904 resultados para Angulação mésio-distal
Resumo:
OBJETIVO: verificar se o mini-implante no palato é eficaz como ancoragem direta para distalização dos molares superiores. MÉTODOS: foi utilizado um modelo em acrílico da arcada superior. Após a confecção da canaleta na região correspondente aos alvéolos dentários, os dentes em acrílico foram fixados com cera #7, montado aparelho ortodôntico com a técnica Edgewise e inserido um mini-implante (SIN, São Paulo) no local correspondente à rafe palatina. Foram colocados arco 0,19" x 0,25" e barra transpalatina, soldados na barra dois ganchos para retenção de dois elásticos em cadeia de dois elos, a uma carga de 150g/f de cada lado (Unitek), que se estenderam dos ganchos até o mini-implante. O modelo da maxila foi mergulhado 40 vezes em banheira e fotografado após cada mergulho para observação da movimentação dentária. Os dados foram analisados pela análise da variânçia (ANOVA) e teste de Tukey. RESULTADOS: os molares deslocaram-se distalmente 3,1mm, em média, com inclinação distal entre 3 e 5mm. CONCLUÕES: a movimentação dos molares ocorreu pela inclinação distal, com leve rotação, mas sem efeito extrusivo.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Odontologia - FOA
Resumo:
Foram analisados 100 dentes primeiros molares e 100 dentes segundos molares superiores, direitos e esquerdos, permanentes, extraídos de humanos, com o objetivo de explorar a região anatômica da furca, mais especificamente realizar medidas das distâncias das aberturas das furcas vestibular, mesial, e distal até à junção esmalte-cemento, e das distâncias das referidas aberturas até às faces radiculares pertinentes: vestibular, mesial, distal e lingual. Utilizou-se para mensuração um microcomputador 486 DX-66Mhz, no qual estava instalado um software analisador de imagens Mocha-Jandel Scientific SigmaScan Pro, version 2.0. Em relação às distâncias das aberturas das furcas até à junção esmalte-cemento foi observado que as distâncias médias para a furca vestibular foram de 3,50mm e 3,03mm; para a furca mesial de 4,44mm e 4,69mm; para a furca distal de 4,26mm e 3,73mm, respectivamente para os primeiros e segundos molares superiores. Em relação às distâncias das aberturas das furcas até às faces radiculares pertinentes foi observado que as distâncias médias da furca vestibular até à face mesial da raiz mesio-vestibular foram de 3,78mm e 3,72mm; da furca vestibular até a face distal da raiz disto-vestibular 3,62 e 3,64mm; da furca mesial até à face vestibular da raiz mesio-vestibular 7,33mm e 6,89mm; da furca mesial até a face lingual da raiz lingual de 4,13mm e 4,33mm; da furca distal até à face vestibular da raiz disto-vestibular de 5,61mm e 5,09mm; da furca distal até a face lingual da raiz lingual de 4,73mm e 4,65mm, respectivamente para os primeiros e segundos molares superiores.
Resumo:
This work demonstrates the technique of perineural anesthetic blocks made in the distal forelimb of the horse, and also covers aspects relating to the interpretation of the results obtained with the procedure. The limit of the subject the distal forelimb of horses is explained by the distribution of common lameness, being more frequent in this region. The procedure is intended to provide analgesia to a region of the limb, causing the animal to stop limping or decrease the intensity of claudication temporarily, since this region is responsible for the claudication, allowing thus, the likely location of the lesion, which may be investigated by other helper methods to confirm the diagnosis. Besides the description of the technique, were approached concerning aspects to the location of the anatomical structures involved, materials needed, cares with the animals, and possible complications from the procedure
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The work presented here aims to evaluate how aesthetic norm variations influence the perception of attractiveness of a smile according to dentists and laymen. Methods: The smiles in photographs of a man and a woman were digitally changed. Eleven smiles were created for each one: an ideal, control smile - an ideal smile according to accepted norms - and 10 smiles containing individual variations of each of the following norms: a) 2mm and 3mm deviations from the middle line; b) the contour of the smile - contour of a straight smile and contour of a reverse smile; c) the angle of the lateral incisors - a mesial angle of 10° and a distal angle of 10°; d) 0.5mm and 1mm diastema; and e) dental proportion - Alber’s Proportion and Plato’s Proportion. The photographs were evaluated by two specialists in cosmetic dentistry and two laymen using the visual analogue scale. Results: The ideal smile for both genders was well accepted by both the specialists and the laymen. The opinions on the smiles with aesthetic variations varied, some were more positive than others, some were in agreement and some were in disagreement. Conclusion: The absence of deviations favors the perceived beauty of a smile, but some aesthetic variations seem to be better accepted than others. The success of aesthetic treatments depends on the active participation of dentists and patients in the planning stage.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnologico (CNPq)
Resumo:
The free-end removable partial dentures (RPD) shows a complicated and peculiar biomechanical behavior that impose high occlusion forces to the abutment teeth. By this way, the aim of this study was to evaluate the several factors that influence the clasps indication to free-end RPD. It was analysed 84 designed and planned study models of 71 patients, involving 130 clasps near-by a free-end; followed by clinical and radiographical informations. It was observed that bar clasps (“T”, “Tmod”, “i”) were used in 88.46% of abutment teeth. In the others (11.55%), it was used simple, combinated or ring circumferential clasps, and MDL. In abutment teeth with high equator line the “i” clasps were predominant (48.48%). The “Tmod” clasps were predominant in abutment teeth with low equator line (50%) or in middle third (51.35%) and “T” clasps were predominant in inclined equators with mesio-buccal (56.52%) or disto-buccal (66.66%) retention. In the posterior abutment teeth, it was prevalent the distal rest (63.52%) and embracing to the adjacent tooth. Some others factors like long clinical crown (5.38%), wrong position of abutment teeth (4.61%), aesthetics (3.07%), retention in alveolar ridge (2.3%), fragility of abutment teeth (1.53%), short clinical crown (0.76%) and short space to the clasp (0.76%) influenced directly during the clasps selection. Factors like mobility of abutment teeth, height of muscular insertions, depth of buccal fornix and antagonist arch acted like secondary factors. After the informations analysis it may be concluded that the bar clasps with distal rest and embracing to the adjacent tooth were the most indicated to free-end RPD
Resumo:
Background: Considering the limited qualitative and quantitative bone in the posterior arch, this modality of prosthetic treatment could provide a positive emotional factor reestablished by immovability of the anterior fixed implant-supported segment. Objective: This clinical report demonstrates the possibility of achieving positive results with a removable partial denture connected to an implant-supported fixed prosthesis associated to an extra resilient attachment. Clinical significance: In cases of posterior mandibular and maxilla atrophy added to the patients desire against the bone graft, this kind of prosthetic treatment has an important place as an alternative.
Resumo:
The aim of this study was to evaluate the influence of implant angulation and abutment type (UCLA and Estheticone) on stress distribution in screw-retained implant-supported prostheses through photoelasticity. Three models were fabricated with photoelastic resin PL-2 (Vishay, Micro-Measurements Group, Inc Raleigh, N.C., USA) containing one external hexagon implant with 3.75x10mm (Master screw, Conexão Sistemas de Prótese Ltda., Arujá, São Paulo) with 0°, 17° and 30° degrees and a screw-retained prostheses with UCLA and Estheticone abutments. The assembly was positioned in a circular polariscope; axial and oblique (45° degrees) loads of 100N were applied in fixed points on the occlusal crown surfaces by a universal testing machine. The stress generated was photographed and analyzed qualitatively with appropriate software (Adobe Photoshop®). The results demonstrated the same number of fringes for both abutment types for each angulation, with fringes increasing in the same way. A higher number of fringes were closer in the oblique loading mode. It was concluded that there was no significant difference in stress distribution in prostheses with UCLA and Estheticone abutments. Higher stress concentrations were observed with increased implant angulation. Stress concentration and intensity were higher in the oblique load than in axial load application.
Resumo:
We report a case of an immunocompetent infant, with no evidence of neurological disorders, which developed clinical manifestation of recurrent crisis of choking, dysphagia, laryngeal stridor and sub costal retractions since the first day of life. Direct laryngoscopy was unremarkable. Upper gastrointestinal series showed a dilated tortuous esophagus with severe peristalsis impairment and reflux episodes till the proximal third of the esophagus. An upper gastrointestinal endoscopy showed a moderately dilated esophagus with erosive lesions in the distal esophagus. Esophageal biopsy specimens revealed CMV inclusion bodies associated to moderate inflammation and immunohistochemistry was positive for CMV early antigen. Prolonged 24 h esophageal pH metry was within normal limits. Antiviral therapy with intravenous ganciclovir was introduced and was associated with rapid improvement of the symptoms. Child gradually increased oral intake and weight gain, and there were no side effects related to therapy. Thus, the respiratory symptoms could have been a supra esophageal manifestation of a non-acid reflux disease related to the CMV esophagitis.
Resumo:
Background: Unstable distal femoral fractures in children are challenging lesions with restricted surgical options for adequate stabilization. Elastic nails have become popular for treating femoral shaft fractures, yet they are still challenging for using in distal fractures. The aim of this study was to test whether end caps (CAP) inserted into the nail extremity improved the mechanical stabilization of a segmental defect at the distal femoral metaphyseal-diaphyseal junction created in an artificial pediatric bone model. Methods: Two 3.5-mm titanium elastic nails (TEN) were introduced intramedullary into pediatric femur models, and a 7.0-mm-thick segmental defect was created at the distal diaphyseal-metaphyseal junction. Nondestructive 4-point bending, axial-bending, and torsion tests were conducted. After this, the end caps were inserted into the external tips of the nails and then screwed into the bone cortex. The mechanical tests were repeated. Stiffness, displacement, and torque were analyzed using the Wilcoxon nonparametric test for paired samples. Results: In the combined axial-bending tests, the TEN + CAP combination was 8.75% stiffer than nails alone (P < 0.01); in torsion tests, the TEN + CAP was 14% stiffer than nails alone (P < 0.01). In contrast, the 4-point bending test did not show differences between the methods (P = 0.91, stiffness; P = 0.51, displacement). Thus, the end caps contributed to an increase in the construct stability for torsion and axial-bending forces but not for 4-point bending forces. Conclusions: These findings indicate that end caps fitted to elastic nails may contribute to the stabilization of fractures that our model mimics (small distal fragment, bone comminution, and distal bone fragment loss).
Resumo:
de Araujo CC, Silva JD, Samary CS, Guimaraes IH, Marques PS, Oliveira GP, do Carmo LGRR, Goldenberg RC, Bakker-Abreu I, Diaz BL, Rocha NN, Capelozzi VL, Pelosi P, Rocco PRM. Regular and moderate exercise before experimental sepsis reduces the risk of lung and distal organ injury. J Appl Physiol 112: 1206-1214, 2012. First published January 19, 2012; doi:10.1152/japplphysiol.01061.2011.-Physical activity modulates inflammation and immune response in both normal and pathologic conditions. We investigated whether regular and moderate exercise before the induction of experimental sepsis reduces the risk of lung and distal organ injury and survival. One hundred twenty-four BALB/c mice were randomly assigned to two groups: sedentary (S) and trained (T). Animals in T group ran on a motorized treadmill, at moderate intensity, 5% grade, 30 min/day, 3 times a week for 8 wk. Cardiac adaptation to exercise was evaluated using echocardiography. Systolic volume and left ventricular mass were increased in T compared with S group. Both T and S groups were further randomized either to sepsis induced by cecal ligation and puncture surgery (CLP) or sham operation (control). After 24 h, lung mechanics and histology, the degree of cell apoptosis in lung, heart, kidney, liver, and small intestine villi, and interleukin (IL)-6, KC (IL-8 murine functional homolog), IL-1 beta, IL-10, and number of cells in bronchoalveolar lavage (BALF) and peritoneal lavage (PLF) fluids as well as plasma were measured. In CLP, T compared with S groups showed: 1) improvement in survival; 2) reduced lung static elastance, alveolar collapse, collagen and elastic fiber content, number of neutrophils in BALF, PLF, and plasma, as well as lung and distal organ cell apoptosis; and 3) increased IL-10 in BALF and plasma, with reduced IL-6, KC, and IL-1 beta in PLF. In conclusion, regular and moderate exercise before the induction of sepsis reduced the risk of lung and distal organ damage, thus increasing survival.
Resumo:
Background/Aims: Epidemiological studies suggest that stress has an impact on asthmatic exacerbations. We evaluated if repeated stress, induced by forced swimming, modulates lung mechanics, distal airway inflammation and extracellular matrix remodeling in guinea pigs with chronic allergic inflammation. Methods: Guinea pigs were submitted to 7 ovalbumin or saline aerosols (1-5 mg/ml during 4 weeks; OVA and SAL groups). Twenty-four hours after the 4th inhalation, guinea pigs were submitted to the stress protocol 5 times a week during 2 weeks (SAL-S and OVA-S groups). Seventy-two hours after the 7th inhalation, guinea pigs were anesthetized and mechanically ventilated. Resistance and elastance of the respiratory system were obtained at baseline and after ovalbumin challenge. Lungs were removed, and inflammatory and extracellular matrix remodeling of distal airways was assessed by morphometry. Adrenals were removed and weighed. Results: The relative adrenal weight was greater in stressed guinea pigs compared to non-stressed animals (p < 0.001). Repeated stress increased the percent elastance of the respiratory system after antigen challenge and eosinophils and lymphocytes in the OVA-S compared to the OVA group (p < 0.001, p = 0.003 and p < 0.001). Neither collagen nor elastic fiber contents were modified by stress in sensitized animals. Conclusions: In this animal model, repeated stress amplified bronchoconstriction and inflammatory response in distal airways without interfering with extracellular matrix remodeling. Copyright (C) 2011 S. Karger AG, Basel