Il percorso Ciclabile cantonale della Valle Maggia (Maggia Valley Cantonal Cycleway)

La ferrovia della Valle Maggia, in Canton Ticino, ha operato tra il 1905 ed il 1965 collegando Locarno, sul Verbano, a Bignasco. Il tracciato prevedeva un armamento a scartamento ridotto; il servizio era operato con vetture automotrici dotate di giardiniera o rimorchio per le merci.

Improvement of a dynamic accumulator at ICICS 07 and its application in multi-user keyword-based retrieval on encrypted data

A dynamic accumulator is an algorithm, which merges a large set of elements into a constant-size value such that for an element accumulated, there is a witness confirming that the element was included into the value, with a property that accumulated elements can be dynamically added and deleted into/from the original set. Recently Wang et al. presented a dynamic accumulator for batch updates at ICICS 2007. However, their construction suffers from two serious problems. We analyze them and propose a way to repair their scheme. We use the accumulator to construct a new scheme for common secure indices with conjunctive keyword-based retrieval.

Explaining lower rates of sexual abuse in China

Accumulating research suggests that rates of child sexual abuse are comparatively low in China. This commentary is an effort to evaluate whether it reflects a true lower prevalence or alternatively the effect of inhibited disclosure by victims. We conclude that while some estimates have almost certainly been affected by inhibited disclosure, the overall magnitude of the contrast between Chinese and international rates, particularly for girls, and its consistency with other indicators do suggest a true lower prevalence, although the evidence is equivocal. We discuss some factors that could account for such lower rates including Confucian family values, definitions of masculinity and a collectivist culture that may be protective.

A vibrational spectroscopic study of the silicate mineral normandite – NaCa(Mn2+,Fe2+)(Ti,Nb,Zr)Si2O7(O,F)2

We have studied the mineral normandite using a combination of scanning electron microscopy with energy dispersive spectroscopy and vibrational spectroscopy. The mineral normandite NaCa(Mn2+,Fe2+)(Ti,Nb,Zr)Si2O7(O,F)2 is a crystalline sodium calcium silicate which contains rare earth elements. Chemical analysis shows the mineral contains a range of elements including Na, Mn2+, Ca, Fe2+ and the rare earth element niobium. No Raman bands are observed above 1100 cm−1. The mineral is characterised by Raman bands observed at 724, 748, 782 and 813 cm−1. Infrared bands are broad; nevertheless bands may be resolved at 723, 860, 910, 958, 933, 1057 and 1073 cm−1. Intense Raman bands at 454, 477 and 513 cm−1 are attributed to OSiO bending modes. No Raman bands are observed in the hydroxyl stretching region, but low intensity infrared bands are observed at 3191 and 3450 cm−1. This observation brings into question the true formula of the mineral.

Food literacy

The term 'food literacy' is increasingly being used to describe the knowledge, skills and behaviours needed to feed yourself. In the last five years the use of this specific term has more than tripled in the research literature. The term is now commonly used in food and nutrition policy(Department of Agriculture Fisheries and Forestries, 2013; Glickman, Parker, Sim, Del Valle Cook, & Miller, 2012; Vandenbroeck, Goossens, & Clemens, 2007) and by a range of different industries, including, health, education and sustainable agriculture (Colatruglio, 2015; Piscopo, 2015; Voget-Kleschin, 2014). This article will look at what has led to the emergence of this term and then go on to define it based on the author's own PhD research which involved two studies, one of food experts and one of 16-25 year olds which aimed to identify the components of food literacy.

Structure and magnetotransport properties of the layered manganites REl.2Srl.8Mn,07(R E = La, Pr, Nd)

We have examined the magnetotransport properties and the structure, by Rietveld refinement of powder X-ray data, of the phases RE(1.2)Sr(1.8)Mn(2)O(7) (RE = La, Pr, Nd). We find that on cooling, La1.2Sr1.8Mn2O7 undergoes a transition to a nearly perfect ferromagnet with 90% magnetization at 1.45 T, as reported by earlier workers, but the Pr and Nd phases show only a small magnetization that grows gradually as the temperature is decreased. There seems to be significant correlation between electrical transport and the Jahn-Teller elongation of the apical Mn-O bonds in these systems. The elongation of the apical Mn-O bonds forces the nine-coordinate rock-salt site to be occupied preferentially by the smaller rare-earth-metal cations. This preferential occupation is reliably obtained from the X-ray refinement. All three title phases show a magnetoresistance ratio of about 4(corresponding to a magnetoresistance, [R(0)-R(H)]/R(0), of about 75%) at a field of 7 T and temperatures around 100 K.

A Safe Vaccine (DV-STM-07) against Salmonella Infection Prevents Abortion and Confers Protective Immunity to the Pregnant and New Born Mice

Pregnancy is a transient immuno-compromised condition which has evolved to avoid the immune rejection of the fetus by the maternal immune system. The altered immune response of the pregnant female leads to increased susceptibility to invading pathogens, resulting in abortion and congenital defects of the fetus and a subnormal response to vaccination. Active vaccination during pregnancy may lead to abortion induced by heightened cell mediated immune response. In this study, we have administered the highly attenuated vaccine strain delta pmrG-HM-D (DV-STM-07) in female mice before the onset of pregnancy and followed the immune reaction against challenge with virulent S. Typhimurium in pregnant mice. Here we demonstrate that DV-STM-07 vaccine gives protection against Salmonella in pregnant mice and also prevents Salmonella induced abortion. This protection is conferred by directing the immune response towards Th2 activation and Th1 suppression. The low Th1 response prevents abortion. The use of live attenuated vaccine just before pregnancy carries the risk of transmission to the fetus. We have shown that this vaccine is safe as the vaccine strain is quickly eliminated from the mother and is not transmitted to the fetus. This vaccine also confers immunity to the new born mice of vaccinated mothers. Since there is no evidence of the vaccine candidate reaching the new born mice, we hypothesize that it may be due to trans-colostral transfer of protective anti-Salmonella antibodies. These results suggest that our vaccine DV-STM-07 can be very useful in preventing abortion in the pregnant individuals and confer immunity to the new born. Since there are no such vaccine candidates which can be given to the new born and to the pregnant women, this vaccine holds a very bright future to combat Salmonella induced pregnancy loss.

Photo induced optical changes in Sb/As2S3 multilayered film and (As2S3)(0.93)Sb-0.07 film of equal thickness

The increase in optical band gap (photo bleaching) due to light illumination was studied at room temperature as well as at low (4.2 K) temperature for Sb/As2S3 multilayered film of 640 nm thickness by Fourier Transform Infrared Technique. The interdiffusion of Sb into As2S3 matrix results the formation of Sb-As2S3 ternary solid solutions which is explained by the change in optical band gap (E-g), absorption coefficient (alpha), Tauc parameter (B-1/2), Urbach edge (E-e). At the same time, photo darkening phenomena was observed in (As2S3)(0.93)Sb-0.07 film of same thickness both at low and room temperatures. From our X-ray Photoelectron Spectroscopy measurements,we are able to show that some of the As-As, S-S and Sb-Sb bonds are converted into As-S and S-Sb bonds in case of multilayers. We found that the energetically favoured heteropolar bond formation take place by a phonon-assisted mechanism using the lone pair pi electrons of S-2(0). But in case of (As2S3)(0.93)Sb-0.02 film, the homopolar bonds are playing a major role. (C) 2010 Elsevier B.V. All rights reserved.

Synthesis dependent characteristics of Sr1-xMnxTiO3 (x=0.03, 0.05, 0.07 and 0.09)

Sr1-xMnxTiO3 (where x=0.03, 0.05, 0.07 and 0.09) was synthesized via different routes that include solid-state, oxalate precipitation and freeze drying. In oxalate precipitation technique, compositions corresponding to 3 and 5 mol% doping of Mn were monophasic whereas the higher compositions revealed the presence of the secondary phases such as MnO, Mn3O4 etc., as confirmed by high resolution X-ray diffraction (XRD) studies. The decomposition behavior of the precursors prepared using oxalate precipitation method corresponding to the above mentioned compositions was studied. Nanopowders of compositions pertaining to 5 to 9 mol% of Mn doping were obtained using freeze-drying technique. The average crystallite size of these nanopowders was found to be in the 35 to 65 nm range. The microstructural studies carried out on the sintered ceramics, fabricated using powders synthesized by different routes established the fine grained nature ( < 1 mu m) of the one obtained by freeze drying method. Raman scattering studies were carried out in order to complement the observations made from XRD regarding the phase purity. The dielectric properties of the ceramics obtained by different synthesis routes were studied in the 80-300 K temperature range at 100 kHz and the effect of grain size has been discussed. (C) 2012 Elsevier Inc. All rights reserved.

Memory effect in SrRu(1-x)O3 (0.01 < x < 0.07)

SrRuO3 is widely known to be an itinerant ferromagnet with a T-C similar to 160 K. It is well known that glassy materials exhibit time dependent phenomena such as memory effect due to their generic slow dynamics. However, for the first time, we have observed memory effect in SrRu(1-x)O3 (0.01

Hot deformation behaviour and microstructure control in AlCrCuNiFeCo high entropy alloy

An AlCrCuNiFeCo high entropy alloy (HEA), which has simple face centered cubic (FCC) and body centered cubic (BCC) solid solution phases as the microstructural constituents, was processed and its high temperature deformation behaviour was examined as a function of temperature (700-1030 degrees C) and strain rate (10(-3)-10(-1) s(-1)), so as to identify the optimum thermo-mechanical processing (TMP) conditions for hot working of this alloy. For this purpose, power dissipation efficiency and deformation instability maps utilizing that the dynamic materials model pioneered by Prasad and co-workers have been generated and examined. Various deformation mechanisms, which operate in different temperature-strain rate regimes, were identified with the aid of the maps and complementary microstructural analysis of the deformed specimens. Results indicate two distinct deformation domains within the range of experimental conditions examined, with the combination of 1000 degrees C/10(-3) s(-1) and 1030 degrees C/10(-2) s(-1) being the optimum for hot working. Flow instabilities associated with adiabatic shear banding, or localized plastic flow, and or cracking were found for 700-730 degrees C/10(-3)-10(-1) s(-1) and 750-860 degrees C/10(-1.4)-10(-1) s(-1) combinations. A constitutive equation that describes the flow stress of AlCrCuNiFeCo alloy as a function of strain rate and deformation temperature was also determined. (C) 2014 Elsevier Ltd. All rights reserved.

Identificación macroscópica de patologías hepáticas de mayor prevalencia en bovinos faenados en el matadero PROINCASA, período del 07 de julio del 2010 - enero del 2011

El presente estudio se llevó a cabo para determinar la prevalencia de las patologías macroscópicas en hígados decomisados (condenados) de bovinos faenados en el matadero PROINCASA, identificando las patologías hepáticas mediante la inspección, clasificando los tipos de enfermedades (primarias o secundarias) según las patologías identificadas y determinando las pérdidas económicas representadas por los hígados decomisados. Los datos recopilados se obtuvieron a través de la inspección post mortem de los órganos, en los que se realizó la debida observación, palpación, limpieza y laminado de los mismos. Se utilizó estadística descriptiva con distribuciones de frecuencias a partir de los datos recolectados, se estructuró la base de datos en hoja electrónica Microsoft Excel℗, se realizó un análisis de los datos mediante la prueba de Chi2 (X2), utilizando el programa estadístico SPSS℗, generando tablas de contingencia a una P <0.05. Las variables evaluadas fueron: prevalencia total de patologías, prevalencia de patologías específicas, y pérdidas económicas; con los datos recopilados, se encontró desde el punto de vista general, que el mes con mayor prevalencia de hígados afectados fue septiembre con un 16%, y el mes con menor prevalencia fue julio con 12%; haciendo un análisis individual por patología, el mes con mayor prevalencia de hígados afectados con abscesos fue julio con un 5%, telangiectasia en octubre con un 9%, Ictericia en agosto con un 5% y para adherencia fue octubre con un 8%, del total de hígados con diferentes patologías por mes se obtuvo la mayor prevalencia en octubre con un 56% para abscesos, telangiectasia en octubre con un 70%, ictericia en septiembre con un 26% y adherencia en octubre con un 27%. De un total de 11 286 hígados inspeccionados, 1 555 resultaron afectados, lo que equivale a un 13.78% de afección, a su vez estos representan económicamente la pérdida de C$ 466,500 Córdobas netos.

Comportamiento agronómico por rebrote de seis genotipos de sorgo (Sorghum bicolor L. Moench) bajo dos diferentes dosis de fertilización NPK, en el Valle de Sébaco

Con el objetivo de determinar el potencial de rendimiento de grano por rebrote de seis genotipos de Sorgo (Sorghum bicolor L Moench), sometidos bajo dos diferentes dosis de fertilización NPK, se estableció un experimento de campo en Bloques Completos al Azar con 4 repeticiones en terrenos de la Estación Experimental “Raúl González A.” del Valle de Sebaco. Los resultados obtenidos indican que el hibrido HSN 89 con 6 Ton/Ha, fue el que presento el mayor rendimiento de grano por rebrote, ubicándose en segundo lugar los genotipos H887 v2 y SPV 475 con 4.98 y 4.53 Ton/HA respectivamente. Resultados similares fueron obtenidos en relación al rendimiento total de grano (durante las dos cosechas), con 12.25 Ton/Ha; 10.58 Ton/Ha y 9.90 Ton/Ha respectivamente. El incremento en la fertilización ejercio efecto en el rendimiento de grano obtenido durante el segundo ciclo del cultivo (rebrote), alcanzando los mayores rendimientos de 10.37 Ton/Ha, con la mayor fertilización. En relación a las demás características agronómicas como altura de planta; excersion de panoja; longitud de panoja y Acame, los genotipos se comportaron muy bien, a excepción de la variedad T 43 que mostro un 54% de Acame durante el segundo ciclo del cultivo (rebrote).

Comportamiento agronómico e industrial de cinco variedades de tomate (Lycopersicum esculentum mill) en el valle de Sébaco

El presente trabajo de investigación se realizó en la Estación Experimental "Raúl González” •del Valle de Sebaco. Con el objetivo de evaluar el comportamiento agronómico e industrial de cinco genotipos promisorios de tomate. ( Lycopersicum esculentum Mill ), usando como tratamientos los cultivares Martí, Topacio y Estela (de origen búlgaro) y UC-82 y VF-134 (de procedencia norteamericana), fue establecido un experimento en Bloques Completo al Azar, con cuatro repeticiones. El comportamiento agronómico de los diferentes genotipos en estudio en cuanto a crecimiento y desarrollo muestra que la variedad Martí presenta la mayor altura con promedio de 62.5 cm., la variedad VF - 134 el mayor ahijamiento con 19, y el mayor número de racimos por planta con promedio de 11; así mismo la variedad. UC - 62 muestra la mayor fructificación con promedio 42 fruto por planta; obteniéndose rendimientos comerciales, no comerciales y potenciales estadísticamente iguales, lo que demuestra que los cultivares de origen búlgaro tienen un comportamiento agronómico similar a las variedades ampliamente cultivadas en el país -UC-82 y VF-134-. El análisis químico de los parámetros agroindustria1es muestran que, UC - 82 y VF - 134 poseen el mayor contenido de sólidos solubles con 5.75 grados Brix. Los cultivares Martí y Estela presentan el coeficiente de acidez más bajo con 8.91% y 9.33% y un índice de madurez de 12.22% y 10.71% respectivamente. Topacio obtuvo la menor cantidad de Residuo Seco Útil con 4.94. El rendimiento teórico de posta, obtenido fue satisfactorio por encima del valores Stan dar establecido ( 22%) por toda las variedades, siendo UC- 62 el cultivar con el mayor valor con 23.53% en relación a los demás tratamientos.