mass. The allometry of productivity scales similarly to metabolic rate, suggesting that a constant fraction of assimilated energy is allocated to production irrespective of body size. Island species were less productive than continental species. Mass-specific productivity was positively correlated with environmental temperature, but not with body temperature. Viviparous lizards were less productive than egg-laying species. Diet and primary productivity were not associated with productivity in any model. Other effects, including lower productivity of fossorial, nocturnal and active foraging species were confounded with phylogeny. Productivity was not lower in species at risk of extinction. Main conclusions  Our analyses show the value of focusing on the rate of annual biomass production (productivity), and generally supported associations between productivity and environmental temperature, factors that affect mortality and the number of broods a lizard can produce in a year, but not with measures of body temperature, environmental productivity or diet.