Decompression illness and its regulation in contemporary UK tunnelling : an engineering perspective:an engineering perspective

This thesis records the findings of a retrospective study of decompression illness (DCI) in the UK compressed air tunnelling industry since the mid-1980s. The thesis describes how the study arose, its scope and objectives, along with an overview of tunnelling and shaft-sinking. The development of compressed air working techniques is reviewed along with a description of decompression practice and DCI, and an outline of relevant legislation and guidance. The acquisition and manipulation of data to form a number of databases and spreadsheets on which the analysis was performed is discussed. That analysis examined measures of DCI incidence and quantified that incidence using these measures. Also considered is the variation in tolerance and susceptibility to DCI in the workforce, and the phenomenon of acclimatisation. An examination of the extent to which men worked on multiple contracts and the variation in their susceptibility to DCI on these contracts is included. Options are then considered for reducing the incidence of DCI. The first retained air-only decompression through the application of restrictions on exposure. The second related to the use of oxygen decompression. Finally the adequacy of the existing Regulations and Guidance is considered and recommendations made for possible changes to them, arising from the study. The main conclusions are that a number of measures of DCI incidence were identified, some more appropriate than others and that the incidence of DCI when so measured was high, disproportionately so in shift workers. No reasonably practicable restrictions on exposure were identified which would have allowed the retention of air-only decompression. Oxygen decompression looked promising but had yet to be used sufficiently extensively to generate enough data for analysis. Recommendations included one that an alternative technique for monitoring the effectiveness of decompression should be developed. The thesis ends with recommendations for further research.

Knowledge engineering for mental-health risk assessment and decision support

Mental-health risk assessment practice in the UK is mainly paper-based, with little standardisation in the tools that are used across the Services. The tools that are available tend to rely on minimal sets of items and unsophisticated scoring methods to identify at-risk individuals. This means the reasoning by which an outcome has been determined remains uncertain. Consequently, there is little provision for: including the patient as an active party in the assessment process, identifying underlying causes of risk, and eecting shared decision-making. This thesis develops a tool-chain for the formulation and deployment of a computerised clinical decision support system for mental-health risk assessment. The resultant tool, GRiST, will be based on consensual domain expert knowledge that will be validated as part of the research, and will incorporate a proven psychological model of classication for risk computation. GRiST will have an ambitious remit of being a platform that can be used over the Internet, by both the clinician and the layperson, in multiple settings, and in the assessment of patients with varying demographics. Flexibility will therefore be a guiding principle in the development of the platform, to the extent that GRiST will present an assessment environment that is tailored to the circumstances in which it nds itself. XML and XSLT will be the key technologies that help deliver this exibility.

Breaking down barriers:teenage girls’ perceptions of engineering as a study and career choice

Background: Stereotypically perceived to be an ‘all male’ occupation, engineering has for many years failed to attract high numbers of young women [1,2]. The reasons for this are varied, but tend to focus on misconceptions of the profession as being more suitable for men. In seeking to investigate this issue a participatory research approach was adopted [3] in which two 17 year-old female high school students interviewed twenty high school girls. Questions focused on the girls’ perceptions of engineering as a study and career choice. The findings were recorded and analysed using qualitative techniques. The study identified three distinctive ‘influences’ as being pivotal to girls’ perceptions of engineering; pedagogical; social; and, familial. Pedagogical Influences: Pedagogical influences tended to focus on science and maths. In discussing science, the majority of the girls identified biology and chemistry as more ‘realistic’ whilst physics was perceived to more suitable for boys. The personality of the teacher, and how a particular subject is taught, proved to be important influences shaping opinions. Social Influences: Societal influences were reflected in the girls’ career choice with the majority considering medical or social science related careers. Although all of the girls believed engineering to be ‘male dominated’, none believed that a woman should not be engineer. Familial Influences: Parental influence was identified as key to career and study choice; only two of the girls had discussed engineering with their parents of which only one was being actively encouraged to pursue a career in engineering. Discussion: The study found that one of the most significant barriers to engineering is a lack of awareness. Engineering did not register in the girls’ lives, it was not taught in school, and only one had met a female engineer. Building on the study findings, the discussion considers how engineering could be made more attractive to young women. Whilst misconceptions about what an engineer is need to be addressed, other more fundamental pedagogical barriers, such as the need to make physics more attractive to girls and the need to develop the curriculum so as to meet the learning needs of 21st Century students are discussed. By drawing attention to the issues around gender and the barriers to engineering, this paper contributes to current debates in this area – in doing so it provides food for thought about policy and practice in engineering and engineering education.

How the web of things challenges requirements engineering

As a subset of the Internet of Things (IoT), the Web of Things (WoT) shares many characteristics with wireless sensor and actuator networks (WSANs) and ubiquitous computing systems (Ubicomp). Yet to a far greater degree than the IoT, WSANs or Ubicomp, the WoT will integrate physical and information objects, necessitating a means to model and reason about a range of context types that have hitherto received little or no attention from the RE community. RE practice is only now developing the means to support WSANs and Ubicomp system development, including faltering first steps in the representation of context. We argue that these techniques will need to be developed further, with a particular focus on rich context types, if RE is to support WoT application development. © 2012 Springer-Verlag.

Outsourcing and offshoring engineering projects:understanding the value, sourcing models, and coordination practices

In this paper, we review recent developments in the field of outsourcing and offshoring and the implications for engineering management. We examine three aspects involved in outsourcing and offshoring, namely, sourcing models, coordination, and value extracted from outsourcing projects. We conclude that additional research is needed on recent trends in outsourcing and the impact of such change process on the practice of engineering management. © 2011 IEEE.

Form follows function:model-driven engineering for clinical trials

We argue that, for certain constrained domains, elaborate model transformation technologies-implemented from scratch in general-purpose programming languages-are unnecessary for model-driven engineering; instead, lightweight configuration of commercial off-the-shelf productivity tools suffices. In particular, in the CancerGrid project, we have been developing model-driven techniques for the generation of software tools to support clinical trials. A domain metamodel captures the community's best practice in trial design. A scientist authors a trial protocol, modelling their trial by instantiating the metamodel; customized software artifacts to support trial execution are generated automatically from the scientist's model. The metamodel is expressed as an XML Schema, in such a way that it can be instantiated by completing a form to generate a conformant XML document. The same process works at a second level for trial execution: among the artifacts generated from the protocol are models of the data to be collected, and the clinician conducting the trial instantiates such models in reporting observations-again by completing a form to create a conformant XML document, representing the data gathered during that observation. Simple standard form management tools are all that is needed. Our approach is applicable to a wide variety of information-modelling domains: not just clinical trials, but also electronic public sector computing, customer relationship management, document workflow, and so on. © 2012 Springer-Verlag.

Sustainable purchasing practices:an investigation into current industry awareness and practice

This research study illustrates the importance of sustainable purchasing practices for organizations in the U.S. distribution industry and answers several important questions: what is the current awareness of U.S. organizations regarding sustainable purchasing practices; to what extent are U.S. organizations evaluating, selecting, and retaining suppliers based upon sustainable purchasing practices; and to what extent are sustainable purchasing practices being implemented by the U.S. organizations under study? With an ever increasing global economy, is it critically important for organizations to put in place sustainability practices; the biggest impact organizations can make is often in an organization’s purchasing department. The researcher begins by explaining the reasoning for conducting the research, and then builds the readers’ understanding of sustainability in a supply chain environment. It then moves to the subject of how sustainable purchasing can be an advantageous method for bringing about “triple bottom line” savings to an organization. This section is followed by the researcher’s methodology and ending results for a survey conducted to examine the current awareness and implementation of sustainable purchasing practices among U.S. plumbing, heating, cooling and piping (PHCP) distribution firms who participated in the study.

Using cognitive load theory to interpret student difficulties with a problem-based learning approach to engineering education:a case study

This article reports on an investigationwith first year undergraduate ProductDesign and Management students within a School of Engineering and Applied Science. The students at the time of this investigation had studied fundamental engineering science and mathematics for one semester. The students were given an open ended, ill-formed problem which involved designing a simple bridge to cross a river.They were given a talk on problemsolving and given a rubric to follow, if they chose to do so.They were not given any formulae or procedures needed in order to resolve the problem. In theory, they possessed the knowledge to ask the right questions in order tomake assumptions but, in practice, it turned out they were unable to link their a priori knowledge to resolve this problem. They were able to solve simple beam problems when given closed questions. The results show they were unable to visualize a simple bridge as an augmented beam problem and ask pertinent questions and hence formulate appropriate assumptions in order to offer resolutions.

Time for action? Elementary engineering education - Challenging teachers, policy makers and parents

Grounded in the findings of a three year exploratory student whereby teachers' and policy makers' perceptions of elementary level engineering education were analysed, this paper focuses upon three strands of engineering education activity: Pedagogy: Practice, and: Policy. Taking into account the challenges associated with introducing engineering education at an elementary level across the UK, the paper critiques the role played by the 'competition model' in promoting engineering to children and 4 to 11 years. In considering the 'added value' that appropriately developed engineering education activities can offer in the classroom the discussion argues that elementary level engineering has the potential to reach across the curriculum, offering context and depth in many different areas. The paper concludes by arguing that by introducing the discipline to children at a foundational level, switching on their 'Engineering Imaginations' and getting them to experience the value and excitement of engineering, maths and applied science a new "Educational Frontier" will be forged. © American Society for Engineering Education, 2014.

Part-time students in the workforce - enhancing practice in course provision

This paper describes a recent project on HE delivery to part-time students in the workforce. The main aim has been to investigate and propose effective practice in part-time provision in engineering in order to enhance the experience of part-time students at the same time as giving potential benefits to courses, departments and all students. The project has included interviews with employers and a questionnaire survey for current part-time students. The final guidance has been assembled with the aim of supporting the enhancement of existing courses and the development of new part-time provision. The paper presents the approaches taken in the project as a whole, analyses the results of the student survey, and summarises the overall outcomes.

"How prepared are engineering educators to implement active learning?" - The emerging findings

This paper discusses the question of how well prepared Engineering Educators are to implement Active Learning approaches within Higher Education undergraduate Engineering Programmes in Malaysia. As the role of Higher Education has shifted from being that of a 'knowledge provider' to become primarily focused upon 'learning facilitation', so the role of teachers or academic staff has changed in that they have become the key to implementing successful Active Learning. Based upon the emergent findings from a case study conducted at a Malaysian institution of higher education, the paper reveals that the engineering educators within the institution concerned were neither prepared nor ready to implement Active Learning. Indeed, it is evident from the study findings that a huge effort is needed in terms of educational policy and practice to ensure that Malaysian institutions offering engineering education should move efficiently and effectively towards the unilateral adoption of Active Learning approaches.

Lecturers' experiences of assessing generic skills in an active learning environment for engineering education in Malaysia - Emergent findings

The aim of this paper is to explore the engineering lecturers' experiences of generic skills assessment within an active learning context in Malaysia. Using a case-study methodology, lecturers' assessment approaches were investigated regarding three generic skills; verbal communication, problem solving and team work. Because of the importance to learning of the assessment of such skills it is this assessment that is discussed. The findings show the lecturers' initial feedback to have been generally lacking in substance, since they have limited knowledge and experience of assessing generic skills. Typical barriers identified during the study included; generic skills not being well defined, inadequate alignment across the engineering curricula and teaching approaches, assessment practices that were too flexible, particular those to do with implementation; and a failure to keep up to date with industrial requirements. The emerging findings of the interviews reinforce the arguments that there is clearly much room for improvement in the present state of generic skills assessment.

How do engineering students develop practical competencies during a period of industrial placement? - Students' perceptions

This paper explores engineering students' perceptions of developing practical competencies as experienced in their industrial placements. In addition, it discusses the criticisms in the literature on Problem Based Learning, Project Based Learning and Conceive-Design-Implement-Operate in relation to the evaluation of effective learning and teaching during placements. The paper goes on to discuss a study which examines how undergraduate engineering students develop practical competencies during their industrial placements. A phenomenological research approach is adopted using in-depth interviews and document analysis. The research findings from this PhD study will contribute to the knowledge, theory and practice for the students, the industries and the institutions of higher education as students' practical competencies are developed and graduate employability rises. In conclusion, this study explores students' experiences of developing practical competencies during industrial placements. Hence, the study should be able to contribute to a set of evidence-based guidelines for higher education institutions and industry.

The future of engineering - Do primary school engineering education interventions leave a lasting impression?

This positional paper proposes a conceptual framework and methodological approach for use in a PhD study investigating the longer term educational and social impact of 'active' engineering focused interventions for children age 8-10 in the UK. The study will critically analyse how a child's participation in an engineering education activity contributes to the Engineering Capital that the child possesses; focusing on how the child's awareness and perceptions about engineering are affected. To achieve this aim it is proposed that Grounded Theory methodology be used to enable an in-depth analysis of participation from the perspective of the child participant. The study proposed will be longitudinal, taking place over three formative years for the education and career aspirations of the child, from age 8-10 to 11-13. Although the research is in its infancy, this paper will provide the opportunity to develop theory in an underdeveloped area of engineering education research.

Making mole-hills out of mountains:Peer Mentoring in Engineering education - A case-study

Based on the emergent findings of a pilot study which examined the issues around introducing Peer Mentoring into an Engineering School, this paper, which is very much a 'work in progress', describes and discusses results from the first year of what will be a three year exploratory study. Focusing on three distinctive concepts integral to the student experience, Relationships, Variety and Synergy, the study follows an Action Research Design in that it aims to find a realistic and workable solution to issues of attrition within the Engineering School in which the Project and Study are set. Starting with the research question "Does Peer Mentoring improve engineering students' transition into university?"', the Pilot Project and Study will run for three years, each year building on the lessons of the previous year.