Mesoscale plasticity anisotropy at the earliest stages of cavitation-erosion damage of a high nitrogen austenitic stainless steel

A high nitrogen austenitic stainless steel (0.9wt% N) and an ordinary 304 austenitic stainless steel were submitted to cavitation-erosion tests in a vibratory apparatus operating at a frequency of 20 kHz. The high nitrogen stainless steel was obtained by high temperature gas nitriding a 1-mm thick strip of an UNS 31803 duplex stainless steel. The 304 austenitic stainless steel was used for comparison purposes. The specimens were characterized by scanning electron microscopy and Electron Back Scatter Diffraction. The surface of the cavitation damaged specimens was analyzed trying to find out the regions where cavitation damage occurred preferentially. The distribution of sites where cavitation inception occurred was extremely heterogeneous, concentrating basically at (i) slip lines inside some grains and (ii) Sigma-3 coincidence site lattice (CSL) boundaries (twin boundaries). Furthermore, it was observed that the CE damage spread faster inside those grains which were more susceptible to damage incubation. The damage heterogeneity was addressed to plasticity anisotropy. Grains in which the crystallographic orientation leads to high resolved shear stress show intense damage at slip lines. Grain boundaries between grains with large differences in resolved shear stress where also intensely damaged. The relationship between crystallite orientation distributions, plasticity anisotropy and CE damage mechanisms are discussed. (C) 2009 Elsevier B.V. All rights reserved.

Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance

Cr3C2-NiCr and WC-Ni coatings are widely used for wear applications at high and room temperature, respectively. Due to the high corrosion resistance of NiCr binder, Cr3C2-NiCr coatings are also used in corrosive environments. The application of WC-Ni coatings in corrosive media is 14 not recommended due to the poor corrosion resistance of the (pure Ni) metallic matrix. It is well known that the addition of Cr to the metallic binder improves the corrosion properties. Erosion-corrosion performance of thermal spray coatings is widely influenced by ceramic phase composition, the size of ceramic particles and also the composition of the metallic binder. In the present work, two types of HVOF thermal spray coatings (Cr3C2-NiCr and WC-Ni) obtained with different spray conditions were studied and compared with conventional micro-cracked hard chromium coatings. Both as-sprayed and polished samples were tested under two erosion-corrosion conditions with different erosivity. Tungsten carbide coatings showed better performance under the most erosive condition, while chromium carbide coatings were superior under less erosive conditions. Some of the tungsten carbide coatings and hard chromium showed similar erosion-corrosion behaviour under more and less erosive conditions. The erosion-corrosion and electrochemical results showed that surface polishing improved the erosion-corrosion properties of the thermally sprayed coatings. The corrosion behaviour of the different coatings has been compared using Electrochemical Impedance Spectroscopy (EIS) and polarization curves. Total material loss due to erosion-corrosion was determined by weight loss measurements. An estimation of the corrosion contribution to the total weight loss was also given. (c) 2007 Elsevier B.V. All rights reserved.

A mosaic of beach bean (Canavalia rosea) caused by an isolate of Cowpea aphid-borne mosaic virus (CABMV) in Brazil

Beach bean (Canavalia rosea) plants showing mosaic symptoms were found at Massaguacu beach, Caraguatatuba, Brazil. A potyvirus was found to be responsible for the symptoms, based on transmission assays and electron microscopy. A positive reaction in ELISA was obtained against cowpea aphid-borne mosaic (CABMV) antisera. Viral identity was confirmed by RT-PCR using specific primers to amplify part of the NIb and the entire CP coding region of the genome and the 3`NTR. Comparison of the amplified sequences with that of CABMV showed a nucleotide sequence identity of 97% for the CP coding region. Thus, the potyvirus from beach bean should be considered a CABMV isolate, referred to as CABMV-Cr.

View from Sunshine Beach House, Sunshine Coast

View to ocean from upper level viewing deck.

View from Sunshine Beach House, Sunshine Coast

View through aluminium louvers as seen from interior.

View from Sunshine Beach House, Sunshine Coast

View to ocean for upper level viewing deck.

West elevation, Sunshine Beach House, Sunshine Coast

Part of western rear facade with fenestrations.

Rear entrance door, Sunshine Beach House, Sunshine Coast

View of rear entrance door.

Timber shutter, Sunshine Beach House, Sunshine Coast

Detail view through timber shutter as seen from interior.

View from Sunshine Beach House, Sunshine Coast

View to ocean as seen from upper level viewing deck.

Sunshine Beach House, Sunshine Coast

View down upper level hallway.

Timber shutter, Sunshine Beach House, Sunshine Coast

Detailed view though timber shutter as seen from interior.

View from Sunshine Beach House, Sunshine Coast

View to ocean for upper level viewing deck.

Timber shutters, Sunshine Beach House, Sunshine Coast

View of timber shutters as seen from interior.

North elevation, Sunshine Beach House, Sunshine Coast

Part of northern street elevation, with fenestrations, external shower and entrance.