Resposta diferencial de cultivares de algodão ao manganês em solução nutritiva

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reciclagem de poliestireno expandido: compósito com fibras de algodão para a confecção de placas de circuito impresso

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties

Seletividade do clomazone em sementes de algodão tratadas com dietholate e acetato de zinco

The objective of this study objective was to evaluate the selectivity of pre-emergence applications the herbicide clomazone cotton seeds treated with dietholate and zinc acetate. The 4 x 2 factorial arrangement was adopted (4 seed treatment methods and 2 clomazone dosages), distributed in a randomized block design with 4 repetitions. In treatments where dietholate and zinc acetate were applied, rates of 0.4 kg ha(-1) and 8 ml per kg of seeds were used respectively. The clomazone rates used refer to 0.8 and 1.0 kg ha(-1). The cotton cultivar used was the Fiber Max 966 LL. Independent of treatment, all seeds were treated with tiametoxam insecticide and fludioxonil + metalaxyl-M fungicide at rates of 2.24 and 0.08 + 0.03 g per kg of seed, respectively, to control pests early and limit losses caused by pathogens in germination and seedling emergence. Dietholate and zinc acetate treatment had greater initial effect on cotton plants at 21, 30 and 45 days after application. In phytointoxication symptoms were observed for treatment with dietholate and zinc acetate during the evaluation periods. Seeds treated with dietholate, dietholate and zinc acetate or zinc acetate alone provided a higher number of bolls and seed cotton production compared to the control.

Estado nutricional e produtividade de algodoeiro em função de diferentes espaçamentos e aplicação de regulador de crescimento

Strategies of cotton growth as row spacing and use of growth regulator are efficient when the knowledge of crop production potential as well as the amounts of nutrients content. The objective of this study was to evaluate the nutritional status of cotton DeltaOpal cultivar through leaf analysis of macronutrient, chlorophyll index and yield in relation to plant arrangement and managements of the growth regulator. The treatments consisted of plant arrangement: arrangement 1: 88,900 plant ha(-1) and row spacing at 0.9m, arrangement 2: 114,300 plant ha(-1) and row spacing at 0.7m, arrangement 3: 178,000 plant ha(-1) and row spacing at 0.45m; management of growth regulator (mepiquat chloride) at 1.0 L ha(-1) dose, concentration was50g L-1: a-no regulator application; b-single application at 70 days after emergency (d.a.e.); c-split application into four stages (35, 45, 55, and 65 d.a.e.). The reading reviews SPAD chlorophyll, leaf analysis of macronutrients and cotton yield were conducted in three agricultural years 2006/07, 2007/08 and 2008/09, under the experimental design of completely randomized blocks, in a 3x3 factorial scheme totaling up nine treatments with four replications. The reduction of row spacing and increasing plant density gives less absorption of potassium and sulfur by cotton crop. A single application of mepiquat chloride increase calcium leaf content. The split application of mepiquat chloride provides increased SPAD reading index, higher foliar magnesium concentration and highest seed cotton yield.

Influência do espaçamento do feixe de laser Nd: YAG na obtenção de óxidos e nitretos na superfície do titânio em pressão atmosférica

Neste trabalho investigou-se a modificação de superfície do titânio pela irradiação com feixe de Laser Nd:YAG. Os parâmetros do laser como a potência, o comprimento de onda, a frequência, a velocidade de varredura e a área de exposição foram mantidos constantes, exceto o espaçamento da matriz, o qual foi de 0,01 e 0,02 mm. A caracterização da superfície foi realizada por Microscopia Eletrônica de Varredura (MEV) e Difração de Raios X (DRX), sendo que os espectros foram refinados pelo método Rietveld. Pela análise de MEV, observou-se uma mudança na topografia, obtendo uma superfície rugosa produzida pelo fenômeno de ablação. As análises por Rietveld dos espectros de difração de raios X detectaram TiN, Ti2N, TiO2 (anatásio e rutilo), sendo que a amostra com espaçamento 0,01 mm apresentou uma maior quantidade de óxidos e nitretos. Isso pode ser devido à sobreposição do feixe, induzindo à formação de uma superfície com maior estabilidade termodinâmica. Os óxidos e nitretos obtidos são de grande importância, pois são responsáveis por produzir uma maior interação entre o osso-implante.

Distribuição espacial, plano de amostragem sequencial e dinâmica populacional de Anthonomus grandis Boheman (Coleoptera: Curculionidae) em algodoeiro

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Milho, amido ou caroço de algodão associados à glicerina bruta em dietas para ovinos

Pós-graduação em Zootecnia - FCAV

Avaliação econômica da substituição do farelo de soja por farelo de algodão em dietas práticas para tilápias do Nilo cultivadas em tanques-rede

Based on fish production performance, this study assessed the feasibility of replacing SBM with CSM in practical diets for cage-raised Nile tilapia during the finishing phase. To accomplish this research, four isoproteic (32% CP) and isoenergetic (2500 Kcal/kg of DE) diets were formulated. Control diet (T1) contained 30 % of SBM and 0% of CSM. The other three diets contained: 20% of SBM and 10% of CSM (T2), 10% of SBM and 20% of CSM (T3) and 0% of SBM and 30% of CSM (T4). Lysine and Methionine deficiency was compensated for with synthetic amino acid (L-lysine and DL- methionine) supplementation. Experimental design was completely randomized with four treatments and four repetitions. Data were analyzed with SAS PROC GLM through co-variance analysis, adding initial mean weight as a co-variable, followed by Dunnett test. The system used to calculate the profit part was Partial Budget Analysis in Aquaculture, proposed by Shang (1990). Profit was significantly different at T3 when compared to T1 (control). It was concluded that the addition of 20% of CSM to finishing diets can improve cage-raised Nile tilapia profitability.

Avaliação energética econômica do agroecossistema algodão: uma abordagem entre sistemas familiares de produção do Paraguai e do Brasil

The objective of this work was to evaluate the energy and economic efficiency indexes per unit of cotton agro-ecosystem area in family production systems of Paraguay and Brazil; and, to establish a relationship between the energy and economic. Typologies presented by the Program to Support Small Cotton Holdings (Paraguay), and by the National Program for Strengthening Family Agriculture (Brazil). Family systems of the two countries were identified; these are located from Paraguay (San Juan–CA) and from Brazil (Leme–SP). To construct the energy expenditure structure of the cotton agro-ecosystem, as well as to assess the economic efficiency, the mean values obtained were considered, when they presented similarities in production systems and they were within the typology proposed in this study. From the technical itinerary observed the Paraguayan agro-ecosystem depended (fossil fuel 56.76%) and industrial source (35.99%). Thus, the energy balance of the agricultural stage was established, which attained a value of 17,740.69 MJ ha-1; an energy efficiency of 5.28, and a cultural efficiency of 3.04. The Brazilian agro-ecosystem depended on energy from industrial source (insecticides 39.82%) and from fossil fuel (33.59%); it reached an energy balance of 19,547.88 MJ ha-1; an energy efficiency of 2.12, and a cultural efficiency index of 0.71. In the economic and energy indicator ratio, with regard to the months referring to the harvest time, that is to say, March, April, and May, the maximum economic efficiency indicator of paraguay was attained in the month of May (1,00), and from Brazil in the month of May (1,71). Both production systems analyzed were presented efficient, however, dependent of external circumstances and non-renewable energy sources.

Valiação energética e econômica do agroecossistema algodão: uma abordagem entre sistemas familiares de produção do Paraguai e Brasil

The objective of this work was to evaluate the energy and economic efficiency indexes per unit of cotton agro-ecosystem area in family production systems of Paraguay and Brazil; and, to establish a relationship between the energy and economic. Typologies presented by the Program to Support Small Cotton Holdings (Paraguay), and by the National Program for Strengthening Family Agriculture (Brazil). Family systems of the two countries were identified; these are located from Paraguay (San Juan–CA) and from Brazil (Leme–SP). To construct the energy expenditure structure of the cotton agro-ecosystem, as well as to assess the economic efficiency, the mean values obtained were considered, when they presented similarities in production systems and they were within the typology proposed in this study. From the technical itinerary observed the Paraguayan agro-ecosystem depended (fossil fuel 56.76%) and industrial source (35.99%). Thus, the energy balance of the agricultural stage was established, which attained a value of 17,740.69 MJ ha-1; an energy efficiency of 5.28, and a cultural efficiency of 3.04. The Brazilian agro-ecosystem depended on energy from industrial source (insecticides 39.82%) and from fossil fuel (33.59%); it reached an energy balance of 19,547.88 MJ ha-1; an energy efficiency of 2.12, and a cultural efficiency index of 0.71. In the economic and energy indicator ratio, with regard to the months referring to the harvest time, that is to say, March, April, and May, the maximum economic efficiency indicator of paraguay was attained in the month of May (1,00), and from Brazil in the month of May (1,71). Both production systems analyzed were presented efficient, however, dependent of external circumstances and non-renewable energy sources.

Consumo de combustível de um trator agrícola no preparo do solo para a cultura do algodão irrigado em função da pressão de inflação nos pneus

Currently, the efficiency in field operations and the increased productivity of crops is only possible with the use of agricultural machinery and equipment. This intensification of mechanized activities in agriculture, however, led to higher energy costs on farms mainly in the fuel consumption of agricultural tractors. The objective was to compare the fuel consumption of a tractor on tillage operations for irrigated cotton in semi-arid region varying two tire inflation pressures. The tests were conducted in Maricopa Agricultural Center (MAC), an experimental farm belonging to The University of Arizona using a 4x2 TDA Case tractor equipped with a 88kw autopilot system. The results showed lower values in the hourly fuel consumption by using the minimum tire inflation pressure of 124 kPa for all tillage equipment used.

Imagens aéreas multiespectrais na identificação de zonas de manejo em áreas de algodão para aplicação localizada de insumos

Crop yield is influenced by several factors with variability in time and space that are associated with the variations in the plant vigor. This variability allows the identification of management zones and site-specific applications to manage different regions of the field. The purpose of this study was the use of multispectral image for management zones identification and implications of site-specific application in commercial cotton areas. Multispectral airborne images from three years were used to classify a field into three vegetation classes via the Normalized Difference Vegetation Index (NDVI). The NDVI classes were used to verify the potential differences between plant physical measurements and identify management zones. The cotton plant measurements sampled in 8 repetitions of 10 plants at each NDVI class were Stand Count, Plant Height, Total Nodes and Total Bolls. Statistical analysis was performed with treatments arranged in split plot design with Tukey’s Test at 5% of probability. The images were classified into five NDVI classes to evaluate the relationship between cotton plant measurement results and sampling location across the field. The results have demonstrated the possibility of using multispectral image for management zones identification in cotton areas. The image classification into three NDVI classes showed three different zones in the field with similar characteristics for the studied years. Statistical differences were shown for plant height, total nodes and total bolls between low and high NDVI classes for all years. High NDVI classes contained plants with greater height, total nodes and total bolls compared to low NDVI classes. There was no difference in Stand Count between low and high NDVI classes for the three studied years. The final plant stand was the same between all NDVI classes for 2001 and 2003 as it was expected due to the conventional seeding application with the same rate of seeds for the entire field.

Seletividade de inseticidas a alguns dos inimigos naturais na cultura do algodão

The aim of this work was study the selectivity of insecticides in favor of natural enemies in cotton (Gossypium hirsutum latifolium Hurtch Lr), DeltaOpal cultivar, in the city of Malhada (BA), and to know the associated beneficial fauna. The study was conducted at the agricultural year of 2010/2011. The design was conducted in randomized blocks with six treatments and four replications. The treatments were: (1) Fipronil 200 SC (0.38 L.ha-1); (2) Alphacypermethrin 100 SC (0.30 L.ha-1), (3) Lufenuron 50 EC (0.30 L.ha-1), (4) Imidacloprid 200 SC (0.30 L.ha-1), (5) Methyl parathion 600 EC (1.00 L.ha-1), and (6) control (water). The product was applied 80 days after emergence, and the evaluations were performed one day before application and 1, 7 and 14 days after application (DAA). The samples were taken using the sampling method beating cloth and Moericke traps. Natural enemies were brought to the laboratory for sorting, counting and identification by family. The toxicity of the products ranged according to the group of natural enemies. Imidacloprid is selective to the spiders and insecticides are moderately toxic (Methyl Parathion and Alphacypermethrin: 1 and 14th DAA; Lufenuron: 14th DAA) or toxic (Fipronil and Alphacypermethrin: 7th DAA). Fipronil (1 DAA), Alphacypermethrin (7th DAA) and Methyl  Parathion (14th DAA) are moderately toxic to adult ladybirds. The analyzed insecticides are toxic to the larvae of ladybirds, with more impact until seven days after the application, with the exception of Methyl Parathion classified, as innocuous until this period. The occurrence of 13 families of spiders and 18 families of parasitic Hymenoptera is registered in cotton agroecosystems in the region of Malhada, in the state of Bahia.

Espaçamento e população de plantas na cultura da mamona na safra e safrinha: estudo econômico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Perdas na colheita mecanizada de algodão em variabilidade espacial e em função de velocidades de colheita

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)