Writing in a Mathematics Classroom: A Form of Communication and Reflection

In this action research study, I investigated the use of journaling in my seventh grade mathematics classroom. I discovered that journaling can be a very rewarding and beneficial experience for me and for my students. Through journaling, my students became more adept at using correct mathematical terminology in writing and in speaking. The students also believed that they learned the content more deeply and retained it better. Additionally, implementing mathematical journals caused me to emphasize the use of correct terminology and thorough explanations of mathematical thinking in classroom discussions. As a result of this research, I plan to refine my journaling process and continue to use mathematical journals with my future classes.

Preparing writing centers and tutors for literacy mediation for working class campus-staff

Writing centers work with writers; traditionally services have been focused on undergraduates taking composition classes. More recently, centers have started to attract a wider client base including: students taking labs that require writing; graduate students; and ESL students learning the conventions of U.S. communication. There are very few centers, however, which identify themselves as open to working with all members of the campus-community. Michigan Technological University has one such center. In the Michigan Tech writing center, doors are open to “all students, faculty and staff.” While graduate students, post docs, and professors preparing articles for publication have used the center, for the first time in the collective memory of the center UAW staff members requested center appointments in the summer of 2008. These working class employees were in the process of filling out a work related document, the UAW Position Audit, an approximately seven-page form. This form was their one avenue for requesting a review of the job they were doing; the review was the first step in requesting a raise in job level and pay. This study grew out of the realization that implicit literacy expectations between working class United Auto Workers (UAW) staff and professional class staff were complicating the filling out and filing of the position audit form. Professional class supervisors had designed the form as a measure of fairness, in that each UAW employee on campus was responding to the same set of questions about their work. However, the implicit literacy expectations of supervisors were different from those of many of the employees who were to fill out the form. As a result, questions that were meant to be straightforward to answer were in the eyes of the employees filling out the form, complex. Before coming to the writing center UAW staff had spent months writing out responses to the form; they expressed concerns that their responses still would not meet audience expectations. These writers recognized that they did not yet know exactly what the audience was expecting. The results of this study include a framework for planning writing center sessions that facilitate the acquisition of literacy practices which are new to the user. One important realization from this dissertation is that the social nature of literacy must be kept in the forefront when both planning sessions and when educating tutors to lead these sessions. Literacy scholars such as James Paul Gee, Brian Street, and Shirley Brice Heath are used to show that a person can only know those literacy practices that they have previously acquired. In order to acquire new literacy practices, a person must have social opportunities for hands-on practice and mentoring from someone with experience. The writing center can adapt theory and practices from this dissertation that will facilitate sessions for a range of writers wishing to learn “new” literacy practices. This study also calls for specific changes to writing center tutor education.

Multimembership and Identity in Writing Centers and in Industry: Examining the Work of Reconciliation in the Michigan Tech Multiliteracies Center and at Kimberly-Clark Corporation

Writing center scholarship and practice have approached how issues of identity influence communication but have not fully considered ways of making identity a key feature of writing center research or practice. This dissertation suggests a new way to view identity -- through an experience of "multimembership" or the consideration that each identity is constructed based on the numerous community memberships that make up that identity. Etienne Wenger (1998) proposes that a fully formed identity is ultimately impossible, but it is through the work of reconciling memberships that important individual and community transformations can occur. Since Wenger also argues that reconciliation "is the most significant challenge" for those moving into new communities of practice (or, "engage in a process of collective learning in a shared domain of human endeavor" (4)), yet this challenge often remains tacit, this dissertation examines and makes explicit how this important work is done at two different research sites - a university writing center (the Michigan Tech Multiliteracies Center) and at a multinational corporation (Kimberly-Clark Corporation). Drawing extensively on qualitative ethnographic methods including interview transcriptions, observations, and case studies, as well as work from scholars in writing center studies (Grimm, Denney, Severino), literacy studies (New London Group, Street, Gee), composition (Horner and Trimbur, Canagarajah, Lu), rhetoric (Crowley), and identity studies (Anzaldua, Pratt), I argue that, based on evidence from the two sites, writing centers need to educate tutors to not only take identity into consideration, but to also make individuals' reconciliation work more visible, as it will continue once students and tutors leave the university. Further, as my research at the Michigan Tech Multiliteracies Center and Kimberly-Clark will show, communities can (and should) change their practices in ways that account for reconciliation work as identity, communication, and learning are inextricably bound up with one another.

Looking at the effectiveness of an earth science unit designed using the Understanding by Design process

This report shares my efforts in developing a solid unit of instruction that has a clear focus on student outcomes. I have been a teacher for 20 years and have been writing and revising curricula for much of that time. However, most has been developed without the benefit of current research on how students learn and did not focus on what and how students are learning. My journey as a teacher has involved a lot of trial and error. My traditional method of teaching is to look at the benchmarks (now content expectations) to see what needs to be covered. My unit consists of having students read the appropriate sections in the textbook, complete work sheets, watch a video, and take some notes. I try to include at least one hands-on activity, one or more quizzes, and the traditional end-of-unit test consisting mostly of multiple choice questions I find in the textbook. I try to be engaging, make the lessons fun, and hope that at the end of the unit my students get whatever concepts I‘ve presented so that we can move on to the next topic. I want to increase students‘ understanding of science concepts and their ability to connect understanding to the real-world. However, sometimes I feel that my lessons are missing something. For a long time I have wanted to develop a unit of instruction that I know is an effective tool for the teaching and learning of science. In this report, I describe my efforts to reform my curricula using the “Understanding by Design” process. I want to see if this style of curriculum design will help me be a more effective teacher and if it will lead to an increase in student learning. My hypothesis is that this new (for me) approach to teaching will lead to increased understanding of science concepts among students because it is based on purposefully thinking about learning targets based on “big ideas” in science. For my reformed curricula I incorporate lessons from several outstanding programs I‘ve been involved with including EpiCenter (Purdue University), Incorporated Research Institutions for Seismology (IRIS), the Master of Science Program in Applied Science Education at Michigan Technological University, and the Michigan Association for Computer Users in Learning (MACUL). In this report, I present the methodology on how I developed a new unit of instruction based on the Understanding by Design process. I present several lessons and learning plans I‘ve developed for the unit that follow the 5E Learning Cycle as appendices at the end of this report. I also include the results of pilot testing of one of lessons. Although the lesson I pilot-tested was not as successful in increasing student learning outcomes as I had anticipated, the development process I followed was helpful in that it required me to focus on important concepts. Conducting the pilot test was also helpful to me because it led me to identify ways in which I could improve upon the lesson in the future.

Guide to Writing a Programmatic Resource Management Plan/ Environmental Impact Statement for the Bureau of Land Management

This guide is written for Booz Allen Hamilton (BAH) employees assigned to the Public Lands team who may have some National Environmental Policy Act (NEPA) knowledge, possibly have experience with writing Environmental Impact Statements (EIS), and with little or no experience writing programmatic EIS documents. The guide contains information encompassing the preparation of a complete Resource Management Plan/Environmental Impact Statement (RMP/EIS) for the Bureau of Land Management. The RMP/EIS is a programmatic NEPA document which has many differences and nuances distinct from a typical project type EIS. This guide provides the information necessary for a BAH Public Lands team member to understand the project process and the RMP/EIS document to successfully maneuver through the entire project from beginning to end.

An Exercise in Legal Honesty: Re-writing the Court of Justice and the Bundesverfassungsgericht. IHS Political Science Series No. 136, February 2014

At a time of crisis – a true state of emergency – both the Court of Justice of the European Union and the German Federal Constitutional Court have failed the rule of law in Europe. Worse still, in their evaluation of the ersatz crisis law, which has been developed in response to financial and sovereign debt crises, both courts have undermined constitutionality throughout Europe. Each jurisdiction has been implicated within the techocratisation of democratic process. Each Court has contributed to an incremental process of the undermining of the political subjectivity of European Citizens. The results are depressing for lawyers who are still attached to notions of constitutionality. Yet, we must also ask whether the Courts could have acted otherwise. Given the original flaws in the construction of Economic and Monetary Union, as well as the politically pre-emptive constraints imposed by global financial markets, each Court might thus be argued to have been forced to suspend immediate legality in a longer term effort to secure the character of the legal jurisdiction as a whole. Crisis can and does defeat the law. Nevertheless, what continues to disturb is the failure of law in Europe to open up any perspective for a return to normal constitutionality post crisis, as well as its apparent inability to give proper and honest consideration to the hardship now being experienced by millions of Europeans within crisis. This contribution accordingly seeks to reimagine each Judgment in a language of legal honesty. Above all, this contribution seeks to suggest a new form of post-national constitutional language; a language which takes as its primary function, proper protection of democratic process against the ever encroaching powers of a post-national executive power. This contribution forms a part of an on-going effort to identify a new basis for the legitimacy of European Law, conducted jointly and severally with Christian Joerges, University of Bremen and Hertie School of Government, Berlin. Differences do remain in our theoretical positions; hence this individual essay. Nevertheless, the congruence between pluralist and conflict of law approaches to the topic are also readily apparent. See, for example, Everson & Joerges (2013).

Combining the power of online crowdsourcing with creative writing user interfaces

The goal of this work was to provide professional and amateur writers with a new way of enhancing their productivity and mental well-being, by helping them overcoming writers block and being able to achieve a state of optimal experience while writing. Our approach is based on bringing together different components to create what we call a creative moment. A creative moment is composed by an image, a text, a mood, a location and a color. The color presented in the creative moment varied according to the mood that was associated to the creative moment. With the creative moments we hoped that our users could have a way to easily trigger their creativity and have a kick start in their work. The prototyping of a web crowdsourcing platform, named CreativeWall, and a Microsoft Word Add-In, that was used on the user study performed, is described and their implementations are discussed. The user study reveals that our approach does have a positive influence in the productivity of the participants when compared with another existing approach. The study also revealed that our approach can ease the process of achieving a state of optimal experience by enhancing one of the dimensions presented on the Flow Theory. At the end we present what we consider would be some possible future developments for the concept created during the development of this work.

Helene & Writing Abuse, Shame, and Death: A Poetics of Spirit within the Failing Body

Thesis (Master's)--University of Washington, 2016-06

Teaching College Writing in a High School Setting: The Impact of Concurrent Enrollment on Teacher Learning and Practice

Thesis (Ph.D.)--University of Washington, 2016-06

The ethics pyramid: Making ethics unavoidable in the public relations process

To move from the realm of good intent to verifiable practice, ethics needs to be approached in the same way as any other desired outcome of the public relations process: that is, operationalized and evaluated at each stage of a public relations campaign. A pyramid model—the "ethics pyramid" —is useful for incorporating ethical reflection and evaluation processes into the standard structure of a typical public relations plan. Practitioners can use it to integrate and manage ethical intent, means, and ends, by setting ethics objectives, considering the ethics of each campaign tactic, and reporting whether ethical outcomes have been attained.

Combining the power of online crowdsourcing with creative writing user interfaces

The goal of this work was to provide professional and amateur writers with a new way of enhancing their productivity and mental well-being, by helping them overcoming writers block and being able to achieve a state of optimal experience while writing. Our approach is based on bringing together different components to create what we call a creative moment. A creative moment is composed by an image, a text, a mood, a location and a color. The color presented in the creative moment varied according to the mood that was associated to the creative moment. With the creative moments we hoped that our users could have a way to easily trigger their creativity and have a kick start in their work. The prototyping of a web crowdsourcing platform, named CreativeWall, and a Microsoft Word Add-In, that was used on the user study performed, is described and their implementations are discussed. The user study reveals that our approach does have a positive influence in the productivity of the participants when compared with another existing approach. The study also revealed that our approach can ease the process of achieving a state of optimal experience by enhancing one of the dimensions presented on the Flow Theory. At the end we present what we consider would be some possible future developments for the concept created during the development of this work.

Writing and characterisation methods for UV-photosensitivity based devices and their applications

The underlying work to this thesis focused on the exploitation and investigation of photosensitivity mechanisms in optical fibres and planar waveguides for the fabrication of advanced integrated optical devices for telecoms and sensing applications. One major scope is the improvement of grating fabrication specifications by introducing new writing techniques and the use of advanced characterisation methods for grating testing. For the first time the polarisation control method for advanced grating fabrication has successfully been converted to apodised planar waveguide fabrication and the development of a holographic method for the inscription of chirped gratings at arbitrary wavelength is presented. The latter resulted in the fabrication of gratings for pulse-width suppression and wavelength selection in diode lasers. In co-operation with research partners a number of samples were tested using optical frequency domain and optical low coherence reflectometry for a better insight into the limitations of grating writing techniques. Using a variety of different fabrication methods, custom apodised and chirped fibre Bragg gratings were written for the use as filter elements for multiplexer-demultiplexer devices, as well as for short pulse generation and wavelength selection in telecommunication transmission systems. Long period grating based devices in standard, speciality and tapered fibres are presented, showing great potential for multi-parameter sensing. One particular scope is the development of vectorial curvature and refractive index sensors with potential for medical, chemical and biological sensing. In addition the design of an optically tunable Mach-Zehnder based multiwavelength filter is introduced. The discovery of a Type IA grating type through overexposure of hydrogen loaded standard and Boron-Germanium co-doped fibres strengthened the assumption of UV-photosensitivity being a highly non-linear process. Gratings of this type show a significantly lower thermal sensitivity compared to standard gratings, which makes them useful for sensing applications. An Oxford Lasers copper-vapour laser operating at 255 nm in pulsed mode was used for their inscription, in contrast to previous work using CW-Argon-Ion lasers and contributing to differences in the processes of the photorefractive index change

Fiber bragg gratings:advances in fabrication process and tools

Successful commercialization of a technology such as Fiber Bragg Gratings requires the ability to manufacture devices repeatably, quickly and at low cost. Although the first report of photorefractive gratings was in 1978 it was not until 1993, when phase mask fabrication was demonstrated, that this became feasible. More recently, draw tower fabrication on a production level and grating writing through the polymer jacket have been realized; both important developments since they preserve the intrinsic strength of the fiber. Potentially the most significant recent development has been femtosecond laser inscription of gratings. Although not yet a commercial technology, it provides the means of writing multiple gratings in the optical core providing directional sensing capability in a single fiber. Femtosecond processing can also be used to machine the fiber to produce micronscale slots and holes enhancing the interaction between the light in the core and the surrounding medium. © 2011 Bentham Science Publishers Ltd. All rights reserved.