How to increase reach efficiency and effectiveness of MEO’s digital marketing campaigns?

Field lab: Business project

Assessment of the efficiency of prefabricated hybrid composite plates (HCPs) for retrofitting of damaged interior RC beam–column joints

The effectiveness of prefabricated hybrid composite plates (HCPs) as a seismic retrofitting solution for damaged interior RC beam-column joints is experimentally studied. HCP is composed of a thin plate made of strain hardening cementitious composite (SHCC) reinforced with CFRP sheets/laminates. Two full-scale severely damaged interior beam-column joints are retrofitted using two different configurations of HCPs. The effectiveness of these retrofitting solutions mainly in terms of hysteretic response, dissipated energy, degradation of secant stiffness, displacement ductility and failure modes are compared to their virgin states. According to these criteria, both solutions resulted in superior responses regarding the ones registered in their virgin states.

Evaluation of foamed bitumen efficiency in warm asphalt mixtures recycling

The recycling of pavements is nowadays a very important question to the road paving industry. With the objective of incorporating higher percentages of reclaimed asphalt (RA) materials in recycled asphalt mixtures, new techniques have been developed in the last years. The use of foamed bitumen is normally associated with the production of cold asphalt mixtures, which usually show lower quality standards. However, the objective of the work presented in this paper is to assess the use of foamed bitumen as the binder of warm asphalt mixtures incorporating 30% RA, which have quality standards similar to those of conventional mixtures. Thus, five mixtures have been produced with 30% RA, one of them with a conventional bitumen (control mix) and the others with foamed bitumen at different production temperatures. The mixtures were tested for compactability and water sensitivity and the results show a possible reduction of 25 ºC in the production temperatures, while the water sensitivity test results were kept close to 90 %.

Biomass accumulation, photochemical efficiency of photosystem II, nutrient contents and nitrate reductase activity in young rosewood plants (Aniba rosaeodora Ducke) submitted to different NO3-:NH4+ ratios

The rosewood (Aniba rosaeodora Ducke) is a native tree species of Amazon rainforest growing naturally in acidic forest soils with reduced redox potential. However, this species can also been found growing in forest gaps containing oxide soils. Variations in the forms of mineral nitrogen (NO3- or NH4+) may be predicted in these different edaphic conditions. Considering that possibility, an experiment was carried out to analyze the effects of different NO3-:NH4+ ratios on the growth performance, mineral composition, chloroplastid pigment contents, photochemical efficiency photosystem II (PSII), and nitrate redutase activity (RN, E.C.1.6.6.1) on A. rosaeodora seedlings. Nine-month-old seedlings were grown in pots with a washed sand capacity of 7.5 kg and submitted to different NO3-:NH4+ ratios (T1 = 0:100%, T2 = 25:75%, T3 = 50:50%, T4 = 75:25%, and T5 = 100:0%). The lowest relative growth rate was observed when the NO3-:NH4+ ratio was equal to 0:100%. In general, high concentrations of NO3- rather than NH4+ favored a greater nutrient accumulation in different parts of the plant. For the chloroplastid pigment, the highest Chl a, Chl b, Chl tot, Chl a/b and Chl tot/Cx+c contents were found in the treatment with 75:25% of NO3-:NH4+, and for Chl b and Cx+c it was observed no difference. In addition, there was a higher photochemical efficiency of PSII (Fv/Fm) when high NO3- concentrations were used. A linear and positive response for the nitrate reductase activity was recorded when the nitrate content increased on the culture substrate. Our results suggest that A. rosaeodora seedlings have a better growth performance when the NO3- concentrations in the culture substrate were higher than the NH4+ concentrations.

The importance of the category of consciousness and education for sustainability in methodologies for eco‐efficiency in school buildings

This document reports the importance of the category of consciousness and education for sustainability in the school environment. Education in school has a potential to make the benefits of the building construction visible for society and media, showing to the students, parents and communities how sustainability in built environment could improve the people life in economic, social and environment aspects. Thus, this paper addresses the main events related to sustainability, such as the Stockholm Conference, the Brundtland report, United Nations Conference on Environment and Development (UNCED) and Agenda 21, until reaching the necessity of the elaboration of Methodologies for environmental assessment of building, and later, the development of the specific methodologies according to the buildings. It is also described some examples of sustainability in schools in Germany, Finland and Italy and what kind of sustainable systems those countries are currently using.

Discussing Chevalier’s data on the efficiency of tariffs for american and french canals in the 1830s

This article revisits Michel Chevalier’s work and discussions of tariffs. Chevalier shifted from Saint-Simonism to economic liberalism during his life in the 19th century. His influence was soon perceived in the political world and economic debates, mainly because of his discussion of tariffs as instruments of efficient transport policies. This work discusses Chevalier’s thoughts on tariffs by revisiting his masterpiece, Le Cours d’Économie Politique. Data Envelopment Analysis (DEA) was conducted to test Chevalier’s hypothesis on the inefficiency of French tariffs. This work showed that Chevalier’s claims on French tariffs are not validated by DEA.

Trap efficiency evaluation for small mammals in the southern Amazon

The effectiveness of ecological researches on small mammals strongly depends on trapping techniques to survey communities and populations accurately. The main goal of this study was to assess the efficiency of three types of traps (Sherman, Tomahawk and Pitfall) to capture non-volant small mammals. We installed traps in 22 forest fragments in the southern Brazilian Amazonia. We captured 873 individuals belonging to 21 species; most of the individuals (N = 369) and species (N = 19) were trapped using Pitfalls, followed by Shermans (N = 271 individuals; N = 15 species) and Tomahawks (N = 233 individuals; N = 15 species). Pitfalls trapped a richer community subset of small mammals than the two other types of traps, and a more abundant community subset than Tomahawks. Proechimys sp. was the most abundant species trapped (N = 125) and Tomahawk was the most efficient type of trap to capture this species (N = 97 individuals). Neacomys spinosus and Marmosops bishopi were more trapped in Pitfalls (N = 92 and 100 individuals, respectively) than Shermans and Tomahawks. Monodelphis glirina was more trapped in Shermans and Pitfalls than Tomahawks. Species composition trapped using the three types of traps were distinct. Pitfalls captured a more distinct subset of the small mammal community than the two other live traps. We recommend the association of the three types of traps to reach a more comprehensive sampling of the community of small mammals. Thus, as stated by previous studies, we also recommend the complementary use of Shermans, Tomahawks and Pitfalls to account for a thorough sampling of the whole small mammal community in researches conducted in the tropical forests of Amazonia.

Hot-dip galvanized steel dip-coatedwith ureasilicate hybrid in simulated concrete pore solution: Assessment of coating morphology and corrosion protection efficiency

The barrier effect and the performance of an organic–inorganic hybrid (OIH) sol–gel coating are highlydependent on the coating deposition method as well as processing conditions. In this work, studies onthe influence of experimental parameters using the dip coating method were performed. Factors suchas residence time (Rt), a curing step between each dip step and the number of layers of sol–gel OIHfilms deposited on HDGS to prevent corrosion in highly alkaline environments were studied. These OIHcoatings were obtained using a functionalized siloxane, 3-isociantepropyltriethoxysilane that reactedwith a diamino-functionalized oligopolymer (Jeffamine®D-230). The barrier efficiency of OIH coatings insimulated concrete pore solutions (SCPS) was assessed in the first moments of contact, by electrochemicalimpedance spectroscopy and potentiodynamic methods. The durability and stability of the OIH coatings inSCPS was monitored during eight days by macrocell current density. The morphological characterizationof the surface was performed by scanning electronic microscopy before and after exposure to SCPS.Glow discharge optical emission spectroscopy was used to obtain quantitative composition profiles toinvestigate the thickness of the OIH coatings as a function of the number of layers deposited and theinfluence of the Rt in the coating thickness.

Cost efficiency and resistance to chemical attack of a fly ash geopolymeric mortar versus epoxy resin and acrylic paint coatings

This article presents results of an experimental investigation on the resistance to chemical attack (with sulphuric, hydrochloric and nitric acid) of several materials: OPC concrete, high-performance concrete, epoxy resin, acrylic painting and a fly ash-based geopolymeric mortar). Three types of acids with three high concentrations (10, 20 and 30%) were used to simulate long-term degradation. A cost analysis was also performed. The results show that the epoxy resin has the best resistance to chemical attack independently of the acid type and the acid concentration. However, the cost analysis shows that the epoxy resin-based solution is the least cost-efficient solution being 70% above the cost efficiency of the fly ash-based geopolymeric mortar.

Study of the of the concept of community buildings and its importance for land use efficiency

Nowadays cities are facing several environmental problems due to the population migration to urban areas, which is causing urban sprawl. This way, it is very important to define solutions to improve Land Use Efficiency (LUE). This article proposes the use of community buildings features as a solution to increase land use efficiency. Community buildings consider the design of shared building spaces to reduce the floor area of buildings. This work tests the performance of some case-study buildings regarding LUE to analyse its possible pros and cons. A quantifiable method is used to assess buildingsâ LUE, which considers the number of occupants, the gross floor area, the functional area, the implantation area and the allotment area. Buildings with higher values for this index have reduced environmental impacts because they use less construction materials, produce less construction and demolition wastes and require less energy for building operation. The results showed that the use of community building features can increase Land Use Efficiency of buildings.

Sefficiency (sustainable efficiency) of water–energy–food entangled systems

Supplemental data for this article can be accessed at http://dx.doi.org/10.1080/07900627.2015.1070091. It includes an easy-to-use spreadsheet that calculates the efficiencies used in this paper, that is Sefficiency with energy considerations.

Incorporation of hybrid phase change materials in plastering mortars for increased energy efficiency in buildings

Tese de Doutoramento em Engenharia Civil.

Terapéutica racional, mediante indicadores de eficacia antimicrobiana, de la mastitis caprina utilizando marbofloxacina y cefquinoma. Rational therapeutics, indicators of antimicrobial efficiency in the mastitis goats using marbofloxacine and cefquinome

La producción de leche de cabra es considerada en nuestro país, y en la provincia de Córdoba, una alternativa productiva para el desarrollo sustentable y socio – económico de la población. Por otra parte, existe una mayor demanda del mercado nacional e internacional de esta leche, por lo que los productores deben garantizar la seguridad y calidad de la misma de acuerdo a las normas vigentes. Es por ello que el control y tratamiento de las diferentes enfermedades es de vital importancia tanto para maximizar la producción del hato como para cumplir con los cánones de seguridad exigidos. En este contexto la mastitis caprina es una de las enfermedades que afecta la productividad del sector, y para controlarla una de las medidas a emplear es la terapéutica con antimicrobianos. Se trabajará en este proyecto con marbofloxacina y cefquinoma, estableciendo pautas racionales (eficaces y seguras) para su empleo en la afección a nivel regional. Los indicadores de eficacia estarán fijados de acuerdo a los parámetros integrados de farmacocinética (FC) y farmacodinamia (FD). Estos últimos (FD) serán calculados a través de la determinación concentraciones inhibitorias mínimas de cepas bacterianas aisladas de mastitis caprinas en Córdoba. Se establecerán los parámetros farmacocinéticos a dosis únicas y múltiples para la marbofloxacina (5 mg/kg IV, IM) y cefquinoma (2 mg/kg IV, IM e IMM) a partir de muestras de suero y leche de cabras Anglo Nubian (n = 6 por antimicrobiano; diseño cruzado en función de la ruta de administración). Se determinarán sus concentraciones en dichos fluidos, por cromatografía líquida de alta precisión. Los resultados FC/FD para ambos medicamentos se compararán con parámetros recomendados por expertos para cada tipo de antimicrobiano y se utilizarán como medida para recomendar una terapéutica racional, fundamental para optimizar la posología, garantizar la eficacia clínica, y reducir al mínimo la selección y propagación de cepas resistentes de agentes patógenos. The production of milk of goat is considered the province of Cordoba, a productive alternative for the sustainable development and partner - economically of the population. There is a major demand of the domestic and international market of this milk, for what the producers must guarantee the safety and quality of the same one of agreement to the in force procedure. It is for it that the control and treatment of the different diseases performs vital importance so much to maximize the production of the herd as to expire with the safety demanded. In this context the mastitis goat is one of the diseases that affect the productivity of the sector, and to control her one of the measures to using is the therapeutics with antimicrobial. One will be employed at this project with marbofloxacine and cefquinome, establishing rational guidelines (effective and sure) for his employment in the affection to regional level. The indicators of efficiency will be fixed in agreement to the integrated parameters of pharmacokinetics (PK) and pharmacodinamics (PD). The latter (PK) will be calculated across the determination inhibitory minimal concentrations of bacterial strains isolated of mastitis goat in Córdoba. The parameters will be established pharmacokinetics to the only and multiple doses for the marbofloxacine (5 mg/kg the IV, IM) and cefquinome (2 mg/kg the IVth, IM and IMM), From samples of whey and milk of goats Anglo Nubian (n = 6 for antimicrobial; design crossed depending on the route of administration). Its concentrations will decide in the above mentioned fluids, for liquid chromatography of high precision. The results PK/PD for both antimicrobial will be compared with parameters recommended by experts for every type of antimicrobial and will be in use as measure for recommending a rational, fundamental therapeutics for optimizing the dosage, for guaranteeing the clinical efficiency, and to reduce to the minimum the selection and spread of resistant of pathogenic agents.

The effects of detergent loading on rotating biological contactor (RBC) wastewater treatment efficiency

There are presently over 182 RBC plants, treating domestic wastewater, in the Republic of Ireland, 136 of which have been installed since 1986. The use of this treatment plant technology, although not new, is becoming increasingly popular. The aim of this research was to assess the effects that a household detergent has on rotating biological contractor treatment plant efficiency. Household detergents contribute phosphorus to the surrounding environment and can also remove beneficial biomass from the disc media. A simple modification was made to a conventional flat disc unit to increase the oxygen transfer of the process. The treatment efficiency of the modified RBC (with aeration cups attached) was assessed against a parallel conventional system, with and without degergent loading. The parameters monitored were chemical oxygen demand (COD), bio-chemical oxygen demand (BOD), nitrates, phosphates, dissolved oxygen, the motors power consumption, pH, and temperature. Some microscopic analysis of the biofilm was also to be carried out. The treatment efficiency of both units was compared, based on COD/BOD removal. The degree of nitrification achievable by both units was also assessed with any fluctuations in pH noted. Monitoring of the phosphorus removal capabilities of both units was undertaken. Relationships between detergent concentrations and COD removal efficiencies were also analysed.