Abundância e distribuição sazonal de espécies autóctones de camarões peneídeos no canal de abastecimento do sistema primar de aquicultura orgânica (Laguna de Guaraíras, Tibau do Sul, Rio Grande do Norte, Brasil)

Guaraíras lagoon, located in Tibau do Sul in the eastern littoral of Rio Grande do Norte (Brazil), presents a permanent connection to the sea, which guarantees the occurrence of a rich biodiversity, which includes the autochthonous shrimp species Litopenaeus schmitti, Farfantepenaeus subtilis and Farfantepenaeus brasiliensis. In spite of being subject to a strong human intervention in the last decade, mainly related to the installation of shrimp (Litopenaeus vannamei) farms, the lagoon is still scarcely studied. The present study aims at characterizing the populations of the three autochthonous penaeid shrimp species inhabiting Guaraíras, taking into consideration their abundance and seasonal distribution in the inflow channel of Primar System of Organic Aquaculture (Tibau do Sul, Rio Grande do Norte, Brazil). Twelve monthly samples were carried out from May 2005 to April 2006 with the aid of a circular cast net in the inflow channel, which is daily supplied with water from Guaraíras. Sampling months were grouped in trimesters according to the total pluviosity, thus comprising four trimesters. Water salinity was monitored twice a week and temperature values registered on a daily basis at noon, during the study period. The daily pluviosity data from the municipality of Tibau do Sul were supplied by Empresa de Pesquisa Agropecuária do Rio Grande do Norte (EMPARN). Collected shrimp were identified, weighted, measured and sexed. L. schmitti specimens (0.2 g to 17.8 g) were distributed in 1.3 g weight classes intervals. From the eighth sampling month (December 2005) onwards, males were classified into three categories, in accordance with the development of their petasm: (a) rudimentary petasm, (b) partially formed petasm, and (c) completely formed petasm. Among the ecological variables, rainfall showed the greatest dispersion (s.d.=187.74Rainfall and abundance of L. schmitti were negatively correlated (r = -0.85) whereas its abundance and water salinity were positively correlated (r = 0.63). Among 1,144 collected individuals, 1,127 were L. schmitti, 13 were F. subtilis and 4 were F. brasiliensis, which corresponded to 98.51%, 1.14% and 0.35% of the total of collected individuals. L. schmitti occurred in 100 % of all samples. Differently, the presence of F. subtilis and F. brasiliensis was restricted to 33% and 17% of the collected samples, respectively. The present study confirmed the occurrence of L. schmitti, F. brasiliensis and F. subtilis in Guaraíras. However, this lagoon seems to be primarily inhabited by juvenile Litopenaeus schmitti. The population of L. schmitti analysed showed a seasonal pattern of distribution. In general, in the months of high salinity and absence of rain, the number of individuals was higher than in the wet months. Further studies on the reproductive biology and ecology of L. schmitti, F. brasiliensis and F. subtilis may elucidate questions referring to the abundance, period, and phase of occurrence of these shrimp genera in Guaraíras. Finally, the risks associated to the establishment of L. vannamei in the lagoon provide a novel outlet for studies in this biotope

Variação sazonal da concentração de nutrientes em folhas de bananeiras, no Vale do Ribeira-SP

The Vale do Ribeira, SP, main agricultural activity is the banana crop, which accounts for most of this fruit production in the State of São Paulo. The nutritional balance of the plant is one of the most important factors for the banana plant can complete the cycle and achieve high productivity. Aiming to evaluate the seasonal variation of leaf nutrient concentration in banana plants in Vale do Ribeira-SP, we used the results of 252 chemical analyses of plant tissue, collected from August 2009 to September 2010, in the 18 representative properties for the region, ten cultivated with subgroup Cavendish banana plant and eight of subgroup Prata banana plant. The largest variation between the macronutrient occurred for K and S, and among the micronutrients, especially for Fe and B. In some dates of evaluation, there was a higher leaf concentration of P, K, Ca and Zn, in subgroup Cavendish banana plants, while the subgroup Prata banana plants showed higher leaf concentration, especially of Mn, B and N. Climatic conditions, especially rain, influenced the leaf nutrient content, especially for K, N, S, B and Fe.

Biologia populacional comparada de duas espécies de heliconius (Lepidoptera: Nymphalidae) em um ambiente sazonal de floresta atlântica do nordeste brasileiro

Tropical environments often face strong seasonal variations in climate, such as alternate periods of dry and rain, that may often be important influence in the annual X the organisms lives. Here we assess how population dynamics of two butterfly species (Heliconius erato and Heliconius mepomene) respond to environmental and seasonal variations. A mark-release-recapture study carried out in an Atlantic forest reserve, 15 Km from Natal, Rio Grande do Norte, Brazil, for 3 years, during the dry and rainy season, with three visits weekly done. Information such as species, wing lenght, site of capture, pollen load and phenotype (number of spots) (in H. erato only) were noted for each capture. Seasonal variation exists in capture rates of the two species, with great capture rates during the rainy season. Despite finding differences in the mean density of individuals of the two species among the different collection areas, this difference was only significant between floodplain and central areas, and no influence of seasonality was observed in the mean density between the areas. Seasonality in wing size was only observed for H. erato, with larger wings during the rainy season. Females carried larger pollen loads than males both species, but species were similar. Only males differed seasonally, with larger pollen loads during the rainy season. The distribution of the number of wing spots did not vary between the dry and rainy seasons, and the number of spots in males and females was similar. Therefore, we conclude that there was a strong influence of seasonal variation in the population dynamic of the two Heliconius species, as well as in several aspects of their biology

Avaliação da ocorrência sazonal de percevejos em cinco espécies de maracujazeiro, utilizando dois métodos de amostragem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Variabilidade sazonal no ducto epididimário de codorna doméstica: observações morfológicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Variação sazonal de micronutrientes em folhas de aceroleira (Malpighia emarginata DC.)

Os teores de micronutrientes nas folhas necessários para obter boa produtividade e qualidade de frutos de aceroleira (Malpighia emarginata DC.) e sua variação sazonal são pouco conhecidas. Para melhor entendimento da dinâmica de absorção de nutrientes e o desenvolvimento dessa frutífera avaliaram-se teores foliares de Cu, Fe, Mn e Zn, em seis progênies de aceroleira no período de dezembro de 1999 a outubro de 2000. O estudo foi conduzido na Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) Agroindústria Tropical, em Pacajus, e envolveu 6 progênies (P52, P66, P78, P91, P93 e P97) e 6 épocas de amostragem das folhas (dezembro, fevereiro, abril, junho, agosto e outubro de 2000). A variação sazonal foi confirmada para os teores de Cu, Fe, Mn e Zn nas folhas, enquanto o Zn não sofreu alteração significativa nas progênies consideradas pela pesquisa. Os teores de Cu foram superiores em fevereiro, e os de Fe e Mn em agosto. As progênies apresentaram habilidade diferenciada na manutenção das concentrações de Cu, Mn e Zn nas folhas. A melhor época para amostragem de folhas e diagnóstico do estado nutricional foi em outubro, início do florescimento das aceroleiras, quando os teores de Cu, Fe, Mn e Zn devem ser superiores a 3, 125, 80 e 15 mg/kg.

Comparação de alguns modelos matemáticos para ajuste à curva de lactação média de um rebanho da raça Caracu

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparação de alguns modelos matemáticos para o ajuste às curvas de lactação individuais de vacas da raça Caracu

Foram ajustadas 7239 curvas de lactação de vacas Caracu, controladas semanalmente entre os anos de 1978 a 1988, pertencentes à Fazenda Chiqueirão, Poços de Caldas, MG. As funções utilizadas foram a linear hiperbólica (FLH), a quadrática logarítmica (FQL), a gama incompleta (FGI) e a polinomial inversa (FPI). Os parâmetros foram estimados por meio de regressões não lineares, usando-se processos iterativos. A verificação da qualidade do ajuste baseou-se no coeficiente de determinação ajustado (R²A), no teste de Durbin-Watson (DW) e nas médias e desvios-padrão estimados para os parâmetros e funções dos parâmetros dos modelos. Para a curva média, os R²A foram superiores a 0,90 para todas as funções. Bons ajustes, baseados nos R²A>0,80 foram obtidos, respectivamente, por 25,2%, 39,1%, 31,1% e 28,4% das lactações ajustadas pelas funções FLH, FQL, FGI e FPI. de acordo com o teste de DW, bons ajustes foram proporcionados para 29,4% das lactações ajustadas pela FLH, 54,9% pela FQL, 34,9% pela FGI e 29,6% pela FPI. Para ambos os critérios, a FQL foi superior às demais funções, indicando grande variação nas formas das curvas de lactação geradas pelos ajustes individuais. Curvas atípicas foram estimadas pelas funções, com picos ocorrendo antes do parto e algumas vezes após o término da lactação. Todas as funções apresentaram problemas quando ajustaram dados individuais.

Ajuste automático e otimização do tempo de espera (Idle time) em bombeio mecânico de petróleo

The present work presents an algorithm proposal, which aims for controlling and improving idle time to be applied in oil production wells equipped with beam pump. The algorithm was totally designed based on existing papers and data acquired from two Potiguar Basin pilot wells. Oil engineering concepts such as submergence, pump off, Basic Sediments and Water (BSW), Inflow Performance Relationship (IPR), reservo ir pressure, inflow pressure, among others, were included into the algorithm through a mathematical treatment developed from a typical well and then extended to the general cases. The optimization will increase the well production potential maximum utilization having the smallest number of pumping unit cycles directly reflecting on operational cost and electricity consumption reduction

Desenvolvimento de um rastreador solar do tipo polar com ajuste do ângulo de inclinação

The use of solar energy for electricity generation has shown a growing interest in recent years. Generally, the conversion of solar energy into electricity is made by PV modules installed on fixed structures, with slope determined by the latitude of the installation site. In this sense, the use of mobile structures with solar tracking, has enabled increased production of the generated energy. However, the performance of these structures depends on the type of tracker and the position control used. In this work, it is proposed position control a strategy applied for a solar tracker, which will be installed in Laboratory of Power Electronics and Renewable Energy (LEPER), located in the Federal University of Rio Grande do Norte (UFRN). The tracker system is of polar type with daily positioning east-west and tilt angle manual adjustment in the seasonal periods, from north to south

Remoção de hidrocarbonetos do gás natural visando o ajuste do índice de metano

The use of the natural gas is growing year after year in the whole world and also in Brazil. It is verified that in the last five years the profile of natural gas consumption reached a great advance and investments had been carried through in this area. In the oil industry, the use of the natural gas for fuel in the drive of engines is usual for a long date. It is also used to put into motion equipment, or still, to generate electric power. Such engines are based on the motor cycle of combustion Otto, who requires a natural gas with well definite specification, conferring characteristic anti-detonating necessary to the equipment performance for projects based on this cycle. In this work, process routes and thermodynamic conditions had been selected and evaluated. Based on simulation assays carried out in commercial simulators the content of the methane index of the effluent gas were evaluated at various ranges of pressure, temperature, flowrate, molecular weight and chemical nature and composition of the absorbent. As final result, it was established a route based on process efficiency, optimized consumption of energy and absorbent. Thereby, it serves as base for the compact equipment conception to be used in locu into the industry for the removal of hydrocarbon from the natural gas produced

Variação sazonal da abundância de Ecballocystis pulvinata Bohlin em um riacho da região centro-sul do estado do Paraná

Seasonal variation of abundance of Ecballocystis pulvinata Bohlin in a stream of central-southern region of Parana State. The temporal dynamics of E. pulvinata and its relation to abiotic variables were evaluated monthly during January to December 2007 in a stream located in the central-southern part of Parana State (25 degrees 11'16 '' S - 51 degrees 021'25 '' W). The abundance of the population in terms of percentage cover was obtained by means of the quadrat technique and the following stream water variables were measured: current velocity, irradiance, depth, substrate type, temperature, oxygen saturation, conductivity, pH and turbidity. The abundance of E. pulvinata was considered high (X = 26.7%), with more development (22-46%) during autumn/winter. The low values (0-0.08) of niche width and the few associations with environmental variables shows that the population evaluated is a generalist with regards to the environment in which it occurs. Factors most strictly related were the water flow and the particle size of the substrate, which positively correlated to the seasonal pattern of the population investigated.

Estratégias para ajuste do ciclo vigília-sono de adolescentes aos horários escolares matutinos: a educação sobre o sono e a exposição a luz solar

In adolescents, who tend to sleep and wake-up later, the school schedule in the morning is associated with sleep advancement and shortening besides bedtime and wake-up time irregularity between week and weekend days. As a result, there is an increase in daytime sleepiness and a drop in cognitive performance that interfer in students performance in classroom. These consequences reinforce the need to evaluate alternatives that help the adolescent to adapt their sleep needs to the time of start of classes in the morning. Accordingly, the general aim of this study was to evaluate the effects of a sleep program education and sunlight exposure in early morning on sleep-wake cycle (SWC) and daytime sleepiness of adolescents. The students chronotype were evaluated by the Horne-Ostberg questionnaire and the health and usual sleep habits by "the health and the sleep questionnaire. The SWC patterns were assessed by sleep log, the daytime sleepiness by Karolinska Sleepiness Scale (KSS) and the alertness by the Psychomotor Vigilance Test (PVT). These parameters were compared before and after a sleep education program and before and during the sunlight exposure. The sleep program was effective in increasing sleep knowledge of adolescents, in promoting a reduction of bedtime and wake-up time irregularity and increasing the sleep duration in school days. The sunlight exposure effect was evaluated in the return to classes after vacation due to the difference in sleep patterns between school and vacation days. During the intervention week it was observed an advance of sleep schedules, an increase on sleep duration and alertness at the end of the morning. Assessed separately, sleep education and sunlight exposure should contribute to minimize adolescents partial sleep deprivation, but daytime sleepiness effect must be better investigated. These strategies should be used jointly by school members to improve health and performance of their students

Ecologia alimentar e comportamento de forrageamento de Ameivula aff. ocellifera (Squamata: Teiidae) em área de caatinga do nordeste do Brasil

This study investigated the influence of intrinsic and extrinsic factors on the feeding ecology and foraging behavior of the whiptail lizard Ameivula aff. ocellifera, a new species widely distributed in the Brazilian Caatinga, and that is in process of description. In attendance to the objectives, the Dissertation was structured in two chapters, which correspond to scientific articles, one already published and the other to be submitted for publication. In Chapter 1 were analyzed the general diet composition, the relationship between lizard size and prey size, and the occurrence of sexual and ontogenetic differences in the diet. Chapter 2 contemplates a seasonal analysis of diet composition during two rainy seasons interspersed with a dry season, and the quantitative analysis of foraging behavior during two distinct periods. The diet composition was determined through stomach analysis of lizards (N = 111) collected monthly by active search, between September 2008 and August 2010, in the Estação Ecológica do Seridó (ESEC Seridó), state of Rio Grande do Norte. Foraging behavior was investigated during a rainy and a dry month of 2012 also in ESEC Seridó, by determining percent of time moving (PTM), number of movements per minute (MPM) and prey capture rate by the lizards (N = 28) during foraging. The main prey category in the diet of Ameivula aff. ocellifera was Insect larvae, followed by Orthoptera, Coleoptera and Araneae. Termites (Isoptera) were important only in numeric terms, having negligible volumetric contribution (<2%) and low frequency of occurrence, an uncommon feature among whiptail lizards. Males and females did not differ neither in diet composition nor in foraging behavior. Adults and juveniles ingested similar prey types, but differed in prey size. Maximum and minimum prey sizes were positively correlated with lizard body size, suggesting that in this population individuals experience an ontogenetic change in diet, eating larger prey items while growing, and at the same time excluding smaller ones. The diet showed significant seasonal differences; during the two rainy seasons (2009 and 2010), the predominant prey in diet were Insect larvae, Coleoptera and Orthoptera, while in the dry season the predominant prey were Insect larvae, Hemiptera, Araneae and Orthoptera. The degree of mobility of consumed prey during the rainy seasons was lower, mainly due to a greater consumption of larvae (highly sedentary prey) during these periods. Population niche breadth was higher in the dry season, confirming the theoretical prediction that when food is scarce, the diets tend to be more generalized. Considering the entire sample, Ameivula aff. ocellifera showed 61,0 ± 15,0% PTM, 2,03 ± 0,30 MPM, and captured 0,13 ± 0,14 per minute. Foraging mode was similar to that found for other whiptail lizards regarding PTM, but MPM was relatively superior. Seasonal differences were verified for PTM, which was significantly higher in the rainy season (66,4 ± 12,1) than in the dry season (51,5 ± 15,6). It is possible that this difference represents a behavioral adjustment in response to seasonal variation in the abundance and types of prey available in the environment in each season

Influência da técnica de fabricação e dos materiais sobre o ajuste da interface pilar/implante em infraestruturas implantossuportadas

The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology