Nd:YAG Laser Irradiation of Etched/Unetched Dentin Through an Uncured Two-step Etch-and-Rinse Adhesive and its Effect on Microtensile Bond Strength

Purpose: To evaluate whether Nd:YAG laser irradiation of etched and unetched dentin through an uncured adhesive affected the microtensile bond strength (pTBS). Materials and Methods: Flat dentin surfaces were created in 19 extracted human third molars. Adper Single Bond (SB) adhesive was applied over etched (groups 1 to 3) or unetched dentin (groups 4 to 6). The dentin was then irradiated with a Nd:YAG laser through the uncured adhesive, using 0.75 or 1 W power settings, except for the control groups (groups 1 and 4). The adhesive was light cured and composite crowns were built up. After 24 h, the teeth were sectioned into beams, with cross-sectional areas of 0.49 mm(2), and were stressed under tension. Data were statistically analyzed using two-way ANOVA and Tukey's test (alpha = 5%). Dentin surfaces of fractured specimens and the interfaces of untested beams were observed under scanning electron microscopy (SEM). Results: Acid etching, laser irradiation, and their interaction significantly affected bonding (p < 0.05). Laser irradiation did not improve bonding of etched dentin to resin (p > 0.05). However, higher pTBS means were found on unetched lased dentin (groups 5 and 6), but only in comparison to group 4, where neither lasing nor etching was performed. Groups 4 to 6 showed the lowest pTBS means among all groups tested (p < 0.05). Laser irradiation did not change the characteristics of the hybrid layers created, while solidification globules were observed on lased dentin surfaces under SEM. Conclusion: Laser irradiation of dentin through the uncured adhesive did not significantly improve the pTBS in comparison to the suggested manufacturer's technique.

Internal fit of two all-ceramic systems and metal-ceramic crowns

OBJECTIVES: The aim of this study was to investigate the internal fit (IF) of glass-infiltrated alumina (ICA - In-Ceram Alumina), yttria-stabilized tetragonal zirconia polycrystals (Y-TZP - IPS e.max ZirCAD), and metal-ceramic (MC - Ni-Cr alloy) crowns. MATERIAL AND METHODS: Sixty standardized resin-tooth replicas of a maxillary first molar were produced for crown placement and divided into 3 groups (n=20 each) according to the core material used (metal, ICA or Y-TZP). The IF of the crowns was measured using the replica technique, which employs a light body polyvinyl siloxane impression material to simulate the cement layer thickness. The data were analyzed according to the surfaces obtained for the occlusal space (OS), axial space (AS) and total mean (TM) using two-way ANOVA with Tukey s multiple comparison test (p<0.05). RESULTS: No differences among the different areas were detected in the MC group. For the Y-TZP and ICA groups, AS was statistically lower than both OS and TM. No differences in AS were observed among the groups. However, OS and TM showed significantly higher values for ICA and Y-TZP groups than MC group. Comparisons of ICA and Y-TZP revealed that OS was significantly lower for Y-TZP group, whereas no differences were observed for TM. CONCLUSIONS: The total mean achieved by all groups was within the range of clinical acceptability. However, the metal-ceramic group demonstrated significantly lower values than the all-ceramic groups, especially in OS.

Clustering of variables around latent components: an application in consumer science

The present work proposes a method based on CLV (Clustering around Latent Variables) for identifying groups of consumers in L-shape data. This kind of datastructure is very common in consumer studies where a panel of consumers is asked to assess the global liking of a certain number of products and then, preference scores are arranged in a two-way table Y. External information on both products (physicalchemical description or sensory attributes) and consumers (socio-demographic background, purchase behaviours or consumption habits) may be available in a row descriptor matrix X and in a column descriptor matrix Z respectively. The aim of this method is to automatically provide a consumer segmentation where all the three matrices play an active role in the classification, getting homogeneous groups from all points of view: preference, products and consumer characteristics. The proposed clustering method is illustrated on data from preference studies on food products: juices based on berry fruits and traditional cheeses from Trentino. The hedonic ratings given by the consumer panel on the products under study were explained with respect to the product chemical compounds, sensory evaluation and consumer socio-demographic information, purchase behaviour and consumption habits.

A comparison of two statistical methods for analysis of day of the week effect on births from 2005-2007 in Harris County of Texas

The pattern of the births during the week has been reported by many studies. The births occurred in weekends are found consistently less then births occurred in weekdays. This study employed two statistical methods, two-way ANOVA and two-way Friedman's test to analyse the daily variations in amount of births of 222,735 births from 2005-2007 in Harris County, Texas. The two methods were compared on their assumptions, procedures and results. Both of the tests showed a significant result which indicated that the births through the week are not uniformly distributed. The result of multiple comparison demonstrated the births occurring on weekends were significantly different than the births occurring on weekdays with least amount on Sundays.^

Depths and ages of seismic sequence boundaries in ODP Leg 166 holes

High-resolution, multichannel seismic data collected across the Great Bahama Bank margin and the adjacent Straits of Florida indicate that the deposition of Neogene-Quaternary strata in this transect are controlled by two sedimentation mechanisms: (1) west-dipping layers of the platform margin, which are a product of sea-level-controlled, platform-derived downslope sedimentation; and (2) east- or north-dipping drift deposits in the basinal areas, which are deposited by ocean currents. These two sediment systems are active simultaneously and interfinger at the toe-of-slope. The prograding system consists of sigmoidal clinoforms that advanced the margin some 25 km into the Straits of Florida. The foresets of the clinoforms are approximately 600 m high with variable slope angles that steepen significantly in the Pleistocene section. The seismic facies of the prograding clinoforms on the slope is characterized by dominant, partly chaotic, cut-and-fill geometries caused by submarine canyons that are oriented downslope. In the basin axis, seismic geometries and facies document deposition from and by currents. Most impressive is an 800-m-thick drift deposit at the confluence of the Santaren Channel and the Straits of Florida. This "Santaren Drift" is slightly asymmetric, thinning to the north. The drift displays a highly coherent seismic facies characterized by a continuous succession of reflections, indicating very regular sedimentation. Leg 166 of the Ocean Drilling Program (ODP) drilled a transect of five deep holes between 2 and 30 km from the modern platform margin and retrieved the sediments from both the slope and basin systems. The Neogene slope sediments consist of peri-platform oozes intercalated with turbidites, whereas the basinal drift deposits consist of more homogeneous, fine-grained carbonates that were deposited without major hiatuses by the Florida Current starting at approximately 12.4 Ma. Sea-level fluctuations, which controlled the carbonate production on Great Bahama Bank by repeated exposure of the platform top, controlled lithologic alternations and hiatuses in sedimentation across the transect. Both sedimentary systems are contained in 17 seismic sequences that were identified in the Neogene-Quaternary section. Seismic sequence boundaries were identified based on geometric unconformities beneath the Great Bahama Bank. All the sequence boundaries could be traced across the entire transect into the Straits of Florida. Biostratigraphic age determinations of seismic reflections indicate that the seismic reflections of sequence boundaries have chronostratigraphic significance across both depositional environments.

Atención al cliente y medios sociales en la empresa

online donde el contenido es creado por los propios usuarios mediante el uso de las tecnologías de la web 2.0, que facilitan la edición, la publicación y el intercambio de información, de tal manera que los social media están democratizando las comunicaciones. Según datos publicados por eMarketer, casi el 25% del total de la inversión publicitaria mundial para el 2014 estará dirigida a medios digitales. Los medios de comunicación tradicionales están sumidos desde algún tiempo en una profunda crisis. En los comienzos de Internet, los protagonistas de este sector han creído en la red como un medio de publicación de contenidos en una única dirección, esto es la web 1.0, personas conectándose a páginas web. El típico lector de revista y seminario se ha convertido en un nuevo consumidor con necesidades muy distintas. El lector de un medio tradicional se encuentra con contenido cerrado, sin posibilidad de ser filtrado, que busca dirigir su opinión. Con el método tradicional no es posible ni personalizar el contenido ni la experiencia de uso. De ahí el nacimiento de la web 2.0, personas conectándose a personas (redes sociales). En un futuro cercano, van a triunfar las empresas, sectores y marcas que sepan adaptarse a la llegada de los social media, y que además de desarrollar su línea de negocio habitual, se conviertan en plataformas para la conversación y la construcción de contenidos en colaboración. En este proyecto voy a desarrollar el caso particular de una empresa de telecomunicaciones con una estrategia que use los social media como plataforma de atención al cliente, y para interaccionar también con su almacén en DHL. Los servicios añadidos que dicha empresa de telecomunicaciones ofrece a sus seguidores, clientes externos e internos se pueden agrupar en las siguientes funcionalidades:  Hacer un volcado del sistema de gestión de incidencias de una empresa de telecomunicaciones en las redes sociales, a través de mensajes privados. Dichos mensajes privados se enviarán a las páginas de Facebook y Twitter de los clientes.  Seguimiento por parte del cliente de puestas en marcha de los nuevos servicios a través de mensajes privados en Facebook y Twitter. Mediante este servicio el cliente podrá comprobar a través de las redes sociales el estado de su pedido e intercambiar información de utilidad con la empresa.  Desarrollar a través de las redes sociales una herramienta de marketing para interaccionar con los clientes y posibles seguidores. A través de los canales de los social media se proporciona a los seguidores información de valor sobre novedades del mercado de las telecomunicaciones, soporte técnico, dudas, consejos sobre implementaciones técnicas, equipos de telecomunicaciones,.etc.Es decir, crear una plataforma de conversación entre usuarios, que aporte a los seguidores conocimientos y soluciones útiles para la problemática de sus negocios.  Usar Facebook como base de datos y medio de comunicación entre nuestra empresa de telecomunicaciones y el almacén externalizado en DHL. Supongo que la primera pregunta que debo responder sería, ¿por qué un cliente de una empresa de telecomunicaciones estaría interesado en seguir a su proveedor a través de redes sociales? Facebook tiene en 2014 1,28 billones de usuarios activos. Twitter, la cuarta plataforma social por número de usuarios tras Facebook, alcanzó los 255 millones de usuarios en los primeros meses de 2014. La segunda red social en número de seguidores es Youtube, con un billón de usuarios. El 61,5% de los usuarios de Facebook visita la red todos los días. Los twitteros envían 110 millones tweets por día, tienen fama de muy activos, especialmente por la mañana. En 60 días, se sube más contenido de vídeo a YouTube que el producido por las tres principales cadenas de televisión estadounidense durante 60 años. Como conclusión, las redes sociales están ganando cada día más terreno, es un entorno de comunicación bidireccional en auge cada vez más extendido, por lo cual los usuarios no tienen que dedicar tiempo extra a conocer la herramienta de atención al cliente de su empresa, al usar ésta un canal fácil, conocido, rápido, versátil y gratuito como son las redes sociales. ABSTRACT. Social media are platforms of online communication where content is created by users themselves using technologies of web 2.0, which facilitate the editing, publication and the exchange of information, so that the social media are democratizing communications. According to data published by eMarketer, nearly 25% of the total global ad spend for 2014 will target digital media. The traditional media are trapped for some time in deep crisis. In the early days of the internet, the players of the sector have believed in the network as a means of publishing content in a single direction, this is the web 1.0, connecting people to websites. The typical magazine reader has become a new consumer with very different needs. Traditional medium readers encounter a closed content, unable to be filtered, which seeks handle their opinion. The traditional method doesn’t allow to customize the content and user experience. Hence the birth of Web 2.0, connecting people to people. In the near future, will succeed companies, sectors and brands who can adapt to the advent of social media, and further to develop their line of business as usual, become platforms for conversation and building collaborative content. In this project I will develop the particular case of a telecommunications company with a strategy to use social media as a platform for Customer Service, and also to interact with DHL warehouse. The additional services that the company offers telecommunications followers, external and internal customers can be grouped into the following functionality:  Make a dump of the incident management system of a telecommunications company in social networks through private messages. These private messages are sent Facebook and Twitter clients.  Monitoring by the client launched new services through private messages on Facebook and Twitter. Through this service, customers can check through the social networks of your order status and share useful information with the company.  Develop through social media as a marketing tool to interact with customers and potential followers.Our telco will provide to followers through social media channels valuable information on market developments in telecommunications, technical support, questions, advice on technical implementations, telecommunications equipment,etc. Then we create a platform for discussion between users, to provide followers useful knowledge and solutions to their business problems.  Use Facebook as a database and means of communication between our telco and outsourced telecommunications in DHL warehouse. I guess the first question that must be answered is why a customer of a telecommunications company would be interested in following your provider via social networks. Facebook has 1.28 billion active users in 2014. Twitter, the fourth social platform for many users after Facebook reached 255 million users in the first months of 2014. The second social network on number of followers is YouTube, with a billion users. 61.5% of Facebook users visit the network every day. The twitter users send 110 million tweets per day, have a reputation for very active, especially in the morning. In 60 days, it is produced more video content to YouTube by the three major US television for 60 years. In conclusion, social networks are gaining more ground every day. It is an environment of two-way communication on the rise, so users do not have to spend extra time to learn the tool of Customer Care telco, by using this easy, known, fast, versatile and free channels as are social networks.

Mass spectrometric evidence for the enzymatic mechanism of the depolymerization of heparin-like glycosaminoglycans by heparinase II

Heparin-like glycosaminoglycans, acidic complex polysaccharides present on cell surfaces and in the extracellular matrix, regulate important physiological processes such as anticoagulation and angiogenesis. Heparin-like glycosaminoglycan degrading enzymes or heparinases are powerful tools that have enabled the elucidation of important biological properties of heparin-like glycosaminoglycans in vitro and in vivo. With an overall goal of developing an approach to sequence heparin-like glycosaminoglycans using the heparinases, we recently have elaborated a mass spectrometry methodology to elucidate the mechanism of depolymerization of heparin-like glycosaminoglycans by heparinase I. In this study, we investigate the mechanism of depolymerization of heparin-like glycosaminoglycans by heparinase II, which possesses the broadest known substrate specificity of the heparinases. We show here that heparinase II cleaves heparin-like glycosaminoglycans endolytically in a nonrandom manner. In addition, we show that heparinase II has two distinct active sites and provide evidence that one of the active sites is heparinase I-like, cleaving at hexosamine–sulfated iduronate linkages, whereas the other is presumably heparinase III-like, cleaving at hexosamine–glucuronate linkages. Elucidation of the mechanism of depolymerization of heparin-like glycosaminoglycans by the heparinases and mutant heparinases could pave the way to the development of much needed methods to sequence heparin-like glycosaminoglycans.

Synthesis and screening of small molecule libraries active in binding to DNA

Five synthetic combinatorial libraries of 2,080 components each were screened as mixtures for inhibition of DNA binding to two transcription factors. Rapid, solution-phase synthesis coupled to a gel-shift assay led to the identification of two compounds active at a 5- to 10-μM concentration level. The likely mode of inhibition is intercalation between DNA base pairs. The efficient deconvolution through sublibrary synthesis augurs well for the use of large mixtures of small, nonpeptide molecules in biological screens.

Structural basis for heterogeneous kinetics: Reengineering the hairpin ribozyme

The RNA cleavage reaction catalyzed by the hairpin ribozyme shows biphasic kinetics, and chase experiments show that the slow phase of the reaction results from reversible substrate binding to an inactive conformational isomer. To investigate the structural basis for the heterogeneous kinetics, we have developed an enzymatic RNA modification method that selectively traps substrate bound to the inactive conformer and allows the two forms of the ribozyme-substrate complex to be separated and analyzed by using both physical and kinetic strategies. The inactive form of the complex was trapped by the addition of T4 RNA ligase to a cleavage reaction, resulting in covalent linkage of the 5′ end of the substrate to the 3′ end of the ribozyme and in selective and quantitative ablation of the slow kinetic phase of the reaction. This result indicates that the inactive form of the ribozyme-substrate complex can adopt a conformation in which helices 2 and 3 are coaxially stacked, whereas the active form does not have access to this conformation, because of a sharp bend at the helical junction that presumably is stabilized by inter-domain tertiary contacts required for catalytic activity. These results were used to improve the activity of the hairpin ribozyme by designing new interfaces between the two domains, one containing a non-nucleotidic orthobenzene linkage and the other replacing the two-way junction with a three-way junction. Each of these modified ribozymes preferentially adopts the active conformation and displays improved catalytic efficiency.

Human fatty acid synthase: Role of interdomain in the formation of catalytically active synthase dimer

The human and animal fatty acid synthases are dimers of two identical multifunctional proteins (Mr 272,000) arranged in an antiparallel configuration. This arrangement generates two active centers for fatty acid synthesis separated by interdomain (ID) regions and predicts that two appropriate halves of the monomer should be able to reconstitute an active fatty acid synthesizing center. This prediction was confirmed by the reconstitution of the synthase active center by using two heterologously expressed halves of the monomer protein. Each of these recombinant halves of synthase monomer contains half of the ID regions. We show here that the fatty acid synthase activity could not be reconstituted when the ID sequences present in the two recombinant halves are deleted, suggesting that these ID sequences are essential for fatty acid synthase dimer formation. Further, we confirm that the ID sequences are the only regions of fatty acid synthase monomers that showed significant dimer formation, by using the yeast two-hybrid system. These results are consistent with the proposal that the ID region, which has no known catalytic activity, associates readily and holds together the two dynamic active centers of the fatty acid synthase dimer, therefore playing an important role in the architecture of catalytically active fatty acid synthase.

Identification of a functionally important sequence in the cytoplasmic tail of integrin beta 3 by using cell-permeable peptide analogs.

Integrins are major two-way signaling receptors responsible for the attachment of cells to the extracellular matrix and for cell-cell interactions that underlie immune responses, tumor metastasis, and progression of atherosclerosis and thrombosis. We report the structure-function analysis of the cytoplasmic tail of integrin beta 3 (glycoprotein IIla) based on the cellular import of synthetic peptide analogs of this region. Among the four overlapping cell-permeable peptides, only the peptide carrying residues 747-762 of the carboxyl-terminal segment of integrin beta 3 inhibited adhesion of human erythroleukemia (HEL) cells and of human endothelial cells (ECV) 304 to immobilized fibrinogen mediated by integrin beta 3 heterodimers, alpha IIb beta 3, and alpha v beta 3, respectively. Inhibition of adhesion was integrin-specific because the cell-permeable beta 3 peptide (residues 747-762) did not inhibit adhesion of human fibroblasts mediated by integrin beta 1 heterodimers. Conversely, a cell-permeable peptide representing homologous portion of the integrin beta 1 cytoplasmic tail (residues 788-803) inhibited adhesion of human fibroblasts, whereas it was without effect on adhesion of HEL or ECV 304 cells. The cell-permeable integrin beta 3 peptide (residues 747-762) carrying a known loss-of-function mutation (Ser752Pro) responsible for the genetic disorder Glanzmann thrombasthenia Paris I did not inhibit cell adhesion of HEL or ECV 304 cells, whereas the beta 3 peptide carrying a Ser752Ala mutation was inhibitory. Although Ser752 is not essential, Tyr747 and Tyr759 form a functionally active tandem because conservative mutations Tyr747Phe or Tyr759Phe resulted in a nonfunctional cell permeable integrin beta 3 peptide. We propose that the carboxyl-terminal segment of the integrin beta 3 cytoplasmic tail spanning residues 747-762 constitutes a major intracellular cell adhesion regulatory domain (CARD) that modulates the interaction of integrin beta 3-expressing cells with immobilized fibrinogen. Import of cell-permeable peptides carrying this domain results in inhibition "from within" of the adhesive function of these integrins.

Estudio de caso de los sMOOC y su pedagogía en el contexto online

En un contexto dominado por las nuevas tecnologías, los MOOCs parecen posicionarse como una alternativa o complemento a la formación tradicional. Se observa sin embargo, que la metodología empleada por este tipo de cursos masivos, no difiere de la comúnmente utilizada en el aula. Este artículo evalúa y describe una nueva tipología de MOOC, denominada Social MOOC, la cual se presenta como disruptiva en cuanto a pedagogía se refiere. A través de la plataforma ECO Learning, se analiza de forma exhaustiva mediante un estudio de caso, la pedagogía empleada y el rol que asume el estudiante en el primer sMOOC llevado a cabo que tuvo lugar durante los meses de marzo y abril de 2015. Se concluye, que la pedagogía empleada en esta nueva versión social de los ya citados MOOC, es innovadora tanto dentro como fuera del contexto digital. Los estudiantes asumen un papel muy activo y la comunicación se torna de un carácter bidireccional entre el facilitador y los mismos.

The isolation and identification of dermatologically active constituents of coal tar

The production and uses of coal tar are reviewed as are the uses of steroids and cytotoxic agents in the treatment of psoriasis with a review of the condition also. An attempt was made to improve the efficaciousness and cosmetic acceptability of a low temperature tar, by screening fractions of this tar, derived from a variety of separation procedures. The most efficacious fraction was the highest boiling acid fraction, which is believed to consist mainly of mono- and di-hydric phenols. A time and concentration study showed that the optimum regime was the application of a 10% concentration in 5% wool fat in soft, yellow paraffin daily for 21 days. The mouse tail skin was selected as an experimental model, to ascertain the efficaciousness of fractions, because of the similarities between this skin and the psoriatic lesion. The activity of a fraction was monitored by the inducement of a granular layer in the mouse tail epidermis. Because coal tar is not an easy medium to work with, and the active fractions showed no increase in cosmetic acceptability over the parent coal tar, likely coal tar constituents were selected for screening on the basis of phenolic character, and the molecular weight range elucidated by mass spectroscopy. 32 potential anti-psoriatic agents were screened on mouse tail. Two catechols, 3,5-di-t-butyl and 4-t-butyl catechols were active. Other structures showed little or no activity. 24 catechols were screened and two extremely active catechols were discovered, 3-methyl-5-t-octyl and 5-methyl-3-t-octyl catechols. The screening of catechol-rich coal tar fractions and a coal tar fraction which had had the catechols removed by oxidation, showed that some anti-psoriatic activity was contained in the catechol fraction of coal tar. Attempts to elucidate the mode of action of these two compounds met with little success, but two modes of action are suggested.

The impact of drug information on the prescribing of drugs

Using prescription analyses and questionnaires, the way drug information was used by general medical practitioners during the drug adoption process was studied. Three new drugs were considered; an innovation and two 'me-too' products. The innovation was accepted by general practitioners via a contagion process, information passing among doctors. The 'me-too' preparations were accepted more slowly and by a process which did not include the contagion effect. 'Industrial' information such as direct mail was used more at the 'awareness' stage of the adoption process while 'professional' sources of information such as articles in medical journals were used more to evaluate a new product. It was shown that 'industrial' information was preferred by older single practice doctors who did not specialise, had a first degree only and who did not dispense their own prescriptions. Doctors were divided into early and late-prescribers by using the date they first prescribed the innovatory drug. Their approach to drug information sources was further studied and it was shown that the early-prescriber issued slightly more prescriptions per month, had a larger list size, read fewer journals and generally rated industrial sources of information more highly than late-prescribers. The prescribing habits of three consultant rheumatologists were analysed and compared with those of the general practitioners in the community which they served. Very little association was noted and the influence of the consultant on the prescribing habits of general practitioners was concluded to be low. The consultants influence was suggested to be of two components, active and passive; the active component being the most influential. Journal advertising and advertisement placement were studied for one of the 'me-too' drugs. It was concluded that advertisement placement should be based on the reading patterns of general practitioners and not on ad-hoc data gathered by representatives as was the present practice. A model was proposed relating the 'time to prescribe' a new drug to the variables suggested throughout this work. Four of these variables were shown to be significant. These were, the list size, the medical age of the prescriber, the number of new preparations prescribed in a given time and the number of partners in the practice.

Analysis and Optimization of Synthetic Aperture Ultrasound Imaging Using the Effective Aperture Approach

An effective aperture approach is used as a tool for analysis and parameter optimization of mostly known ultrasound imaging systems - phased array systems, compounding systems and synthetic aperture imaging systems. Both characteristics of an imaging system, the effective aperture function and the corresponding two-way radiation pattern, provide information about two of the most important parameters of images produced by an ultrasound system - lateral resolution and contrast. Therefore, in the design, optimization of the effective aperture function leads to optimal choice of such parameters of an imaging systems that influence on lateral resolution and contrast of images produced by this imaging system. It is shown that the effective aperture approach can be used for optimization of a sparse synthetic transmit aperture (STA) imaging system. A new two-stage algorithm is proposed for optimization of both the positions of the transmitted elements and the weights of the receive elements. The proposed system employs a 64-element array with only four active elements used during transmit. The numerical results show that Hamming apodization gives the best compromise between the contrast of images and the lateral resolution.