Journal of Architecture and Urbanism - Rethinking Le Corbusier: Urban Design and History

This is much more than a mere compilation of texts about Corbusian architecture. The articles gathered here focus on Le Corbusier’s reflections about the public space of earlier times and its influence upon his own output, the relationship of his designs with the pre-existing city, and other subjects drawn from all periods of his career and training that clarify the affinity that he established with the past through urban design. They are very heterogeneous, pointing off in different directions and marking the most diverse interests. But at the same time they are interconnected, in that they seek to shed light on the affinity that Le Corbusier established with the past from the point of view of urban design, and open up new perspectives about the public space in his work and its controversial relationship with history. This special issue thus bears witness once again to Le Corbusier’s inexhaustible legacy, but also to the usefulness of research on his work and thought – a subject about which it seemed that everything had already been said when, paradoxically, we now know that there is still almost everything left to say.

Experimental infection of capybaras Hydrochoerus hydrochaeris by Rickettsia rickettsii and evaluation of the transmission of the infection to ticks Amblyomma cajennense

The present study evaluated the infection of capybaras (Hydrochoerus hydrochaeris) by Rickettsia rickettsii and their role as amplifier hosts for horizontal transmission of R. rickettsii to Amblyomma cajennense ticks. Two groups of two capybaras each were evaluated: on day 0, group 1 (G1) was infested by R. rickettsii-infected ticks, and group 2 (G2) was inoculated intraperitoneally with R. rickettsii. Two additional groups were control groups, not exposed to R. rickettsii, being CG1 group the control of G1, and CG2 group the control of G2. Capybara rectal temperature was measured daily. Blood samples were collected every 3 days during 30 days, and used to (i) inoculate guinea pigs intraperitoneally; (ii) DNA extraction followed by real-time PCR targeting the rickettsial gene gltA; (iii) hematology; (iv) detection of R. rickettsii-reactive antibodies by indirect immunofluorescence assay (IFA). Blood was also collected from G I capybaras every approximate to 10-30 days till the 146th day, to be tested by serology. Capybaras were infested by uninfected A. cajennense nymphs from the 3rd to the 18th day. Engorged nymphs were collected, allowed to molt to adults in an incubator. Thereafter, the subsequent flat ticks were tested by PCR. All G1 and G2 capybaras became infected by R. rickettsii, as demonstrated by guinea pig inoculation and seroconversion, but they showed no fever. Rickettsemia was continually detected from the 6th (G2 capybaras) or 9th (G1 capybaras) to the 18th day post inoculation or infestation with R. rickettsii-infected ticks. A total of 20-25% and 30-35% of the flat ticks previously fed on G1 and G2 capybaras, respectively, became infected by R. rickettsii. The study demonstrated that R. rickettsii was capable to infect capybaras without causing clinical illness, inducing rickettsemia capable to cause infection in guinea pigs and ticks. Our results indicate that capybaras act as amplifier host of R. rickettsii for A. cajennense ticks in Brazil. (c) 2008 Elsevier B.V. All rights reserved.

Adolescents' perceptions of social status: Development and evaluation of a new indicator

Objective. Eliminating health disparities, including those that are a result of socioeconomic status (SES), is one of the overarching goals of Healthy People 2010. This article reports on the development of a new, adolescent-specific measure of subjective social status (SSS) and on initial exploratory analyses of the relationship of SSS to adolescents' physical and psychological health. Methods. A cross-sectional study of 10 843 adolescents and a subsample of 166 paired adolescent/mother dyads who participated in the Growing Up Today Study was conducted. The newly developed MacArthur Scale of Subjective Social Status (10-point scale) was used to measure SSS. Paternal education was the measure of SES. Indicators of psychological and physical health included depressive symptoms and obesity, respectively. Linear regression analyses determined the association of SSS to depressive symptoms, and logistic regression determined the association of SSS to overweight and obesity, controlling for sociodemographic factors and SES. Results. Mean society ladder ranking, a subjective measure of SES, was 7.2 ± 1.3. Mean community ladder ranking, a measure of perceived placement in the school community, was 7.6 ± 1.7. Reliability of the instrument was excellent: the intraclass correlation coefficient was 0.73 for the society ladder and 0.79 for the community ladder. Adolescents had higher society ladder rankings than their mothers (µteen = 7.2 ± 1.3 vs µmom = 6.8 ± 1.2; P = .002). Older adolescents' perceptions of familial placement in society were more closely correlated with maternal subjective perceptions of placement than those of younger adolescents (Spearman's rhoteens

Stool examination and rectal biopsy in the diagnosis and evaluation of therapy of schistosomiasis mansoni

From each of a group of 217 adult males selected through enzyme-immunoassay or skin-test (Group A), six stool samples were examined by both the Lutz/Hoffman, Pons & Janer (Lutz/HPJ) and Kato/Katz methods. In addition, one oogram of the rectal mucosa was performed. By these methods, schistosomiasis was detected in 44.7%, 47.5% and 40.1% of the individuals respectively. To evaluate the methods in the assessment of cure, the last 40 patients from group A, treated with a single oral dose of oxamniquine at 15 mg/kg were followed up for six months (Group B). The criteria for parasitological cure included three stool examinations by Kato/Katz and Lutz/HPJ methods, one, three and six months post-treatment and a rectal biopsy between the fourth and sixth months post-treatment. The examinations were negative in 87.5%, 90% and 95% of the patients, respectively. The efficacy of oxamniquine was 82.5% when the three methods were considered together and there was no statistically significant difference between the sensitivity of the individual methods.

Analysis of the mismatch between school furniture and children

The characteristics of school furniture are strongly associated with back and neck pain, referred by school-aged children. In Portugal, about 60% of the adolescents involved in a recent study reported having felt back pain at least once in the last three months. The aim of this study was to compare furniture sizes of the 2 types indicated for primary schools, within 9 schools, with the anthropometric characteristics of Portuguese students, in order to evaluate the mismatch between them. The sample consisted of 432 volunteer students. Regarding the methodology, 5 anthropometric measures were gathered, as well as 5 dimensions from the school furniture. For the evaluation of classroom furniture, a (mis)match criterion equation was defined. Results indicated that there is a significant mismatch between furniture dimensions and the anthropometric characteristics of the students.

THE SERO-CONVERSION AND EVALUATION OF RENAL ALTERATIONS IN DOGS INFECTED BY Leishmania (Infantum) chagasi

This study investigated the sero-conversion period in which dogs from endemic areas test positive for visceral leishmaniasis (VL) as well as the early post-infection period in which renal alterations are observed. Dogs that were initially negative for Canine Visceral Leishmaniasis (CVL) were clinically evaluated every three months by serological, parasitological and biochemical tests until sero-conversion was confirmed, and six months later a subsequent evaluation was performed. Samples of kidney tissues were processed and stained with Hematoxylin and Eosin (H&E), Periodic Acid Schiff (PAS) and Masson’s trichrome stain and lesions were classified based on the WHO criteria. Of the 40 dogs that initially tested negative for VL, 25 (62.5%) exhibited positive serological tests during the study period. Of these 25 dogs, 15 (60%) tested positive within three months, five (20%) tested positive within six months and five (20%) tested positive within nine months. The dogs exhibited antibody titers between 1:40 and 1:80 and 72% of the dogs exhibited clinical symptoms. The Leishmania antigen was present in the kidneys of recently infected dogs. We found higher levels of total protein and globulin as well as lower levels of albumin in the infected dogs when compared to the control dogs. Additionally, infected dogs presented levels of urea and creatinine that were higher than those of the uninfected dogs. Glomerulonephritis was detected in some of the dogs examined in this study. These data suggest that in Teresina, the sero-conversion for VL occurs quickly and showed that the infected dogs presented abnormal serum proteins, as well as structural and functional alterations in the kidneys during the early post-infection period.

School governance and academic excellence: the representations of distinguished students in an annual award of excellence

Within a research project on «academic excellence in the state school», this paper is a contribution to the sociological reflection on the cultural and organisational characteristics of the school and its relationship with the academic success of students. The data we present stem from a case study underway at a secondary school in the north of Portugal, referring to the universe of students that since 2003 have distinguished themselves for achieving grades equal to or greater than 18 (on a scale of 0 to 20) and have thus been included in the school’s Framework of Excellence. From a contextual approach to this educational practice, we focused on the cultural characteristics of the school/subject as analytical support for the study of school and non-school dimensions in their mutual connections. To this end, we used the information from document analysis and data collected from a questionnaire survey administered to more than two-thirds of the students included in the above-mentioned Framework of Excellence. Subsequently, we will use the data from this survey to understand the extent to which academic excellence is perceived as an indivisible social construction of the school’s political and organisational matrix, particularly in terms of the educational and teaching guidelines adopted by the management body. We will conclude by questioning the meaning of the school’s management policies regarding the emphasis on educational outcomes, with particular focus on the representations of excellent students in the processes of school leadership, teaching organisation, school merit and justice.

État de stress post-traumatique chez les mères et chez les pères d'enfants prématurés: similitudes et différences = Prematurity and parental post-traumatic stress disorder: similarities and differences

Objectifs Évaluer et comparer la présence de symptômes de stress post-traumatique, en fonction de la gravité de la prématurité, chez les mères et chez les pères de bébés nés prématurément. Méthode En fonction du score de risque périnatal (PERI) du bébé, les parents des prématurés (âge gestationnel moins de 34 semaines) ont été divisés en deux groupes : les parents de prématurés à faible risque (n = 16) et à haut risque (n = 26). Les symptômes d'intrusion et d'évitement, de l'état de stress post-traumatique, ont été évalués chez les parents à l'aide d'un questionnaire, l'Impact of Event Scale (IES). Leurs réponses ont été comparées à un groupe témoin de parents de nouveau-nés à terme (n = 24). Les différences entre les réponses des mères et des pères, ont été analysées. Résultats Les parents de bébés prématurés sont plus à risque que les parents de nouveau-nés à terme de présenter des symptômes de stress post-traumatique. Les mères en lien avec le fait même de la prématurité du bébé, les pères en lien avec la gravité de la prématurité. Les mères et les pères des prématurés des deux groupes (prématurés à faible risque, prématurés à haut risque) décrivent des symptômes d'intrusion, alors que les symptômes d'évitement sont décrits par toutes les mères, mais seulement par les pères de prématurés à haut risque périnatal. Conclusion La naissance prématurée est susceptible d'entraîner l'apparition de symptômes de stress post-traumatique chez les parents. Les mères et les pères réagissent différemment. Objectives Evaluation of the symptoms of parental post-traumatic stress disorder (PTSD), according to the severity of the prematurity, in mothers and fathers of premature babies. Materials and methods According to the Perinatal Risk Inventory (PERI), the parents of premature infants (gestational age less than 34 weeks) were divided into two groups, parents of a low-risk premature infants (n = 16) and of high-risk premature infants (n = 26). The symptoms of intrusion and avoidance, as a part of the post-traumatic stress disorder, were evaluated by an autoadministrated questionnaire, the Impact of Event Scale (IES). Their responses were compared with a control group of parents of full-term infants (n = 24). The differences in the answers of mothers and fathers were analysed. Results The occurrence of symptoms of post-traumatic stress disorder is increased in parents of preterm infants compared with the control group. Whereas mothers of premature infants are at risk of presenting symptoms of PTSD, linked to the prematurity, with fathers the infant perinatal risk factors play a greater role. The symptoms of intrusion are present in mothers and fathers of preterm infants of both groups. Mothers of both groups present avoidance symptoms, although only fathers of high-risk preterm infants present them. Conclusions Premature birth has an impact on both parents in terms of post-traumatic stress reactions. However, mothers and fathers react in different ways according to the severity of the prematurity.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Field Performance and Evaluation of Slurry Seals, HR-195, 1980

As part of the overall research program of evaluating asphalt emulsion slurry seal as a pavement maintenance material, 31 duplicate 500-ft test sections were constructed on U.S. 6 between Adel and Waukee in Dallas County during September and October of 1978. These test sections included combinations of eight aggregates, two gradings, three asphalt emulsions, two mineral fillers, and a range of emulsion contents determined by laboratory mix designs. The emulsion contents of the test sections varied from 10.3% for Section 7A (Ferguson coarse) to 32.9% for Section 31A (lightweight aggregate). The post-construction performance evaluation of the test sections, consisting primarily of the friction tests and surface appearance observations, was conducted at different time intervals up to 24 months after construction. At the 24-month final evaluation, most of the test sections had carried a total of 1.4 million vehicles.

Development and evaluation of iron-rich meatloaves containing pork liver for schoolchildren

AbstractIron deficiency is a highly prevalent nutritional problem worldwide and it impacts on the cognitive development of children. Therefore, the aim of this research was to develop meatloaf with high iron content by using in their formulations pork liver. Meatloaves were prepared with additions of 9.98% and 13.31% (formulations A and B) of pork liver in order to meet 15% and 20% of the daily requirement of iron (10 mg/day) for children. Samples were evaluated regarding their physicochemical, microbiological and sensory characteristics. The results were subjected to Analysis of Variance (ANOVA) followed by Tukey test. Results of physicochemical analyses showed an increase in protein and mineral contents and a decrease in fat content. The iron and zinc contents were respectively 100.0% and 70.83% (formulation A) and 152.73% and 97.92% (formulation B) higher than that of the standard formulation. Regarding fat content, the reduction of 31.5% in formulation B makes it a light product. As for the microbiological aspect, all meatloaves were adequate for consumption. Regarding sensory analysis, all the attributes considered were not statistically different, but for purchase intention test formulation B was better accepted. Therefore, formulations A and B are good sources of iron and zinc.

Participation factors in optional high school health and physical education

Student enrolment rates in optional health and physical education (HPE) classes have been steadily declining, to the point where most Ontario students stop taking HPE after completion of their one required credit, typically taken in grade nine. This study looked at factors that could contribute to HPE enrolment, sampling 227 grade ten students from five schools. These factors included selfefficacy (SE), perceived autonomy support (PAS), task value (TV), motivational regulation (autonomous, AR; controlled, CR), HPE grade average and body size discrepancy (BSD). Qualitative information was also gathered from students regarding likes and dislikes ofHPE, as well as reasons for their HPE enrolment choice. Cronbach Alpha values of each scale fell within acceptable values. ANOVA analysis revealed differences between enrolment groups in SE, TV, AR, HPE grade average, and BSD (p < .05). Reasons students reported for not taking HPE included a dislike of health classes, scheduling challenges, not needing HPE for future endeavors, concerns about social self-presentation, and a dislike of sports and/or competition. This research shows important differences between students and their HPE class choices and calls for a re-evaluation of how HPE classes are structured, advertised and scheduled by high school practitioners. Future works should look toward what other factors could be at play in students' decisions for or against optional HPE and how those factors interact with the constructs that were found to be of significance in this study. Keywords: Health and physical education, high school students, participation.

The Educational Experience of Students of Chinese Origin in a French-Speaking Context : the role of school, family, and community

Cette recherche vise à documenter l’expérience scolaire des élèves québécois d’origine chinoise à l’école secondaire de langue française et à examiner les dynamiques qui influencent la réussite scolaire de ces élèves. Elle s’intéresse plus précisément aux impacts des facteurs relatifs à l’école, à la famille immigrante, et à ceux de la communauté ethnique sur l’intégration de ces jeunes dans un contexte francophone. Les données ont été principalement recueillies à travers des entretiens semi-structurés approfondis auprès d’élèves d’origine chinoise et de différents acteurs du paradigme éducatif (parents, acteurs scolaires et intervenants communautaires). D’autres instruments, tels que l’analyse du contenu de documents et de médias, ont également été utilisés afin de fournir des informations contextuelles et d’enrichir les données d’entrevues. Les données ont été analysées selon un cadre théorique ouvert et inclusif où la réussite scolaire des élèves issus de l’immigration est mesurée en mettant l’accent sur l’influence de la maîtrise de la langue d’enseignement, du capital culturel et social de la famille et de la communauté immigrante, ainsi que des facteurs systémiques au niveau de l’école. Les résultats de cette étude dans trois écoles cibles montrent qu’en général les élèves d’origine chinoise connaissent une expérience positive, surtout en ce qui concerne leur performance scolaire en mathématiques et sciences. Cependant, les nouveaux arrivants ont tendance à éprouver des difficultés dans l’apprentissage du français et pour leur intégration sociale. En effet, le processus d’intégration socioscolaire des jeunes chinois est sous l’influence des différents milieux qu’ils fréquentent. À propos de l’influence des dynamiques scolaires, les résultats de la recherche indiquent qu’une relation maître-élève positive joue un rôle important dans la réussite éducative de ces élèves. Toutefois, l’insuffisance du soutien à l’apprentissage défavorise l’intégration linguistique et sociale des élèves nouvellement arrivés. Les données de cette étude soulignent notamment le rôle de la famille immigrante et de la communauté ethnique dans l’expérience scolaire de ces jeunes. D’une part, sous l’impact des dynamiques familiales, notamment ce qui à trait au projet migratoire, à la culture chinoise et à l’expérience pré- et post-migratoire, les parents immigrants chinois s’impliquent activement dans les études de leurs enfants, malgré des barrières linguistiques et culturelles. D’autre part, afin de surmonter les effets négatifs des faibles liens entretenus avec l’école de langue française, les parents chinois ont largement recours aux ressources au sein de la communauté ethnique, tels que les médias de langue chinoise, les organismes ethnospécifiques de services aux immigrants, l’école du samedi et les institutions religieuses ethniques. Ces institutions sociales ethniques contribuent à soutenir les valeurs culturelles, échanger des informations, établir des modèles pour les jeunes et à fournir des services appropriés en matière culturelle et linguistique.

ANALYSIS, MODIFICATION, AND EVALUATION OF THE COLD FLOW PROPERTIES OF VEGETABLE OILS AS BASE OIL FOR INDUSTRIAL LUBRICANTS

Poor cold flow properties of vegetable oils are a major problem preventing the usage of many abundantly available vegetable oils as base stocks for industrial lubricants. The major objective of this research is to improve the cold flow properties of vegetable oils by various techniques like additive addition and different chemical modification processes. Conventional procedure for determining pour point is ASTM D97 method. ASTM D97 method is time consuming and reproducibility of pour point temperatures is poor between laboratories. Differential Scanning Calorimetry (DSC) is a fast, accurate and reproducible method to analyze the thermal activities during cooling/heating of oil. In this work coconut oil has been chosen as representative vegetable oil for the analysis and improvement cold flow properties since it is abundantly available in the tropics and has a very high pour point of 24 °C. DSC is used for the analysis of unmodified and modified vegetable oil. The modified oils (with acceptable pour points) were then subjected to different tests for the valuation of important lubricant properties such as viscometric, tribological (friction and wear properties), oxidative and corrosion properties.A commercial polymethacrylate based PPD was added in different percentages and the pour points were determined in each case. Styrenated phenol(SP) was added in different concentration to coconut oil and each solution was subjected to ASTM D97 test and analysis by DSC. Refined coconut oil and other oils like castor oil, sunflower oil and keranja oil were mixed in different proportions and interesterification procedure was carried out. Interesterification of coconut oil with other vegetable oils was not found to be effective in lowering the pour point of coconut oil as the reduction attained was only to the extent of 2 to 3 °C.Chemical modification by acid catalysed condensation reaction with coconut oil castor oil mixture resulted in significant reduction of pour point (from 24 ºC to -3 ºC). Instead of using triacylglycerols, when their fatty acid derivatives (lauric acid- the major fatty acid content of coconut oil and oleic acid- the major fatty acid constituents of monoand poly- unsaturated vegetable oils like olive oil, sunflower oil etc.) were used for the synthesis , the pour point could be brought down to -42 ºC. FTIR and NMR spectroscopy confirmed the ester structure of the product which is fundamental to the biodegradability of vegetable oils. The tribological performance of the synthesised product with a suitable AW/EP additive was comparable to the commercial SAE20W30 oil. The viscometric properties (viscosity and viscosity index) were also (with out additives) comparable to commercial lubricants. The TGA experiment confirmed the better oxidative performance of the product compared to vegetable oils. The sample passed corrosion test as per ASTM D130 method.