Reaction Control in Quiescent Systems of Free-Radical Retrograde-Precipitation Polymerization

Free-radical retrograde-precipitation polymerization, FRRPP in short, is a novel polymerization process discovered by Dr. Gerard Caneba in the late 1980s. The current study is aimed at gaining a better understanding of the reaction mechanism of the FRRPP and its thermodynamically-driven features that are predominant in controlling the chain reaction. A previously developed mathematical model to represent free radical polymerization kinetics was used to simulate a classic bulk polymerization system from the literature. Unlike other existing models, such a sparse-matrix-based representation allows one to explicitly accommodate the chain length dependent kinetic parameters. Extrapolating from the past results, mixing was experimentally shown to be exerting a significant influence on reaction control in FRRPP systems. Mixing alone drives the otherwise severely diffusion-controlled reaction propagation in phase-separated polymer domains. Therefore, in a quiescent system, in the absence of mixing, it is possible to retard the growth of phase-separated domains, thus producing isolated polymer nanoparticles (globules). Such a diffusion-controlled, self-limiting phenomenon of chain growth was also observed using time-resolved small angle x-ray scattering studies of reaction kinetics in quiescent systems of FRRPP. Combining the concept of self-limiting chain growth in quiescent FRRPP systems with spatioselective reaction initiation of lithography, microgel structures were synthesized in a single step, without the use of molds or additives. Hard x-rays from the bending magnet radiation of a synchrotron were used as an initiation source, instead of the more statistally-oriented chemical initiators. Such a spatially-defined reaction was shown to be self-limiting to the irradiated regions following a polymerization-induced self-assembly phenomenon. The pattern transfer aspects of this technique were, therefore, studied in the FRRP polymerization of N-isopropylacrylamide (NIPAm) and methacrylic acid (MAA), a thermoreversible and ionic hydrogel, respectively. Reaction temperature increases the contrast between the exposed and unexposed zones of the formed microgels, while the irradiation dose is directly proportional to the extent of phase separation. The response of Poly (NIPAm) microgels prepared from the technique described in this study was also characterized by small angle neutron scattering.

The Integration of Formal and Non-formal Education: The Dutch “brede school”

The Dutch “brede school” (BS) development originates in the 1990s and has spread unevenly since: quicker in the primary than secondary educational sector. In 2007, there were about 1000 primary and 350 secondary BS schools and it is the intention of the government as well as the individual municipalities to extend that number and make the BS the dominant school form of the near future. In the primary sector, a BS cooperates with crèche and preschool facilities, besides possible other neighborhood partners. The main targets are, first, to enhance educational opportunities, particularly for children with little (western-) cultural capital, and secondly to increase women’s labor market participation by providing extra familial care for babies and small children. All primary schools are now obliged to provide such care. In the secondary sector, a BS is less neighborhood-orientated than a primary BS because those schools are bigger and more often located in different buildings. As in the primary sector, there are broad and more narrow BS, the first profile cooperating with many non-formal and other partners and facilities and the second with few. On the whole, there is a wide variety of BS schools, with different profiles and objectives, dependent on the needs and wishes of the initiators and the neighborhood. A BS is always the result of initiatives of the respective school and its partners: parents, other neighborhood associations, municipality etc. BS schools are not enforced by the government although the general trend will be that existing school organizations transform into BS. The integration of formal and non-formal education and learning is more advanced in primary than secondary schools. In secondary education, vocational as well as general, there is a clear dominance of formal education; the non-formal curriculum serves mainly two lines and objectives: first, provide attractive leisure activities and second provide compensatory courses and support for under-achievers who are often students with migrant background. In both sectors, primary and secondary, it is the formal school organization with its professionals which determines the character of a BS; there is no full integration of formal and non-formal education resulting in one non-disruptive learning trajectory, nor is there the intention to go in that direction. Non-formal pedagogues are partly professionals, like youth- and social workers, partly volunteers, like parents, partly non-educational partners, like school-police, psycho-medical help or commercial leisure providers. Besides that, the BS is regarded by government educational and social policy as a potential partner and anchor for community development. It is too early to make reliable statements about the effects of the BS movement in the Netherlands concerning the educational opportunities for disadvantaged children and their families, especially those with migrant background, and combat further segregation. Evaluation studies made so far are moderately positive but also point to problems of overly bureaucratized structures and layers, lack of sufficient financial resources and, again, are uncertain about long-term effects.

Individual risk factors for Mycoplasma hyopneumoniae infections in suckling pigs at the age of weaning.

BACKGROUND In recent years, the occurrence and the relevance of Mycoplasma hyopneumoniae infections in suckling pigs has been examined in several studies. Whereas most of these studies were focused on sole prevalence estimation within different age groups, follow-up of infected piglets or assessment of pathological findings, none of the studies included a detailed analysis of individual and environmental risk factors. Therefore, the aim of the present study was to investigate the frequency of M. hyopneumoniae infections in suckling pigs of endemically infected herds and to identify individual risk factors potentially influencing the infection status of suckling pigs at the age of weaning. RESULTS The animal level prevalence of M. hyopneumoniae infections in suckling pigs examined in three conventional pig breeding herds was 3.6% (41/1127) at the time of weaning. A prevalence of 1.2% was found in the same pigs at the end of their nursery period. In a multivariable Poisson regression model it was found that incidence rate ratios (IRR) for suckling pigs are significantly lower than 1 when teeth grinding was conducted (IRR: 0.10). Moreover, high temperatures in the piglet nest during the first two weeks of life (occasionally >40°C) were associated with a decrease of the probability of an infection (IRR: 0.23-0.40). Contrary, the application of PCV2 vaccines to piglets was associated with an increased infection risk (IRR: 9.72). CONCLUSIONS Since single infected piglets are supposed to act as initiators for the transmission of this pathogen in nursery and fattening pigs, the elimination of the risk factors described in this study should help to reduce the incidence rate of M. hyopneumoniae infections and thereby might contribute to a reduced probability of high prevalences in older pigs.

Interruptions in Workflow for RNs in a Level One Trauma Center

An understanding of interruptions in healthcare is important for the design, implementation, and evaluation of health information systems and for the management of clinical workflow and medical errors. The purpose of this study is to identify and classify the types of interruptions experienced by Emergency Department(ED) nurses working in a Level One Trauma Center. This was an observational field study of Registered Nurses (RNs) employed in a Level One Trauma Center using the shadowing method. Results of the study indicate that nurses were both recipients and initiators of interruptions. Telephones, pagers, and face-to-face conversations were the most common sources of interruptions. Unlike other industries, the healthcare community has not systematically studied interruptions in clinical settings to determine and weigh the necessity of the interruption against their sometimes negative results such as medical errors, decreased efficiency, and increased costs. Our study presented here is an initial step to understand the nature, causes, and effects of interruptions, thereby improving both the quality of healthcare and patient safety. We developed an ethnographic data collection technique and a data coding method for the capturing and analysis of interruptions. The interruption data we collected are systematic, comprehensive, and close to exhaustive. They confirmed the findings from earlier studies by other researchers that interruptions are frequent events in critical care and other healthcare settings. We are currently using these data to analyze the workflow dynamics of ED clinicians, to identify the bottlenecks of information flow, and to develop interventions to improve the efficiency of emergency care through the management of interruptions.

Interruptions in workflow for RNs in a Level One Trauma Center.

An understanding of interruptions in healthcare is important for the design, implementation, and evaluation of health information systems and for the management of clinical workflow and medical errors. The purpose of this study is to identify and classify the types of interruptions experienced by ED nurses working in a Level One Trauma Center. This was an observational field study of Registered Nurses employed in a Level One Trauma Center using the shadowing method. Results of the study indicate that nurses were both recipients and initiators of interruptions. Telephone, pagers, and face-to-face conversations were the most common sources of interruptions. Unlike other industries, the outcomes caused by interruptions resulting in medical errors, decreased efficiency and increased cost have not been systematically studied in healthcare. Our study presented here is an initial step to understand the nature, causes, and effects of interruptions, and to develop interventions to manage interruptions to improve healthcare quality and patient safety. We developed an ethnographic data collection technique and a data coding method for the capturing and analysis of interruptions. The interruption data we collected are systematic, comprehensive, and close to exhaustive. They confirmed the findings from early studies by other researchers that interruptions are frequent events in critical care and other healthcare settings. We are currently using these data to analyze the workflow dynamics of ED clinicians, identify the bottlenecks of information flow, and develop interventions to improve the efficiency of emergency care through the management of interruptions.

The Europeanization of Swiss Decision-Making Processes

Europeanization has been at the core of two research projects on decision-making processes in Switzerland that we carried out over the last decade. Interestingly enough, Europeanization was initially not supposed to be the central focus of these projects: The first was broader in scope, as it dealt with the effects of globalization and internationalization, and the second was agnostic with respect to Europeanization – it looked at the characteristics of the most important decision-making processes and structures in contemporary Switzerland, and at the related changes that have taken place since the 1970s. However, in both projects Europeanization has imposed itself as a crucial variable, if not as the most crucial variable. We use insights from these two research projects – and from a database on the legislative acts of the 1995-2006 period that emerged from these projects – to address the questions raised by the initiators of this debate and, more especially, to highlight what effects Europeanization has on decision-making processes and related power and conflict structures among actors.

Comparison against 186 canid whole genome sequences reveals survival strategies of an ancient clonally transmissible canine tumor.

Canine transmissible venereal tumor (CTVT) is a parasitic cancer clone that has propagated for thousands of years via sexual transfer of malignant cells. Little is understood about the mechanisms that converted an ancient tumor into the world's oldest known continuously propagating somatic cell lineage. We created the largest existing catalog of canine genome-wide variation and compared it against two CTVT genome sequences, thereby separating alleles derived from the founder's genome from somatic drivers of clonal transmissibility. We show that CTVT has undergone continuous adaptation to its transmissible allograft niche, with overlapping mutations at every step of immunosurveillance, particularly self-antigen presentation and apoptosis. We also identified chronologically early somatic mutations in oncogenesis- and immune-related genes that may represent key initiators of clonal transmissibility. Thus, we provide the first insights into the specific genomic aberrations that underlie CTVT's dogged perseverance in canids around the world.

Mechanical Characterization of Multicrystalline Silicon Substrates for Solar Cell Applications

The possibility of using more economical silicon feedstock, i.e. as support for epitaxial solar cells, is of interest when the cost reduction and the properties are attractive. We have investigated the mechanical behaviour of two blocks of upgraded metallurgical silicon, which is known to present high content of impurities even after being purified by the directional solidification process. These impurities are mainly metals like Al and silicon compounds. Thus, it is important to characterize their effect in order to improve cell performance and to ensure the survival of the wafers throughout the solar value chain. Microstructure and mechanical properties were studied by means of ring on ring and three point bending tests. Additionally, elastic modulus and fracture toughness were measured. These results showed that it is possible to obtain marked improvements in toughness when impurities act as microscopic internal crack arrestors. However, the same impurities can be initiators of damage due to residual thermal stresses introduced during the crystallization process.

Mechanical characterization of multicrystalline silicon wafers

The possibility of using more economical silicon feedstock, i.e. as support for epitaxial solar cells, is of interest when the cost reduction and the properties are attractive. We have investigated the mechanical behavior of two blocks of upgraded metallurgical silicon, which is known to present high content of impurities even after being purified by the directional solidification process. The impurities are mainly metals like Al and silicon compounds. Thus, it is important to characterize their effect in order to improve cell performance and to ensure the survival of the wafers throughout the solar value chain. Microstructure and mechanical properties were studied by means of ring on ring and three point bending tests. Additionally, Young’s modulus, hardness and fracture toughness were measured. These results showed that it is possible to obtain marked improvements in toughness when impurities act as microscopic internal crack arrestors. However, the same impurities can be initiators of damage due to residual thermal stresses introduced during the crystallization process.

Suppression of gene silencing: A general strategy used by diverse DNA and RNA viruses of plants

In transgenic and nontransgenic plants, viruses are both initiators and targets of a defense mechanism that is similar to posttranscriptional gene silencing (PTGS). Recently, it was found that potyviruses and cucumoviruses encode pathogenicity determinants that suppress this defense mechanism. Here, we test diverse virus types for the ability to suppress PTGS. Nicotiana benthamiana exhibiting PTGS of a green fluorescent protein transgene were infected with a range of unrelated viruses and various potato virus X vectors producing viral pathogenicity factors. Upon infection, suppression of PTGS was assessed in planta through reactivation of green fluorescence and confirmed by molecular analysis. These experiments led to the identification of three suppressors of PTGS and showed that suppression of PTGS is widely used as a counter-defense strategy by DNA and RNA viruses. However, the spatial pattern and degree of suppression varied extensively between viruses. At one extreme, there are viruses that suppress in all tissues of all infected leaves, whereas others are able to suppress only in the veins of new emerging leaves. This variation existed even between closely related members of the potexvirus group. Collectively, these results suggest that virus-encoded suppressors of gene silencing have distinct modes of action, are targeted against distinct components of the host gene-silencing machinery, and that there is dynamic evolution of the host and viral components associated with the gene-silencing mechanism.

Theoretical investigation of the [1,2]-sigmatropic hydrogen migration in the mechanism of oxidation of 2-aminobenzoyl-CoA by 2-aminobenzoyl-CoA monooxygenase/reductase

The flavin hydroperoxide at the active site of the mixed-function oxidase 2-aminobenzoyl-CoA monooxygenase/reductase (Azoarcus evansii) transfers an oxygen to the 5-position of the 2-aminobenzoyl-CoA substrate to provide the alkoxide intermediate II−. Hydrogen migration from C5 to C6 follows this monooxygenation. The nature of the monooxygenation intermediate and plausible competing reactions leading to hydrogen migration have been considered. Ab initio molecular orbital theory has been used to calculate structures and electron distributions in intermediate and transition state structures. Electrostatic potential surface calculations establish that the transition state and product, associated with the C5 to C6 hydrogen transfer, are stabilized by electron distribution to the benzoyl-CoA thioester carbonyl oxygen. This is not so for the transition state and product associated with hydrogen transfer from C5 to C4. The activation energy for the 5,6-shift is 2.5 kcal/mol lower than that for the 5,4-shift. In addition, the product of the hydrogen 5,6-shift is more stable than is the product of the hydrogen 5,4-shift, by ≈6 kcal/mol. These results explain why only the shift of hydrogen from C5 to C6 is observed experimentally. Oxygen transfer and hydrogen migration almost coincide in the gas phase (activation energy of ≈0.6 kcal/mol, equivalent to a single bond vibration). Enzymatic formation of alkoxide II− requires its stabilization; thus, the rate constant for its breakdown would be slower than in the gas phase.

NF-kappa B homodimer binding within the HIV-1 initiator region and interactions with TFII-I.

We show that the binding of Rel p50 and p52 homodimers at sites within the transcriptional initiation region of HIV-1 provides for their ability to interact with other proteins that bind the initiator. The binding of one such protein, the initiator protein TFII-I, to the initiation region of HIV-1 is augmented in the presence of Rel p50 and Rel p52 homodimers. Consistent with this, in vitro Rel homodimers potentiate HIV-1 transcription in a manner dependent upon TFII-I. The findings suggest that Rel dimers may regulate HIV-1 transcription in two ways. First, through binding at the kappa B enhancer sites at (-104 to -80), NF-kappa B p50:p65 participates in classical transcriptional activation. Second, Rel dimers such as p50 or p52 might bind at initiator sequences to regulate the de novo binding of components of certain preinitiation complexes. These findings, and the existence of Rel binding sites at the initiators of other genes, suggest roles for Rel proteins in early events determining transcriptional control.

Desenvolvimento de materiais nanoestruturados à base de SiO2-Nb2O5 preparados por uma nova rota sol-gel com aplicações em fotônica

Este trabalho concentra-se na preparação e caracterizações estrutural e espectroscópica de materiais nanoestruturados à base de SiO2-Nb2O5 dopados e codopados com íons Er3+, Yb3+ e Eu3+ na forma de pós e guias de onda planares. Os nanocompósitos foram preparados através de uma nova rota sol-gel utilizando óxido de nióbio como precursor em substituição ao alcóxido de nióbio. A correlação estrutura propriedades luminescentes foi estudada por difração de raios X, microscopia eletrônica de transmissão, espectroscopia vibracional de absorção no infravermelho, espectroscopia vibracional de espalhamento Raman, análise térmica, reflectância difusa e especular, espectroscopia de fotoluminescência e acoplamento M-line. Inicialmente foi avaliado a influência da concentração de nióbio nas propriedades estruturais e luminescentes de nanocompósitos (100-x)Si-xNb dopados e codopados com íons Er3+, Yb3+ e Eu3+ tratados termicamente a 900 °C por 3h. A cristalização do Nb2O5 foi dependente da concentração de Nb na matriz, com a distribuição dos íons lantanídeos preferencialmente no Nb2O5, afetando as propriedades luminescentes. Para os nanocompósitos codopados com íons Er3+ e Yb3+ foram obtidos valores de largura de banda a meia altura (FWHM) da ordem de 70 nm na região de 1550 nm e tempos de vida de até 5,2 ms. A emissão na região do visível, decorrente de processos de conversão ascendente, revelou-se dependente da concentração de nióbio. Foi verificada emissão preferencial na região do verde para menores concentrações de Nb. Enquanto que, para as maiores concentrações, processos de relaxação cruzada levaram a um aumento relativo na intensidade de emissão na região do vermelho. A eficiência quântica de emissão dos nanocompósitos (100-x)Si-xNb dopados com Eu3+ variou com o comprimento de onda de excitação, refletindo os diferentes sítios de simetria ocupados por este íons nesta estrutura complexa. A influência da temperatura de tratamento térmico no processo de cristalização do Nb2O5 em nanocompósitos 70Si:30Nb codopados com íons Er3+ e Yb3+ foi avaliada. Material amorfo foi obtido a 700 °C enquanto que a 900 e 1100 °C foram identificas as fases ortorrômbica (fase T) e monoclínica (fase M) do Nb2O5. Intensa emissão na região de 1550 nm com valores de FWHM de 52 e 67 nm e tempos de vida de 5,6 e 5,4 ms foram verificados a 700 e 900 °C sob excitação em 977 nm, respectivamente. Por fim, foram obtidos guias de onda planares com excelentes propriedades ópticas e com grande potencial de aplicação em dispositivos de amplificação óptica. Especificamente, materiais fotônicos com banda larga de emissão na região do infravermelho foram preparados, indicando fortemente a potencialidade para a aplicação em telecomunicações envolvendo não somente a banda C como também as bandas L e S em materiais contendo somente íons Er3+ como centros emissores.

Organotitanias: a versatile approach for band gap reduction in titania based materials

The reduction of the band gap of titania is critically important to fully utilize its photocatalytic properties. Two main strategies, i.e. doping and partial reduction of Ti(IV), are the main alternatives available to date. Herein, we report a new synthesis strategy based on one-pot co-condensation of in situ prepared polymetallic titanium-alkoxide complexes with titanium tetrabutoxide. Using this direct reaction, it is possible to introduce organic compounds in the anatase phase, causing site distortions in the crystalline structure of the network. By using this strategy, a yellow and a black titania have been produced, with the latter showing a remarkable photocatalytic activity under visible-light.

Mesoporous Metal Complex–Silica Aerogels for Environmentally Friendly Amination of Allylic Alcohols

Two series of mesoporous hybrid iron(III) complex–silica aerogels were prepared in one-pot synthesis by using the sol–gel coordination chemistry approach. The use of the ligands 3-(2-aminoethylamino)propyltrimethoxysilane and 2-(diphenylphosphino)ethyltriethoxysilane, both with terminal triethoxysilyl groups, were used to incorporate metal complexes in situ into the framework of silica, through their co-condensation with a silicon alkoxide during the aerogel formation. This methodology yielded optically translucent hybrid mesoporous gels with homogeneous metal incorporation and excellent textural properties. The catalytic performance of these materials was tested in the direct amination of allylic alcohols in water as a target reaction, with activities comparable or even higher than those corresponding to the homogeneous iron(III) complex. Furthermore, these catalysts were stable and maintained their catalytic activity after six reaction cycles.