Initial modelling and controller design for active control of spacecraft microvibrations

Microvibrations, at frequencies between 1 and 1000 Hz, generated by on board equipment, propagate throughout a spacecraft structure affecting the performance of sensitive payloads. The purpose of this work is to investigate strategies to model and reduce these dynamic disturbances by active control. Initial studies were performed by considering a mass loaded panel where the disturbance excitation source consisted of point forces, the objective being to minimise the displacement at an arbitrary output location. Piezoelectric patches acting as sensors and actuators were used. The equations of motion are derived by using Lagrange's equation with modal shapes as Ritz functions. The number of sensors/actuators and their location is variable. The set of equations obtained is then transformed into state variables and some initial controller design studies have been undertaken. These are based on feedback control implemented using a full state feedback and an observer which reconstructs the state vector from the available sensor signal. Here, the basics behind the structural modelling and controller design will be described. This preliminary analysis will also be used to identify short to medium term further work.

Centrifuge and discrete element modelling of tunnelling effects on pipelines

The paper presents centrifuge test data of the problem of tunnelling effects on buried pipelines and compares them to predictions made using DEM simulations. The paper focuses on the examination of pipeline bending moments, their distribution along the pipe, and their development with tunnel volume loss. Centrifuge results are obtained by PIV analysis and compared to results obtained using the DEM model. The DEM model was built to replicate the centrifuge model as closely as possible and included numerical features formulated specially for this task, such as structural elements to replicate the tunnel and pipeline. Results are extremely encouraging, with deviations between DEM and centrifuge test bending moment results being very small. © 2010 Taylor & Francis Group, London.

二噁英、多溴联苯醚和多氯联苯同时测定方法的研究

本实验以美国环保署1613B1、614和1668A等标准方法为基础,建立了同一样品中二噁英、多溴联苯醚和多氯联苯的同位素稀释-多层色谱柱净化-高分辨气质联用-高通量同时分析方法。该方法利用弗罗里土对二噁英组分吸附能力强的特点,采用不同极性的溶剂淋洗,先实现二噁英组分和其它两个组分的分离,再利用多溴联苯醚更易保留在硝酸银硅胶(10%)柱上的特点,实现了多溴联苯醚和多氯联苯两类化合物的分离。实验优化了样品前处理过程,纯化过程中去除了大量干扰物质,同时将三类化合物在前处理中进行分离,消除了相互干扰,实现了准确定

Continuous Diffraction Patterns from Circular Arrays of Carbon Nanotubes

We report the remarkable diffraction effects produced from circular patterned arrays of multiwalled carbon nanotubes (MWCNTs). Highly ordered circular arrays of multiwalled carbon nanotubes (with inter-nanotube spacings of 633 nm) display optical dispersion effects similar to compact discs. These arrays display remarkable diffraction patterns in the far field which are spatially continuous. High quality diffraction patterns were obtained experimentally which are in excellent agreement with the theoretical calculations. The achieved continuous diffraction patterns pave the way towards the utilization of engineered carbon nanotube arrays in applications like three dimensional holograms.

大宁河春季浮游藻类“水华”及其营养限制

报道了大宁河2004年春季和2005年春季浮游藻类的种类组成、垂直分布、数量、生物量以及C含量的调查结果,并应用多样性指数、丰富度指数和均匀性指数对其水质进行了综合评价;对大宁河蓄水后出现的富营养化现象和春季发生"水华"的原因进行了探讨,同时提出了控制水体富营养化的建议。2004年春季,藻类优势种为美丽星杆藻(Asterionella formosa)、卵形隐藻(Cryptomonas ovata)、里海小环藻(Cyclotella caspta)和新星形冠盘藻(Stephanodiscus neoast

钝顶螺旋藻的无机碳吸收及其碳酸酐酶作用

对钝顶螺旋藻的无机碳吸收利用能力及其碳酸酐酶(CA)作用进行了初步探讨．研究发现, 螺旋藻在pH 9．0时具有最高的光合作用速率,其胞内CA酶活性较高,但在该实验条件下并未检测到胞外CA酶活性．螺旋藻的pH补偿点可上升到11．5,胞外CA酶抑制剂对其pH补偿点没有明显的影响,螺旋藻对HCO3-的吸收利用可能存在主动转运机制,也可能会利用一部分CO32-．

CO_2对微拟球藻(Nannochloropsis sp.)利用有机碳和光合作用的影响

CO2浓度提高时,微拟球藻吸收醋酸钠的速率增加2倍。混养生长的藻细胞最大光合作用速率、光合作用效率、无机碳半饱和常数和无机碳饱和的光合作用速率均显著低于光自养条件下生长的。

五株纤毛虫遗传关系的ISSR分析

采用ISSR分子标记技术,尝试对四种五株纤毛虫(褶累枝虫(Epistylis plicatilis)、绿草履虫(Paramecium bursaria)、多态喇叭虫(Stentor polymorphus)、嗜热四膜虫BF1株(Tetrahymena thermophilaBF1)和嗜热四膜虫BF5株(T.ther-mophilaBF5))进行遗传关系研究。用13个ISSR引物对五株纤毛虫进行扩增,六个ISSR引物获得多态片段。根据Nei s遗传距离矩阵构建了五株纤毛虫的遗传关系树状图。UPGMA,NJ聚

Molecular characterization and expression pattern of fetuin-B in gibel carp (Carassius auratus gibelio)

Fetuin-B has recently been cloned and identified from rats, mice, and humans; their expression patterns, however, have not been elucidated yet. In this study, Cagfetuin-B has been cloned in gibel carp. RT-PCR and Western blot detection revealed that Cagfetuin-B is first transcribed from the blastula stage and at a relatively stable level afterward during embryogenesis and the larval stage. Cagfetuin-B transcripts are predominantly distributed over the yolk syncytial layer in the early embryos and later restricted to the cells of liver and brain in newly hatched larvae. Moreover, a dynamic distribution of Cagfetuin-B protein was observed in brain, kidney, liver, and skin during morphogenesis. In adult fish, Cagfetuin-B transcripts are restricted in liver and ovary. Our work, for the first time, revealed the extra-hepatic transcription and a dynamic distribution of fetuin-B during embryogenesis and in adults, which indicates the potential roles of fetuin-B in fish organogenesis.

Development and characterization of polymorphic microsatellite loci in the endangered Yangtze finless porpoise (Neophocaena phocaenoides asiaeorientalis)

The finless porpoise (Neophocaena phocaenoides) is one of the smallest cetacean species widely distributed in the shallow coastal waters of the Indo-Pacific Oceans. The population size of the Yangtze subspecies (N. p. asiaeorientalis) has sharply decreased in the last two decades and access to objective data on its population structure and genetic diversity would be of great assistance for their proper management. Here we report on the isolation of nine polymorphic microsatellite using the "Fast Isolation by AFLP of Sequences Containing repeats" (FIASCO) protocol. Polymorphism was assessed using 30 porpoise individuals randomly sampled in the Yangtze River. The number of alleles per locus varies from 2 to 9, with an average value of 5.56, whereas the ranges of observed and expected heterozygosi ties were 0.300-0.633 (mean 0.496) and 0.473-0.804 (mean 0.659), respectively.

Isolation and characterization of 18 polymorphic microsatellite markers in Chinese mandarin fish Siniperca chuatsi (Basilewsky)

Eighteen microsatellite markers were isolated and characterized using an enrichment protocol in the Chinese mandarin fish Siniperca chuatsi (Basilewsky), a commercially important piscivorous fish in China. Out of 48 pairs of primers designed, 18 loci exhibited polymorphism with three to six alleles (mean 4.4 alleles/locus) and average observed heterozygosity ranged from 0.633 to 0.833 (mean 0.748) in a test population from Dongting Lake of China. Except for two loci, all other 16 loci were in the Hardy-Weinberg equilibrium. These markers would be useful for such studies as population genetics, ecology and selective breeding of the Chinese mandarin fish in future.

Survival, growth, sex ratio, and maturity of the Chinese mitten crab (Eriocheir sinensis) reared in a Chinese pond

Aspects of the biology of pond-cultured Chinese mitten crab (Eriocheir sinensis H. Milne-Edwards) were studied from June to November 1993. The survival rate of the population was estimated at 18.6%, and there was no significant difference between sexes in growth (t-test, P > 0.05). As the crabs grew from 7.3 to 33.8 mm in mean carapace length, seven molts were observed for the population. The intermolt period ranged from seven to 22 days and lengthened with increased size. Sex ratio at each sampling time did not differ significantly from 1:1 (Chi-square test, P > 0.05). Female crabs presumably required about eleven postlarval molts to reach sexually mature size, which was 34.1 +/- 3.9 (SD) mm. in carapace length in this study.