退火对He注入及随后~(208)Pb~(27+)辐照的Al_2O_3单晶PL谱的影响

利用高能离子研究了110keV的He+注入Al2O3单晶及随后230MeV的208Pb27+辐照并在不同温度条件下退火样品的光致发光的特性.从测试结果可以清楚地看到在375nm,390nm,413nm和450nm出现了强烈的发光峰.经过600K退火2h后测试结果显示,390nm发光峰增强剧烈,而别的发光峰显示不明显.在900K退火条件下,390nm的发光峰开始减弱相反在510nm出现了较强的发光峰,到1100K退火完毕后390nm的发光峰完全消失,而510nm的发光峰相对增强.从辐照样品的FTIR谱中看到,波数在460—510cm-1间的吸收是振动模式,经过离子辐照后,吸收带展宽,随着辐照量的增大,Al2O3振动吸收峰消失,说明Al2O3振动模式被完全破坏.1000—1300cm-1之间为Al-O-Al桥氧的伸缩振动模式,辐照后吸收带向高波数方向移动.退火后的FTIR谱变化不大.

~(19)F+~(27)Al耗散反应中双核系统的转动与形变

测量了19F+27Al耗散反应产物B,C,N,O,F和Ne的激发函数,入射束流的能量从110．25MeV 到118．75MeV,能量步长为250keV．从产物的能量自关联函数中提取了反应中所形成的中间双核系统的转动惯量,与相粘模型计算的刚体转动惯量相比较,结果表明形成的双核系统有大的形变．

~(19)F+~(27)Al耗散反应产物截面测量中的不重复性

在中国原子能科学研究院的HI-13串列静电加速器上完成了114MeV和118．75MeV的19F+27Al 耗散反应产物B,C,N,O,F,Ne,Na和Mg的微分截面测量．条形27Al同位素靶的大小尺寸为 10mm×50mm,平均厚度约67μg／cm2．固定入射束流19F的能量,通过移动靶位,先后轰击了靶上20个不同的位置．实验结果表明,在弹靶系统、入射能量以及探测系统都相同的多次独立的微分截面测量中,截面的涨落不呈现高斯型几率分布．截面测量的这种不重复现象难以用有限计数率的统计性质来解释．

(19)~F+(27)~Al耗散反应中双核系统的转动与衰变

测量了19F+27Al耗散反应产物B,C,N,O,F和Ne的激发函数,入射束流的能量从110.25MeV 到118.75MeV,能量步长为250keV.用能量自关联函数方法从激发函数中提取了各反应产物的平均衰变宽度,利用同时考虑反应中所形成的中间双核系统的转动特性和衰变特性而发展了的Ericson核反应统计理论,讨论了19F+27Al耗散反应中双核系统随时间的演化过程.

高温注氦及随后230MeV的~(208)Pb~(27+)辐照Al_2O_3的光致发光谱的研究

主要研究了110keV的He~+高温注入Al_2O_3单晶及1.1MeV/u的~(208)Pb~(27+)辐照注氦Al_2O_3样品的光致发光的特性。从测试结果可以清楚地看到在375nm,413nm和450nm处出现了强烈的发光峰。并且在600K,5×10~(16) ions/cm~2剂量点,样品的发光峰是最强的。这表明He~+注入Al_2O_3后使带隙中深的辐射中心复合的效率大幅度提高,极大的增强了其发光强度,而且发光伴随着蓝移现象。而经过高能~(208)Pb~(27+)辐照后的样品,在390nm出现了新的发光峰,从FTIR谱中我们能够看到,可能是~(208)Pb~(27+)辐照相对沉积膜出现一定的晶化,其中含有许多纳米尺寸的Al_2O_3晶粒所致。

~(19)F+~(27)Al反应产物的角分布、角分散与耗散机制

完成了114MeV19F+27Al深部非弹性碰撞产物的角分布测量.分析了反应产物B,C,N,O,F,Ne,Na,Mg和Al的实验室系角分布,讨论了反应形成的中间双核系统随时间演化过程中角分布所表现出的耗散特点.从实验上提取了反应产物各元素的角分散参数并作了角分散参数的理论拟合,讨论了角分散参数的物理意义以及角分散参数与耗散反应产物的电荷数Z之间的依赖关系.

~(27,28)P+~(28)Si总反应截面增强及可能相关的机制

测量了27,28P和相应同中子异位素在28Si靶上的中能反应截面.测得N=12和13同中子异位素的反应截面在Z=15处突然增大.对Z≤14同中子异位素和28P的实验数据结果可以用改进的光学极限近似的Glauber理论很好地描述.28P的反应截面能够用扩大核芯以改进的Glauber理论来解释.但是,用改进光学极限和少体近似的Glauber理论却低估了27P的实验数据.理论分析表明,扩大的核芯加质子晕可能是响应27P+28Si反应截面增强的机制.

~(19)F+~(27)Al深部非弹性碰撞产物的角分布

完成了19F+27Al深部非弹性碰撞产物的角分布测量.初步分析了反应产物B,C,N,O,F,Ne,Na,Mg和Al的实验室系角分布,展现出深部非弹性反应机制的特点,显示了反应系统随时间的演化过程.

~(27)Al+~(27)Al重离子耗散碰撞中能量自关联函数的分析

测量了2 7Al+ 2 7Al耗散反应产物的激发函数 ,束流2 7Al8+的入射能量从1 1 4MeV到 1 2 7MeV变化 ,能量步长为 2 0 0keV .探测角度覆盖了实验室系1 0°— 57°的连续区域 .用不同的理论模型分析了耗散产物的能量自关联函数 .结果表明 ,反应所形成的中间双核系统的阻尼相干转动造成了激发函数中不可平滑的涨落结构 ,相干转动的阻尼来自量子混沌运动

~(27)Al+~(27)Al耗散反应截面涨落的角度关联测量

在2 7Al+ 2 7Al(Elab≈ 1 2 0MeV)耗散反应激发函数涨落的实验研究中 ,首次在较大的角度范围内获得截面涨落的角度关联系数和角度关联函数 .实验结果表明 ,角度关联函数的形状呈现明显的非对称性 ,角度相干宽度至少为 4 0°;截面涨落在前后角区表现出明显不同的角度相关性 .

25MeV/u ~(40)Ar+~(115)In,~(58)Ni,~(27)Al反应中前中角区碎片角分布和元素Z分布

测量了 ２５ＭｅＶ／ｕ４０　Ａｒ＋１１５　Ｉｎ，５８　Ｎｉ，２７　Ａ１反应前中角区出射碎片的角分布和 元素 Ｚ分布．用改进的量子分子动力学（ＭＱＭＤ）模型研究了碎片的角分布和 Ｚ 分布．理论计算值和实验值整体上符合得很好，但在前角区，ＭＱＭＤ模型低估 了碎片的产额，在中角区对于Ｚ接近弹核的碎片，理论计算值比实验值偏高．碎 片产物的角分布和Ｚ分布还与统计蒸发模型ＧＥＭＩＮＩ进行了比较，结果表明，在 前角区平衡蒸发成份所占的比例很小，中角区所占的比例有所增加，但仍然是较 小的比例．同时发现平衡蒸发成份随着出射碎片核电荷数Ｚ的减小而逐渐减 少．

Cross-correlation of excitation functions for different fragments and different scattering angles in Al-27(F-19, x)y reactions

Excitation functions have been measured for different projectile-like fragments produced in Al-27(F-19,x)y reactions at incident energies from 110.25 to 118.75 MeV in 250 keV steps. Strong cross section fluctuations of the excitation functions are observed. The cross- correlation coefficients of the excitation functions for different atomic number Z and for different scattering angle theta(cm) have been deduced. These coefficients are much larger than the statistical theoretical calculated ones. This indicates that there are strong correlations between different exit channels in the dissipative heavy ion Collision of Al-27(F-19,x)y.

Largely deformed dinuclear system formed in F-19+Al-27 dissipative collision

Excitation functions are measured for different charge products of the F-19+(27) Al reaction in the laboratory energy range 110.25-118.75MeV in steps of 250keV at theta(lab) = 57 degrees, 31 degrees and -29 degrees. The coherence rotation angular velocities of the intermediate dinuclear systems formed in the reaction are extracted from the cross section energy autocorrelation functions. Compared the angular velocity extracted from the experimental data with the ones deduced from the sticking limit, it is indicated that a larger deformation of the intermediate dinuclear system exists.

Rotation and deformation of the dinuclear system formed in dissipative reaction of F-19+Al-27

Excitation functions of the reaction products B, C, N, O, F and Ne emitted from the dissipative reaction of (19) F+(27) Al have been measured at incident energies from 110.25MeV to 118.75MeV in steps of 250keV. The moments of inertia of the intermediate dinuclear system formed in the reaction are extracted from the energy autocorrelation functions of the products. Comparing the moment of inertia extracted from the experimental data with the calculated one by using the sticking limit, it indicates that the formed dinuclear system has a large deformation in the reaction process.

Non-reproducibility of the cross sections of the products induced from dissipative reaction of F-19+Al-27

The differential cross sections of the dissipative products B, Q N, O, F, Ne, Na and Mg induced from the reactions of F-19+Al-27 at two incident energies have been measured at the HI-13 tandem accelerator, Beijing. In the case of a fixed beam incident energy 114MeV or 118.75MeV respectively, identical reaction system and the same detection system, 20 target points in steps of 2mm on(.)a 10mmx50mm rectangular Al foil have been bombarded. The experimental results indicate that the probability distribution of the cross sections is much wider than a standard Gaussian distribution. This non-reproducibility of the cross sections can't be interpreted by the statistical property of a finite count rate.