Catch assessment of indigenous and exotic carp species of Nasti baor

An investigation on length-weight relationship, length-frequency distribution, catch per unit of effort (CPUE) and stocking and harvesting status of three Indian major carps: rohu Labeo rohita, catla Catla catla and mrigal Cirrhinus mrigala and three exotic carps: silver carp Hypophthalmichthys molitrix, grass carp Ctenopharyngodon idella) and common carp Cyprinus carpio was carried out in Nasti baor (oxbow lake) for the harvesting season from August to December 1995. The length-weight relationship for six carp species was established for the harvesting months of November and December 1995. The b values for different species respectively for the months of November and December were 2.95 and 2.58 for rohu, 3.06 and 2.98 for catla, 2,84 and 2.90 for mrigal, 2.75 and 2.60 for silver carp, 2.51 and 1.97 for grass carp and 2.38 and 2.50 for common carp. In CPUE study, the CPUE was 0.58 kg/ha/hr while the catch per gear was 0.08 kg/ha/hr/purse-seine. The recovery percentage of mrigal was highest (63.57%) and it was lowest (16.81%) in case of silver carp. The density of submerged macrophytes (Hydrilla, Utricularia, Ceratophyllum and Vallisneria) was highest (4.39 kg/sqm) in November and was lowest (0.76 kg/sqm) in September.

Seed germination and seedling emergence of the invasive exotic species, Clausena excavata

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Coverage and invariance for the biological control of pests in mediterranean greenhouses

A major problem related to the treatment of ecosystems is that they have no available mathematical formalization. This implies that many of their properties are not presented as short, rigorous modalities, but rather as long expressions which, from a biological standpoint, totally capture the significance of the property, but which have the disadvantage of not being sufficiently manageable, from a mathematical standpoint. The interpretation of ecosystems through networks allows us to employ the concepts of coverage and invariance alongside other related concepts. The latter will allow us to present the two most important relations in an ecosystem – predator–prey and competition – in a different way. Biological control, defined as “the use of living organisms, their resources or their products to prevent or reduce loss or damage caused by pests”, is now considered the environmentally safest and most economically advantageous method of pest control (van Lenteren, 2011). A guild includes all those organisms that share a common food resource (Polis et al., 1989), which in the context of biological control means all the natural enemies of a given pest. There are several types of intraguild interactions, but the one that has received most research attention is intraguild predation, which occurs when two organisms share the same prey while at the same time participating in some kind of trophic interaction. However, this is not the only intraguild relationship possible, and studies are now being conducted on others, such as oviposition deterrence. In this article, we apply the developed concepts of structural functions, coverage, invariant sets, etc. (Lloret et al., 1998, Esteve and Lloret, 2006a, Esteve and Lloret, 2006b and Esteve and Lloret, 2007) to a tritrophic system that includes aphids, one of the most damaging pests and a current bottleneck for the success of biological control in Mediterranean greenhouses.

Greenhouse pests; a manual of practice in the control of insects and other pests attacking ornamental plants and flowers grown under glass in Illinois.

Issued originally as Entomological series, circular 12.

Nanoscale control of energy and matter in plasma–surface interactions : toward energy- and matter-efficient nanotech

The approach to control the elementary processes of plasma–surface interactions to direct the fluxes of energy and matter at nano- and subnanometer scales is introduced. This ability is related to the solution of the grand challenge of directing energy and matter at nanoscales and is critical for the renewable energy and energy-efficient technologies for a sustainable future development. The examples of deterministic synthesis of self-organized arrays of metastable nanostructures in the size range beyond the reach of the present-day nanofabrication are considered to illustrate this possibility. By using precisely controlled and kinetically fast nanoscale transfer of energy and matter under nonequilibrium conditions and harnessing numerous plasma-specific controls of species creation, delivery to the surface,nucleation, and large-scale self-organization of nuclei and nanostructures, the arrays of metastable nanostructures can be created, arranged, stabilized, and further processed to meet the specific requirements of the envisaged applications.

Early and better maturity in carp brood stock with control of environment and feeding

Available of carp breeders in their prim state of maturity is a major constraint in hypophysation. Experiments conducted in a fish farm at Naihati, West Bengal, for two consecutive years, 1983-84 and 1984-85, clearly prove that by manipulation of environmental parameters such as metabolites, dissolved oxygen, running water conditions, as also of stock densities and quality and quantity of feed. Catla catla, Hypophythalmichthys molitrix, Labeo rohita, Cirrhina mrigala and Ctenopharyngodon idella can be made to attain better maturity and spawning stage much earlier than normal i.e. even in summer months and the entire stock spawned during the period from March to September. Percentage of successful breeding, quantities of eggs released and fertilised in relation to the body weight of all the species, were also found to be more in comparison to the brood stock raised through the conventional methods.

Croton tiglium (Linn) seed as an ideal eradicant of pests and predators in fish farms

The toxicity of Croton tiglium seed is very effective in the eradication of most of the aquatic fauna except a few species of hard shelled crustaceans such as crabs and prawns which are resistant to even very high concentrations of it. Its toxicity ranged between 0.4 and 2.2 p.p.m. for different species of fishes. Application of homogenized C. tiglium seed at the rate of 10 kg/ha (0.5 m depth) is found effective for the eradication of aquatic pests and predators of fish farms. While its toxicity lasts for 5-8 days in still water ponds, it is only for 1-3 days in tidal ponds with frequent replenishment of water. This method is thus most useful for the initial preparation of the ponds for pisciculture.

Invading predatory crustacean Dikerogammarus villosus eliminates bath native and exotic species

As the tempo of biological invasions increases, explanations and predictions of their impacts become more crucial. Particularly with regard to biodiversity, we require elucidation of interspecific behavioural interactions among invaders and natives. In freshwaters in The Netherlands, we show that the invasive Ponto-Caspian crustacean amphipod Dikerogammarus villosus is rapidly eliminating Gammarus duebeni, a native European amphipod, and Gammarus tigrinus, until now a spectacularly successful invader from North America. In the laboratory, survival of single (unguarded) female G. duebeni was significantly lower when male D. villosus were free to roam as compared with isolated within microcosms. In addition, survival of paired (guarded) female G. duebeni was significantly lower when male D. villosus as compared with male G. duebeni were present. D. villosus killed and consumed both recently moulted and, unusually, intermoult victims. Survival of G. tigrinus was significantly lower when D. villosus were free to roam as compared with isolated within microcosms and, again, both moulted and intermoult victims were preyed upon. Male D. villosus were significantly more predatory than were females, while female G. tigrinus were significantly more often preyed upon than were males. Predation by D. villosus on both species occurred over a range of water conductivities, an environmental feature previously shown to promote amphipod coexistence. This predatory invader is predicted to reduce further the amphipod diversity in a range of freshwater habitats in Europe and North America.

Control of porosity and pore size of metal reinforced carbon nanotube membranes

Membranes are crucial in modern industry and both new technologies and materials need to be designed to achieve higher selectivity and performance. Exotic materials such as nanoparticles offer promising perspectives, and combining both their very high specific surface area and the possibility to incorporate them into macrostructures have already shown to substantially increase the membrane performance. In this paper we report on the fabrication and engineering of metal-reinforced carbon nanotube (CNT) Bucky-Paper (BP) composites with tuneable porosity and surface pore size. A BP is an entangled mesh non-woven like structure of nanotubes. Pure CNT BPs present both very high porosity (>90%) and specific surface area (>400 m2/g). Furthermore, their pore size is generally between 20–50 nm making them promising candidates for various membrane and separation applications. Both electro-plating and electroless plating techniques were used to plate different series of BPs and offered various degrees of success. Here we will report mainly on electroless plated gold/CNT composites. The benefit of this method resides in the versatility of the plating and the opportunity to tune both average pore size and porosity of the structure with a high degree of reproducibility. The CNT BPs were first oxidized by short UV/O3 treatment, followed by successive immersion in different plating solutions. The morphology and properties of these samples has been investigated and their performance in air permeation and gas adsorption will be reported.

Microbiological responses to depuration and transport of native and exotic clams at optimal and stressful temperatures

The microbiological responses of two bivalves species from Tagus estuary, Venerupis pullastra (native clam) and Ruditapes philippinarum (exotic clam) were investigated during 48h of depuration and subsequent simulated transport in semi-dry conditions at two temperatures (4 and 22°C) until reaching 50% lethal time (LT50). Regardless of temperature and species, the maintenance of clams in water for 48h (depuration period) did not affect LT50 during transport. R.philippinarum showed higher survival rates than V.pullastra, always reaching LT50 later, especially at 4°C. Significant differences between clams' species were found in almost all microbiological parameters. This can be related with clams' biological activity and habitat environmental conditions since both clams do not coexist in Tagus estuary. Depuration was efficient to reduce the bacterial load, particularly Escherichia coli, but not efficient to remove Vibrio spp. In both species, the growth of Vibrio spp. was inhibited at 4°C, whereas exponential growth occurred at 22°C. Total viable counts significantly increased in most treatments, while E.coli counts significantly decreased to undetected levels, except for non-depurated R.philippinarum simulated transported at 4°C. Thus, this study highlights the importance of clams depuration for at least 24h in polluted estuarine areas, followed by transport at low temperatures (4°C). © 2013 Elsevier Ltd.

Control of insects and diseases in grove, garden and field.

Mode of access: Internet.

Sanitation in the control of insects and rodents of public health importance,

"CDC Training Program"--Cover.

You and I: The Effects of Intra- and Inter-Species Interactions on Microbial Biofilms, Growth, and Morphology

Humanity is shaped by its relationships with microbes. From bacterial infections to the production of biofuels, industry and health often hinge on our control of microbial populations. Understanding the physiological and genetic basis of their behaviors is therefore of the highest importance. To this end I have investigated the genetic basis of plastic adhesion in Saccharomyces cerevisiae, the mechanistic and evolutionary dynamics of mixed species biofilms with Escherichia coli and S. cerevisiae, and the induction of filamentation in E. coli. Using a bulk segregant analysis on experimentally evolved populations, I detected 28 genes that are likely to mediate plastic adhesion in S. cerevisiae. With a variety of imaging and culture manipulation techniques, I found that particular strains of E. coli are capable of inducing flocculation and macroscopic biofilm formation via coaggregation with yeast. I also employed experimental evolution and microbial demography techniques to find that selection for mixed species biofilm association leads to lower fecundity in S. cerevisiae. Using culture manipulation and imaging techniques, I also found that E. coli are capable of inducing a filamentous phenotype with a secreted signal that has many of the qualities of a quorum sensing molecule.

Compaction control of topography and fault network structure along strike-slip faults in sedimentary basins

Strike-slip faults commonly display structurally complex areas of positive or negative topography. Understanding the development of such areas has important implications for earthquake studies and hydrocarbon exploration. Previous workers identified the key factors controlling the occurrence of both topographic modes and the related structural styles. Kinematic and stress boundary conditions are of first-order relevance. Surface mass transport and material properties affect fault network structure. Experiments demonstrate that dilatancy can generate positive topography even under simple-shear boundary conditions. Here, we use physical models with sand to show that the degree of compaction of the deformed rocks alone can determine the type of topography and related surface fault network structure in simple-shear settings. In our experiments, volume changes of ∼5% are sufficient to generate localized uplift or subsidence. We discuss scalability of model volume changes and fault network structure and show that our model fault zones satisfy geometrical similarity with natural flower structures. Our results imply that compaction may be an important factor in the development of topography and fault network structure along strike-slip faults in sedimentary basins.

Kalman filtering for positioning and heading control of ships and offshore rigs

In this article, we have described the main components of a ship motion-control system and two particular motion-control problems that require wave filtering, namely, dynamic positioning and heading autopilot. Then, we discussed the models commonly used for vessel response and showed how these models are used for Kalman filter design. We also briefly discussed parameter and noise covariance estimation, which are used for filter tuning. To illustrate the performance, a case study based on numerical simulations for a ship autopilot was considered. The material discussed in this article conforms to modern commercially available ship motion-control systems. Most of the vessels operating in the offshore industry worldwide use Kalman filters for velocity estimation and wave filtering. Thus, the article provides an up-to-date tutorial and overview of Kalman-filter-based wave filtering.