anonymi tractatus de logica.

Colbertinus

Logica Alberti de Saxonia.

Fonds non déterminé.

Design, development and assessment of the Java Intelligent Tutoring System

The "Java Intelligent Tutoring System" (JITS) research project focused on designing, constructing, and determining the effectiveness of an Intelligent Tutoring System for beginner Java programming students at the postsecondary level. The participants in this research were students in the School of Applied Computing and Engineering Sciences at Sheridan College. This research involved consistently gathering input from students and instructors using JITS as it developed. The cyclic process involving designing, developing, testing, and refinement was used for the construction of JITS to ensure that it adequately meets the needs of students and instructors. The second objective in this dissertation determined the effectiveness of learning within this environment. The main findings indicate that JITS is a richly interactive ITS that engages students on Java programming problems. JITS is equipped with a sophisticated personalized feedback mechanism that models and supports each student in his/her learning style. The assessment component involved 2 main quantitative experiments to determine the effectiveness of JITS in terms of student performance. In both experiments it was determined that a statistically significant difference was achieved between the control group and the experimental group (i.e., JITS group). The main effect for Test (i.e., pre- and postiest), F( l , 35) == 119.43,p < .001, was qualified by a Test by Group interaction, F( l , 35) == 4.98,p < .05, and a Test by Time interaction, F( l , 35) == 43.82, p < .001. Similar findings were found for the second experiment; Test by Group interaction revealed F( 1 , 92) == 5.36, p < .025. In both experiments the JITS groups outperformed the corresponding control groups at posttest.

Proceedings of the Court Martial, held on the officers and crew of His Majesty's late ship, the Java. --

Ordered to be printed 10th May 1813.

Proceedings of the Court Martial, held on the officers and crew of His Majesty's late ship, the Java.

Ordered to be printed 10th May 1813.

Nuevo sistema de logica inducativa y deductiva

UANL

Institutiones philosophicae ad usum seminariorum et collegiorum : logica, metaphysica, moralis

UANL

Identification et localisation des préoccupations fonctionnelles dans un code légataire Java

Traditionnellement, les applications orientées objets légataires intègrent différents aspects fonctionnels. Ces aspects peuvent être dispersés partout dans le code. Il existe différents types d’aspects : • des aspects qui représentent des fonctionnalités métiers ; • des aspects qui répondent à des exigences non fonctionnelles ou à d’autres considérations de conception comme la robustesse, la distribution, la sécurité, etc. Généralement, le code qui représente ces aspects chevauche plusieurs hiérarchies de classes. Plusieurs chercheurs se sont intéressés à la problématique de la modularisation de ces aspects dans le code : programmation orientée sujets, programmation orientée aspects et programmation orientée vues. Toutes ces méthodes proposent des techniques et des outils pour concevoir des applications orientées objets sous forme de composition de fragments de code qui répondent à différents aspects. La séparation des aspects dans le code a des avantages au niveau de la réutilisation et de la maintenance. Ainsi, il est important d’identifier et de localiser ces aspects dans du code légataire orienté objets. Nous nous intéressons particulièrement aux aspects fonctionnels. En supposant que le code qui répond à un aspect fonctionnel ou fonctionnalité exhibe une certaine cohésion fonctionnelle (dépendances entre les éléments), nous proposons d’identifier de telles fonctionnalités à partir du code. L’idée est d’identifier, en l’absence des paradigmes de la programmation par aspects, les techniques qui permettent l’implémentation des différents aspects fonctionnels dans un code objet. Notre approche consiste à : • identifier les techniques utilisées par les développeurs pour intégrer une fonctionnalité en l’absence des techniques orientées aspects • caractériser l’empreinte de ces techniques sur le code • et développer des outils pour identifier ces empreintes. Ainsi, nous présentons deux approches pour l’identification des fonctionnalités existantes dans du code orienté objets. La première identifie différents patrons de conception qui permettent l’intégration de ces fonctionnalités dans le code. La deuxième utilise l’analyse formelle de concepts pour identifier les fonctionnalités récurrentes dans le code. Nous expérimentons nos deux approches sur des systèmes libres orientés objets pour identifier les différentes fonctionnalités dans le code. Les résultats obtenus montrent l’efficacité de nos approches pour identifier les différentes fonctionnalités dans du code légataire orienté objets et permettent de suggérer des cas de refactorisation.

Inférence statique et par contraintes des relations de composition dans des programmes Java

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Interpretazione in una logica n-dimensionale di Metafisica 4,4

Il Principio di non contraddizione (PNC) così come tradizionalmente inteso sembra minare alla base la possibilità di un'alterità « assoluta », di un'alterità, cioè che non sia in nessun modo riconducibile ad un'ipseità che la conosca. [...]

Geodynamics of the Andaman - Sumatra - Java Trench - Arc System Based on Gravity and Seismotectonic Study

This work aims to study the variation in subduction zone geometry along and across the arc and the fault pattern within the subducting plate. Depth of penetration as well as the dip of the Benioff zone varies considerably along the arc which corresponds to the curvature of the fold- thrust belt which varies from concave to convex in different sectors of the arc. The entire arc is divided into 27 segments and depth sections thus prepared are utilized to investigate the average dip of the Benioff zone in the different parts of the entire arc, penetration depth of the subducting lithosphere, the subduction zone geometry underlying the trench, the arctrench gap, etc.The study also describes how different seismogenic sources are identified in the region, estimation of moment release rate and deformation pattern. The region is divided into broad seismogenic belts. Based on these previous studies and seismicity Pattern, we identified several broad distinct seismogenic belts/sources. These are l) the Outer arc region consisting of Andaman-Nicobar islands 2) the back-arc Andaman Sea 3)The Sumatran fault zone(SFZ)4)Java onshore region termed as Jave Fault Zone(JFZ)5)Sumatran fore arc silver plate consisting of Mentawai fault(MFZ)6) The offshore java fore arc region 7)The Sunda Strait region.As the Seismicity is variable,it is difficult to demarcate individual seismogenic sources.Hence, we employed a moving window method having a window length of 3—4° and with 50% overlapping starting from one end to the other. We succeeded in defining 4 sources each in the Andaman fore arc and Back arc region, 9 such sources (moving windows) in the Sumatran Fault zone (SFZ), 9 sources in the offshore SFZ region and 7 sources in the offshore Java region. Because of the low seismicity along JFZ, it is separated into three seismogenic sources namely West Java, Central Java and East Java. The Sunda strait is considered as a single seismogenic source.The deformation rates for each of the seismogenic zones have been computed. A detailed error analysis of velocity tensors using Monte—Carlo simulation method has been carried out in order to obtain uncertainties. The eigen values and the respective eigen vectors of the velocity tensor are computed to analyze the actual deformation pattem for different zones. The results obtained have been discussed in the light of regional tectonics, and their implications in terms of geodynamics have been enumerated.ln the light of recent major earthquakes (26th December 2004 and 28th March 2005 events) and the ongoing seismic activity, we have recalculated the variation in the crustal deformation rates prior and after these earthquakes in Andaman—Sumatra region including the data up to 2005 and the significant results has been presented.ln this chapter, the down going lithosphere along the subduction zone is modeled using the free air gravity data by taking into consideration the thickness of the crustal layer, the thickness of the subducting slab, sediment thickness, presence of volcanism, the proximity of the continental crust etc. Here a systematic and detailed gravity interpretation constrained by seismicity and seismic data in the Andaman arc and the Andaman Sea region in order to delineate the crustal structure and density heterogeneities a Io nagnd across the arc and its correlation with the seismogenic behaviour is presented.

Analysis and regeneration of hypermedia contents through Java and XML tools

This paper presents a tool for the analysis and regeneration of Web contents, implemented through XML and Java. At the moment, the Web content delivery from server to clients is carried out without taking into account clients' characteristics. Heterogeneous and diverse characteristics, such as user's preferences, different capacities of the client's devices, different types of access, state of the network and current load on the server, directly affect the behavior of Web services. On the other hand, the growing use of multimedia objects in the design of Web contents is made without taking into account this diversity and heterogeneity. It affects, even more, the appropriate content delivery. Thus, the objective of the presented tool is the treatment of Web pages taking into account the mentioned heterogeneity and adapting contents in order to improve the performance on the Web

Jmodels: Java models of earth system regulation

The JModel suite consists of a number of models of aspects of the Earth System. They can all be run from the JModels website. They are written in the Java language for maximum portability, and are capable of running on most computing platforms including Windows, MacOS and Unix/Linux. The models are controlled via graphical user interfaces (GUI), so no knowledge of computer programming is required to run them. The models currently available from the JModels website are: Ocean phosphorus cycle Ocean nitrogen and phosphorus cycles Ocean silicon and phosphorus cycles Ocean and atmosphere carbon cycle Energy radiation balance model (under development) The main purpose of the models is to investigate how material and energy cycles of the Earth system are regulated and controlled by different feedbacks. While the central focus is on these feedbacks and Earth System stabilisation, the models can also be used in other ways. These resources have been developed by: National Oceanography Centre, Southampton project led by Toby Tyrrell and Andrew Yool, focus on how the Earth system works.