Dress- and Auto- Makers in the “Free Trade” Arena

Even though there have been many studies on the impact of trade liberalisation on labour standards, most of the studies are at national level, and there is a lack of research at industry level. This paper examines the impact of free trade on labour standards in capital- and labour-intensive industries in a developing country. For empirical findings, I take the case of the garment industry, representing labour-intensive industry, and automotive industry, representing capital-intensive industry, in Indonesia in the face of ASEAN Free Trade Area (AFTA). Since the garment industry is a women-dominated industry, while the automotive industry is a men-dominated industry, this paper also employs a feminist perspective. As such, this paper also investigates whether free trade equally affects men and women workers. Besides free trade, other independent variables are also taken into account. Employing quantitative and qualitative methods, empirical evidence shows that there is an indication that free trade has a negative relationship with labour standards in the garment industry, whereas a positive relationships with labour standards in the automotive industry. This implies that free trade might result in decreasing labour standards in labour-intensive industry, while increasing standards in capital-intensive industry. It can also be inferred that free trade unequally affect men and women workers, in that women workers bear the brunt of free trade. The results also show that other internal and external independent variables are indicated to have relationships with labour standards in the garment and automotive industries. Therefore, these variables need to be considered in examining the extent of the impact of free trade on labour standards in labour- and capital-intensive industries.

FastAero – A Precorrected FFT – Fast Multipole Tree Steady and Unsteady Potential Flow Solver

In this paper a precorrected FFT-Fast Multipole Tree (pFFT-FMT) method for solving the potential flow around arbitrary three dimensional bodies is presented. The method takes advantage of the efficiency of the pFFT and FMT algorithms to facilitate more demanding computations such as automatic wake generation and hands-off steady and unsteady aerodynamic simulations. The velocity potential on the body surfaces and in the domain is determined using a pFFT Boundary Element Method (BEM) approach based on the Green’s Theorem Boundary Integral Equation. The vorticity trailing all lifting surfaces in the domain is represented using a Fast Multipole Tree, time advected, vortex participle method. Some simple steady state flow solutions are performed to demonstrate the basic capabilities of the solver. Although this paper focuses primarily on steady state solutions, it should be noted that this approach is designed to be a robust and efficient unsteady potential flow simulation tool, useful for rapid computational prototyping.

On blame-freeness and reciprocity: an experimental study

The theory of reciprocity is predicated on the assumption that people are willing to reward nice or kind acts and to punish unkind ones. This assumption raises the question as to how to define kindness. In this paper we offer a new definition of kindness that we call “blame-freeness.” Put most simply, blame-freeness states that in judging whether player i has been kind or unkind to player j in a social situation, player j would have to put himself in the strategic position of player i, while retaining his preferences, and ask if he would have acted in a manner that was worse than i did under identical circumstances. If j would have acted in a more unkind manner than i acted, then we say that j does not blame i for his behavior. If, however, j would have been nicer than i was, then we say that “j blames i” for his actions (i’s actions were blameworthy). We consider this notion a natural, intuitive and empirically relevant way to explain the motives of people engaged in reciprocal behavior. After developing the conceptual framework, we then test this concept in a laboratory experiment involving tournaments and find significant support for the theory.

An exploratory assessment of the potential impact of the free trade area of the americas on the andean community

A través de una simulación llevada a cabo con GTAP, este documento presenta una evaluación preliminar del impacto potencial que el Área de Libre Comercio de las Américas tendría sobre la Comunidad Andina de Naciones. Mantenido por la Universidad de Purdue, el GTAP es un modelo multiregional de equilibrio general, ampliamente usado para el análisis de temas de economía internacional. El experimento llevado a cabo tiene lugar en un ambiente de competencia perfecta y rendimientos constantes a escala y consiste en la completa eliminación de aranceles a las importaciones de bienes entre los países del Hemisferio Occidental. Los resultados muestran la presencia de modestas pero positivas ganancias netas de bienestar para la Comunidad Andina, generadas fundamentalmente por mejoras en la asignación de recursos. Movimientos desfavorables en los términos de intercambio y el efecto de la desviación de comercio con respecto a terceros países, reducen considerablemente las ganancias potenciales de bienestar. De la misma forma, la existencia de distorsiones económicas al interior de la Comunidad Andina tiene un efecto negativo sobre el bienestar. El patrón de comercio aumenta su grado de concentración en el comercio bilateral con los Estados Unidos y la remuneración real a los factores productivos presenta mejoras con la implementación de la zona de libre comercio.

Irrigation performance and gross water productivity in furrow-irrigated ornamental tree production

In the ornamental plant production region of Girona (Spain), which is one of the largest of its kind in southern Europe, most of the surface is irrigated using wide blocked-end furrows. The objectives of this paper were: (1) to evaluate the irrigation scheduling methods used by ornamental plant producers; (2) to analyse different scenarios in order to assess how they affect irrigation performance; (3) to evaluate the risk of deep percolation; and (4) to calculate gross water productivity. A two-year study in a representative commercial field, planted with Prunus cerasifera ‘Nigra’, was carried out. The irrigation dose applied by the farmers was slightly smaller than the required water dose estimated by the use of two different methods: the first based on soil water content, and the second based on evapotranspiration. Distribution uniformity and application efficiency were high, with mean values above 87%. Soil water content measurements revealed that even at the end of the furrow, where the infiltrated water depth was greatest, more than 90% of the infiltrated water was retained in the shallowest 40 cm of the soil; accordingly, the risk of water loss due to deep percolation was minimal. Gross water productivity for ornamental tree production was € 11.70 m–3, approximately 20 times higher than that obtained with maize in the same region

Effects of antioxidant enzyme inhibitors on free radical levels in mice and possible clinical applications for decreasing ROS damage in the cochlea

This paper examines an experiment to determine if impairment of antioxident protective agents resulted in elevated ROS levels in mice.

Productivity, labour cost and export adjustment: Detailed results for 24 EU countries. Bruegel Working Paper 2012/11, 12 July 2012

As a background document for Bruegel Policy Contribution 2012/11 ‘Compositional effects on productivity, labour cost and export adjustment’, this working paper presents detailed results for 24 EU countries on: • The sectoral changes in the economy; • The unit labour costs (ULC) based real effective exchange rate (REER) and its main components; • Export performance. • The ULC-REERs are calculated: • For the total economy, the business sector (excluding agriculture, construction and real estate activities), and some main sectors; • Using both actual aggregates and fixed-weight aggregates, as the latter are free from the impacts of compositional changes; • Against 30 trading partners and against three subsets of trading partners: euro-area, non-euro area EU, non-EU.

Free and Fair? A Challenge for the EU as Georgia and Ukraine gear up for elections. CEPS Commentary, 27 September 2012

In an important test for democracy, Georgia and Ukraine will go to the polls for parliamentary elections on the 1st and 28th of October, respectively. The political leaders of these two Eastern Partnership countries have committed themselves to European values and principles – rhetorically. In reality, the promise of their colour revolutions is unrealised and they have shifted further towards authoritarianism, albeit following different paths in their respective post-revolution periods.

The post-Lisbon role of the European Parliament in the EU's Common Commercial Policy: Implications for bilateral trade negotiations. EU Diplomacy Paper 05/2012, July 2012

This paper sets out to conduct an empirical analysis of the post-Lisbon role of the European Parliament (EP) in the EU’s Common Commercial Policy through an examination of the ‘deep and comprehensive’ bilateral Free Trade Agreements (FTAs) currently negotiated as part of the EU’s Global Europe strategy. The EU-Korea and EU-India FTAs are used as case studies in order to determine the implications of the EP’s enhanced trade powers on the processes, actors and outcomes of EU bilateral trade policy. The EP is now endowed with the ‘hard power’ of consent in the ratification phase of FTAs, acting as a threat to strengthen its ‘soft power’ to influence negotiations. The EP is developing strategies to influence the mandate and now plays an important role in the implementation of FTAs. The entry of this new player on the Brussels trade policy field has brought about a shift in the institutional balance of power and opened up the EP as a new point of access for trade policy lobbyists. Finally, increased EP involvement in EU trade policy has brought about a politicisation of EU trade policy and greater normative outcomes of FTAs.

Wiggle-match dating of tree-ring sequences

Given the non-monotonic form of the radiocarbon calibration curve, the precision of single C-14 dates on the calendar timescale will always be limited. One way around this limitation is through comparison of time-series, which should exhibit the same irregular patterning as the calibration curve. This approach can be employed most directly in the case of wood samples with many years growth present (but not able to be dated by dendrochronology), where the tree-ring series of unknown date can be compared against the similarly constructed C-14 calibration curve built from known-age wood. This process of curve-fitting has come to be called "wiggle-matching." In this paper, we look at the requirements for getting good precision by this method: sequence length, sampling frequency, and measurement precision. We also look at 3 case studies: one a piece of wood which has been independently dendrochronologically dated, and two others of unknown age relating to archaeological activity at Silchester, UK (Roman) and Miletos, Anatolia (relating to the volcanic eruption at Thera).

Efficient tree construction for the multicast problem

A new heuristic for the Steiner Minimal Tree problem is presented here. The method described is based on the detection of particular sets of nodes in networks, the “Hot Spot” sets, which are used to obtain better approximations of the optimal solutions. An algorithm is also proposed which is capable of improving the solutions obtained by classical heuristics, by means of a stirring process of the nodes in solution trees. Classical heuristics and an enumerative method are used CIS comparison terms in the experimental analysis which demonstrates the goodness of the heuristic discussed in this paper.

Inbreeding depression and founder diversity among captive and free-living populations of the endangered pink pigeon Columba mayeri

The endemic pink pigeon has recovered from less than 20 birds in the mid-1970s to 355 free-living individuals in 2003. A major concern for the species' recovery has been the potential genetic problem of inbreeding. Captive pink pigeons bred for reintroduction were managed to maximise founder representation and minimise inbreeding. In this paper, we quantify the effect of inbreeding on survival and reproductive parameters in captive and wild populations and quantify DNA sequence variation in the mitochondrial d-loop region for pink pigeon founders. Inbreeding affected egg fertility, squab, juvenile and adult survival, but effects were strongest in highly inbred birds (F≥0.25). Inbreeding depression was more apparent in free-living birds where even moderate levels of inbreeding affected survival, although highly inbred birds were equally compromised in both captive and wild populations. Mitochondrial DNA haplotypic diversity in pink pigeon founders is low, suggesting that background inbreeding is contributing to low fertility and depressed productivity in this species, as well as comparable survival of some groups of non-inbred and nominally inbred birds. Management of wild populations has boosted population growth and may be required long-term to offset the negative effects of inbreeding depression and enhance the species' survival.

Threshold-free object and ground point separation in LIDAR data

Light Detection And Ranging (LIDAR) is an important modality in terrain and land surveying for many environmental, engineering and civil applications. This paper presents the framework for a recently developed unsupervised classification algorithm called Skewness Balancing for object and ground point separation in airborne LIDAR data. The main advantages of the algorithm are threshold-freedom and independence from LIDAR data format and resolution, while preserving object and terrain details. The framework for Skewness Balancing has been built in this contribution with a prediction model in which unknown LIDAR tiles can be categorised as “hilly” or “moderate” terrains. Accuracy assessment of the model is carried out using cross-validation with an overall accuracy of 95%. An extension to the algorithm is developed to address the overclassification issue for hilly terrain. For moderate terrain, the results show that from the classified tiles detached objects (buildings and vegetation) and attached objects (bridges and motorway junctions) are separated from bare earth (ground, roads and yards) which makes Skewness Balancing ideal to be integrated into geographic information system (GIS) software packages.

Compression of polyelectrolyte brushes in a salt-free theta solvent

This paper examines the normal force between two opposing polyelectrolyte brushes and the interpenetration of their chains that is responsible for sliding friction. It focuses on the special case of semi-dilute brushes in a salt-free theta solvent, for which Zhulina and Borisov [J. Chem. Phys., {\bf 107}, 5952, (1997)] have derived analytical predictions using the classical strong-stretching theory (SST) introduced by Semenov and developed by Milner, Witten and Cates. Interestingly, the SST predicts that the brushes contract maintaining a polymer-free gap as they are compressed together, which provides an explanation for the ultra-low frictional forces observed in experiment. We examine the degree to which the SST predictions are affected by chain fluctuations by employing self-consistent field theory (SCFT). While the normal force is relatively unaffected, fluctuations are found to have a strong impact on brush interpenetration. Even still, the contraction of the brushes does significantly prolong the onset of interpenetration, implying that a sizeable normal force can be achieved before the sliding friction becomes significant.