Diatom abundance and paleo-temperature reconstruction for sediment cores from the southeast Norwegian Sea

Although the pulsating nature and the abruptness of the last deglaciation are well documented in marine and land records, very few marine records have so far been able to capture the high-frequency climatic changes recorded in the Greenland ice core Dye 3. We studied high-resolution sediment cores from SE Norwegian Sea, which display a detailed climatic record during the last deglaciation comparable to that of Dye 3. Accelerator mass spectrometry age control of the cores enables us to correlate this record in detail with continental records. The results indicate that the surface waters of the SE Norwegian Sea were seasonally ice free after 13,400 B.P. The Bølling/Allerød interstadial complex (13,200-11,200 B.P.) was a climatically unstable period with changing Arctic-Subarctic conditions. This period was punctuated by four progressively more severe sea surface temperature (SST) minima: between 12,900-12,800 B.P. (BCP I); 12,500-12,400 B.P. (BCP II); 12,300-12,000 B.P. (OD I); and 11,800-11,500 B.P. (OD II). The Younger Dryas (YD) (11,200-10,200 B.P.) represents the severest and most prolonged cold episode of this series of climatic deteriorations. It was bounded by very rapid SST changes and characterized by Arctic-Polar conditions. The first true warm Atlantic water incursion to the SE Norwegian Sea took place around 10,100 B.P., followed by a brief cooler condition between 9900-9600 B.P. (YD II). The early Holocene climatic optimum occurred between 8000-5000 B.P. A conceptual model is proposed where meltwater fluxes are suggested to cause the observed instability in the SST record.

Estructura robótica Pre-Tensada para robot en tuberías petroleras

En este trabajo se presenta el desarrollo de un robot basado en la estructura Pre-Tensada con el fin de realizar tareas de inspección y mantenimiento en tuberías petroleras. Este tipo de estructura mecánica se caracteriza por su bajo peso y su alta capacidad de adaptación a los diferentes diámetros. La aplicación requiere que el dispositivo desarrollado se desplace verticalmente y a alta velocidad por las tuberías utilizadas en la extracción del petróleo. Cabe destacar que en dichas instalaciones se cuenta con Bombas Electro Sumergibles (BES) y Bombas de Cavidad Progresiva (BCP), ambas muy sensibles a las condiciones adversas del entorno; por lo tanto, la importancia de esta investigación radica en que el robot incorpora una red de sensores específicos para medir aquellas variables que puedan interferir en el funcionamiento normal de las bombas. Además, este robot permite automatizar la recuperación de objetos que pueden caer al pozo durante la instalación y mantenimiento del mismo, actualmente este proceso es manual. En este artículo se describen detalladamente las hipótesis de diseño realizadas y la metodología utilizada para el desarrollo del primer prototipo. Finalmente se presentan los resultados obtenidos de dicho desarrollo a través de los cuales se ha podido validar la potencialidad de la aplicación.

Diseño e implementación de robot prototipo para la inspección de tuberías en pozos petroleros (bombas de cavidad progresiva y bombas electro sumergibles)

En este trabajo se presenta el desarrollo de un robot basado en la estructura tensegrity con el fin de realizar tareas de inspección y mantenimiento en tuberías petroleras. Debido a la naturaleza de la aplicación, el robot debe ser capaz de desplazarse verticalmente por el exterior de una dicha tubería. Este tipo de estructura mecánica se caracteriza por su bajo peso y su alta capacidad de adaptación a los diferentes diámetros. La aplicación requiere que el dispositivo desarrollado se desplace a alta velocidad por las tuberías utilizadas en la extracción del petróleo. Cabe destacar que en dichas instalaciones se cuenta con Bombas Electro Sumergibles (BES) y Bombas de Cavidad Progresiva (BCP), ambas muy sensibles a las condiciones adversas del entorno. Consecuentemente se prevé que el robot incorpore una red de sensores específicos para medir aquellas variables que puedan interferir en el funcionamiento normal de las bombas. En este artículo se describen detalladamente las hipótesis de diseño realizadas y la metodología utilizada para el desarrollo del primer prototipo. Finalmente se presentan los resultados obtenidos de dicho desarrollo a través de los cuales se ha podido validar la potencialidad de la aplicación.

Inflammatory microcrystals induce murine macrophage survival and DNA synthesis

The interaction of particulates with resident macrophages is a consistent feature in certain forms of crystal-induced inflammation, for example, in synovial tissues, lung, and the peritoneum. The mitogenic activity of basic calcium phosphate (BCP) crystals and calcium pyrophosphate dihydrate (CPPD) crystals on synovial fibroblasts has been considered relevant to the synovial hyperplasia observed in crystal-induced arthritis. The aim of the study was to determine whether microcrystals such as these could enhance macrophage survival and induce DNA synthesis, thus indicating that they may contribute to the tissue hyperplasia.

Estudo da durabilidade de painéis de partículas de bagaço de cana de açúcar e resina poliuretana a base de óleo de mamona para aplicação na construção civil

O presente trabalho tem por objetivo avaliar o desempenho físico-mecânico e a durabilidade de painéis de partículas de bagaço de cana-de-açúcar com resina bicomponente a base de mamona (BCP) e compará-los com painéis de partículas de madeira comerciais (Medium Density Particleboard - MDP). Os painéis de bagaço de cana de açúcar foram fabricados com um teor de resina poliuretana a base de óleo de maona de 15%. O desempenho físico e mecânico dos painéis particulados foi analisado com base nas prescrições dos documentos normativos vigentes. Ambos os materiais foram revestidos superficialmente com resina poliuretana bicomponente à base de óleo de mamona. Avaliou-se a influência do tratamento das bordas na deterioração e no desempenho dos painéis. O acompanhamento das propriedades físico-mecânicas foi realizado antes e após os ensaios de envelhecimento por exposição natural durante 3, 6 e 12 meses, envelhecimento acelerado e de intemperismo artificial. Foi feita a avaliação, da suscetibilidade ao crescimento gerada pelo ataque de fungos emboloradores e apodrecedores nos materiais durante o envelhecimento natural e no ensaio acelerado. Foi realizada a análise colorimétrica para a identificação de mudanças de cor e brilho nos materiais após os ensaios de deterioração. Foram utilizadas as técnicas de densitometria de raios X, espectroscopia por infravermelho próximo (NIR). Os resultados obtidos indicaram a selagem lateral permitiu avaliar a superfície exposta do material permitindo a entrada da água pela superfície avaliando o efeito dos agentes de deterioração. A porcentagem de retenção para o Módulo de ruptura após o ensaio de envelhecimento por imersão em agua e secagem (APA D1) foi de 87% e 3% para BCP e MDP sem revestimento respectivamente e de 90% e 3% para BCP e MDP com revestimento. A porcentagem de retenção das propriedades mecânicas em ambos os submetidos à exposição natural diminuiu em função do tempo. Entretanto o porcentagem de retenção para os materiais BCP e MDP com revestimento superficial foi de 76% e 60% para MOR. A exposição natural mostrou que os fungos emboloradores foram predominantes em ambos os materiais. Ambos os materiais com revestimento superficial apresentaram entre 1-10% de colonização com um 70% de probabilidade. Revestimento de resina de óleo de mamona reduz o crescimento de fungos em ambos os materiais no ensaio acelerado. O perfil de densitometria permitiu analisar o processo de fabricação dos painéis e permitiu identificar a deterioração gradativa do ambos os materiais após os ensaios de envelhecimento. A intepretação mediante a analise de componentes principais (ACP) na aplicação do NIR comportou a classificação das características relacionadas a cada ensaio de deterioração de ambos os materiais sem revestimento superficial. Com base nos resultados deste trabalho, foram propostas contribuições para ajustes de metodologias para a avaliação da durabilidade e do desempenho físico e mecânico dos painéis particulados, tendo em vista a sua viabilidade técnica, em sistemas construtivos da construção civil.

Recommendations for Genetic Testing to Reduce the Incidence of Anthracycline-induced Cardiotoxicity

AIM Anthracycline-induced cardiotoxicity (ACT) occurs in 57% of treated patients and remains an important limitation of anthracycline-based chemotherapy. In various genetic association studies, potential genetic risk markers for ACT have been identified. Therefore, we developed evidence-based clinical practice recommendations for pharmacogenomic testing to further individualize therapy based on ACT risk. METHODS We followed a standard guideline development process; including a systematic literature search, evidence synthesis and critical appraisal, and the development of clinical practice recommendations with an international expert group. RESULTS RARG rs2229774, SLC28A3 rs7853758 and UGT1A6 rs17863783 variants currently have the strongest and the most consistent evidence for association with ACT. Genetic variants in ABCC1, ABCC2, ABCC5, ABCB1, ABCB4, CBR3, RAC2, NCF4, CYBA, GSTP1, CAT, SULT2B1, POR, HAS3, SLC22A7, SCL22A17, HFE and NOS3 have also been associated with ACT, but require additional validation. We recommend pharmacogenomic testing for the RARG rs2229774 (S427L), SLC28A3 rs7853758 (L461L) and UGT1A6*4 rs17863783 (V209V) variants in childhood cancer patients with an indication for doxorubicin or daunorubicin therapy (Level B - moderate). Based on an overall risk stratification, taking into account genetic and clinical risk factors, we recommend a number of management options including increased frequency of echocardiogram monitoring, follow-up, as well as therapeutic options within the current standard of clinical practice. CONCLUSIONS Existing evidence demonstrates that genetic factors have the potential to improve the discrimination between individuals at higher and lower risk of ACT. Genetic testing may therefore support both patient care decisions and evidence development for an improved prevention of ACT.

Computational analysis of base composition pattern and promoter elements in the putative promoter regions in relation to expression profiles of 682 human genes on chromosome 22

The base composition pattern (BCP) in the putative promoter region (PPRs) up to 5 Kb lengths of 682 human genes on Chromosome 22 (Chr22) was examined. Two-dimensional (2D) and three-dimensional (3D) functions were designed to delineate the DNA base composition, with four major patterns identified. It is found that 17.6% genes include TATA box, 28.0% GC box, 18.9% CAAT box and 38.4% CpG islands, and approximately 10% genes have one of four putative initiator (Inr) motifs. The occurrence of the promoter elements is tightly associated with the base composition features in the promoter regions, and the associations of the base composition features with occurrence of the promoter elements in the promoter regions mediate tissue-wide expression of the genes in human. The occurrence of two or more promoter elements in the promoter regions is required for the medium- and wide-range expression profiles of the human genes on Chr22. Thus, the reported data shed light on the characteristics of the PPRs of the human genes on Chr22, which may improve our understanding of regulatory roles of the PPRs with occurrence of the promoter elements in gene expression.

O Valor da Marca Banco BPI – Um Estudo de Caso

Este estudo teve como principal objetivo determinar o valor da marca Banco BPI na perspetiva dos clientes e financeira, recorrendo-se à distribuição de 250 inquéritos a clientes BPI para determinar o valor da marca na perspetiva dos clientes e à aplicação do método EVA para determinar o valor da marca na perspetiva financeira. Os inquiridos demonstraram uma perspetiva positiva nas várias dimensões do valor percebido da marca, no entanto a dimensão que apresentou a média mais elevada foi a notoriedade e a mais baixa foi a avaliação global da marca. De acordo com a análise fatorial exploratória efetuada, constatou-se que há duas componentes (fatores latentes) que parecem explicar o valor percecionado na perspetiva dos clientes. A primeira está relacionada com a confiança e fidelidade que os clientes possuem para com o Banco BPI e a segunda com o conhecimento das características do banco. Por sua vez, a qualidade percebida possui um peso semelhante em ambas as componentes. Ao longo do período temporal histórico considerado observaram-se EVA positivos para o Banco BPI. Através da comparação do EVA deste com o seu benchmark (Millennium BCP) verificou-se que o EVA do BPI é superior. O valor da marca na perspetiva financeira foi obtido através do método EVA usando diferentes cenários possíveis para o crescimento dos resultados e capitais investidos e por comparação com o valor da empresa, usando variáveis do benchmark. Desta forma, obtiveram-se resultados positivos em ambas as perspetivas, tal como era esperado, pelo que se concluiu que a marca Banco BPI possui um valor global positivo.

Self-assembly-driven electrospinning:the transition from fibers to intact beaded morphologies

Polymer beads have attracted considerable interest for use in catalysis, drug delivery, and photo­nics due to their particular shape and surface morphology. Electrospinning, typically used for producing nanofibers, can also be used to fabricate polymer beads if the solution has a sufficiently low concentration. In this work, a novel approach for producing more uniform, intact beads is presented by electrospinning self-assembled block copolymer (BCP) solutions. This approach allows a relatively high polymer concentration to be used, yet with a low degree of entanglement between polymer chains due to microphase separation of the BCP in a selective solvent system. Herein, to demonstrate the technology, a well-studied polystyrene-poly(ethylene butylene)–polystyrene triblock copolymer is dissolved in a co-solvent system. The effect of solvent composition on the characteristics of the fibers and beads is intensively studied, and the mechanism of this fiber-to-bead is found to be dependent on microphase separation of the BCP.

Pharmacovigilance in children : detecting adverse drug reactions in routine electronic healthcare records. A systematic review

This article is protected by copyright. All rights reserved.

Pharmacovigilance in children : detecting adverse drug reactions in routine electronic healthcare records. A systematic review

This article is protected by copyright. All rights reserved.

Pharmacovigilance in children : detecting adverse drug reactions in routine electronic healthcare records. A systematic review

This article is protected by copyright. All rights reserved.

The morphology of ordered block copolymer patterns as probed by high resolution imaging

The microphase separation of block copolymer (BCP) thin films can afford a simple and cost-effective means to studying nanopattern surfaces, and especially the fabrication of nanocircuitry. However, because of complex interface effects and other complications, their 3D morphology, which is often critical for application, can be more complex than first thought. Here, we describe how emerging microscopic methods may be used to study complex BCP patterns and reveal their rich detail. These methods include helium ion microscopy (HIM) and high resolution x-section transmission electron microscopy (XTEM), and complement conventional secondary electron and atomic force microscopies (SEM and TEM). These techniques reveal that these structures are quite different to what might be expected. We illustrate the advances in the understanding of BCP thin film morphology in several systems, which result from this characterization. The systems described include symmetric, lamellar forming polystyrene-b-polymethylmethacrylate (PS-b-PMMA), cylinder forming polystyrene-b-polydimethylsiloxane (PS-b-PDMS), as well as lamellar and cylinder forming patterns of polystyrene-b-polyethylene oxide (PS-b-PEO) and polystyrene-b-poly-4-vinylpyridine (PS-b-P4VP). Each of these systems exhibits more complex arrangements than might be first thought. Finding and developing techniques whereby complex morphologies, particularly at very small dimensions, can be determined is critical to the practical use of these materials in many applications. The importance of quantifying these complex morphologies has implications for their use in integrated circuit manufacture, where they are being explored as alternative pattern forming methods to conventional UV lithography.

Formation of sub-7 nm feature size PS-b-P4VP block copolymer structures by solvent vapour process

The nanometer range structure produced by thin films of diblock copolymers makes them a great of interest as templates for the microelectronics industry. We investigated the effect of annealing solvents and/or mixture of the solvents in case of symmetric Poly (styrene-block-4vinylpyridine) (PS-b-P4VP) diblock copolymer to get the desired line patterns. In this paper, we used different molecular weights PS-b-P4VP to demonstrate the scalability of such high χ BCP system which requires precise fine-tuning of interfacial energies achieved by surface treatment and that improves the wetting property, ordering, and minimizes defect densities. Bare Silicon Substrates were also modified with polystyrene brush and ethylene glycol self-assembled monolayer in a simple quick reproducible way. Also, a novel and simple in situ hard mask technique was used to generate sub-7nm Iron oxide nanowires with a high aspect ratio on Silicon substrate, which can be used to develop silicon nanowires post pattern transfer.